(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Oldham Couplings - Large Shaft Diameter, Set Screw / Clamping / Spacers, Economy series
MiSUMi Economy
Only part numbers that can be generated via the filter(Configurator bar on the left) are currently available.
Part Number
Configured Part Number is shown.
- Download
Product Details - CAD Data unavailable
Part numbers generated using the configuration bar on the left side of the page are valid.
Drawing
Operating Temperature: -20°C ~ 80°C ETolerances for d1 and d2 are values before slit machining.The lateral, angular, and axial misalignment values shown are for each occurring individually.When multiple misalignments are occurring simultaneously, the allowable maximum value of each will be reduced to 1/2.Material
| Shape | Keywayed Bore |  Material |  Accesories | |||
| d1(One Side) | d2(One Side) | d1・d2(Both Side) | Hub | Spacers | ||
| Set Screw | - | - | EA-MFJWK | Aluminum Alloy | Polyacetal | Set Screw |
| Clamping | EA-MFJCLK | EA-MFJCRK | EA-MFJCWK | Hex Socket Head Cap Screw | ||
Specification
| Part Number | - | Shaft Bore Dia. d1 | - | Shaft Bore Dia. d2 | ||
| - | 16 | - | 20 | ||
| EA-MFJCWK70 | - | 22 | - | 35 |
| Part Number | d1,d2 Selection (However d1≤d2) | d3 | L | ℓ | F | A | Set Screw/ Clamping Screw | |||||||||||||
| Type | D | M | Tightening Torque (N・m) | |||||||||||||||||
| Set Screw EA-MFJWK | 44 | 14 | 15 | 16 | 18 | 20 | 22 | 22.5 | 46 | 15 | 7.5 | - | M 6 | 7.0 | ||||||
| 55 | 18 | 20 | 22 | 25 | 26 | 28 | 57 | 19 | 9.5 | - | M 8 | 15.0 | ||||||||
| 70 | 22 | 25 | 28 | 30 | 35 | 38 | 39 | 77 | 25 | 12.5 | - | M10 | 30.0 | |||||||
| Clamping EA-MFJC EA-MFJCLK EA-MFJCRK EA-MFJCWK | 44 | 14 | 15 | 16 | 18 | 20 | 22.5 | 46 | 15 | 7.5 | 14.5 | M5 | ＊8.4 | |||||||
| 55 | 18 | 20 | 22 | 25 | 28 | 57 | 19 | 9.5 | 17 | M6 | ＊14.4 | |||||||||
| 70 | 22 | 25 | 28 | 30 | 35 | 39 | 77 | 25 | 12.5 | 24 | M8 | ＊30.0 | ||||||||
*When the shaft diameter is small, clamp screw tightening torque should be higher than the prescribed value to prevent shaft slipping. The above tightening torque is for referenceOnly part numbers that can be generated via the filter(Configurator bar on the left) are currently available.| Part Number | Allowable Torque (N・m) | Angular Misalignment (°) | Lateral Misalignment (mm) | Static Torsional Spring Constant (N・m/rad) | Max. Rotational Speed (r/min) | Moment of Inertia (kg・m2) | Allowable Axial Misaligntment (mm) | Mass (g) | ||
| Type | D | Set Screw | Clamping | |||||||
| Clamping EA-MFJC EA-MFJCLK EA-MFJCRK EA-MFJCWK | 44 | 30 | 26 | 2 | 1 | 1500 | 12000 | 4 ×10-5 | ±0.5 | 140 |
| 55 | 45 | 40 | 1.5 | 2800 | 10000 | 11 ×10-5 | ±0.6 | 260 | ||
| 70 | 80 | 72 | 2 | 4800 | 8000 | 40 ×10-5 | ±0.8 | 450 | ||
The allowable torque varies depending on temperature.Alterations
| Alterations | Shaft Bore Dia. | Keyway Width | Keyway | |||||||||||||||||||||||||||
| Spec. |  0.1mm increment Ordering Code LDC19.5 RDC21
Values in（）are for Clamping Type. | Keyway Width(b) is changed as the table below. Ordering Code KLH8 KRH8 
 Cannot be combined with shaft bore change（LDC·RDC）alteration.Applicable to Keywayed Bore only. | ||||||||||||||||||||||||||||
| Code | LDC（Left Shaft） | RDC（Right Shaft） | KLH（Left Shaft） | KRH（Right Shaft） | LK（Left Shaft） | RK（Right Shaft） | ||||||||||||||||||||||||
| Part Number |
|---|
| EA-MFJCLK44-[14,15,16,18,20]-[14,15,16,18,20] |
| EA-MFJCLK44-[14,15,16,18,20]-RDC[14-20/0.1] |
| EA-MFJCLK44-LDC[14-20/0.1]-[14,15,16,18,20] |
| EA-MFJCLK44-LDC[14-20/0.1]-RDC[14-20/0.1] |
| EA-MFJCLK55-[18,20,22,25]-[18,20,22,25] |
| EA-MFJCLK55-[18,20,22,25]-RDC[18-25/0.1] |
| EA-MFJCLK55-LDC[18-25/0.1]-[18,20,22,25] |
| EA-MFJCLK55-LDC[18-25/0.1]-RDC[18-25/0.1] |
| EA-MFJCLK70-[22,25,28,30,35]-[22,25,28,30,35] |
| EA-MFJCLK70-[22,25,28,30,35]-RDC[22-35/0.1] |
| EA-MFJCLK70-LDC[22-35/0.1]-[22,25,28,30,35] |
| EA-MFJCLK70-LDC[22-35/0.1]-RDC[22-35/0.1] |
| EA-MFJCRK44-[14,15,16,18,20]-[14,15,16,18,20] |
| EA-MFJCRK44-[14,15,16,18,20]-RDC[14-20/0.1] |
| EA-MFJCRK44-LDC[14-20/0.1]-[14,15,16,18,20] |
| EA-MFJCRK44-LDC[14-20/0.1]-RDC[14-20/0.1] |
| EA-MFJCRK55-[18,20,22,25]-[18,20,22,25] |
| EA-MFJCRK55-[18,20,22,25]-RDC[18-25/0.1] |
| EA-MFJCRK55-LDC[18-25/0.1]-[18,20,22,25] |
| EA-MFJCRK55-LDC[18-25/0.1]-RDC[18-25/0.1] |
| EA-MFJCRK70-[22,25,28,30,35]-[22,25,28,30,35] |
| EA-MFJCRK70-[22,25,28,30,35]-RDC[22-35/0.1] |
| EA-MFJCRK70-LDC[22-35/0.1]-[22,25,28,30,35] |
| EA-MFJCRK70-LDC[22-35/0.1]-RDC[22-35/0.1] |
| EA-MFJCWK44-[14,15,16,18,20]-[14,15,16,18,20] |
| EA-MFJCWK44-[14,15,16,18,20]-RDC[14-20/0.1] |
| EA-MFJCWK44-LDC[14-20/0.1]-[14,15,16,18,20] |
| EA-MFJCWK44-LDC[14-20/0.1]-RDC[14-20/0.1] |
| EA-MFJCWK55-[18,20,22,25]-[18,20,22,25] |
| EA-MFJCWK55-[18,20,22,25]-RDC[18-25/0.1] |
| EA-MFJCWK55-LDC[18-25/0.1]-[18,20,22,25] |
| EA-MFJCWK55-LDC[18-25/0.1]-RDC[18-25/0.1] |
| EA-MFJCWK70-[22,25,28,30,35]-[22,25,28,30,35] |
| EA-MFJCWK70-[22,25,28,30,35]-RDC[22-35/0.1] |
| EA-MFJCWK70-LDC[22-35/0.1]-[22,25,28,30,35] |
| EA-MFJCWK70-LDC[22-35/0.1]-RDC[22-35/0.1] |
| EA-MFJWK44-[14,15,16,18,20,22]-[14,15,16,18,20,22] |
| EA-MFJWK44-[14,15,16,18,20,22]-RDC[14-22/0.1] |
| EA-MFJWK44-LDC[14-22/0.1]-[14,15,16,18,20,22] |
| EA-MFJWK44-LDC[14-22/0.1]-RDC[14-22/0.1] |
| EA-MFJWK55-[18,20,22,25,26]-[18,20,22,25,26] |
| EA-MFJWK55-[18,20,22,25,26]-RDC[18-26/0.1] |
| EA-MFJWK55-LDC[18-26/0.1]-[18,20,22,25,26] |
| EA-MFJWK55-LDC[18-26/0.1]-RDC[18-26/0.1] |
| EA-MFJWK70-[22,25,28,30,35,38]-[22,25,28,30,35,38] |
| EA-MFJWK70-[22,25,28,30,35,38]-RDC[22-38/0.1] |
| EA-MFJWK70-LDC[22-38/0.1]-[22,25,28,30,35,38] |
| EA-MFJWK70-LDC[22-38/0.1]-RDC[22-38/0.1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Shaft Bore Dia. 1 d1 (or d) (Ø) | Shaft Bore Dia. 2 d2 (or d) (Ø) | O.D. (Ø) | Overall Length (mm) | Allowable Torque Range (N•m) | Max. Rotational Speed Range (r/min) | Allowable Torque (N•m) | Allowable Lateral Misalignment (mm) | Allowable Lateral Misalignment Range (mm) | Max. Rotational Speed (r/min) | Allowable Axial Misalignment (mm) | Moment of Inertia (kg・m2) | Shaft I.D. d2 Change Hole Dia. [RDC] Specified in 0.1mm Increment | Shaft I.D. d1 Change Hole Dia. [LDC] Specified in 0.1mm Increment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 17 Day(s) | 14 ～ 20 | 14 ～ 20 | 44 | 46 | 20.01~50.00 | 10001~78000 | 26 | 1 | 0.41~1.0 | 12000 | +0.5/-0.5 | 4×10-5 | - | - | ||
- | 1 Piece(s) | 17 Day(s) | 14 ～ 20 | - | 44 | 46 | 20.01~50.00 | 10001~78000 | 26 | 1 | 0.41~1.0 | 12000 | +0.5/-0.5 | 4×10-5 | 14 ～ 20 | - | ||
- | 1 Piece(s) | 17 Day(s) | - | 14 ～ 20 | 44 | 46 | 20.01~50.00 | 10001~78000 | 26 | 1 | 0.41~1.0 | 12000 | +0.5/-0.5 | 4×10-5 | - | 14 ～ 20 | ||
- | 1 Piece(s) | 17 Day(s) | - | - | 44 | 46 | 20.01~50.00 | 10001~78000 | 26 | 1 | 0.41~1.0 | 12000 | +0.5/-0.5 | 4×10-5 | 14 ～ 20 | 14 ～ 20 | ||
- | 1 Piece(s) | 17 Day(s) | 18 ～ 25 | 18 ～ 25 | 55 | 57 | 20.01~50.00 | 4001~10000 | 40 | 1.5 | 1.1~3.0 | 10000 | +0.6/-0.6 | 11x10-5 | - | - | ||
- | 1 Piece(s) | 17 Day(s) | 18 ～ 25 | - | 55 | 57 | 20.01~50.00 | 4001~10000 | 40 | 1.5 | 1.1~3.0 | 10000 | +0.6/-0.6 | 11x10-5 | 18 ～ 25 | - | ||
- | 1 Piece(s) | 17 Day(s) | - | 18 ～ 25 | 55 | 57 | 20.01~50.00 | 4001~10000 | 40 | 1.5 | 1.1~3.0 | 10000 | +0.6/-0.6 | 11x10-5 | - | 18 ～ 25 | ||
- | 1 Piece(s) | 17 Day(s) | - | - | 55 | 57 | 20.01~50.00 | 4001~10000 | 40 | 1.5 | 1.1~3.0 | 10000 | +0.6/-0.6 | 11x10-5 | 18 ～ 25 | 18 ～ 25 | ||
- | 1 Piece(s) | 17 Day(s) | 22 ～ 35 | 22 ～ 35 | 70 | 77 | 50.01~100.00 | 4001~10000 | 72 | 2 | 1.1~3.0 | 8000 | +0.8/-0.8 | 40x10-5 | - | - | ||
- | 1 Piece(s) | 17 Day(s) | 22 ～ 35 | - | 70 | 77 | 50.01~100.00 | 4001~10000 | 72 | 2 | 1.1~3.0 | 8000 | +0.8/-0.8 | 40x10-5 | 22 ～ 35 | - | ||
- | 1 Piece(s) | 17 Day(s) | - | 22 ～ 35 | 70 | 77 | 50.01~100.00 | 4001~10000 | 72 | 2 | 1.1~3.0 | 8000 | +0.8/-0.8 | 40x10-5 | - | 22 ～ 35 | ||
- | 1 Piece(s) | 17 Day(s) | - | - | 70 | 77 | 50.01~100.00 | 4001~10000 | 72 | 2 | 1.1~3.0 | 8000 | +0.8/-0.8 | 40x10-5 | 22 ～ 35 | 22 ～ 35 | ||
- | 1 Piece(s) | 17 Day(s) | 14 ～ 20 | 14 ～ 20 | 44 | 46 | 20.01~50.00 | 10001~78000 | 26 | 1 | 0.41~1.0 | 12000 | +0.5/-0.5 | 4×10-5 | - | - | ||
- | 1 Piece(s) | 17 Day(s) | 14 ～ 20 | - | 44 | 46 | 20.01~50.00 | 10001~78000 | 26 | 1 | 0.41~1.0 | 12000 | +0.5/-0.5 | 4×10-5 | 14 ～ 20 | - | ||
- | 1 Piece(s) | 17 Day(s) | - | 14 ～ 20 | 44 | 46 | 20.01~50.00 | 10001~78000 | 26 | 1 | 0.41~1.0 | 12000 | +0.5/-0.5 | 4×10-5 | - | 14 ～ 20 | ||
- | 1 Piece(s) | 17 Day(s) | - | - | 44 | 46 | 20.01~50.00 | 10001~78000 | 26 | 1 | 0.41~1.0 | 12000 | +0.5/-0.5 | 4×10-5 | 14 ～ 20 | 14 ～ 20 | ||
- | 1 Piece(s) | 17 Day(s) | 18 ～ 25 | 18 ～ 25 | 55 | 57 | 20.01~50.00 | 4001~10000 | 40 | 1.5 | 1.1~3.0 | 10000 | +0.6/-0.6 | 11x10-5 | - | - | ||
- | 1 Piece(s) | 17 Day(s) | 18 ～ 25 | - | 55 | 57 | 20.01~50.00 | 4001~10000 | 40 | 1.5 | 1.1~3.0 | 10000 | +0.6/-0.6 | 11x10-5 | 18 ～ 25 | - | ||
- | 1 Piece(s) | 17 Day(s) | - | 18 ～ 25 | 55 | 57 | 20.01~50.00 | 4001~10000 | 40 | 1.5 | 1.1~3.0 | 10000 | +0.6/-0.6 | 11x10-5 | - | 18 ～ 25 | ||
- | 1 Piece(s) | 17 Day(s) | - | - | 55 | 57 | 20.01~50.00 | 4001~10000 | 40 | 1.5 | 1.1~3.0 | 10000 | +0.6/-0.6 | 11x10-5 | 18 ～ 25 | 18 ～ 25 | ||
- | 1 Piece(s) | 17 Day(s) | 22 ～ 35 | 22 ～ 35 | 70 | 77 | 50.01~100.00 | 4001~10000 | 72 | 2 | 1.1~3.0 | 8000 | +0.8/-0.8 | 40x10-5 | - | - | ||
- | 1 Piece(s) | 17 Day(s) | 22 ～ 35 | - | 70 | 77 | 50.01~100.00 | 4001~10000 | 72 | 2 | 1.1~3.0 | 8000 | +0.8/-0.8 | 40x10-5 | 22 ～ 35 | - | ||
- | 1 Piece(s) | 17 Day(s) | - | 22 ～ 35 | 70 | 77 | 50.01~100.00 | 4001~10000 | 72 | 2 | 1.1~3.0 | 8000 | +0.8/-0.8 | 40x10-5 | - | 22 ～ 35 | ||
- | 1 Piece(s) | 17 Day(s) | - | - | 70 | 77 | 50.01~100.00 | 4001~10000 | 72 | 2 | 1.1~3.0 | 8000 | +0.8/-0.8 | 40x10-5 | 22 ～ 35 | 22 ～ 35 | ||
- | 1 Piece(s) | 17 Day(s) | 14 ～ 20 | 14 ～ 20 | 44 | 46 | 20.01~50.00 | 10001~78000 | 26 | 1 | 0.41~1.0 | 12000 | +0.5/-0.5 | 4×10-5 | - | - | ||
- | 1 Piece(s) | 17 Day(s) | 14 ～ 20 | - | 44 | 46 | 20.01~50.00 | 10001~78000 | 26 | 1 | 0.41~1.0 | 12000 | +0.5/-0.5 | 4×10-5 | 14 ～ 20 | - | ||
- | 1 Piece(s) | 17 Day(s) | - | 14 ～ 20 | 44 | 46 | 20.01~50.00 | 10001~78000 | 26 | 1 | 0.41~1.0 | 12000 | +0.5/-0.5 | 4×10-5 | - | 14 ～ 20 | ||
- | 1 Piece(s) | 17 Day(s) | - | - | 44 | 46 | 20.01~50.00 | 10001~78000 | 26 | 1 | 0.41~1.0 | 12000 | +0.5/-0.5 | 4×10-5 | 14 ～ 20 | 14 ～ 20 | ||
- | 1 Piece(s) | 17 Day(s) | 18 ～ 25 | 18 ～ 25 | 55 | 57 | 20.01~50.00 | 4001~10000 | 40 | 1.5 | 1.1~3.0 | 10000 | +0.6/-0.6 | 11x10-5 | - | - | ||
- | 1 Piece(s) | 17 Day(s) | 18 ～ 25 | - | 55 | 57 | 20.01~50.00 | 4001~10000 | 40 | 1.5 | 1.1~3.0 | 10000 | +0.6/-0.6 | 11x10-5 | 18 ～ 25 | - | ||
- | 1 Piece(s) | 17 Day(s) | - | 18 ～ 25 | 55 | 57 | 20.01~50.00 | 4001~10000 | 40 | 1.5 | 1.1~3.0 | 10000 | +0.6/-0.6 | 11x10-5 | - | 18 ～ 25 | ||
- | 1 Piece(s) | 17 Day(s) | - | - | 55 | 57 | 20.01~50.00 | 4001~10000 | 40 | 1.5 | 1.1~3.0 | 10000 | +0.6/-0.6 | 11x10-5 | 18 ～ 25 | 18 ～ 25 | ||
- | 1 Piece(s) | 17 Day(s) | 22 ～ 35 | 22 ～ 35 | 70 | 77 | 50.01~100.00 | 4001~10000 | 72 | 2 | 1.1~3.0 | 8000 | +0.8/-0.8 | 40x10-5 | - | - | ||
- | 1 Piece(s) | 17 Day(s) | 22 ～ 35 | - | 70 | 77 | 50.01~100.00 | 4001~10000 | 72 | 2 | 1.1~3.0 | 8000 | +0.8/-0.8 | 40x10-5 | 22 ～ 35 | - | ||
- | 1 Piece(s) | 17 Day(s) | - | 22 ～ 35 | 70 | 77 | 50.01~100.00 | 4001~10000 | 72 | 2 | 1.1~3.0 | 8000 | +0.8/-0.8 | 40x10-5 | - | 22 ～ 35 | ||
- | 1 Piece(s) | 17 Day(s) | - | - | 70 | 77 | 50.01~100.00 | 4001~10000 | 72 | 2 | 1.1~3.0 | 8000 | +0.8/-0.8 | 40x10-5 | 22 ～ 35 | 22 ～ 35 | ||
- | 1 Piece(s) | 17 Day(s) | 14 ～ 22 | 14 ～ 22 | 44 | 46 | 20.01~50.00 | 10001~78000 | 30 | 1 | 0.41~1.0 | 12000 | +0.5/-0.5 | 4×10-5 | - | - | ||
- | 1 Piece(s) | 17 Day(s) | 14 ～ 22 | - | 44 | 46 | 20.01~50.00 | 10001~78000 | 30 | 1 | 0.41~1.0 | 12000 | +0.5/-0.5 | 4×10-5 | 14 ～ 22 | - | ||
- | 1 Piece(s) | 17 Day(s) | - | 14 ～ 22 | 44 | 46 | 20.01~50.00 | 10001~78000 | 30 | 1 | 0.41~1.0 | 12000 | +0.5/-0.5 | 4×10-5 | - | 14 ～ 22 | ||
- | 1 Piece(s) | 17 Day(s) | - | - | 44 | 46 | 20.01~50.00 | 10001~78000 | 30 | 1 | 0.41~1.0 | 12000 | +0.5/-0.5 | 4×10-5 | 14 ～ 22 | 14 ～ 22 | ||
- | 1 Piece(s) | 17 Day(s) | 18 ～ 26 | 18 ～ 26 | 55 | 57 | 20.01~50.00 | 4001~10000 | 45 | 1.5 | 1.1~3.0 | 10000 | +0.6/-0.6 | 11x10-5 | - | - | ||
- | 1 Piece(s) | 17 Day(s) | 18 ～ 26 | - | 55 | 57 | 20.01~50.00 | 4001~10000 | 45 | 1.5 | 1.1~3.0 | 10000 | +0.6/-0.6 | 11x10-5 | 18 ～ 26 | - | ||
- | 1 Piece(s) | 17 Day(s) | - | 18 ～ 26 | 55 | 57 | 20.01~50.00 | 4001~10000 | 45 | 1.5 | 1.1~3.0 | 10000 | +0.6/-0.6 | 11x10-5 | - | 18 ～ 26 | ||
- | 1 Piece(s) | 17 Day(s) | - | - | 55 | 57 | 20.01~50.00 | 4001~10000 | 45 | 1.5 | 1.1~3.0 | 10000 | +0.6/-0.6 | 11x10-5 | 18 ～ 26 | 18 ～ 26 | ||
- | 1 Piece(s) | 17 Day(s) | 22 ～ 38 | 22 ～ 38 | 70 | 77 | 50.01~100.00 | 4001~10000 | 80 | 2 | 1.1~3.0 | 8000 | +0.8/-0.8 | 40x10-5 | - | - | ||
- | 1 Piece(s) | 17 Day(s) | 22 ～ 38 | - | 70 | 77 | 50.01~100.00 | 4001~10000 | 80 | 2 | 1.1~3.0 | 8000 | +0.8/-0.8 | 40x10-5 | 22 ～ 38 | - | ||
- | 1 Piece(s) | 17 Day(s) | - | 22 ～ 38 | 70 | 77 | 50.01~100.00 | 4001~10000 | 80 | 2 | 1.1~3.0 | 8000 | +0.8/-0.8 | 40x10-5 | - | 22 ～ 38 | ||
- | 1 Piece(s) | 17 Day(s) | - | - | 70 | 77 | 50.01~100.00 | 4001~10000 | 80 | 2 | 1.1~3.0 | 8000 | +0.8/-0.8 | 40x10-5 | 22 ～ 38 | 22 ～ 38 |
Loading...
Basic Information
| Series Name | Oldham | Application | Standard | Features | High Torque Type / Low Moment of Inertia |
|---|---|---|---|---|---|
| Allowable Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Body Material | Aluminum | Allowable Angular Misalignment(deg) | 2 |
| Product Category | Coupling Main Body | Buffer Material | Polyacetal | Operating Temperature(°C) | -20::80 |
Specification/Dimensions
-
Shaft Bore Dia. 1 d1 (or d)(Ø)
-
Shaft Bore Dia. 2 d2 (or d)(Ø)
-
O.D.(Ø)
-
Overall Length(mm)
-
Allowable Torque Range(N•m)
-
Max. Rotational Speed Range(r/min)
-
Allowable Torque(N•m)
-
Allowable Lateral Misalignment(mm)
-
Allowable Lateral Misalignment Range(mm)
-
Max. Rotational Speed(r/min)
-
Shaft I.D. d2 Change Hole Dia. [RDC] Specified in 0.1mm Increment
-
Shaft I.D. d1 Change Hole Dia. [LDC] Specified in 0.1mm Increment
-
type
- EA-MFJCLK
- EA-MFJCRK
- EA-MFJCWK
- EA-MFJWK
Days to Ship
-
- All
- 17 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Bellows Couplings - Set Screw / Clamping
- Jaw Couplings Set Screw Type
- Couplicon Bellows Flexible Coupling MKM
- Precision Axial Fitting-Spring Type, LCD-T7 Series
- Miniature Bellows Coupling MBC Series
- Oldham Coupling - Set Screw Short Type - [LK4-12S]
- Disc-Shaped Coupling - Clamping Type (Single Disc)
- Disc Coupling Set Screw Type (Double Disc) SHDW
Complementary Products
-
Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - One End Stepped and Threaded, One End Tapped
MISUMI Days to Ship : 5 Day(s) or more
-
Bearings with Housings - Direct Mount, Compact
MISUMI Standard Price : MYR 52.12- Days to Ship : 2 Day(s) or more
-
Angular Contact Bearings with Housings - Angular Contact Back-to-Back Combination + Deep Groove Ball Bearings, Flanged
MISUMI Standard Price : MYR 1,735.26- Days to Ship : 8 Day(s) or more
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy