(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Timing Belt Conveyor, Dual Track, Head Driver, Pulley Dia. 30mm
- Economy
MiSUMi Economy
Economy series Belt Conveyor
(i)Caution
- This single-phase motor is specified for 220V ±10%,50Hz/60Hz. Please ensure it is used within the permissible voltage range.
Part Number
Configured Part Number is shown.
Product Overview
Economy series conveyor, with a rational structural design and localized production. A variety of models are available to meet customers' design needs for different usage scenarios, providing better options.
E-CVGTA: Double-row synchronous belt conveyor, driven by motor and synchronous belt, achieves synchronous rotation of two rows of synchronous belts. Suitable for pallet transfer and assembly into equipment.
E-CVGTA: Double-row synchronous belt conveyor, driven by motor and synchronous belt, achieves synchronous rotation of two rows of synchronous belts. Suitable for pallet transfer and assembly into equipment.
Dimensional Drawing
E-CVGTA
Standard Nut Fitting Table for Profile Slot: L Value (Center Distance Unit: mm)
■ Details of A Dimension
Motor Specification: 6W*
When L > 1500, 1 set (2 pieces) of belt support rollers is included.
Support Component Notes:
When L<1000, there are two sets of support components
When L is 1000 to 1500, there are three sets of support components
When L>1500, there are four sets of support components
When L ≤ 500, there is no countersunk hole at position F, and 4 nuts are pre-installed on one side in the aluminum profile slot;
When L>500, a countersunk hole for nut insertion is reserved by default at position F, no additional machining is required.
When selecting a speed control motor, the speed controller is an accessory, not installed on the main unit, and does not come with a mounting bracket.
If you need a bracket for the speed controller, please use additional processing (SCB)
*Only the power affects the motor size. Please refer to the table below for dimension A. The external dimensions of the other components remain the same.
When L > 1500, 1 set (2 pieces) of belt support rollers is included.Support Component Notes:
When L<1000, there are two sets of support components
When L is 1000 to 1500, there are three sets of support components
When L>1500, there are four sets of support components
When L ≤ 500, there is no countersunk hole at position F, and 4 nuts are pre-installed on one side in the aluminum profile slot;When L>500, a countersunk hole for nut insertion is reserved by default at position F, no additional machining is required.
When selecting a speed control motor, the speed controller is an accessory, not installed on the main unit, and does not come with a mounting bracket.If you need a bracket for the speed controller, please use additional processing (SCB)
*Only the power affects the motor size. Please refer to the table below for dimension A. The external dimensions of the other components remain the same.
Enlarged Profile View (Symmetrical Left and Right)
Standard Nut Fitting Table for Profile Slot: L Value (Center Distance Unit: mm)
| L255 to 999 | L1000 to 1499 | L1500 or more | Position | Specifications | Configuration Type |
| 4PCS | 6PCS | 8PCS | Section I (Left/Right) | M3 (Hexagon) | Accessories |
| 4PCS | 6PCS | 8PCS | J Section (Left/Right) | M6 (Square) | Accessories |
| Motor Power | Motor | Reduction Ratio | A | |
| Specifications | Manufacturer | |||
| 6W | Variable Speed Motor | GPG | 3 to 18 | L107 |
| 25 to 180 | L117 | |||
| JSCC | 3 to 18 | L118 | ||
| 25 to 180 | L130 | |||
| 25W | Induction Motor / Variable Speed Motor | GPG | 3 to 18 | L118 |
| 25 to 180 | L130 | |||
| Induction Motor | JSCC | 3 to 18 | L119 | |
| 25 to 180 | L130 | |||
| Variable Speed Motor | 3 to 18 | L129 | ||
| 25 to 180 | L140 | |||
Material Table
| Part Name |  Material |  Surface Treatment |
| Frame | Aluminum | Electro Plating |
| Motor Cover Plate | Aluminum | Baked Paint |
| Pulley Housing | Aluminum | Baked Paint |
Specifications Overview
■ Timing Belt Center Distance - Pulley Center Distance Correspondence Table
| Part number | Timing Belt Center Distance B | Pulley Center Distance L | |||||
| L255 to 300 | L305 to 500 | L505 to 600 | L605 to 800 | L805 to 900 | L905 to 2000 | ||
| E-CVGTA | 80 to 110 | ● | ● | ● | ● | ● | ● |
| 120 to 160 | ● | ● | ● | ● | ● | ● | |
| 170 to 210 | ● | ● | ● | ● | ● | ● | |
| 220 to 260 | ● | ● | ● | ● | ● | ● | |
| 270 to 300 | ● | ● | ● | ● | ● | ● | |
Alterations
 |  Part Number | - |  B | - |  L | - | Motor Selection | - |  Belt Specifications | - |  Motor Manufacturer Selection | - | Alterations | ||||
 Output Power | - |  Specifications | - |  Gear Head Reduction Ratio | |||||||||||||
| E-CVGTA | - | 100 | - | 1000 | - | 6 | - | SCM | - | 25 | - | H | - | G | - | MK | |
| Alterations | Code | Spec |
Motor Installation Position Reversed | MK | The motor installation position can be changed. Ordering CodeMK Only head-driven type can be specified. |
Mounting Bracket for Speed Controller | SCB | Includes mounting bracket for speed controller. Ordering Code SCB |
Specification Table
Please order after selecting part number and parameters according to the selection steps 
to 
.
■Specification Table
If you need to use a stepper motor or servo motor for automatic control, you can choose the model without a motor and gear head.
When selecting without a motor and gear head, the motor mounting hole pitch will vary depending on the motor output power.
When selecting without motor and gear head, the main unit will be delivered as parts. Please assemble by following the assembly instructions included in the same package.
For belts other than those listed above, please refer to the specification overview. Click 
here.
to . | Part Number | - | B | - | L | - | Motor Selection | - | Belt Specifications | - | Motor Manufacturer Selection | ||||
| Output Power | - | Specifications | - | Gear Head Reduction Ratio | |||||||||||
| Without belt Without motor or gear head | E-CVGTA E-CVGTA E-CVGTA | - - - | 100 100 100 | - - - | 1000 1000 1000 | - - - | 6 25 25 | - - - | SCM SCM NM | - - - | 25 30 NH | - - - | H J H | - - - | G G R |
■Specification Table
| Part Number | Shape | Model Features |
| E-CVGTA | Light Duty Side Guide Type | Tooth surface fabric for noise reduction, supports precision positioning and conveying |
| Part Number | B can be specified down to 10 mm increments | L Can be specified down to 5mm increments | Motor Selection | Belt Specifications | Motor | ||
| Output Power (W) | Specifications | Gear Head Reduction Ratio | |||||
| E-CVGTA | 80 to 300 | 255 to 2000 | 6 25 Note: 6 Not suitable for frequency conversion | SCM (Single-phase 220V Variable Speed Motor) | 5 7.5 10 12.5 15 18 25 30 36 50 60 75 90 100 120 150 180 Note: When the output power is 6, 5–10 is not applicable | H(General-purpose · White toothed surface tape) S(For sliding · Green double-sided tape) D(Antistatic · Black double-sided tape) J(No belt) | G(GPG Motor) J(JSCC Motor) |
| INV (Three-Phase 220V Induction Motor) | |||||||
| NM(No Motor) | NH(No Gear Head) | R(No Motor · Gear Head) | |||||
If you need to use a stepper motor or servo motor for automatic control, you can choose the model without a motor and gear head.When selecting without a motor and gear head, the motor mounting hole pitch will vary depending on the motor output power.When selecting without motor and gear head, the main unit will be delivered as parts. Please assemble by following the assembly instructions included in the same package.For belts other than those listed above, please refer to the specification overview. Click 
here.■ Conveying Capacity
The chart shows the conveying capacity under horizontal conditions.
The conveying capacity may vary depending on the operating conditions.
When selecting a speed control motor, the conveying capacity does not increase as the speed decreases.
The chart shows the conveying capacity under horizontal conditions.The conveying capacity may vary depending on the operating conditions.When selecting a speed control motor, the conveying capacity does not increase as the speed decreases.■ Gear Head Reduction Ratio
| Gear Head Reduction Ratio | Timing Belt Speed (m/min) | |
| SCM Speed Control Type | INV Inverter Type | |
| 5 | 32.6 to 54.3 | 67.5 |
| 7.5 | 21.7 to 36.2 | 45.0 |
| 10 | 16.3 to 27.1 | 33.8 |
| 12.5 | 13.0 to 21.7 | 27.0 |
| 15 | 10.9 to 18.1 | 22.5 |
| 18 | 9.0 to 15.1 | 18.8 |
| 25 | 6.5 to 10.9 | 13.5 |
| 30 | 5.4 to 9.0 | 11.3 |
| 36 | 4.5 to 7.5 | 9.4 |
| 50 | 3.3 to 5.4 | 6.8 |
| 60 | 2.7 to 4.5 | 5.6 |
| 75 | 2.2 to 3.6 | 4.5 |
| 90 | 1.8 to 3.0 | 3.8 |
| 100 | 1.6 to 2.7 | 3.4 |
| 120 | 1.4 to 2.3 | 2.8 |
| 150 | 1.1 to 1.8 | 2.3 |
| 180 | 0.9 to 1.5 | 1.9 |
Product Features
Feature 1: Simplifies belt replacement steps and improves maintainability.
Feature 2: The conveyor body is made of aluminum profiles, achieving an overall lightweight design.
Feature 3: Double-row narrow-width toothed belt, suitable for conveying jig tray products, supports precise positioning and conveying.
Feature 4: The timing belt center distance can be specified in 10 mm increments, and the pulley spacing can be specified in 5 mm increments.
Feature 2: The conveyor body is made of aluminum profiles, achieving an overall lightweight design.
Feature 3: Double-row narrow-width toothed belt, suitable for conveying jig tray products, supports precise positioning and conveying.
Feature 4: The timing belt center distance can be specified in 10 mm increments, and the pulley spacing can be specified in 5 mm increments.
Precautions
(1) When installing onto equipment, ensure the flatness of the aluminum profile.
(2) Do not disassemble or modify the conveyor by yourself to avoid performance issues.
(3) Due to different conveyor usage environments, MISUMI conveyors do not come with a power supply, cables, or switches.
(4) In applications, due to issues with machine structure strength and body deformation, please do not exceed the allowable load and length/width when selecting models.
(5) Even when the motor is operating normally, its surface temperature may sometimes exceed 70°C . Be sure to take precautions to avoid burns.
(6) If operated in the opposite direction to the standard running direction, abnormal conditions such as belt misalignment, belt damage, noise, or jamming may occur. Please avoid use. (The standard shipping direction is as shown below)
(2) Do not disassemble or modify the conveyor by yourself to avoid performance issues.
(3) Due to different conveyor usage environments, MISUMI conveyors do not come with a power supply, cables, or switches.
(4) In applications, due to issues with machine structure strength and body deformation, please do not exceed the allowable load and length/width when selecting models.
(5) Even when the motor is operating normally, its surface temperature may sometimes exceed 70°C . Be sure to take precautions to avoid burns.
(6) If operated in the opposite direction to the standard running direction, abnormal conditions such as belt misalignment, belt damage, noise, or jamming may occur. Please avoid use. (The standard shipping direction is as shown below)
Application Industries
| Equipment Production | Semiconductor | Lithium battery | ||
 |  |  | ||
| Food | Electronic & Electrical Appliances | Robotics | ||
 |  |  |
Related Products
| Economy Conveyor with Synchronous Timing Belt, Double Row Center Drive Pulley Diameter 30 mm | Economy Conveyor, Synchronous Timing Belt, Single Row Head Drive Pulley Diameter 19 mm 20 mm | Economy Conveyor Synchronous Timing Belt Double-Row Head Drive Pulley Diameter 50 mm | ||
 |  |  | ||
| Representative Model: E-CVGTN | Representative Model: E-CVSTC | Representative Model: E-CVGTB |
Related Documents
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-CVGTA-[80-300/10]-[255-2000/5]-6-[NM,SCM]-NH-[D,H,J,S]-[G,J,R] |
| E-CVGTA-[80-300/10]-[255-2000/5]-6-SCM-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-[D,H,J,S]-[G,J,R] |
| E-CVGTA-[80-300/10]-[255-2000/5]-25-[INV,NM,SCM]-NH-[D,H,J,S]-[G,J,R] |
| E-CVGTA-[80-300/10]-[255-2000/5]-25-[INV,SCM]-[5,7.5,10,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180]-[D,H,J,S]-[G,J,R] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Conveyance Length | Belt Width/Belt Pitch B (mm) | Output Power (W) | Specifications | Gear Head Reduction Ratio | Belt Specifications | Motor |
|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 17 Day(s) | 255 ～ 2000 | 80 ～ 300 | 6 | SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | Anti-static · Black Double-sided Fabric / For Sliding · Green Double-sided Tape / General Use · White Tooth Surface Cloth Tape / No belt | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 17 Day(s) | 255 ～ 2000 | 80 ～ 300 | 6 | SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | Anti-static · Black Double-sided Fabric / For Sliding · Green Double-sided Tape / General Use · White Tooth Surface Cloth Tape / No belt | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 17 Day(s) | 255 ～ 2000 | 80 ～ 300 | 25 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) / NM (No Motor) | NH (Gearless Head) | Anti-static · Black Double-sided Fabric / For Sliding · Green Double-sided Tape / General Use · White Tooth Surface Cloth Tape / No belt | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) | ||
- | 1 Piece(s) | 17 Day(s) | 255 ～ 2000 | 80 ～ 300 | 25 | INV (Three-phase 220 V Inverter Type) / SCM (Single-phase 220 V Speed Control Type) | 5 ～ 180 | Anti-static · Black Double-sided Fabric / For Sliding · Green Double-sided Tape / General Use · White Tooth Surface Cloth Tape / No belt | G (GPG Motor) / J (JSCC Motor) / R (No Motor · Gear Head) |
Loading...
Basic Information
| Drive Module Position | Multi-Track Head Drive | Meandering Prevention | Pulley crowned for meandering prevention | Tail Roller Dia. D (Tail Transfer Part R)(mm) | 30 |
|---|---|---|---|---|---|
| Drive Roller Dia.(mm) | 30 | Type | Light Duty Side Guide Type |
Specification/Dimensions
-
Conveyance Length
-
Belt Width/Belt Pitch B(mm)
-
Output Power (W)
-
Specifications
- INV (Three-phase 220 V Inverter Type)
- SCM (Single-phase 220 V Speed Control Type)
- NM (No Motor)
-
Gear Head Reduction Ratio
-
Belt Specifications
- Anti-static · Black Double-sided Fabric
- For Sliding · Green Double-sided Tape
- General Use · White Tooth Surface Cloth Tape
- No belt
-
Motor
- G (GPG Motor)
- J (JSCC Motor)
- R (No Motor · Gear Head)
-
type
- E-CVGTA
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 17 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Can the conveyor's operating direction be set to reverse?
- Answer: The current conveyor does not support reverse operation. If reverse operation is required, please contact customer service for customization.
- Question: Conveyor belt deviation is a product characteristic. How can the frequency of deviation be reduced?
- Answer: The main methods to prevent conveyor belt deviation are arc-shaped rollers and belts with guide strips. Curved rollers are suitable for lengths up to 2000 mm; belts with guide strips are suitable for long distances over 2000 mm.
- Question: If the existing standard models cannot meet your requirements and you need to modify the model but are concerned about debugging issues, do you have any good suggestions?
- Answer: For this situation, please contact customer service for customization to meet your individual needs.
- Question: If I need a stepper motor or a servo motor, can you provide them?
- Answer: You can select a conveyor model without a motor or speed controller and purchase a motor separately for assembly.
Additional Products in this Category
- Flat Belt Conveyor Motor Integrated Type - 3-Groove Frame
- Flat Belt Conveyor High Power Type - With Meandering Prevention Crosspiece, Head Drive, 3-Groove Frame (Pulley Dia. 60mm / 30mm)
- Flat Belt Conveyor High Power Type - With Meandering Prevention Crosspiece, Center Drive, 3-Groove Frame (Pulley Dia. 30mm)
- Flat Belt Conveyor with Backlight, Center Drive, Pulley Dia. 50mm
- Timing Belt Conveyor, Dual Track, Center Driver, Pulley Dia. 30mm
- Flat Belt Conveyor, Center Drive, Pulley Dia. 30mm
- Belgotch MODEL34 Standard Model
- Belcon Mini III Short Machine Length Roller Edge Type for Transferring Small Items Between Conveyors DMJR
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy