(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
MWI Series (Upper/Lower Division)
- Volume Discount
Space saving with a width of 80 mm is achieved by split wiring in the upper and lower stages. The same number is used for the connector number and the terminal block name plate. Equipped with Fujitsu FCN series 40-core connector. Supports both DIN rail mounting and screw mounting.
- For Signal
- Sensor
- PLC
● 80 mm width space-saving design is achieved by separately wiring the upper and lower levels
● Same numbers are adopted for the connector number and terminal block name plate
● Fujitsu FCN series 40 core connector equipped
● Supports both DIN rail mounting and screw mounting
Part Number
Configured Part Number is shown.
MWI-FCN40-HWTB40
Specification Table
| Model | Number of Poles |
| MWI-FCN40-HWTB40 | 40 |
Overview of Specifications
| Model | Number of Poles | Mounting Connector (Fujitsu) Male | Recommended harness | Weight of Connector Terminal Block (g) |
| MWI-FCN40-HWTB40 | 40 | FCN-364P040-AU | NFCN-SS-SO | Approximately 180 |
| Rated Voltage | 125 V AC/DC |
| Rated Current | 1 A |
| Withstand Voltage | 500 V AC for 1 min. |
| Vibration-Resistant | Double amplitude 1.5 mm / 1 hour (10 to 55 Hz/min) |
| Impact-Resistant | 10 G Equivalent |
| Insulation Resistance | 100 MΩ or more (500 V DC megger) |
| Ambient Temperature (Operation) | −20 to +80°C |
| Ambient Temperature (Storage) | −20 to +80°C |
| Relative Temperature | 45 to 85% |
| Pitch Between Terminals | 7 mm |
| Terminal Block Screw | M3 |
| Tightening Torque | 0.6 to 0.9 N·m |
| Conforming Wire | 1.25 mm2 Max |
| (2 mm2 Max: When specified crimp terminal is used) |
| Terminal Block | UL94V-1 (Polycarbonate) |
| Terminal screw | Iron, nickel plating |
| Terminal board | Brass, tin plating |
| Case | UL94V-0 (Polycarbonate) |
Basic Information
| Connector | MIL Connector | Number of connector cores(Pole) | 40 | Mounting Method | DIN rail/Direct attachment |
|---|---|---|---|---|---|
| Pitch Between Terminals(mm) | 7 | Supported equipment | PLC | Dimension width(mm) | 80 |
| Terminal Block Screw | M3 | Dimension vertical(mm) | 86 | Dimension depth(mm) | 42.5 |
| Supported crimp terminal | Y Terminal | Number of terminal block electrodes(Pole) | 40 | Connector Polarity (Mounted Connector) | Female |
| Terminal block screw type | Self-Up |
Please check the type/dimensions/specifications of the part MWI-FCN40-HWTB40 in the MWI Series (Upper/Lower Division) series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- PLC Connector Terminal Block (for OMRON PLC, Output)
- MWS Series (Spring-Loaded), Compatible Crimp Terminals Y terminal/Round terminal
- MWS Series (Spring-Loaded), Terminal Block Screw Type: Spring-Loaded
- MWI Series (Terminal Pitch 7 mm), Compatible Crimp Terminals: Spade
- Connector Terminal Block Conversion Unit XW2R (For General Purpose Use)
- Connector Terminal Block for Control Panels, PM-32 Series
- IM-MDR Half Pitch MDR Connector Terminal Block for Control Panels
- Wire Distribution I/O Direct Connection Connector Terminal Block for FANUC Control
Customers Who Viewed This Item Also Viewed
-
-
-
PX7DW Series Dsub Connector Terminal Block (terminal pitch: 7.62mm)YOSHIDADENKI
Standard Price : MYR 301.74
Days to Ship : 4 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy