[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Square Rack, Pressure Angle 20°, Length Fixed (Part Numbers)

Volume Discount

MISUMI

MiSUMi Economy

MISUMI

Part Number

Configured Part Number is shown.

Product Overview

Rack is often used together with gears and is a type of mechanical component used for transmission. Allows rotational displacement to be transmitted linearly, and linear displacement to be transmitted rotationally.
Gear rack drive mechanisms can be used in elevators, rail systems, automotive steering systems, machine tools, and actuator feed mechanisms, among other fields.

Dimensional Drawing

■ Fixed Hole Type	■ Hole position configurable
	A+B+C ≤ L-5 Maximum number of holes: 3

Metal: L size tolerance (mm)

Accuracy: Cumulative Pitch Error (Unit: µm)

Module	P Tolerance
0.5 to 2.0	-0.1 -0.3
2.5 to 3.0	-0.1 -0.4

Module	L tolerance
0.5 to 2.0	-0.2 to -0.6
2.5 to 3.0	-0.2 to -0.8

Module	Nominal model
Module	100	300	500	1000
0.5 to 1.5	54(76)	65(92)	72(101)	100(117)
2.0 to 3.0	62(86)	73(102)	80(112)	81(128)

( ) indicates the corresponding dimensions for E-RGSAS·E-SRGSAS

Material Table

Type		Material	Surface Treatment
Fixed hole position	Designated hole position type	Material	Surface Treatment
E-RGSA	E-SRGSA	Steel	Black Oxide Film
E-RGSAS	E-SRGSAS	Stainless Steel	-

Both ends of this series are machined. Please pay attention when selecting.

The hole machining surface is not surface treated. Please note.

This series of products is not heat treated. If needed, please select the high-frequency quenching series products.

If rust prevention is required, please prioritize stainless steel products. For details, please refer to Rust Prevention Performance and Maintenance of Metal Materials and Their Surface Treatments.

For the electronic catalog, please click here to get it

Alteration

Alterations	Additional female thread machining on one end face	Additional female thread machining on both ends
Code	MC	WMC
Spec.

Specification Table

● Specification Table
●Fixed Hole Type

Part Number				Effective Number of Teeth	Total length L	P (Pitch)	W	H	h	B (Hole Pitch)	M (Coarse Thread)	d1	d2	Z1	K (Number of Holes)
Type	Module	Nominal model	Hole machining
E-RGSA (Steel) E-RGSAS (Stainless Steel)	1.0	100	N (No hole machining) HT (Reverse Side Threaded Hole) ST (Side Threaded Hole) Z (Side Counterbore)	30	94.25	3.142	17 (10)	17 (10)	16 (9)	180	M3	3.5	6.5	3.5	-
		300		95	298.45										2
		500		159	499.51										3
		1000		318	999.02										6
	1.5	100		21	98.96	4.712	17 (15)	17 (15)	15.5 (13.5)		M4	4.5	8	4.5	-
		300		63	296.88										2
		500		106	499.51										3
		1000		212	999.02										6
	2.0	100		15	94.25	6.283	24 (20)	24 (20)	22 (18)		M5	5.5	9.5	5.5	-
		300		47	295.31										2
		500		79	496.37										3
		1000		159	999.02										6
	2.5	100		12	94.25	7.854	24 (25)	24 (25)	21.5 (22.5)		M5	5.5	9.5	5.5	-
		300		38	298.45										2
		500		63	494.8										3
		1000		127	997.4										6
	3.0	100		10	94.25	9.425	29 (30)	29 (30)	26 (27)		M5	5.5	9.5	5.5	-
		300		31	292.17										2
		500		53	499.51										3
		1000		106	999.02										6

For stainless steel material, please refer to the dimensions in ( )

● Hole Position Specification Type

Part Number				Hole positions A, B, C can be specified down to 1 mm increments	Effective Number of Teeth	Total length L	P (Pitch)	W	H	h	M (Coarse Thread)	d1	d2	Z1
Type	Module	Nominal model	Hole machining
E-SRGSA (Steel) E-SRGSAS (Stainless Steel)	1.0	100	HT (Reverse Side Threaded Hole) ST (Side Threaded Hole) Z (Side Counterbore)	5 to 89	30	94.25	3.142	17 (10)	17 (10)	16 (9)	M3	3.5	6.5	3.5
		300		5 to 293	95	298.45
		500		5 to 494	159	499.51
		1000		5 to 994	318	999.02
	1.5	100		5 to 93	21	98.96	4.712	17 (15)	17 (15)	15.5 (13.5)	M4	4.5	8	4.5
		300		5 to 291	63	296.88
		500		5 to 494	106	499.51
		1000		5 to 994	212	999.02
	2.0	100		6 to 88	15	94.25	6.283	24 (20)	24 (20)	22 (18)	M5	5.5	9.5	5.5
		300		6 to 289	47	295.31
		500		6 to 490	79	496.37
		1000		6 to 993	159	999.02
	2.5	100		6 to 88	12	94.25	7.854	24 (25)	24 (25)	21.5 (22.5)	M5	5.5	9.5	5.5
		300		6 to 292	38	298.45
		500		6 to 488	63	494.8
		1000		6 to 991	127	997.4
	3.0	100		6 to 88	10	94.25	9.425	29 (30)	29 (30)	26 (27)	M5	5.5	9.5	5.5
		300		6 to 292	31	292.17
		500		6 to 488	53	499.51
		1000		6 to 991	106	999.02

Both ends of this product series are machined. Please pay attention when selecting.

For stainless steel material, please refer to the dimensions in parentheses.

Product Features

Feature 1: Can be converted between rotary motion and linear motion.
Feature 2: Selectable length and mounting hole processing method.
Feature 3: You can choose between standard steel and stainless steel racks according to actual operating requirements.
Feature 4: The hole machining method can be freely selected: no hole machining, back side tapped hole machining, side counterbore machining, or side tapped hole machining.
Feature 5: Optimized cross-sectional shape, better suited for domestic usage environments

Usage Method

■ Linear Motion: Rack and Pinion Drive

Bracket Micro Gear Type Slide Table Assembly
Case 1: Linear Motion Using Gear and Rack Drive

Positioning Mechanism for Basic Frame
Case 2: Linear Motion Using Gear and Rack Drive

Precautions

■ Cutting Method for Rack End Face


Cut according to the length of the effective number of teeth (tooth root)	Cut from the reference surface to the specified length, excluding the teeth.

■ Rack Connection Method
The end face machining accuracy of MISUMI racks is less than the pitch.
Therefore, please leave a gap between the two racks as shown in the diagram below, and connect them after adjusting the pitch using a combination rack (racks with the same module).
Rack Connection Method Instructions

Example of Use

Reference Cases for Gear and Rack Combination

Equipment Name: n-speed Mechanism

Feature 1:	The use of fixed and movable racks in combination with large and small gears doubles the cylinder stroke distance.
Feature 2:	After setting the ratio of the small gear to the large gear to 1:n, the stroke can be converted to n times.
Feature 3:	By placing the moving base side gear on the centerline of the cylinder and symmetrically arranging the fixed rack side gears on both sides, force deviation can be eliminated.
Feature 4:	Install the lower rack (custom-sized holes) or add/remove shims to adjust the position of the rack and pinion.

For more information, please click

n-times speed mechanism

Application Industries

Food	Semiconductor	Smart phone

Medical	Electronic & Electrical Appliances	Lithium battery

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
E-RGSAS1.0-300-ST
E-RGSAS1.0-300-Z
E-RGSAS1.0-500-HT
E-RGSAS1.0-500-N
E-RGSAS1.0-500-ST
E-RGSAS1.0-500-Z
E-RGSAS1.5-1000-HT
E-RGSAS1.5-1000-N
E-RGSAS1.5-1000-ST
E-RGSAS1.5-1000-Z
E-RGSAS1.5-100-HT
E-RGSAS1.5-100-N
E-RGSAS1.5-100-ST
E-RGSAS1.5-100-Z
E-RGSAS1.5-300-HT
E-RGSAS1.5-300-N
E-RGSAS1.5-300-ST
E-RGSAS1.5-300-Z
E-RGSAS1.5-500-HT
E-RGSAS1.5-500-N
E-RGSAS1.5-500-ST
E-RGSAS1.5-500-Z
E-RGSAS2.0-1000-HT
E-RGSAS2.0-1000-N
E-RGSAS2.0-1000-ST
E-RGSAS2.0-1000-Z
E-RGSAS2.0-100-HT
E-RGSAS2.0-100-N
E-RGSAS2.0-100-ST
E-RGSAS2.0-100-Z
E-RGSAS2.0-300-HT
E-RGSAS2.0-300-N
E-RGSAS2.0-300-ST
E-RGSAS2.0-300-Z
E-RGSAS2.0-500-HT
E-RGSAS2.0-500-N
E-RGSAS2.0-500-ST
E-RGSAS2.0-500-Z
E-RGSAS2.5-1000-HT
E-RGSAS2.5-1000-N
E-RGSAS2.5-1000-ST
E-RGSAS2.5-1000-Z
E-RGSAS2.5-100-HT
E-RGSAS2.5-100-N
E-RGSAS2.5-100-ST
E-RGSAS2.5-100-Z
E-RGSAS2.5-300-HT
E-RGSAS2.5-300-N
E-RGSAS2.5-300-ST
E-RGSAS2.5-300-Z
E-RGSAS2.5-500-HT
E-RGSAS2.5-500-N
E-RGSAS2.5-500-ST
E-RGSAS2.5-500-Z
E-RGSAS3.0-1000-HT
E-RGSAS3.0-1000-N
E-RGSAS3.0-1000-ST
E-RGSAS3.0-1000-Z
E-RGSAS3.0-100-HT
E-RGSAS3.0-100-N
E-RGSAS3.0-100-ST
E-RGSAS3.0-100-Z
E-RGSAS3.0-300-HT
E-RGSAS3.0-300-N
E-RGSAS3.0-300-ST
E-RGSAS3.0-300-Z
E-RGSAS3.0-500-HT
E-RGSAS3.0-500-N
E-RGSAS3.0-500-ST
E-RGSAS3.0-500-Z
E-SRGSA1.0-1000-HT-A[5-994/1]
E-SRGSA1.0-1000-ST-A[5-994/1]
E-SRGSA1.0-1000-Z-A[5-994/1]
E-SRGSA1.0-100-HT-A[5-89/1]
E-SRGSA1.0-100-ST-A[5-89/1]
E-SRGSA1.0-100-Z-A[5-89/1]
E-SRGSA1.0-300-HT-A[5-293/1]
E-SRGSA1.0-300-ST-A[5-293/1]
E-SRGSA1.0-300-Z-A[5-293/1]
E-SRGSA1.0-500-HT-A[5-494/1]
E-SRGSA1.0-500-ST-A[5-494/1]
E-SRGSA1.0-500-Z-A[5-494/1]
E-SRGSA1.5-1000-HT-A[5-994/1]
E-SRGSA1.5-1000-ST-A[5-994/1]
E-SRGSA1.5-1000-Z-A[5-994/1]
E-SRGSA1.5-100-HT-A[5-93/1]
E-SRGSA1.5-100-ST-A[5-93/1]
E-SRGSA1.5-100-Z-A[5-93/1]
E-SRGSA1.5-300-HT-A[5-291/1]
E-SRGSA1.5-300-ST-A[5-291/1]

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Total Length L (mm)	Module	Tooth Width W (mm)	Surface Treatment	Number of Effective Teeth (teeth)	Rack Height (mm)	Hole machining	Style	Hole Position (1st) [ A ] (mm)
MYR 210.04	1 Piece(s)	Available	14 Day(s)	298.45	1	10	Not Provided	95	10	ST (Side Threaded Hole)	Fixed hole position	-
MYR 210.04	1 Piece(s)	Available	14 Day(s)	298.45	1	10	Not Provided	95	10	Z (Side Counterbore)	Fixed hole position	-
MYR 335.34	1 Piece(s)	Available	14 Day(s)	499.51	1	10	Not Provided	159	10	HT (Reverse Threaded Hole)	Fixed hole position	-
MYR 311.46	1 Piece(s)	Available	14 Day(s)	499.51	1	10	Not Provided	159	10	N (No Hole Machining)	Fixed hole position	-
MYR 335.34	1 Piece(s)	Available	14 Day(s)	499.51	1	10	Not Provided	159	10	ST (Side Threaded Hole)	Fixed hole position	-
MYR 335.34	1 Piece(s)	Available	14 Day(s)	499.51	1	10	Not Provided	159	10	Z (Side Counterbore)	Fixed hole position	-
MYR 613.30	1 Piece(s)	Available	14 Day(s)	999.02	1.5	15	Not Provided	212	15	HT (Reverse Threaded Hole)	Fixed hole position	-
MYR 565.44	1 Piece(s)	Available	14 Day(s)	999.02	1.5	15	Not Provided	212	15	N (No Hole Machining)	Fixed hole position	-
MYR 613.30	1 Piece(s)	Available	14 Day(s)	999.02	1.5	15	Not Provided	212	15	ST (Side Threaded Hole)	Fixed hole position	-
MYR 613.30	1 Piece(s)	Available	14 Day(s)	999.02	1.5	15	Not Provided	212	15	Z (Side Counterbore)	Fixed hole position	-
MYR 117.36	1 Piece(s)	Available	14 Day(s)	98.96	1.5	15	Not Provided	21	15	HT (Reverse Threaded Hole)	Fixed hole position	-
MYR 117.36	1 Piece(s)	Available	14 Day(s)	98.96	1.5	15	Not Provided	21	15	N (No Hole Machining)	Fixed hole position	-
MYR 117.36	1 Piece(s)	Available	14 Day(s)	98.96	1.5	15	Not Provided	21	15	ST (Side Threaded Hole)	Fixed hole position	-
MYR 117.36	1 Piece(s)	Available	14 Day(s)	98.96	1.5	15	Not Provided	21	15	Z (Side Counterbore)	Fixed hole position	-
MYR 231.44	1 Piece(s)	Available	14 Day(s)	296.88	1.5	15	Not Provided	63	15	HT (Reverse Threaded Hole)	Fixed hole position	-
MYR 215.48	1 Piece(s)	Available	14 Day(s)	296.88	1.5	15	Not Provided	63	15	N (No Hole Machining)	Fixed hole position	-
MYR 231.44	1 Piece(s)	Available	14 Day(s)	296.88	1.5	15	Not Provided	63	15	ST (Side Threaded Hole)	Fixed hole position	-
MYR 231.44	1 Piece(s)	Available	14 Day(s)	296.88	1.5	15	Not Provided	63	15	Z (Side Counterbore)	Fixed hole position	-
MYR 346.82	1 Piece(s)	Available	14 Day(s)	499.51	1.5	15	Not Provided	106	15	HT (Reverse Threaded Hole)	Fixed hole position	-
MYR 322.94	1 Piece(s)	Available	14 Day(s)	499.51	1.5	15	Not Provided	106	15	N (No Hole Machining)	Fixed hole position	-
MYR 346.82	1 Piece(s)	Available	14 Day(s)	499.51	1.5	15	Not Provided	106	15	ST (Side Threaded Hole)	Fixed hole position	-
MYR 346.82	1 Piece(s)	Available	14 Day(s)	499.51	1.5	15	Not Provided	106	15	Z (Side Counterbore)	Fixed hole position	-
MYR 633.68	1 Piece(s)	Available	14 Day(s)	999.02	2	20	Not Provided	159	20	HT (Reverse Threaded Hole)	Fixed hole position	-
MYR 614.56	1 Piece(s)	Available	14 Day(s)	999.02	2	20	Not Provided	159	20	N (No Hole Machining)	Fixed hole position	-
MYR 633.68	1 Piece(s)	Available	14 Day(s)	999.02	2	20	Not Provided	159	20	ST (Side Threaded Hole)	Fixed hole position	-
MYR 633.68	1 Piece(s)	Available	14 Day(s)	999.02	2	20	Not Provided	159	20	Z (Side Counterbore)	Fixed hole position	-
MYR 129.56	1 Piece(s)	Available	14 Day(s)	94.25	2	20	Not Provided	15	20	HT (Reverse Threaded Hole)	Fixed hole position	-
MYR 129.56	1 Piece(s)	Available	14 Day(s)	94.25	2	20	Not Provided	15	20	N (No Hole Machining)	Fixed hole position	-
MYR 129.56	1 Piece(s)	Available	14 Day(s)	94.25	2	20	Not Provided	15	20	ST (Side Threaded Hole)	Fixed hole position	-
MYR 129.56	1 Piece(s)	Available	14 Day(s)	94.25	2	20	Not Provided	15	20	Z (Side Counterbore)	Fixed hole position	-
MYR 253.60	1 Piece(s)	Available	14 Day(s)	295.31	2	20	Not Provided	47	20	HT (Reverse Threaded Hole)	Fixed hole position	-
MYR 247.22	1 Piece(s)	Available	14 Day(s)	295.31	2	20	Not Provided	47	20	N (No Hole Machining)	Fixed hole position	-
MYR 253.60	1 Piece(s)	Available	14 Day(s)	295.31	2	20	Not Provided	47	20	ST (Side Threaded Hole)	Fixed hole position	-
MYR 253.60	1 Piece(s)	Available	14 Day(s)	295.31	2	20	Not Provided	47	20	Z (Side Counterbore)	Fixed hole position	-
MYR 357.76	1 Piece(s)	Available	14 Day(s)	496.37	2	20	Not Provided	79	20	HT (Reverse Threaded Hole)	Fixed hole position	-
MYR 348.20	1 Piece(s)	Available	14 Day(s)	496.37	2	20	Not Provided	79	20	N (No Hole Machining)	Fixed hole position	-
MYR 357.76	1 Piece(s)	Available	14 Day(s)	496.37	2	20	Not Provided	79	20	ST (Side Threaded Hole)	Fixed hole position	-
MYR 357.76	1 Piece(s)	Available	14 Day(s)	496.37	2	20	Not Provided	79	20	Z (Side Counterbore)	Fixed hole position	-
MYR 1,009.50	1 Piece(s)	Available	14 Day(s)	997.4	2.5	25	Not Provided	127	25	HT (Reverse Threaded Hole)	Fixed hole position	-
MYR 990.36	1 Piece(s)	Available	14 Day(s)	997.4	2.5	25	Not Provided	127	25	N (No Hole Machining)	Fixed hole position	-
MYR 1,009.50	1 Piece(s)	Available	14 Day(s)	997.4	2.5	25	Not Provided	127	25	ST (Side Threaded Hole)	Fixed hole position	-
MYR 1,009.50	1 Piece(s)	Available	14 Day(s)	997.4	2.5	25	Not Provided	127	25	Z (Side Counterbore)	Fixed hole position	-
MYR 180.24	1 Piece(s)	Available	14 Day(s)	94.25	2.5	25	Not Provided	12	25	HT (Reverse Threaded Hole)	Fixed hole position	-
MYR 180.24	1 Piece(s)	Available	14 Day(s)	94.25	2.5	25	Not Provided	12	25	N (No Hole Machining)	Fixed hole position	-
MYR 180.24	1 Piece(s)	Available	14 Day(s)	94.25	2.5	25	Not Provided	12	25	ST (Side Threaded Hole)	Fixed hole position	-
MYR 180.24	1 Piece(s)	Available	14 Day(s)	94.25	2.5	25	Not Provided	12	25	Z (Side Counterbore)	Fixed hole position	-
MYR 382.74	1 Piece(s)	Available	14 Day(s)	298.45	2.5	25	Not Provided	38	25	HT (Reverse Threaded Hole)	Fixed hole position	-
MYR 376.34	1 Piece(s)	Available	14 Day(s)	298.45	2.5	25	Not Provided	38	25	N (No Hole Machining)	Fixed hole position	-
MYR 382.74	1 Piece(s)	Available	14 Day(s)	298.45	2.5	25	Not Provided	38	25	ST (Side Threaded Hole)	Fixed hole position	-
MYR 382.74	1 Piece(s)	Available	14 Day(s)	298.45	2.5	25	Not Provided	38	25	Z (Side Counterbore)	Fixed hole position	-
MYR 553.98	1 Piece(s)	Available	14 Day(s)	494.8	2.5	25	Not Provided	63	25	HT (Reverse Threaded Hole)	Fixed hole position	-
MYR 544.42	1 Piece(s)	Available	14 Day(s)	494.8	2.5	25	Not Provided	63	25	N (No Hole Machining)	Fixed hole position	-
MYR 553.98	1 Piece(s)	Available	14 Day(s)	494.8	2.5	25	Not Provided	63	25	ST (Side Threaded Hole)	Fixed hole position	-
MYR 553.98	1 Piece(s)	Available	14 Day(s)	494.8	2.5	25	Not Provided	63	25	Z (Side Counterbore)	Fixed hole position	-
MYR 1,074.98	1 Piece(s)	Available	14 Day(s)	999.02	3	30	Not Provided	106	30	HT (Reverse Threaded Hole)	Fixed hole position	-
MYR 1,055.88	1 Piece(s)	Available	14 Day(s)	999.02	3	30	Not Provided	106	30	N (No Hole Machining)	Fixed hole position	-
MYR 1,074.98	1 Piece(s)	Available	14 Day(s)	999.02	3	30	Not Provided	106	30	ST (Side Threaded Hole)	Fixed hole position	-
MYR 1,074.98	1 Piece(s)	Available	14 Day(s)	999.02	3	30	Not Provided	106	30	Z (Side Counterbore)	Fixed hole position	-
MYR 187.36	1 Piece(s)	Available	14 Day(s)	94.25	3	30	Not Provided	10	30	HT (Reverse Threaded Hole)	Fixed hole position	-
MYR 187.36	1 Piece(s)	Available	14 Day(s)	94.25	3	30	Not Provided	10	30	N (No Hole Machining)	Fixed hole position	-
MYR 187.36	1 Piece(s)	Available	14 Day(s)	94.25	3	30	Not Provided	10	30	ST (Side Threaded Hole)	Fixed hole position	-
MYR 187.36	1 Piece(s)	Available	14 Day(s)	94.25	3	30	Not Provided	10	30	Z (Side Counterbore)	Fixed hole position	-
MYR 403.50	1 Piece(s)	Available	14 Day(s)	292.17	3	30	Not Provided	31	30	HT (Reverse Threaded Hole)	Fixed hole position	-
MYR 397.12	1 Piece(s)	Available	14 Day(s)	292.17	3	30	Not Provided	31	30	N (No Hole Machining)	Fixed hole position	-
MYR 403.50	1 Piece(s)	Available	14 Day(s)	292.17	3	30	Not Provided	31	30	ST (Side Threaded Hole)	Fixed hole position	-
MYR 403.50	1 Piece(s)	Available	14 Day(s)	292.17	3	30	Not Provided	31	30	Z (Side Counterbore)	Fixed hole position	-
MYR 588.16	1 Piece(s)	Available	14 Day(s)	499.51	3	30	Not Provided	53	30	HT (Reverse Threaded Hole)	Fixed hole position	-
MYR 578.62	1 Piece(s)	Available	14 Day(s)	499.51	3	30	Not Provided	53	30	N (No Hole Machining)	Fixed hole position	-
MYR 588.16	1 Piece(s)	Available	14 Day(s)	499.51	3	30	Not Provided	53	30	ST (Side Threaded Hole)	Fixed hole position	-
MYR 588.16	1 Piece(s)	Available	14 Day(s)	499.51	3	30	Not Provided	53	30	Z (Side Counterbore)	Fixed hole position	-
-	1 Piece(s)		14 Day(s)	999.02	1	17	Black Oxide Coating	318	17	HT (Reverse Threaded Hole)	Designated hole position type	5 ～ 994
-	1 Piece(s)		14 Day(s)	999.02	1	17	Black Oxide Coating	318	17	ST (Side Threaded Hole)	Designated hole position type	5 ～ 994
-	1 Piece(s)		14 Day(s)	999.02	1	17	Black Oxide Coating	318	17	Z (Side Counterbore)	Designated hole position type	5 ～ 994
-	1 Piece(s)		14 Day(s)	94.25	1	17	Black Oxide Coating	30	17	HT (Reverse Threaded Hole)	Designated hole position type	5 ～ 89
-	1 Piece(s)		14 Day(s)	94.25	1	17	Black Oxide Coating	30	17	ST (Side Threaded Hole)	Designated hole position type	5 ～ 89
-	1 Piece(s)		14 Day(s)	94.25	1	17	Black Oxide Coating	30	17	Z (Side Counterbore)	Designated hole position type	5 ～ 89
-	1 Piece(s)		14 Day(s)	298.45	1	17	Black Oxide Coating	95	17	HT (Reverse Threaded Hole)	Designated hole position type	5 ～ 293
-	1 Piece(s)		14 Day(s)	298.45	1	17	Black Oxide Coating	95	17	ST (Side Threaded Hole)	Designated hole position type	5 ～ 293
-	1 Piece(s)		14 Day(s)	298.45	1	17	Black Oxide Coating	95	17	Z (Side Counterbore)	Designated hole position type	5 ～ 293
-	1 Piece(s)		14 Day(s)	499.51	1	17	Black Oxide Coating	159	17	HT (Reverse Threaded Hole)	Designated hole position type	5 ～ 494
-	1 Piece(s)		14 Day(s)	499.51	1	17	Black Oxide Coating	159	17	ST (Side Threaded Hole)	Designated hole position type	5 ～ 494
-	1 Piece(s)		14 Day(s)	499.51	1	17	Black Oxide Coating	159	17	Z (Side Counterbore)	Designated hole position type	5 ～ 494
-	1 Piece(s)		14 Day(s)	999.02	1.5	17	Black Oxide Coating	212	17	HT (Reverse Threaded Hole)	Designated hole position type	5 ～ 994
-	1 Piece(s)		14 Day(s)	999.02	1.5	17	Black Oxide Coating	212	17	ST (Side Threaded Hole)	Designated hole position type	5 ～ 994
-	1 Piece(s)		14 Day(s)	999.02	1.5	17	Black Oxide Coating	212	17	Z (Side Counterbore)	Designated hole position type	5 ～ 994
-	1 Piece(s)		14 Day(s)	98.96	1.5	17	Black Oxide Coating	21	17	HT (Reverse Threaded Hole)	Designated hole position type	5 ～ 93
-	1 Piece(s)		14 Day(s)	98.96	1.5	17	Black Oxide Coating	21	17	ST (Side Threaded Hole)	Designated hole position type	5 ～ 93
-	1 Piece(s)		14 Day(s)	98.96	1.5	17	Black Oxide Coating	21	17	Z (Side Counterbore)	Designated hole position type	5 ～ 93
-	1 Piece(s)		14 Day(s)	296.88	1.5	17	Black Oxide Coating	63	17	HT (Reverse Threaded Hole)	Designated hole position type	5 ～ 291
-	1 Piece(s)		14 Day(s)	296.88	1.5	17	Black Oxide Coating	63	17	ST (Side Threaded Hole)	Designated hole position type	5 ～ 291

Basic Information

Shape	Rack	End Machining	Both Ends Machined

Configure

280 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Total Length L(mm)
94.25

98.96

292.17

295.31

296.88

298.45

494.8

496.37

499.51

997.4

999.02
Clear
Module
1

1.5

2

2.5

3
Clear
Tooth Width W(mm)
10

15

17

20

24

25

29

30
Clear
Surface Treatment
- Not Provided
- Black Oxide Coating
Clear
Number of Effective Teeth(teeth)
10

12

15

21

30

31

38

47

53

63

79

95

106

127

159

212

318
Clear
Hole machining
- HT (Reverse Threaded Hole)
- N (No Hole Machining)
- ST (Side Threaded Hole)
- Z (Side Counterbore)
Clear
Style
- Designated hole position type
- Fixed hole position
Clear
Hole Position (1st) [ A ](mm)
[5-994/1mm Unit(s)]
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

14 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Tech Support

: Technical Inquiry

Economy Spur Gear Pressure Angle 20° Module 1.5	Economy Spur Gear Pressure Angle 20° Module 2.0	Economy Rack, High-Frequency Quenching / Square Cross-Section / Fixed L Size / Pressure Angle 20°
		Page under construction

How can we improve?

Square Rack, Pressure Angle 20°, Length Fixed (Part Numbers)

Part Number

Basic Information

Configure

Specification/Dimensions

Total Length L(mm)

Module

Tooth Width W(mm)

Surface Treatment

Number of Effective Teeth(teeth)

Hole machining

Style

Hole Position (1st) [ A ](mm)

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm