[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Small AC Reversible Motors 6-120W (EA-RM2006-A-A)

Volume Discount

MiSUMi Economy

Small AC Reversible Motors 6-120W launched as MISUMI Economy series
If the shaft end shape is selected A (circular shaft), the gear head cannot be added. To use the gear head, select GN, GU for the shaft end shape.
【Outerline Drawing】
Detailed outline drawings.
Detailed wiring diagrams.
Detailed technical data.
【Usage】
- Used in situations where frequent direction reversal is required, with a friction brake at the rear of the motor.
- Ideal reversible motor for frequent reverse operation.
【Product Features】
- Suppresses overrun and maintains torque.
- Friction brake allows immediate increase in reversal when load is applied.
- Meets high-speed operation needs for small conveyors or stopper mechanisms.

Part Number

Configured Part Number is shown.

EA-RM2006-A-A

Drawing/Specifications
Part Numbers

Product Overview

Motor Type	Type	Applications	Features	Notes	Output Range	Motor		Controller
Motor Type	Type	Applications	Features	Notes	Output Range	Parallel	Right Angle	Controller
Induction Motor	EA-IMA EA-IMB	【Constant-speed continuous operation】 (24-hour use such as fans, pumps, mixers, conveyors with minimal load fluctuation)	Simple and robust structure. Three-phase types provide high efficiency and good starting characteristics single-phase types offer easy wiring.	Not suitable for large acceleration/deceleration or frequent forward/reverse cycles.	6～200W	LINK	LINK	-
Reversible Motor	EA-RM	【Frequent forward/reverse operation】 positioning, reciprocating motion, pushing applications	Excellent reversing response, minimizing overrun	Generates a lot of heat, so it has a short-time rating (ex. 30 minutes)	6～120W	LINK	LINK	-
Brake Motor	EA-BM	【Holding / maintaining stop】 lifting, vertical transport, safety stop	Stops and holds immediately when power is turned off, and maintains position even during power failure	Limitations apply regarding stop frequency and temperature environment	6～200W	LINK	LINK	-
Speed Control Motor	EA-AM	【Speed control】 flow control, tension control, synchronous feeding, frequent setup changes	Controller-integrated design for easy wiring with a wide adjustable speed range	Risk of overheating during ultra-low-speed continuous operation	6～200W	LINK	LINK	LINK
Reversible Speed Control Motor	EA-ARM	【Speed control + reverse】 positioning, reciprocating motion, pushing applications requiring adjustable speed	Combines speed control and reversing capability in a single unit.	Duty cycle and thermal limits must be considered in continuous use.	25～120W	*	*	LINK
Brake Speed Control Motor	EA-ABM	【Speed control +Brake】 vertical transport, lifting requiring speed adjustment and position holding	Allows speed adjustment while maintaining safe and stable stopping performance.	Not suitable for continuous operation under heavy braking conditions.	25～200W	*	*	LINK
Torque Motor	EA-TM	【Tension Control】 Winding, feeding, and pressing applications that require maintaining constant tension or pressure.	Maintains high torque even at low or near-stopped speeds	Generates significant heat → ensure operation within continuous torque rating and provide cooling	3~20W	LINK	-	-

*: Scheduled to be released after web production in March 26th

Outline Drawing

Link Pages which have outerline dimension, wiring,technical data are available. Please refer to the page top " Product Description ".

◇Motor & Gearhead Set

◇ Terminal Box / Fan-Attached Type

◇ Fan-Attached Type

Specification Table

～ Please select the model and parameters according to the options below before placing your order.

Part Number
Type・Flange Size

－

Shaft End
Shape

－

Input Voltage /
Number of Poles

－

Additional Option
Fan / Terminal Box Type

－

Additional Option
Gearhead Selection

－

Additional Option
Gear Ratio

EA-RM

5040

EA-RM

5120

F-T

■ Motor Body

❶	❷			❸	❹
Type	No	Flange Size	Output Power [W]	Shaft End Shape	Input V Code	Fan	Terminal Box


Reversible Motor EA-RM	2006	□60	6	GN：GN Gear A：Round	〈4-pole〉 A: Single 110V、50/60Hz、4-pole E: Single 110/120V、60Hz、4-pole C: Single 220/230V、50Hz、4-pole H: Single 220/230V、60Hz、4-pole	none	Not applicable
	3015	□70	15			none	Not applicable
	4025	□80	25			none	T：Terminal box ※Available for 25W and above ※If not selected, lead wires will be provided.
	5040	□90	40			none
	5060		60	GN、GU、A		F：With fan
	5090		90	GU：GU Gear A：Round		F：With fan
	5120		120	GU：GU Gear A：Round		F：With fan

The rated torque and starting torque values of reversible motors are based on models without a built-in friction brake.

All safety certifications are obtained based on the model number indicated on the motor nameplate.

This product is equipped with an internal thermal protector (self-reset type).
When the motor overheats, the protector operates automatically and stops the motor to prevent damage.

Once the motor temperature has sufficiently decreased, it will automatically reset and restart.
For inspection or servicing, always ensure the power is turned off beforehand.

For “-A” models with a 110V specification, please refer to the actual motor nameplate for the correct capacitor rating.

■ Gearhead (Available as an additional machining option)
※ Additional machining can be specified only when selecting shaft types GN or GU.


Alterations Code	No	Flange Size	Gear Ratio
Alterations Code	No	Flange Size	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
GH	2	□60	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
	3	□70	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
	4	□80	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
	5	□90	3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200

※Gearhead standalone model code = EA- & {Additional Machining Code} & {Flange No.} & {Gear Ratio}

Specification Overview

❶ ❷			❸	❹
Type No	Flange Size	Output Power [W]	Shaft End Shape	Input V Code	Voltage	Frequency	Current	Starting Torque	Rated Torque	Rated Speed	Capacitor
					Voltage	Frequency	Current	Starting Torque	Rated Torque	Rated Speed	Capacitor
					[V]	[Hz]	[A]	[mN・m]	[mN・m]	[r/min]	[μF]
EA-RM2006	□60	6	〈Pinion〉 -GN 〈Round〉 -A	-A	1ph 100	50	0.265	60	48	1,200	4.0
				-A	1ph 100	60	0.232	55	40	1,450	4.0
				-E	1ph 110	60	0.185	45	40	1,450	2.5
				-E	1ph 120	60	0.200	45	40	1,450	2.5
				-C	1ph 220	50	0.145	55	48	1,200	1.0
				-C	1ph 230	50	0.150	55	48	1,200	1.0
				-H	1ph 220	60	0.145	40	60	1,450	1.0
				-H	1ph 230	60	0.150	40	60	1,450	1.0
EA-RM3015	□70	15	〈Pinion〉 -GN 〈Round〉 -A	-A	1ph 100	50	0.40	110	125	1,200	7.0
				-A	1ph 100	60	0.56	105	105	1,450	7.0
				-E	1ph 110	60	0.43	85	105	1,450	6.0
				-E	1ph 120	60	0.42	85	105	1,450	6.0
				-C	1ph 220	50	0.23	110	125	1,200	1.5
				-C	1ph 230	50	0.23	110	125	1,200	1.5
				-H	1ph 220	60	0.20	85	105	1,450	1.5
				-H	1ph 230	60	0.20	90	105	1,450	1.5
EA-RM4025	□80	25	〈Pinion〉 -GN 〈Round〉 -A	-A	1ph 100	50	0.59	160	200	1,250	10.0
				-A	1ph 100	60	0.69	140	165	1,550	10.0
				-E	1ph 110	60	0.45	140	165	1,550	8.0
				-E	1ph 120	60	0.50	140	165	1,550	8.0
				-C	1ph 220	50	0.29	140	200	1,250	2.2
				-C	1ph 230	50	0.30	160	200	1,250	2.2
				-H	1ph 220	60	0.35	140	165	1,550	2.2
				-H	1ph 230	60	0.35	140	165	1,550	2.2
EA-RM5040	□90	40	〈Pinion〉 -GN 〈Round〉 -A	-A	1ph 100	50	0.78	300	315	1,250	15.0
				-A	1ph 100	60	1.05	300	260	1,550	15.0
				-E	1ph 110	60	0.79	260	260	1,550	12.0
				-E	1ph 120	60	0.80	260	260	1,550	12.0
				-C	1ph 220	50	0.45	270	315	1,250	3.0
				-C	1ph 230	50	0.45	270	315	1,250	3.0
				-H	1ph 220	60	0.45	270	260	1,550	3.0
				-H	1ph 230	60	0.45	270	260	1,550	3.0
EA-RM5060	□90	60	〈Pinion〉 -GN -GU 〈Round〉 -A	-A	1ph 100	50	1.26	470	470	1,250	25.0
				-A	1ph 100	60	1.70	470	380	1,550	25.0
				-E	1ph 110	60	1.05	330	380	1,550	15.0
				-E	1ph 120	60	1.05	380	380	1,550	15.0
				-C	1ph 220	50	0.55	420	470	1,250	4.5
				-C	1ph 230	50	0.60	460	470	1,250	4.5
				-H	1ph 220	60	0.55	420	380	1,550	4.5
				-H	1ph 230	60	0.60	460	380	1,550	4.5
EA-RM5090	□90	90	〈Pinion〉 -GU 〈Round〉 -A	-A	1ph 100	50	1.78	600	700	1,250	30.0
				-A	1ph 100	60	2.35	600	570	1,550	30.0
				-E	1ph 110	60	1.72	550	570	1,550	25.0
				-E	1ph 120	60	1.72	600	570	1,550	25.0
				-C	1ph 220	50	0.82	560	700	1,250	6.0
				-C	1ph 230	50	0.81	560	700	1,250	6.0
				-H	1ph 220	60	0.81	560	560	1,550	6.0
				-H	1ph 230	60	0.80	560	560	1,550	6.0
EA-RM5120	□90	120	〈Pinion〉 -GU 〈Round〉 -A	-A	1ph 100	50	2.25	700	930	1,250	35.0
				-A	1ph 100	60	2.85	700	750	1,550	35.0
				-E	1ph 110	60	1.90	650	750	1,550	30.0
				-E	1ph 120	60	1.90	720	750	1,550	30.0
				-C	1ph 220	50	1.00	650	930	1,250	7.0
				-C	1ph 230	50	0.95	650	930	1,250	7.0
				-H	1ph 220	60	1.00	600	750	1,550	7.0
				-H	1ph 230	60	0.95	600	750	1,550	7.0

○ Allowable Torque When a Gearhead Is Mounted

Please purchase gearheads and mid-gearheads either by specifying additional machining for the motor or from the standalone product page (AC Motor Gearhead EA Series).
When the additional machining code GH is specified, the gear ratio is entered in the box (□) within the model number.
Combinations shown in the yellow cells ( )indicate that the output rotation direction is opposite to that of the motor. All other combinations have the same rotation direction.
The rotational speed is a reference value calculated by dividing the motor’s synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio.
The actual rotational speed decreases by approximately 2–20% from the listed value depending on the load.
If a greater gear ratio than those listed in the table is required, please add a mid-gearhead with a gear ratio of 10 between the motor and the gearhead.
In this case, the allowable torque is 20 N·m.

Type (Motor/Gearhead)	Allowance Torque Unit
	Gear Ratio		3	3.6	5	6	7.5	9	10	12.5	15	18	20	25	30	36	40	50	60	75	90	100	120	150	180	200
	50Hz	Speed r/min	500	417	300	250	200	166	150	120	100	83	75	60	50	41	37	30	25	20	16	15	12.5	10	8.3	7.5
	60Hz	Speed r/min	600	500	360	300	240	200	180	144	120	100	90	72	60	50	45	36	30	24	20	18	15	12	10	9
EA-RM2006 -GN	50Hz	N・m	0.12	0.14	0.19	0.23	0.29	0.35	0.39	0.49	0.58	0.70	0.75	0.88	1.10	1.30	1.39	1.60	1.90	2.40	2.90	3.00	3.00	3.00	3.00	3.00
	50Hz	kgf・cm	1.22	1.43	1.94	2.35	2.96	3.57	3.98	5.00	5.92	7.14	7.65	8.98	11.2	13.3	14.2	16.3	19.4	24.5	29.6	30.0	30.0	30.0	30.0	30.0
	60Hz	N・m	0.10	0.12	0.16	0.19	0.24	0.29	0.32	0.41	0.49	0.58	0.62	0.73	0.88	1.10	1.15	1.30	1.60	2.00	2.40	2.60	3.00	3.00	3.00	3.00
	60Hz	kgf・cm	1.02	1.22	1.63	1.94	2.45	2.96	3.26	4.18	5.00	5.92	6.32	7.45	8.98	11.2	11.7	13.3	16.3	20.4	24.5	2.65	30.0	30.0	30.0	30.0
EA-RM3015 -GN	50Hz	N・m	0.30	0.36	0.51	0.61	0.76	0.91	0.97	1.30	1.50	1.80	1.94	2.30	2.70	3.30	3.48	4.10	5.00	5.00	5.00	5.00	5.00	5.00	5.00	5.00
	50Hz	kgf・cm	3.06	3.67	5.20	6.22	7.75	9.28	9.90	13.2	15.3	18.3	19.8	23.4	27.5	33.7	35.5	41.8	50.0	50.0	50.0	50.0	50.0	50.0	50.0	50.0
	60Hz	N・m	0.26	0.31	0.43	0.51	0.64	0.77	0.80	1.10	1.30	1.50	1.64	1.90	2.30	2.80	2.88	3.50	4.20	5.00	5.00	5.00	5.00	5.00	5.00	5.00
	60Hz	kgf・cm	2.65	3.16	4.38	5.20	6.53	7.85	8.16	11.2	13.2	15.3	16.7	19.3	23.4	28.5	29.4	35.7	42.8	50.0	50.0	50.0	50.0	50.0	50.0	50.0
EA-RM4025 -GN	50Hz	N・m	0.49	0.58	0.81	0.97	1.20	1.50	1.55	2.00	2.40	2.90	3.17	3.70	4.40	5.30	5.57	6.60	7.90	8.00	8.00	8.00	8.00	8.00	8.00	8.00
	50Hz	kgf・cm	5.00	5.91	8.26	9.89	12.2	15.3	15.8	20.4	24.4	29.6	32.3	37.7	44.9	54.1	56.8	67.3	80.0	80.0	80.0	80.0	80.0	80.0	80.0	80.0
	60Hz	N・m	0.40	0.48	0.67	0.80	1.00	1.20	1.25	1.70	2.00	2.40	2.64	3.00	3.60	4.30	4.49	5.40	6.50	8.00	8.00	8.00	8.00	8.00	8.00	8.00
	60Hz	kgf・cm	4.08	4.89	6.83	8.16	10.2	12.2	12.8	17.3	20.4	24.4	26.9	30.6	36.7	43.8	45.8	55.1	66.3	80.0	80.0	80.0	80.0	80.0	80.0	80.0
EA-RM5040 -GN	50Hz	N・m	0.77	0.92	1.30	1.50	1.90	2.30	2.38	3.20	3.80	4.60	4.88	5.70	6.90	8.30	8.57	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0
	50Hz	kgf・cm	7.85	9.38	13.2	15.3	19.4	23.4	24.3	32.6	38.7	46.9	49.8	58.1	70.4	84.7	87.4	100	100	100	100	100	100	100	100	100
	60Hz	N・m	0.63	0.76	1.10	1.30	1.60	1.90	2.00	2.60	3.20	3.80	4.07	4.70	5.70	6.80	7.19	8.60	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0
	60Hz	kgf・cm	6.42	7.75	11.2	13.2	16.3	19.3	20.4	26.5	32.6	38.7	41.5	47.9	58.1	69.3	73.4	87.7	100	100	100	100	100	100	100	100
EA-RM5060 -GN	50Hz	N・m	1.10	1.40	1.90	2.30	2.90	3.40	3.57	4.80	5.70	6.80	7.03	8.60	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0
	50Hz	kgf・cm	11.2	14.2	19.3	23.4	29.6	34.7	36.4	48.9	58.1	69.3	71.7	87.7	100	100	100	100	100	100	100	100	100	100	100	100
	60Hz	N・m	0.92	1.10	1.50	1.80	2.30	2.80	2.99	3.80	4.60	5.50	5.70	6.90	8.30	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0	10.0
	60Hz	kgf・cm	9.38	11.2	15.3	18.3	23.4	28.5	30.5	38.7	46.9	56.1	58.2	70.1	84.7	100	100	100	100	100	100	100	100	100	100	100
EA-RM5060 -GU	50Hz	N・m	1.10	1.40	1.90	2.30	2.90	3.40	3.61	4.80	5.70	6.80	7.12	8.60	10.0	10.3	11.6	12.4	15.5	18.6	20.0	20.0	20.0	20.0	20.0	20.0
	50Hz	kgf・cm	11.2	14.2	19.3	23.4	29.6	34.7	36.8	48.9	58.1	69.3	72.6	87.7	100	105	118	126	158	189	200	200	200	200	200	200
	60Hz	N・m	0.92	1.10	1.50	1.80	2.30	2.80	3.01	3.80	4.60	5.50	5.73	6.90	8.30	8.30	9.70	10.0	12.5	15.0	18.8	20.0	20.0	20.0	20.0	20.0
	60Hz	kgf・cm	9.38	11.2	15.3	18.3	23.4	28.5	30.7	38.7	46.9	56.1	58.4	70.1	84.7	84.6	98.9	102	127	153	192	200	200	200	200	200
EA-RM5090 -GU	50Hz	N・m	1.10	2.00	2.80	3.40	4.30	5.10	5.31	6.40	7.70	9.20	9.55	11.6	13.6	16.6	18.1	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
	50Hz	kgf・cm	17.3	20.4	28.6	34.7	43.9	52.0	54.2	65.3	78.6	93.3	97.4	118	139	169	184	200	200	200	200	200	200	200	200	200
	60Hz	N・m	1.40	1.70	2.50	2.80	3.50	4.20	4.43	5.20	6.20	7.50	7.81	9.40	11.3	13.5	14.5	18.8	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
	60Hz	kgf・cm	14.3	17.3	25.5	28.6	35.7	42.9	45.2	53.1	63.3	76.5	79.6	95.9	115	138	148	192	200	200	200	200	200	200	200	200
EA-RM5120 -GU	50Hz	N・m	2.30	2.70	3.80	4.50	5.60	6.80	7.01	8.50	10.2	12.2	12.5	15.3	18.4	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
	50Hz	kgf・cm	23.4	27.5	38.7	45.9	57.1	69.3	71.5	86.7	104	124	128	156	187	200	200	200	200	200	200	200	200	200	200	200
	60Hz	N・m	1.80	2.20	3.00	3.60	4.60	5.50	5.73	6.80	8.20	9.80	10.1	12.4	14.9	17.8	19.5	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0
	60Hz	kgf・cm	18.3	22.4	30.6	36.7	46.9	56.1	58.5	69.5	83.6	100	103	126	152	181	199	200	200	200	200	200	200	200	200	200

Alterations

Alterations	Gearhead Set Purchase	Mid-Gear Set Purchase
Code	GH	GH10X
Spec.	You can purchase a gearhead set that matches the motor size and gear type. Please check the gearhead specification table to confirm the available gear ratios based on the motor flange number. [ ! ] Available gear ratios: for flange □42 → 1/3 to 1/60, others → 1/3 to 1/200. [Designation method] Gear ratio 1/30 → GH30	You can purchase a mid-gear set that matches the motor size. When combined with a gearhead, a greater gear ratio can be achieved. [ ! ] Only a gear ratio of 1/10 is available. [Designation method] GN10X






1 Code (Price per Code)	Check on Web	Check on Web

Product Features

1. Basic Structure and Operating Concept
A reversible motor is equipped with a friction brake on the rear side of the motor body and is designed for applications requiring frequent forward/reverse switching.
A spring-loaded damper constantly applies pressure to the rotating brake disc, maintaining a consistent level of friction at all times.

The primary functions of the friction brake are as follows:
① Improving instantaneous forward/reverse performance through frictional load
② Reducing overrun
③ Maintaining a constant holding torque
　(approximately 10% of the rated torque)

2. Holding Torque and Overrun Values of the Friction Brake
①Please refer to the specification table for holding torque and overrun values.
②These values may vary depending on operating conditions such as duration of rotation and ambient temperature.
③During initial operation, the actual torque may be slightly lower than the listed values, so caution is required.

3. Motor Characteristics
Reversible motors use a capacitor-start system similar to induction motors and exhibit nearly identical torque characteristics.
However, to enhance instantaneous forward/reverse switching performance, the starting torque is designed to be higher than that of standard induction motors.

: 30; 45; 60

Part Number
EA-RM2006-A-A

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Square Flange Dim. A (mm)	Rated Output (W)	Voltage (V)	Shaft End Shape	Fan	T-BOX (Terminal Box)	Frequency (Hz)
	MYR 165.49	1 Piece(s)	Available	13 Day(s)	10	60	6	100	Round Shaft	None	None	50/60

Basic Information

Type	Motor Only	Motor Type	Reversible	Power Supply	1-phase
Gear Head Type	Not Provided	Electromagnetic Brakes, Clutches	Not Provided	Environment	Standard
Type	Reversible Motor	Number of Poles	4 Poles

Please check the type/dimensions/specifications of the part EA-RM2006-A-A in the Small AC Reversible Motors 6-120W series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

type
- EA-RM
Clear
Square Flange Dim. A(mm)
60

70

80

90
Clear
Rated Output(W)
6

15

25

40

60

90

120
Clear
Voltage(V)
100

110/120

220/230
Clear
Shaft End Shape
- GN Type Spline Shaft
- GU Type Spline Shaft
- Round Shaft
Clear
Fan
- Available
- None
Clear
T-BOX (Terminal Box)
- Available
- None
Clear
Frequency(Hz)
- 50
- 50/60
- 60
Clear
CAD
- 3D
Clear

Days to Ship

All

13 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
EA-RM2006-A-C
EA-RM2006-A-E
EA-RM2006-A-H
EA-RM3015-A-A
EA-RM3015-A-C
EA-RM3015-A-E

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Square Flange Dim. A (mm)	Rated Output (W)	Voltage (V)	Shaft End Shape	Fan	T-BOX (Terminal Box)	Frequency (Hz)
MYR 165.49	1 Piece(s)	Available	13 Day(s)	10	60	6	220/230	Round Shaft	None	None	50
MYR 165.49	1 Piece(s)	Available	13 Day(s)	10	60	6	110/120	Round Shaft	None	None	60
MYR 165.49	1 Piece(s)	Available	13 Day(s)	10	60	6	220/230	Round Shaft	None	None	60
MYR 209.81	1 Piece(s)	Available	13 Day(s)	10	70	15	100	Round Shaft	None	None	50/60
MYR 209.81	1 Piece(s)	Available	13 Day(s)	10	70	15	220/230	Round Shaft	None	None	50
MYR 209.81	1 Piece(s)	Available	13 Day(s)	10	70	15	110/120	Round Shaft	None	None	60

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

Small AC Reversible Motors 6-120W (EA-RM2006-A-A)

Basic Information

Configure

Specification/Dimensions

type

Square Flange Dim. A(mm)

Rated Output(W)

Voltage(V)

Shaft End Shape

Fan

T-BOX (Terminal Box)

Frequency(Hz)

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm