(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Polyurethane Round Belt Closed End, Welding Type
Part Number
Configured Part Number is shown.
Product Overview
A round belt is a rope-like belt with a circular cross section. Used in conjunction with pulleys and idler wheels, it is widely applied for conveying lightweight objects and for angle transmission purposes.
Easy installation—belts can be replaced without disassembling the machine, offering excellent maintainability.
Easy installation—belts can be replaced without disassembling the machine, offering excellent maintainability.
Dimensional Drawing
Specifications Overview
■Material Table
Fusion spliced products: the joint area may appear a bit rough, but it will reach the proper diameter after tension is applied during operation.
| Type | Shape | Color |  Material | Heat resistant temperature |
| E-MBT | Standard | Orange | Urethane | 50°C |
Fusion spliced products: the joint area may appear a bit rough, but it will reach the proper diameter after tension is applied during operation.Specification Table
| Part Number | L (Perimeter) Can be specified in 1 mm increments | Pulley Minimum P.D. | 5% Tension (N) | |
| Type | d | Standard | Standard | |
| E-MBT | 3 | 200 to 3000 | 20 | 4.1 |
| 4 | 200 to 4000 | 30 | 7.4 | |
| 5 | 200 to 5000 | 40 | 12.5 | |
| 6 | 200 to 6000 | 50 | 16.6 | |
| 8 | 200 to 6000 | 70 | 29.4 | |
| 10 | 250 to 6000 | 90 | 46.2 | |
Product Features
Usage Method
■ Simple Steps for Selecting Round Belts
(1) Determine the transmission power (or motor rated power)
(2) Confirm the diameter of the small pulley
(3) Calculate the tension borne by the belt
(4) Select a belt with allowable tension greater than the tension calculated in step (3)
(5) Finalize the belt selection
For details, please refer to
Steps for Selecting Round Belts
(1) Determine the transmission power (or motor rated power)
(2) Confirm the diameter of the small pulley
(3) Calculate the tension borne by the belt
(4) Select a belt with allowable tension greater than the tension calculated in step (3)
(5) Finalize the belt selection
For details, please refer to
Steps for Selecting Round BeltsPrecautions
■ Features of Economy Polyurethane Round Belt
· Physical Properties
· Tension
Test Conditions:
Temperature: (23±2)°C ; Relative Humidity: (50±10)%RH
Test method: Refer to ASTM D412-16(2021)
Test speed: 50 mm/min
Test sample: Diameter (d) 6 mm
*The tension value is the measured value of the test sample under test conditions and is not a guaranteed value. For reference only.
■Precautions for storage
①Avoid sunlight.
(2) Please store in a place protected from rain.
(3) Please store in a place with humidity below 80% and temperature between 0 to 40°C
(4) Do not stack in large quantities or bend forcibly.
⑤Do not place it directly on the ground.
(6) Do not make the belt contact with oil or chemicals.
· Physical Properties
| kgf=N×0.101972 | |||
| Item | Standard | Unit | E-MBT E-MBT-N |
| Hardness | ASTM D2240 | Shore A | 87 |
| 100%" | ASTM D412 | N/mm2 | 6.05 |
| 300%" | 16.9 | ||
| Tensile Strength | Above 24.5 | ||
| Elongation at Break | % | Above 400 |
· Tension
Test Conditions:
Temperature: (23±2)°C ; Relative Humidity: (50±10)%RH
Test method: Refer to ASTM D412-16(2021)
Test speed: 50 mm/min
Test sample: Diameter (d) 6 mm
*The tension value is the measured value of the test sample under test conditions and is not a guaranteed value. For reference only.
■Precautions for storage
①Avoid sunlight.
(2) Please store in a place protected from rain.
(3) Please store in a place with humidity below 80% and temperature between 0 to 40°C
(4) Do not stack in large quantities or bend forcibly.
⑤Do not place it directly on the ground.
(6) Do not make the belt contact with oil or chemicals.
Example of Use
For conveying lightweight objects and inclined angles
For easier understanding of the illustration, round belts are shown in green or light green. The color may differ from the actual product. Please note.
For easier understanding of the illustration, round belts are shown in green or light green. The color may differ from the actual product. Please note.Related Products
| Economy Type Polyurethane Round Belt Free End Product | (Economy series) Round belt pulley Clamping type | Economy Pulley for Round Belt, Screw-Fixed Type | ||
 |  |  | ||
| Typical model: E-MBT-N4-10 | Representative Model: E-MBRDC40-2.5-8 | Representative Model: E-MBRDFM40-2.5-C10 |
Related Documents
For selecting round belts, please refer to Round Belt Selection Method
Round Belt Selection MethodPart Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-MBT3-[200-3000/1] |
| E-MBT4-[200-4000/1] |
| E-MBT5-[200-5000/1] |
| E-MBT6-[200-6000/1] |
| E-MBT8-[200-6000/1] |
| E-MBT10-[250-6000/1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Belt Dia. d (Ø) | Pulley Min. P.D. (mm) | Belt Circumference L (mm) |
|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 9 Day(s) | 3 | 20 | 200 ～ 3000 | ||
- | 1 Piece(s) | 9 Day(s) | 4 | 30 | 200 ～ 4000 | ||
- | 1 Piece(s) | 9 Day(s) | 5 | 40 | 200 ～ 5000 | ||
- | 1 Piece(s) | 9 Day(s) | 6 | 50 | 200 ～ 6000 | ||
- | 1 Piece(s) | 9 Day(s) | 8 | 70 | 200 ～ 6000 | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 90 | 250 ～ 6000 |
Loading...
Basic Information
| Type | Standard | Color | Orange | Heat Resistance Temperature(°C) | 50 |
|---|---|---|---|---|---|
| Material | Polyurethane |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Polyurethane Round Belts-Seamless
- Pulleys for Round Belts - Clamping Type
- Polyurethane Round Belts-Welded Joint/Standard Type/High Tensile Strength Type/Antistatic Type
- Polyurethane Round Belts-Open End (Hollow Type)/Hollow Rope Type/Metal Joints for Hollow Ropes Joint Hardware
- Polyurethane Round Belts-Open End (Solid Type)/Standard Type/High Tensile Strength Type
- Polyurethane Round Belt Open End
- Star Rope
- RS18 standard rope sieve D/d = 18
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy