(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Bearings with Housings, Single Bearing, Standard Flange Type without Retainer Ring
- Volume Discount
Part Number
Configured Part Number is shown.
It supports and fixes the bearing of the load carrying shaft. The bearing can be accurately and conveniently assembled onto the mechanism using the holder.
For the type without a retaining ring, since dimension B has a negative tolerance, the bearing may protrude by 0.1 to 0.2 mm Bearings without a retaining ring may fall out, but can be used normally after reinstallation Threading and countersinking the mounting hole allows installation from both sides| Type |  Material |  Surface Treatment | |||
| Round | Square Type | Compact Type | Bearing | Holder | Holder |
| E-LBGRNB | E-LBGSNB | E-LBGCNB | Steel | S45C | Black Oxide Film |
| E-LBGRN | E-LBGSN | E-LBGCN | Electroless Nickel Plating | ||
| E-LBARN | E-LBASN | E-LBACN | Aluminum | Clear Anodized | |
| E-LSBARN | E-LSBASN | E-LSBACN | Stainless Steel | ||
| E-LSBGRN | E-LSBGSN | E-LSBGCN | SUS304 | - | |
| Alterations | Without bearings, retaining rings | ||||||
| Code | NA | ||||||
| Spec. | Bearings and retaining rings are not installed in the housing, but are shipped as accessories. | ||||||
Specifications & Dimensions Table
| Part Number | d | DH7 | B | H | W | T | dh | P.C.D. | K | A | F | M (Coarse Thread) (d2) | d1 | H1 | |||
| Type | Bearing Part Number | Bearing Cover Type | Tolerance | ||||||||||||||
| Round E-LBGRNB E-LBGRN E-LBARN E-LSBARN E-LSBGRN Square E-LBGSNB E-LBGSN E-LBASN E-LSBASN E-LSBGSN Compact E-LBGCNB E-LBGCN E-LBACN E-LSBACN E-LSBGCN | 623 | ZZ Double Shield Type VV Non-contact Rubber Seal DD Contact Rubber Seal Ring | 3 | 10 | +0.015 0 | 4 | 33 | 16 | 6 | 7 | 24 | 27 | 24 | - | M4 (3.3) | 6.5 | 3.4 |
| 624 | 4 | 13 | +0.018 0 | 5 | 35 | 18 | 7 | 9 | 26 | 28 | 26 | ||||||
| 605 | 5 | 14 | 5 | 36 | 20 | 7 | 10 | 26 | 30 | 26 | M5 (4.3) | 8 | 4.4 | ||||
| 625 | 16 | 5 | 38 | 22 | 7 | 12 | 28 | 31 | 28 | ||||||||
| 606 | 6 | 17 | 6 | 39 | 23 | 8 | 13 | 29 | 32 | 29 | |||||||
| 626 | 19 | +0.021 0 | 6 | 41 | 25 | 8 | 15 | 31 | 34 | 31 | |||||||
| 678 | 8 | 12 | +0.018 0 | 3.5 | 34 | 18 | 6 | 10 | 25 | 27 | 25 | M4 (3.3) | 6.5 | 3.4 | |||
| 698 | 19 | +0.021 0 | 6 | 41 | 25 | 8 | 15 | 31 | 34 | 31 | M5 (4.3) | 8 | 4.4 | ||||
| 608 | 22 | 7 | 45 | 29 | 9 | 18 | 35 | 36 | 35 | ||||||||
| 628 | 24 | 8 | 47 | 32 | 10 | 20 | 37 | 37 | 37 | ||||||||
| 6700 | 10 | 15 | +0.018 0 | 4 | 37 | 22 | 7.5 | 12 | 27 | 30 | 27 | ||||||
| 6800 | 19 | +0.021 0 | 5 | 41 | 25 | 7.5 | 15 | 31 | 34 | 31 | |||||||
