(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
PLC Connector Terminal Block (for Mitsubishi Electric, Input/Output) FCN/MIL (MWS-M40HT34-MT-3)
- Volume Discount
A spring-loaded terminal block that can be directly connected to the circuit of a Mitsubishi Electric PLC. It is an input/output PLC connector terminal block allowing lower stage wiring without upper stage terminal wiring getting in the way.
- Connection in Boards
- Space-saving
- PLC
- 125 V
● Uses a 34 pole terminal block for a space-saving width of 125 mm
● Screw hold mechanism with spring reduces work hours
● Simple wire connection with both round and Y shaped terminals
● Lower level wiring can be performed without upper level wiring causing obstruction
● Two types of connector available: FCN and MIL
● Supports both DIN rail mounting and screw mounting
· When connecting, check the specifications of the equipment side before use.
Part Number
Configured Part Number is shown.
MWS-M40HT34-MT-3
Specification Table
| Model | Input Connector | Mass (g) |
| MWS-F40HT34-MT-3 | FCN 40 Core | 181 |
| MWS-M40HT34-MT-3 | MIL 40 Core | 177 |
Overview of Specifications
NFCN-SS-SO
NA40FM-SMIL
| Compatible Mitsubishi Electric PLC |
| QX41, QX42, QX71, QX72, QY71, QY41P, QY42P, QY82P, QH42P, QX82-S1, QX82, QX41-S1, QX42-S1, A1SX41/42/71, A1SY41/42/71, |
A1SH42, AX42, AY42, A1SX41-S1, A1SX41-S2, A1SX42-S1, A1SX42-S2, A1SX82-S1, A1SY41P, A1SY42P, A1SH42-S1LC Series, etc., Wire connection unit is shared. Check the pin assignment on the PLC side before using a PLC not indicated. |
| Rated Voltage | 125 V AC/DC |
| Rated Current | 1 A |
| Withstand Voltage | 500 V AC for 1 min. |
| Insulation Resistance | 1,000 MΩ or more (500 V DC) |
| Terminal screw | M3 (Screw Hold Mechanism With Spring) |
| Tightening Torque | 0.8 N·m max |
| Applicable Wire | AWG 22 to 16 |
| Pitch Between Terminals | 7 mm |
| Ambient Temperature Range | −40°C to +80°C |
| Terminal Block | PBT (G15) |
| Case | PC |
| Substrate | Glass Epoxy (FR4) |
| Screw | Steel, Zinc Plating |
Basic Information
| Number of connector cores(Pole) | 40 | Mounting Method | DIN rail/Direct attachment | Supported equipment manufacturer | Mitsubishi Electric |
|---|---|---|---|---|---|
| Pitch Between Terminals(mm) | 7 | Supported equipment | PLC | Dimension width(mm) | 125 |
| Terminal Block Screw | M3 | Dimension vertical(mm) | 42 | Dimension depth(mm) | 51 |
| Supported crimp terminal | Y Terminal / Round Terminal | Number of terminal block electrodes(Pole) | 34 | Connector Polarity (Mounted Connector) | Female |
| Terminal block screw type | Spring Up |
Please check the type/dimensions/specifications of the part MWS-M40HT34-MT-3 in the PLC Connector Terminal Block (for Mitsubishi Electric, Input/Output) FCN/MIL series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| MWS-F40HT34-MT-3 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Connector |
|---|---|---|---|---|---|
MYR 171.79 | 1 Piece(s) | Available | 4 Day(s) or more | FCN connector |
Additional Products in this Category
- PLC Connector Terminal Block (for OMRON PLC, Output), Mounting Method: DIN Rail / Direct Mount
- MWS Series (Spring-Loaded), Compatible Crimp Terminals: Y terminal/Round terminal
- MWI series (pitch between terminals 7mm), compatible equipment: servo motor
- MWI Series (Pitch between terminals 8.5 mm)
- PX7DS Series FCN Connector Terminal Block (Horizontal Insert/Terminal Pitch: 7.62mm)
- Connector Terminal Block Conversion Unit (Standard Type) XW2B (Standard Type)
- Connector Terminal Block Conversion Unit (Slim Type) XW2D
- PM-601 Series (Sensor / Actuator Station)
Customers Who Viewed This Item Also Viewed
-
MWS Series (Spring-Loaded), Compatible Crimp Terminals Y terminal/Round terminalMISUMI
Standard Price : MYR 95.44-
Days to Ship : 1 Day(s) or more
-
-
PLC Connector Terminal Block (for Mitsubishi Electric PLC, Input/Output), Weight: 150 gMISUMI
Standard Price : MYR 212.22
Days to Ship : 4 Day(s) or more
-
MWS Series (Spring-Loaded), Mounting Method: DIN Rail / Direct MountMISUMI
Standard Price : MYR 183.68
Days to Ship : 4 Day(s) or more
-
Mitsubishi Q Series-compatible cable (with Misumi Original Connector)MISUMI
Days to Ship : 9 Day(s)
-
-
-
-
-
PLC Compatible Cables, Immediate ShipmentMISUMI
Standard Price : MYR 89.43-
Days to Ship : 2 Day(s) or more
-
MWI Series (Terminal Pitch 7 mm), Compatible Crimp Terminals: SpadeMISUMI
Standard Price : MYR 142.43-
Days to Ship : 1 Day(s) or more
-
Cable Clamp with Urethane to Save SpaceMISUMI
Standard Price : MYR 99.10-
Days to Ship : 1 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy