[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Bearings with Housings, Single Bearing, Standard Flange Type with Retainer Ring (Part Numbers)

Click this image to zoom it.

Move the mouse over the image to zoom

Volume Discount

Check FAQ of this product (5 items)

MISUMI

MiSUMi Economy

MISUMI

Part Number

Configured Part Number is shown.

Product Overview

It supports and fixes the bearing of the load carrying shaft. The bearing can be accurately and conveniently assembled onto the mechanism using the holder.

Dimensional Drawing

Bearing Precision:	GB/T 307.1 Grade 0
	Equivalent to JIS B 1514 Class 0

There is a gap between the bearing and the retaining ring. Please pay attention when selecting.

Perform threading and countersinking on the mounting hole so that installation can be done from both sides.

Material Table

Type			Material			Surface Treatment
Round	Square Type	Compact Type	Bearing	Holder	Retaining Ring	Holder
E-LBGRAB	E-LBGSAB	E-LBGCAB	Steel	S45C	Spring Steel	Black Oxide Film
E-LBGRA	E-LBGSA	E-LBGCA		S45C		Electroless Nickel Plating
E-LBARA	E-LBASA	E-LBACA		Aluminum		Clear Anodized
E-LSBARA	E-LSBASA	E-LSBACA	Stainless Steel	Aluminum	SUS304	Clear Anodized
E-LSBGRA	E-LSBGSA	E-LSBGCA	Stainless Steel	SUS304	SUS304	-

Alteration

Alterations	Without bearings, retaining rings
Code	NA
Spec.	Bearings and retaining rings are not installed in the housing, but are shipped as accessories.

Specification Table

Specifications & Dimensions Table

Part Number			d	D_H7		B	H	W	T	R₁	dh	P.C.D.	K	A	F	M (Coarse Thread) (d₂)	d₁	H₁
Type	Bearing Part Number	Bearing Cover Type	d	D_H7	Tolerance	B	H	W	T	R₁	dh	P.C.D.	K	A	F	M (Coarse Thread) (d₂)	d₁	H₁
Round E-LBGRAB E-LBGRA E-LBARA E-LSBARA E-LSBGRA Square E-LBGSAB E-LBGSA E-LBASA E-LSBASA E-LSBGSA Compact E-LBGCAB E-LBGCA E-LBACA E-LSBACA E-LSBGCA	623	ZZ Double Shield Type VV Non-contact Rubber Seal Ring DD Contact Rubber Seal Ring	3	10	+0.015 0	4	33	16	9	2	7	24	27	24	－	M4 (3.3)	6.5	3.4
	623		3	10	+0.015 0	4	33	16	9		7	24	27	24
	624		4	13	+0.018 0	5	35	18	10		9	26	28	26
	605		5	14		5	36	20	10		10	26	30	26		M5 (4.3)	8	4.4
	625		5	16		5	38	22	10		12	28	31	28
	606		6	17		6	39	23	11		13	29	32	29
	626		6	19	+0.021 0	6	41	25	11		15	31	34	31
	698		8	19		6	41	25	11		15	31	34	31
	608			22		7	45	29	12		18	35	36	35
	628			24		8	47	32	13		20	37	37	37
	6800		10	19		5	41	25	10		15	31	34	31
	6900			22		6	45	29	11		19	35	36	35
	6000			26		8	50	34	13		22	40	39	40
	6200			30		9	54	38	14		24	44	42	44
	6801		12	21		5	44	29	10		17	34	35	34
	6901			24		6	48	31	11		21	38	38	38
	6001			28		8	52	36	13		24	42	40	42
	6201			32	+0.025 0	10	56	40	15		26	46	43	46
	6201			32	+0.025 0	10	56	40	15		26	46	43	46
	6802		15	24	+0.021 0	5	47	32	10		20	37	37	37
	6902			28	+0.021 0	7	57	37	12		25	45	45	45		M6 (5.2)	9.5	5.4
	6002			32	+0.025 0	9	60	40	14		28	48	46	48
	6202			35	+0.025 0	11	64	44	17		29	52	49	52
	6903		17	30	+0.021 0	7	60	38	12		27	48	46	48
	6903			30	+0.021 0	7	60	38	12		27	48	46	48
	6003			35	+0.025 0	10	66	44	16		31	54	50	54
	6203			40		12	72	50	18		34	60	54	60
	6804		20	32		7	60	40	12		28	48	46	38	29
	6904			37		9	69	47	15		34	56	54	51	24	M8 (6.8)	11	6.5
	6004			42		12	77	54	18		36	64	59	56	32
	6204			47		14	81	58	20		40	68	62	59	34
	6805		25	37		7	69	47	13		34	56	54	51	24
	6905			42		9	77	54	15		36	64	59	56	32
	6005			47		12	88	58	18		41	72	67	63	36	M10 (8.5)	14	8.6
	6205			52	+0.030 0	15	94	64	22		45	78	72	68	39
	6205			52	+0.030 0	15	94	64	22		45	78	72	68	39
	6806		30	42	+0.025 0	7	77	54	13		36	64	59	56	32	M8 (6.8)	11	6.5
	6906			47	+0.025 0	9	88	58	15		41	72	67	63	36	M10 (8.5)	14	8.6
	6006			55	+0.030 0	13	96	66	20		48	80	73	70	40
	6206			62		16	104	74	23		55	88	79	77	44
	6007		35	62		14	104	74	21		55	88	79	75	44
	6207		35	72		17	126	88	26	3	64	105	95	92	51	M12 (10.5)	17.5	11
	6008		40	68		15	114	82	23	2	60	96	86	80	54	M10 (8.5)	14	8.6
	6208		40	80		18	134	96	27	3	74	113	102	98	56	M12 (10.5)	17.5	11
	6010	ZZ Double Shield Type	50	80		16	134	96	25	3	74	113	－	98	56
	6210			90	+0.035 0	20	147	110	31	4	83	126		104	72
	6210			90	+0.035 0	20	147	110	31	4	83	126		104	72

VV (non-contact rubber seal) is not applicable for bearings with model numbers 623, 624, 605, and 606.

Product Features

Feature 1: The round bearing housing assembly is suitable for locations requiring high-precision rotation.
Feature 2: The retaining ring in the bearing housing assembly with retaining ring prevents the bearing from falling out, making installation and use easier.
Feature 3: The end is inserted into a G7 precision hole on the mounting plate for positioning and installation, providing high repeatability in positioning during maintenance.
Feature 4: The single bearing type bearing housing assembly occupies less space and is suitable for areas with limited space.
Feature 5: The bearing housing assembly has high perpendicularity and coaxiality, making precise positioning easier during installation.

Usage Method

Mounting method of bearing housing set	Detailed explanation of installation
	When mounting standard bearing housing set, counterbored hole or thread hole are used so that they can be mounted from both sides.
	Accurate positioning can be achieved by aligning the machined holes with H7 tolerance on the mounting surface when the guided bearing housing set is installed.

Precautions

Precautions	Illustration and Reference
Anti-rust performance and maintenance of metal materials and surface treatment.	For detailed rust prevention performance and maintenance, please refer to the technical documentation.
Bearing accuracy for bearing housing assembly: GB/T 307.1 Class 0 (equivalent to JIS B 1514 Class 0) When selecting mating parts, please choose products with negative tolerance.	For detailed bearing specifications, please refer to the technical documentation.
When selecting, please note that axial clearance exists between the bearing and the retaining ring. Axial direction: The direction along the rotational central axis of cylinder, which is the same direction as the central axis. (Blue direction shown on the right) Radial direction: perpendicular to the axial direction, which is the radius or diameter direction of the end face circle of the cylinder. (Red direction shown on the right)
The retaining ring in the bearing housing set with retaining ring cannot be fastened axially, and it only plays a role in preventing the bearing from falling off. If you need to tighten the bearing axially, it is recommended to use a retaining ring, nut, etc. When choosing a fixing ring, nut, etc. for axial tightening, please take care to avoid the retaining ring. Please refer to the product specifications for retaining ring dimensions.

Example of Use

Equipment Name: Sliding Flip Mechanism
Feature 1: A mechanism that uses a pneumatic chuck to flip and transfer the held workpiece.
Feature 2: The bearing housing set is used in a simple cam shape, which can flip over the workpiece while sliding, thereby changing the direction of the workpiece.

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
E-LSBGSA6208ZZ
E-LSBGSA623ZZ
E-LSBGSA624ZZ
E-LSBGSA625ZZ
E-LSBGSA626ZZ
E-LSBGSA628ZZ
E-LSBGSA6800ZZ
E-LSBGSA6801ZZ
E-LSBGSA6802ZZ
E-LSBGSA6804ZZ
E-LSBGSA6805ZZ
E-LSBGSA6806ZZ
E-LSBGSA6900ZZ
E-LSBGSA6901ZZ
E-LSBGSA6902ZZ
E-LSBGSA6903ZZ
E-LSBGSA6904ZZ
E-LSBGSA6905ZZ
E-LSBGSA6906ZZ
E-LSBGSA698ZZ

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Bearing Inner Dia. d (mm)	Flange Shape 1	Bearing Material	Housing Material	Housing Surface Treatment	Bearing Part Number
MYR 337.80	1 Piece(s)	Available	13 Day(s)	40	Square Type	Stainless Steel	[SUS304] SUS304	Not Provided	6208
MYR 80.22	1 Piece(s)	Available	13 Day(s)	3	Square Type	Stainless Steel	[SUS304] SUS304	Not Provided	623
MYR 82.12	1 Piece(s)	Available	13 Day(s)	4	Square Type	Stainless Steel	[SUS304] SUS304	Not Provided	624
MYR 83.20	1 Piece(s)	Available	13 Day(s)	5	Square Type	Stainless Steel	[SUS304] SUS304	Not Provided	625
MYR 87.04	1 Piece(s)	Available	13 Day(s)	6	Square Type	Stainless Steel	[SUS304] SUS304	Not Provided	626
MYR 94.70	1 Piece(s)	Available	13 Day(s)	8	Square Type	Stainless Steel	[SUS304] SUS304	Not Provided	628
MYR 87.20	1 Piece(s)	Available	13 Day(s)	10	Square Type	Stainless Steel	[SUS304] SUS304	Not Provided	6800
MYR 91.18	1 Piece(s)	Available	13 Day(s)	12	Square Type	Stainless Steel	[SUS304] SUS304	Not Provided	6801
MYR 94.16	1 Piece(s)	Available	13 Day(s)	15	Square Type	Stainless Steel	[SUS304] SUS304	Not Provided	6802
MYR 107.44	1 Piece(s)	Available	13 Day(s)	20	Square Type	Stainless Steel	[SUS304] SUS304	Not Provided	6804
MYR 120.46	1 Piece(s)	Available	13 Day(s)	25	Square Type	Stainless Steel	[SUS304] SUS304	Not Provided	6805
MYR 131.90	1 Piece(s)	Available	13 Day(s)	30	Square Type	Stainless Steel	[SUS304] SUS304	Not Provided	6806
MYR 92.88	1 Piece(s)	Available	13 Day(s)	10	Square Type	Stainless Steel	[SUS304] SUS304	Not Provided	6900
MYR 95.76	1 Piece(s)	Available	13 Day(s)	12	Square Type	Stainless Steel	[SUS304] SUS304	Not Provided	6901
MYR 105.58	1 Piece(s)	Available	13 Day(s)	15	Square Type	Stainless Steel	[SUS304] SUS304	Not Provided	6902
MYR 106.66	1 Piece(s)	Available	13 Day(s)	17	Square Type	Stainless Steel	[SUS304] SUS304	Not Provided	6903
MYR 130.62	1 Piece(s)	Available	13 Day(s)	20	Square Type	Stainless Steel	[SUS304] SUS304	Not Provided	6904
MYR 134.96	1 Piece(s)	Available	13 Day(s)	25	Square Type	Stainless Steel	[SUS304] SUS304	Not Provided	6905
MYR 150.86	1 Piece(s)	Available	13 Day(s)	30	Square Type	Stainless Steel	[SUS304] SUS304	Not Provided	6906
MYR 87.04	1 Piece(s)	Available	13 Day(s)	8	Square Type	Stainless Steel	[SUS304] SUS304	Not Provided	698

Basic Information

Shape	Flanged	Bearing Used	Deep Groove Ball Bearing	Number of Bearings	Single
Retaining Ring	Provided	Type	Bearing with Housings	Seal	ZZ (Double Shield)

Configure

200 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Bearing Inner Dia. d(mm)
3

4

5

6

8

10

12

15

17

20

25

30

35

40

50
Clear
Bearing Material
- Steel
  - Steel
- Stainless Steel
Clear
Housing Material
- S45C
  - S45C
- SUS304
  - SUS304
- A2017
  - Aluminum Alloy
Clear
Housing Surface Treatment
- Black Oxide
- Electroless Nickel Plating
- Clear Anodize Processing
- Not Provided
Clear
Bearing Part Number
605

606

608

623

624

625

626

628

698

6000

6001

6002

6003

6004

6005

6006

6007

6008

6010

6200

6201

6202

6203

6204

6205

6206

6207

6208

6210

6800

6801

6802

6804

6805

6806

6900

6901

6902

6903

6904

6905

6906
Clear
type
- E-LBACA
- E-LBARA
- E-LBASA
- E-LBGCA
- E-LBGCAB
- E-LBGRA
- E-LBGRAB
- E-LBGSA
- E-LBGSAB
- E-LSBACA
- E-LSBARA
- E-LSBASA
- E-LSBGCA
- E-LSBGRA
- E-LSBGSA
Clear
Flange Shape 1
- Round Type
- Square Type
- Compact
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

13 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: What is the bearing housing set?: Answer: It supports and fixes the bearing of the load carrying shaft. The bearing can be accurately and simply assembled onto the mechanism using the holder.
Question: What do radial load and axial load mean?: Answer: The load applied to the shaft along the perpendicular direction of the shaft center line - radial load.
The load applied to the shaft along the horizontal direction of the shaft center line - axial load (thrust load).
Question: After the rotating shaft is assembled with the bearing housing set, there is obvious axial movement. How to solve the problem?: Answer: If you need to tighten the bearing axially, it is recommended to use a retaining ring, nut, etc. Please refer to the installation method.
When choosing a fixing ring, nut, etc. for axial tightening, please take care to avoid the retaining ring. For ring dimensions, please refer to the product specifications.
Question: For high-load service conditions, which type of bearing housing set is a better choice?: Answer: Double bearing type bearing housing set is suitable for heavy load operating environment, and keep fixed for transmission products such as rotating shaft.
Question: What tolerance should be selected for shaft parts used with bearing housing set?: Answer: It is recommended to choose MISUMI brand rotating shafts with g6 tolerance.