| 6900 | 22 | 6 | 45 | 29 | 8 | 19 | 35 | 36 | 35 | ||||||||
| 6000 | 26 | 8 | 50 | 34 | 10 | 22 | 40 | 39 | 40 | ||||||||
| 6200 | 30 | 9 | 54 | 38 | 11 | 24 | 44 | 42 | 44 | ||||||||
| 6701 | 12 | 18 | +0.018 0 | 4 | 40 | 25 | 7.5 | 15 | 30 | 31 | 30 | ||||||
| 6801 | 21 | +0.021 0 | 5 | 44 | 29 | 7.5 | 17 | 34 | 35 | 34 | |||||||
| 6901 | 24 | 6 | 48 | 31 | 8 | 21 | 38 | 38 | 38 | ||||||||
| 6001 | 28 | 8 | 52 | 36 | 10 | 24 | 42 | 40 | 42 | ||||||||
| 6201 | 32 | +0.025 0 | 10 | 56 | 40 | 12 | 26 | 46 | 43 | 46 | |||||||
| 6702 | 15 | 21 | +0.021 0 | 4 | 44 | 29 | 7.5 | 18 | 34 | 35 | 34 | ||||||
| 6802 | 24 | 5 | 47 | 32 | 7.5 | 20 | 37 | 37 | 37 | ||||||||
| 6902 | 28 | 7 | 57 | 37 | 9 | 25 | 45 | 45 | 45 | M6 (5.2) | 9.5 | 5.4 | |||||
| 6002 | 32 | +0.025 0 | 9 | 60 | 40 | 11 | 28 | 48 | 46 | 48 | |||||||
| 6202 | 35 | 11 | 64 | 44 | 13 | 29 | 52 | 49 | 52 | ||||||||
| 6803 | 17 | 26 | +0.021 0 | 5 | 50 | 34 | 7.5 | 22 | 40 | 39 | 40 | M5 (4.3) | 8 | 4.4 | |||
| 6903 | 30 | 7 | 60 | 38 | 9 | 27 | 48 | 46 | 48 | M6 (5.2) | 9.5 | 5.4 | |||||
| 6003 | 35 | +0.025 0 | 10 | 66 | 44 | 12 | 31 | 54 | 50 | 54 | |||||||
| 6203 | 40 | 12 | 72 | 50 | 14 | 34 | 60 | 54 | 60 | ||||||||
| 6704 | 20 | 27 | +0.021 0 | 4 | 51 | 35 | 7.5 | 23 | 41 | 39 | 32 | 25 | M5 (4.3) | 8 | 4.4 | ||
| 6804 | 32 | +0.025 0 | 7 | 60 | 40 | 9 | 28 | 48 | 46 | 38 | 29 | M6 (5.2) | 9.5 | 5.4 | |||
| 6904 | 37 | 9 | 69 | 47 | 11 | 34 | 56 | 54 | 51 | 24 | M8 (6.8) | 11 | 6.5 | ||||
| 6004 | 42 | 12 | 77 | 54 | 14 | 36 | 64 | 59 | 56 | 32 | |||||||
| 6204 | 47 | 14 | 81 | 58 | 16 | 40 | 68 | 62 | 59 | 34 | |||||||
| 6805 | 25 | 37 | 7 | 69 | 47 | 11 | 34 | 56 | 54 | 51 | 24 | ||||||
| 6905 | 42 | 9 | 77 | 54 | 11 | 36 | 64 | 59 | 56 | 32 | |||||||
| 6005 | 47 | 12 | 88 | 58 | 14 | 41 | 72 | 67 | 63 | 36 | M10 (8.5) | 14 | 8.6 | ||||
| 6205 | 52 | +0.030 0 | 15 | 94 | 64 | 17 | 45 | 78 | 72 | 68 | 39 | ||||||
| 6806 | 30 | 42 | +0.025 0 | 7 | 77 | 54 | 11 | 36 | 64 | 59 | 56 | 32 | M8 (6.8) | 11 | 6.5 | ||
| 6906 | 47 | 9 | 88 | 58 | 13 | 41 | 72 | 67 | 63 | 36 | M10 (8.5) | 14 | 8.6 | ||||
| 6006 | 55 | +0.030 0 | 13 | 96 | 66 | 15 | 48 | 80 | 73 | 70 | 40 | ||||||
| 6206 | 62 | 16 | 104 | 74 | 18 | 55 | 88 | 79 | 77 | 44 | |||||||
| 6007 | 35 | 14 | 16 | 75 | |||||||||||||
| 6207 | 72 | 17 | 126 | 88 | 21 | 64 | 105 | 95 | 92 | 51 | M12 (10.5) | 17.5 | 11 | ||||
| 6008 | 40 | 68 | 15 | 114 | 82 | 17 | 60 | 96 | 86 | 80 | 54 | M10 (8.5) | 14 | 8.6 | |||
| 6208 | 80 | 18 | 134 | 96 | 22 | 74 | 113 | 102 | 98 | 56 | M12 (10.5) | 17.5 | 11 | ||||
| 6010 | ZZ Double Shield Type | 50 | 16 | 20 | - | ||||||||||||
| 6210 | 90 | +0.035 0 | 20 | 147 | 110 | 24 | 83 | 126 | 104 | 72 | |||||||
VV (non-contact rubber seal) is not applicable for bearings with model numbers 623, 624, 605, and 606.Feature 1: The round bearing housing assembly is suitable for locations requiring high-precision rotation.
Feature 2: The end is inserted into a G7 precision hole on the fixed plate for positioning and installation, providing high repeatability in positioning during maintenance.
Feature 3: The single bearing type bearing housing assembly occupies less space and is suitable for areas with limited space.
Feature 4: The bearing housing assembly has high perpendicularity and coaxiality, making precise positioning during installation easier.
| Mounting method of bearing housing set | Detailed explanation of installation |
 | When mounting standard bearing housing set, counterbored hole or thread hole are used so that they can be mounted from both sides. |
 | Accurate positioning can be achieved by aligning the machined holes with H7 tolerance on the mounting surface when the guided bearing housing set is installed. |
| Precautions | Illustration and Reference |
| Anti-rust performance and maintenance of metal materials and surface treatment. | For detailed rust prevention performance and maintenance, please refer to the technical documentation. |
| Bearing accuracy for bearing housing assembly: GB/T 307.1 Class 0 (equivalent to JIS B 1514 Class 0) When selecting mating parts, please choose products with negative tolerance. | For detailed bearing specifications, please refer to the technical documentation. |
| When selecting, please note that axial clearance exists between the bearing and the retaining ring. Axial direction: The direction along the rotational central axis of cylinder, which is the same direction as the central axis. (Blue direction shown on the right) Radial direction: perpendicular to the axial direction, which is the radius or diameter direction of the end face circle of the cylinder. (Red direction shown on the right) |  |
| The retaining ring in the bearing housing set with retaining ring cannot be fastened axially, and it only plays a role in preventing the bearing from falling off. If you need to tighten the bearing axially, it is recommended to use a retaining ring, nut, etc. When choosing a fixing ring, nut, etc. for axial tightening, please take care to avoid the retaining ring. Please refer to the product specifications for retaining ring dimensions. |  |
Feature 1: A mechanism that uses a pneumatic chuck to flip and transfer the held workpiece.
Feature 2: The bearing housing set is used in a simple cam shape, which can flip over the workpiece while sliding, thereby changing the direction of the workpiece.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| E-LBACN6000ZZ |
| E-LBACN6001ZZ |
| E-LBACN6002ZZ |
| E-LBACN6003ZZ |
| E-LBACN6004ZZ |
| E-LBACN6005ZZ |
| E-LBACN6006ZZ |
| E-LBACN6007ZZ |
| E-LBACN6008ZZ |
| E-LBACN6010ZZ |
| E-LBACN605ZZ |
| E-LBACN606ZZ |
| E-LBACN608ZZ |
| E-LBACN6200ZZ |
| E-LBACN6201ZZ |
| E-LBACN6202ZZ |
| E-LBACN6203ZZ |
| E-LBACN6204ZZ |
| E-LBACN6205ZZ |
| E-LBACN6206ZZ |
| E-LBACN6207ZZ |
| E-LBACN6208ZZ |
| E-LBACN6210ZZ |
| E-LBACN623ZZ |
| E-LBACN624ZZ |
| E-LBACN625ZZ |
| E-LBACN626ZZ |
| E-LBACN628ZZ |
| E-LBACN6700ZZ |
| E-LBACN6701ZZ |
| E-LBACN6702ZZ |
| E-LBACN6704ZZ |
| E-LBACN678ZZ |
| E-LBACN6800ZZ |
| E-LBACN6801ZZ |
| E-LBACN6802ZZ |
| E-LBACN6803ZZ |
| E-LBACN6804ZZ |
| E-LBACN6805ZZ |
| E-LBACN6806ZZ |
| E-LBACN6900ZZ |
| E-LBACN6901ZZ |
| E-LBACN6902ZZ |
| E-LBACN6903ZZ |
| E-LBACN6904ZZ |
| E-LBACN6905ZZ |
| E-LBACN6906ZZ |
| E-LBACN698ZZ |
| E-LBARN6000ZZ |
| E-LBARN6001ZZ |
| E-LBARN6002ZZ |
| E-LBARN6003ZZ |
| E-LBARN6004ZZ |
| E-LBARN6005ZZ |
| E-LBARN6006ZZ |
| E-LBARN6007ZZ |
| E-LBARN6008ZZ |
| E-LBARN6010ZZ |
| E-LBARN605ZZ |
| E-LBARN606ZZ |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Bearing Inner Dia. d (mm) | Flange Shape 1 | Bearing Material | Housing Material | Housing Surface Treatment | Bearing Part Number |
|---|---|---|---|---|---|---|---|---|---|---|
MYR 69.10 | 1 Piece(s) | Available | 13 Day(s) | 10 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6000 | |
MYR 69.98 | 1 Piece(s) | Available | 13 Day(s) | 12 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6001 | |
MYR 73.10 | 1 Piece(s) | Available | 13 Day(s) | 15 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6002 | |
MYR 76.72 | 1 Piece(s) | Available | 13 Day(s) | 17 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6003 | |
MYR 85.88 | 1 Piece(s) | Available | 13 Day(s) | 20 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6004 | |
MYR 92.32 | 1 Piece(s) | Available | 13 Day(s) | 25 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6005 | |
MYR 100.06 | 1 Piece(s) | Available | 13 Day(s) | 30 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6006 | |
MYR 106.68 | 1 Piece(s) | Available | 13 Day(s) | 35 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6007 | |
MYR 116.90 | 1 Piece(s) | Available | 13 Day(s) | 40 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6008 | |
MYR 147.64 | 1 Piece(s) | Available | 13 Day(s) | 50 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6010 | |
MYR 64.04 | 1 Piece(s) | Available | 13 Day(s) | 5 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 605 | |
MYR 64.94 | 1 Piece(s) | Available | 13 Day(s) | 6 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 606 | |
MYR 66.34 | 1 Piece(s) | Available | 13 Day(s) | 8 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 608 | |
MYR 71.44 | 1 Piece(s) | Available | 13 Day(s) | 10 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6200 | |
MYR 72.94 | 1 Piece(s) | Available | 13 Day(s) | 12 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6201 | |
MYR 76.72 | 1 Piece(s) | Available | 13 Day(s) | 15 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6202 | |
MYR 82.66 | 1 Piece(s) | Available | 13 Day(s) | 17 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6203 | |
MYR 92.38 | 1 Piece(s) | Available | 13 Day(s) | 20 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6204 | |
MYR 102.74 | 1 Piece(s) | Available | 13 Day(s) | 25 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6205 | |
MYR 112.50 | 1 Piece(s) | Available | 13 Day(s) | 30 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6206 | |
MYR 144.72 | 1 Piece(s) | Available | 13 Day(s) | 35 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6207 | |
MYR 158.84 | 1 Piece(s) | Available | 13 Day(s) | 40 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6208 | |
MYR 184.84 | 1 Piece(s) | Available | 13 Day(s) | 50 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6210 | |
MYR 63.54 | 1 Piece(s) | Available | 13 Day(s) | 3 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 623 | |
MYR 63.92 | 1 Piece(s) | Available | 13 Day(s) | 4 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 624 | |
MYR 64.20 | 1 Piece(s) | Available | 13 Day(s) | 5 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 625 | |
MYR 65.20 | 1 Piece(s) | Available | 13 Day(s) | 6 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 626 | |
MYR 68.10 | 1 Piece(s) | Available | 13 Day(s) | 8 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 628 | |
MYR 65.92 | 1 Piece(s) | Available | 13 Day(s) | 10 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6700 | |
MYR 66.64 | 1 Piece(s) | Available | 13 Day(s) | 12 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6701 | |
MYR 67.82 | 1 Piece(s) | Available | 13 Day(s) | 15 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6702 | |
MYR 71.72 | 1 Piece(s) | Available | 13 Day(s) | 20 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6704 | |
MYR 64.48 | 1 Piece(s) | Available | 13 Day(s) | 8 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 678 | |
MYR 65.16 | 1 Piece(s) | Available | 13 Day(s) | 10 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6800 | |
MYR 65.80 | 1 Piece(s) | Available | 13 Day(s) | 12 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6801 | |
MYR 66.58 | 1 Piece(s) | Available | 13 Day(s) | 15 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6802 | |
MYR 68.00 | 1 Piece(s) | Available | 13 Day(s) | 17 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6803 | |
MYR 71.98 | 1 Piece(s) | Available | 13 Day(s) | 20 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6804 | |
MYR 76.88 | 1 Piece(s) | Available | 13 Day(s) | 25 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6805 | |
MYR 80.44 | 1 Piece(s) | Available | 13 Day(s) | 30 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6806 | |
MYR 66.28 | 1 Piece(s) | Available | 13 Day(s) | 10 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6900 | |
MYR 67.08 | 1 Piece(s) | Available | 13 Day(s) | 12 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6901 | |
MYR 69.84 | 1 Piece(s) | Available | 13 Day(s) | 15 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6902 | |
MYR 70.80 | 1 Piece(s) | Available | 13 Day(s) | 17 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6903 | |
MYR 77.30 | 1 Piece(s) | Available | 13 Day(s) | 20 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6904 | |
MYR 81.36 | 1 Piece(s) | Available | 13 Day(s) | 25 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6905 | |
MYR 88.14 | 1 Piece(s) | Available | 13 Day(s) | 30 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6906 | |
MYR 65.32 | 1 Piece(s) | Available | 13 Day(s) | 8 | Compact | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 698 | |
MYR 69.46 | 1 Piece(s) | Available | 13 Day(s) | 10 | Round Type | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6000 | |
MYR 70.30 | 1 Piece(s) | Available | 13 Day(s) | 12 | Round Type | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6001 | |
MYR 73.78 | 1 Piece(s) | Available | 13 Day(s) | 15 | Round Type | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6002 | |
MYR 77.84 | 1 Piece(s) | Available | 13 Day(s) | 17 | Round Type | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6003 | |
MYR 85.84 | 1 Piece(s) | Available | 13 Day(s) | 20 | Round Type | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6004 | |
MYR 93.10 | 1 Piece(s) | Available | 13 Day(s) | 25 | Round Type | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6005 | |
MYR 101.14 | 1 Piece(s) | Available | 13 Day(s) | 30 | Round Type | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6006 | |
MYR 108.04 | 1 Piece(s) | Available | 13 Day(s) | 35 | Round Type | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6007 | |
MYR 118.88 | 1 Piece(s) | Available | 13 Day(s) | 40 | Round Type | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6008 | |
MYR 151.92 | 1 Piece(s) | Available | 13 Day(s) | 50 | Round Type | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 6010 | |
MYR 63.90 | 1 Piece(s) | Available | 13 Day(s) | 5 | Round Type | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 605 | |
MYR 64.96 | 1 Piece(s) | Available | 13 Day(s) | 6 | Round Type | [Steel] Steel | [A2017] Aluminum Alloy | Clear Anodize Processing | 606 |
Loading...
Basic Information
| Shape | Flanged | Bearing Used | Deep Groove Ball Bearing | Number of Bearings | Single |
|---|---|---|---|---|---|
| Retaining Ring | Not Provided | Type | Bearing with Housings | Seal | ZZ (Double Shield) |
Specification/Dimensions
-
Bearing Inner Dia. d(mm)
-
Flange Shape 1
- Round Type
- Square Type
- Compact
-
Bearing Material
- Steel
- Stainless Steel
- Steel
-
Housing Material
- S45C
- SUS304
- A2017
- S45C
-
Housing Surface Treatment
- Black Oxide
- Electroless Nickel Plating
- Clear Anodize Processing
- Not Provided
-
Bearing Part Number
-
type
- E-LBACN
- E-LBARN
- E-LBASN
- E-LBGCN
- E-LBGCNB
- E-LBGRN
- E-LBGRNB
- E-LBGSN
- E-LBGSNB
- E-LSBACN
- E-LSBARN
- E-LSBASN
- E-LSBGCN
- E-LSBGRN
- E-LSBGSN
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 13 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: What is the bearing housing set?
- Answer: It supports and fixes the bearing of the load carrying shaft. The bearing can be accurately and simply assembled onto the mechanism using the holder.
- Question: What do radial load and axial load mean?
-
Answer:
The load applied to the shaft along the perpendicular direction of the shaft center line - radial load.
The load applied to the shaft along the horizontal direction of the shaft center line - axial load (thrust load). - Question: After the rotating shaft is assembled with the bearing housing set, there is obvious axial movement. How to solve the problem?
-
Answer:
If you need to tighten the bearing axially, it is recommended to use a retaining ring, nut, etc. Please refer to the installation method.
When choosing a fixing ring, nut, etc. for axial tightening, please take care to avoid the retaining ring. For ring dimensions, please refer to the product specifications. - Question: For high-load service service conditions, which type of bearing housing set is a better choice?
- Answer: Double bearing type bearing housing set is suitable for heavy load operating environment, and keep fixed for transmission products such as rotating shaft.
- Question: What tolerance should be selected for shaft parts used with bearing housing set?
- Answer: It is recommended to choose MISUMI brand rotating shafts with g6 tolerance.
Additional Products in this Category
- Bearings with Housings - Double Bearings with Pilot, Non-Retained, L Selectable
- Bearings with Housings - Double Bearings with Pilot, Non-Retained, L Configurable
- Bearings with Housings, Double Bearing, Compact Flange Type, Outer Ring Captured
- Bearings with Housings, Double Bearing, Pilot Type, without Retainer Ring
- Bearing Holder Set Directly mounted type Square shape (Stainless steel) BSS
- Bearing Holder Set Directly mounted type Ellipse shape (Stainless steel) BES
- Bearing Housing Set Retaining Ring Type Elliptical BERM
- Bearing Housing Set, Pilot Retaining Ring Type Elliptical Type BEIM
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy