(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Bearings with Housings, Triple Bearing, Pilot Type, Outer Ring Captured (E-LABGYB7009-S-225)

Volume Discount

Check FAQ of this product (5 items)

MISUMI

MiSUMi Economy

MISUMI

Part Number

Configured Part Number is shown.

E-LABGYB7009-S-225

Product Overview

It supports and fixes the bearing of the load carrying shaft. The bearing can be accurately and conveniently assembled onto the mechanism using the holder.

Dimensional Drawing

Bearing Precision:	(Radial Bearing) GB/T 307.1 Grade 4, equivalent to JIS B1514 Grade 4
	(Deep Groove Ball Bearing) GB/T 307.1 Class 0, equivalent to JIS B 1514 Class 0

When delivered, the parts of the radial bearing unit are not assembled into the housing body

Please secure the outer ring of the radial bearing unit with a dedicated cover plate, and fasten the inner ring with a bearing locknut or similar before use

There is an approximately 1 mm gap on both the left and right sides of the housing on the deep groove ball bearing side, so the inner ring can be secured without adjusting the length of the inner ring spacer

The deep groove ball bearing side (5) comes with a standard cover plate
On the radial side (6), you can choose one from the N standard cover plate, S oil seal cover plate, or R O-ring cover plate

The oil seal cover plate and O-ring cover plate do not include the shaft collar (7)

Contact with the O-ring may apply torque

Material Table

Type	(1) Radial Bearing (Back Combination Type) (2) Deep Groove Ball Bearing	(3) Fixed Seat (4) Adjustment Ring for Inner Ring (5) Standard Cover Plate (6) Standard Cover Plate·Cover Plate for Oil Seal·Cover Plate for O-Ring (7) Collar for Fixing Inner Ring		(8) Cover Plate Fixing Bolt


	Material	Material	Surface Treatment	Material	Surface Treatment
E-LABGYB	Steel	S45C	Black Oxide Film	SCM435	Black Oxide Film
E-LABGY			Electroless Nickel Plating	SUS304	-

Specification Table

Specifications & Dimensions Table

Part Number		(6) Cover Plate	L	S	d	D_H7		B	b₁	b₂	Deep groove ball bearing Model	H	D₂	T	dh	E	D_1 g6		P.C.D.	d₁	d₂	H₁
Type	Bearing Part Number	Selection					Tolerance											Tolerance
E-LABGYB E-LABGY	7002	N Standard Cover S Oil Seal Cover R O-Ring Cover	60 65 70 75	10	15	32	+0.025 0	9	13	20	6002ZZ	75	48	12	28	18	50	-0.009 -0.025	62	11	6.5	6.5
	7003		70 75 80 85		17	35		10	14	22	6003ZZ				31
	7004		80 90 100	15	20	42		12	16	26	6004ZZ	92	58	15	36	22	60	-0.010 -0.029	75	14	9.2	8.5
	7005		100 110 125		25	47					6005ZZ	98	63		41		65		80
	7006		120 130 150		30	55	+0.030 0	13	17	28	6006ZZ	120	78	18	48	27	80		98	17.5	11.2	10.5
	7007		140 150 175		35	62		14	18	30	6007ZZ	126	84		55		86	-0.012 -0.034	106
	7008		160 180 200	20	40	68		15	19	32	6008ZZ	140	92	20	60	30	95		116
	7009		180 200 225		45	75		16	20	34	6009ZZ	145	98		69		100		122
	7010		200 220 250		50	80					6010ZZ	147	101		74		105		124

No.	(5) (6) Cover Plate Details									(6) Cover Plate Details										(8) Cover Plate
	D	D₂	dh	T₁	T₂	p.c.d.	d₃	d₄	t₂	N Standard Cover Plate	S Oil Seal Cover Plate				Cover Plate for R O-Ring					Fixing Bolt
										d₅	S₁	S₂	St	Accessories	Ra	Rb	Rt	r	Accessories
														Oil Seal					O-Ring
7002	32	48	28	6	8	40	6.5	3.5	3.1	21	32	22	5	G20325	24	20	3.2	0.4	P20	M3-8
7003	35		31
7004	42	58	36	7	9	48	8	4.5	4.1	26	35	27	6	D25356	31	25	4.7	0.7	P25	M4-10
7005	47	63	41	8	10	53				31	40	32	7	D30407	36	30			P30
7006	55	78	48			64	9.5	5.5	5.1	41	50	42	6.5	D40506.5	41	35			P35	M5-12
7007	62	84	55	9	11	72				46	60	47	9	D45609	46	40			P40
7008	68	92	60			78	11	6.6	6.1	51	65	52		D50659	51	45			P45	M6-12
7009	75	98	69			85				56	70	57		D55709	56	50			P50
7010	80	101	74	11	13	88				61	75	62		D60759	70	60	7.5	0.8	P60	M6-15

No.	(7) Fixed Shaft Collar Details			(4) Inner Ring Adjustment Ring Details
No.	Outer Diameter	Internal Diameter	Thickness	Outer Diameter	Internal Diameter	Thickness (ℓ)
7002	20	15	8.5	20	15	L-32
7003	20	17	8.5	20	17	L-35
7004	25	20	9.5	25	20	L-41
7005	30	25	10.5	30	25	L-41
7006	40	30		40	30	L-44
7007	45	35		45	35	L-47
7008	50	40	11.5	50	40	L-50
7009	55	45	11.5	55	45	L-53
7010	60	50	13.5	60	50	L-53

Product Features

Feature 1: The round bearing housing assembly is suitable for locations requiring high-precision rotation.
Feature 2: Compared with the single bearing type, the triple bearing type bearing housing set is more suitable for heavy load operating environments, and keeps transmission products such as rotating shafts fixed.
Feature 3: The three-bearing type bearing housing assembly is very convenient for cantilever support.
Feature 4: The bearing housing assembly has high perpendicularity and coaxiality, making precise positioning during installation easier.
Feature 5: The outer ring fixed type of the radial bearing housing assembly is equipped with an outer ring fixing cover as standard, which prevents the bearing outer ring from moving in the thrust direction.

Precautions

Precautions	Illustration and Reference
Anti-rust performance and maintenance of metal materials and surface treatment.	For detailed rust prevention performance and maintenance, please refer to the technical documentation.
Bearing accuracy for bearing housing assembly: GB/T 307.1 Class 0 (equivalent to JIS B 1514 Class 0) When selecting mating parts, please choose products with negative tolerance.	For detailed bearing specifications, please refer to the technical documentation.
When selecting, please note that axial clearance exists between the bearing and the retaining ring. Axial direction: The direction along the rotational central axis of cylinder, which is the same direction as the central axis. (Blue direction shown on the right) Radial direction: perpendicular to the axial direction, which is the radius or diameter direction of the end face circle of the cylinder. (Red direction shown on the right)
The retaining ring in the bearing housing set with retaining ring cannot be fastened axially, and it only plays a role in preventing the bearing from falling off. If you need to tighten the bearing axially, it is recommended to use a retaining ring, nut, etc. When choosing a fixing ring, nut, etc. for axial tightening, please take care to avoid the retaining ring. Please refer to the product specifications for retaining ring dimensions.

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
E-LABGYB7009-S-225

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Bearing Inner Dia. d (mm)	Housing Surface Treatment	Length L (mm)	Bearing Part Number	Cover Type
	MYR 1,197.41	1 Piece(s)	Available	13 Day(s)	45	Black Oxide	225	7009	Oil Seal Cover

Basic Information

Shape	Flanged, Pilot	Bearing Used	Deep Groove Ball Bearing / Angular Contact Bearing, Back-to-Back Combination	Number of Bearings	Double
Flange Shape 1	Round Type	Bearing Material	Steel	Housing Material	S45C
Retaining Ring	Not Provided	Type	Angular Contact Bearing Holder Set

Please check the type/dimensions/specifications of the part E-LABGYB7009-S-225 in the Bearings with Housings, Triple Bearing, Pilot Type, Outer Ring Captured series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

type
- E-LABGY
- E-LABGYB
Clear
Bearing Inner Dia. d(mm)
15

17

20

25

30

35

40

45

50
Clear
Housing Surface Treatment
- Black Oxide
- Electroless Nickel Plating
Clear
Length L(mm)
60

65

70

75

80

85

90

100

110

120

125

130

140

150

160

175

180

200

220

225

250
Clear
Bearing Part Number
7002

7003

7004

7005

7006

7007

7008

7009

7010
Clear
Cover Type
- O-ring Cover
- Oil Seal Cover
- Standard Cover
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

13 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: What is the bearing housing set?: Answer: It supports and fixes the bearing of the load carrying shaft. The bearing can be accurately and simply assembled onto the mechanism using the holder.
Question: What do radial load and axial load mean?: Answer: The load applied to the shaft along the perpendicular direction of the shaft center line - radial load.
The load applied to the shaft along the horizontal direction of the shaft center line - axial load (thrust load).
Question: After the rotating shaft is assembled with the bearing housing set, there is obvious axial movement. How to solve the problem?: Answer: If you need to tighten the bearing axially, it is recommended to use a retaining ring, nut, etc. Please refer to the installation method.
When choosing a fixing ring, nut, etc. for axial tightening, please take care to avoid the retaining ring. For ring dimensions, please refer to the product specifications.
Question: For high-load service conditions, which type of bearing housing set is a better choice?: Answer: Double bearing type bearing housing set is suitable for heavy load operating environment, and keep fixed for transmission products such as rotating shaft.
Question: What tolerance should be selected for shaft parts used with bearing housing set?: Answer: It is recommended to choose MISUMI brand rotating shafts with g6 tolerance.

Check other FAQ (2 items) Hide

Products like this...

Part Number
E-LABGY7002-N-75
E-LABGY7002-R-60
E-LABGY7002-R-65
E-LABGYB7010-N-200
E-LABGYB7010-N-220
E-LABGYB7010-N-250

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Bearing Inner Dia. d (mm)	Housing Surface Treatment	Length L (mm)	Bearing Part Number	Cover Type
MYR 323.50	1 Piece(s)	Available	13 Day(s)	15	Electroless Nickel Plating	75	7002	Standard Cover
MYR 312.39	1 Piece(s)	Available	13 Day(s)	15	Electroless Nickel Plating	60	7002	O-ring Cover
MYR 316.57	1 Piece(s)	Available	13 Day(s)	15	Electroless Nickel Plating	65	7002	O-ring Cover
MYR 1,196.73	1 Piece(s)	Available	13 Day(s)	50	Black Oxide	200	7010	Standard Cover
MYR 1,266.82	1 Piece(s)	Available	13 Day(s)	50	Black Oxide	220	7010	Standard Cover
MYR 1,336.90	1 Piece(s)	Available	13 Day(s)	50	Black Oxide	250	7010	Standard Cover

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

Bearings with Housings, Triple Bearing, Pilot Type, Outer Ring Captured (E-LABGYB7009-S-225)

Part Number

Basic Information

Configure

Specification/Dimensions

type

Bearing Inner Dia. d(mm)

Housing Surface Treatment

Length L(mm)

Bearing Part Number

Cover Type

CAD

Days to Ship

Specify Alterations

Frequently asked question (FAQ)

Products like this...

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm