(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
[Simplified Adjustments] X-Axis, Lead Screw Type (E-XPHG25)
![[Simplified Adjustments] X-Axis, Lead Screw Type E-XPHG25](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110311156139_001.jpg?$product_main$)
Part Number
Configured Part Number is shown.
E-XPHG25
Product Overview
This simple adjustment unit is a fixed-size model, with both the guide section and the feed section utilizing simple mechanisms.
It can be flexibly applied for fine adjustments in applications that do not require high precision, such as jigs, tools, cameras, sensors, nozzles, and conveyor width.
It can be flexibly applied for fine adjustments in applications that do not require high precision, such as jigs, tools, cameras, sensors, nozzles, and conveyor width.
Dimensional Drawing
| E-XPHG20 | E-XPHG25 |
 |  |
| E-XPHG40 | E-XPHG40A |
 |  |
| E-XPHG60 | E-XPHG60A |
 |  |
| Type |  Main Material |  Surface Treatment |
| E-XPHG | Aluminum Alloy | Black Anodized |
Specification Overview
Please follow the selection steps 
~
to choose the type and parameters before placing an order.
■ Travel Distance
The dimensions in the catalog drawings represent the state when the stroke is 0 mm. Based on this as the reference, the distance moved to the left (up) or right (down) is the travel distance. Movement to the left (up) is positive, and movement to the right (down) is negative.
■ Load capacity
Refers to the force that the slide table can withstand when the workpiece's center of gravity is located at the center of the slide table, measured in N. If used beyond the load capacity, the slide table may not operate smoothly or may become stuck.
For the load capacity during horizontal and vertical installation, please refer to the values for "Horizontal" and "Vertical" respectively. When installing the linear motion slide table vertically or upside down, the accuracy may be less than the values indicated in the product catalog. Please take note.
~
to choose the type and parameters before placing an order.| Part Number (Type·No.) | ||
| E-XPHG20 |
| Part Number | Stage Surface (mm) | Travel Distance (mm) | Travel Distance per Revolution (mm) | Load Capacity (N) | Net Weight (kg) | ||
| Type | No. | Horizontal | Vertical | ||||
| E-XPHG | 20 | 20X20 | ±7 | 0.7 | 19.6 | 9.8 | 0.04 |
| 25 | 25X25 | 0.05 | |||||
| 40 | 40X40 | ±9 | 39.2 | 19.6 | 0.11 | ||
| 40A | 40X25 | ±17 | 0.1 | ||||
| 60 | 60X60 | ±13 | 0.18 | ||||
| 60A | 60X40 | ±23 | 0.15 | ||||
■ Travel Distance
The dimensions in the catalog drawings represent the state when the stroke is 0 mm. Based on this as the reference, the distance moved to the left (up) or right (down) is the travel distance. Movement to the left (up) is positive, and movement to the right (down) is negative.
■ Load capacity
Refers to the force that the slide table can withstand when the workpiece's center of gravity is located at the center of the slide table, measured in N. If used beyond the load capacity, the slide table may not operate smoothly or may become stuck.
For the load capacity during horizontal and vertical installation, please refer to the values for "Horizontal" and "Vertical" respectively. When installing the linear motion slide table vertically or upside down, the accuracy may be less than the values indicated in the product catalog. Please take note.
Product Features
Feature 1: The main body is made of aluminum alloy, achieving a lightweight design.
Feature 2: You can choose between a standard knob type or a large knob type according to your needs.
Feature 2: You can choose between a standard knob type or a large knob type according to your needs.
Example of Use
Mechanism name: Paper position adjustment mechanism
Application:
Install the roll paper above the simple adjustment component. By adjusting the left and right position of the simple adjustment component,
the center of the roll paper is kept aligned with the center of the roller, enabling smooth, resistance-free feeding of the roll paper.
Application:
Install the roll paper above the simple adjustment component. By adjusting the left and right position of the simple adjustment component,
the center of the roll paper is kept aligned with the center of the roller, enabling smooth, resistance-free feeding of the roll paper.
Application Industries
| Electronics/Home Appliances | Automotive | Medical | ||
 |  |  | ||
| Smartphones | Semiconductors | Lithium batteries | ||
 |  |  |
Related Products
| Manual Operated Unit Standard Horizontal Type | Single Axis Actuator | Single Axis Unit | ||
 |  |  | ||
| Representative model: KUE20-A-170 | Representative model: LX3010-B1-N-600 | Representative model: KUH1205-460-100 |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Basic Information
| Table Material | Aluminum Alloy | Feeding Method | Feed Screw | Table Surface Treatment | Black Anodized |
|---|---|---|---|---|---|
| Travel Guide | Shaft Slide |
Please check the type/dimensions/specifications of the part E-XPHG25 in the [Simplified Adjustments] X-Axis, Lead Screw Type series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Why does the stage still wobble after tightening the locking wrench (anti-rotation fixture)?
- Answer: The locking wrench only prevents the handwheel from turning and cannot completely secure the worktable. Backlash is inherent in the transmission between trapezoidal lead screws and nuts; this is a characteristic of the mechanism. If you need to completely secure the stage, we recommend using MISUMI Modular Components, which allow you to add a stage fixing plate.
- Question: Where can I find the specific model numbers of the trapezoidal lead screws, linear guides, and other parts used in the manual components?
- Answer: MISUMI manual components are sold as complete units, and specific models for lead screws and guide rails cannot be provided. If the customer modifies or replaces parts on their own, it will be considered a waiver of the quality guarantee. If you need to replace or repair parts, please contact MISUMI directly.
- Question: Are the manual components (KUE, KUL) listed on the website and in the printed catalog different products from the modular components in the inCAD Library case studies?
- Answer: The modular components in the inCAD Library case database are new products with significantly expanded specifications compared to the printed catalog.
- Question: What are the differences between the manual components (KUE, KUL) listed on the website and in the printed catalog, and the modular components in the inCAD Library case studies?
- Answer: In addition to offering more style options, the shape of the main body cross-section, the length of the handwheel shaft, the support method for the trapezoidal screw, the shape of the bearing housing, and the shape of the gearbox are all different. For details, please refer to the CAD data or the automatically generated PDF for the configurable components.
- Question: What does allowable load mean?
- Answer: The load that can be moved smoothly under loaded conditions. For horizontal use, place the load in the center of the worktable; for vertical use, place the load above the lifting worktable.
Products like this...
| Part Number |
|---|
| E-XPHG20 |
| E-XPHG40 |
| E-XPHG40A |
| E-XPHG60 |
| E-XPHG60A |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Table Size (Width) W (mm) | Table Size (Length) L (mm) | Travel Distance (X-Axis) (mm) | Load Capacity |
|---|---|---|---|---|---|---|---|---|
MYR 224.96 | 1 Piece(s) | 16 Day(s) | 20 | 20 | ±7 | 19.6 | ||
MYR 286.82 | 1 Piece(s) | 16 Day(s) | 40 | 40 | ±9 | 39.2 | ||
MYR 286.82 | 1 Piece(s) | 16 Day(s) | 25 | 40 | ±17 | 39.2 | ||
MYR 317.75 | 1 Piece(s) | 16 Day(s) | 60 | 60 | ±13 | 39.2 | ||
MYR 317.75 | 1 Piece(s) | 16 Day(s) | 40 | 60 | ±23 | 39.2 |
Additional Products in this Category
- Manually Operated Units/Single Table
- [Simplified Adjustments] X-Axis, Push Screw - Screw Length Standard/Selectable
- [Simplifi ed Adjustments] X-Axis, Feed Screw - Compact Type
- [Simplified Adjustments] X-Axis, Left/Right Screw, Open/Close Width Adjusting Units / Rack & Pinion, Standard, Standard/Precision Grade - Open/Close Width Adjusting Units
- Manually Operated Units/with Position Indicator
- Fixture Slides - Guide Rail Type
- [Simplified Adjustments] X-Axis, Double Guide Rail Ball Screw Type, Heavy Load, with Dust Cover
- [Simplified Adjustments] X-Axis, Double Guide Rail Lead Screw Type, Heavy Load, with Dust Cover
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy