[Clean & Pack]PEEK Plates

[Clean & Pack]PEEK Plates

Configure

Additional Products in this Category

Tech Support

Configure

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm

(i)Caution

Specification Table

Alterations

Part Number

Basic Information

Specification/Dimensions

Days to Ship

Specify Alterations

How can we improve?

(i)Caution

Specification Table

Alterations

Part Number

Basic Information

Specification/Dimensions

Days to Ship

Specify Alterations

Grade

Color

Hole Drilling

Finishing Method

Plate Thickness, T Dimension(mm)

A/B Dimension Tolerance(mm)

T Dimension Tolerance(mm)

Through Hole, Bolt Nominal Diameter

Counterbore Hole, Bolt Nominal Diameter

Threaded Insert, Bolt Nominal Diameter

A Side Pitch, F Dimension(mm)

B Side Pitch, G Dimension(mm)

Cleaning Method

Finishing

Width(mm)

Length(mm)

T Dimension Tolerance

AB Dimension Tolerance

type

CAD

[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Two types of cleaning methods are available: "degreasing" and "precision cleaning." They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case
Degreasing	SL-□□	Anti-rust packing	Removal of organic stains	General environment	Regular assembly process
					Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Removal of organic stains Removal of contamination and dusts	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process

[Features]·PEEK is a super Engineered Plastic with high heat and chemical resistance.

There is no discoloration or dimensional change due to cleaning.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers

■ Standard Type

Finish	4 Sides		Upper-Lower Surface
Finish	Machining Method	Surface texture	Machining Method	Surface texture
Circular sawing	Circular sawing		Material
Guaranteed Perpendicularity of Circular Saw Cuts (NT)	Circular sawing		Material
4-side Milling, etc. * (4F)	Milling, etc.*		Material
6-surface Milling, etc. * (6F)	Milling, etc.*		Milling, etc.*
Upper-lower Surface Milling, etc. * (2F)	Circular sawing		Milling, etc.*
[ ! ] The roughness values of the material surface are for reference only.

■ Hole Machined Type

2HL

Nominal Dia.	b (Minimum Value)
3 to 10	2.5

[ ! ]A ≥ B

Finish	4 Sides		Upper-Lower Surface
Finish	Machining Method	Surface texture	Machining Method	Surface texture
Circular sawing	Circular sawing		Material
Upper-lower Surface Milling, etc.*	Circular sawing		Milling, etc.*
[ ! ] The roughness values of the material surface are for reference only.

Hole Machining Details

N (Through Hole)

Z (Counterbored Hole)

N (Through Hole) / Z (Counterbored Hole) Details

M (Threaded Insert)

■Table 1 M (Thread Insert) Details

Bolt Nominal Dia.	3	4	5	6	8	10
d	3.5	4.5	5.5	6.5	9	11
d₁	6.5	8	9.5	11	14	—
h	4	5	6	7	9	—

Ordering Code (Example) M4-L6
[ ! ]L ≤ T－1
[ ! ] When L + 5 < T, drilled holes will be blind ones.

Type	[M] Material	[M] Grade	Color	Operating Ambient Temperature	Cleaning Method
					Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-PKA	PEEK	Standard	Ash Brown	−50 to 250°C	Degreasing	General environment	Single packing	General environment
SH-PKA					Precision cleaning	Class 1,000	Degassing double packing	Class 10
SL-PKAH		Sliding	Black		Degreasing	General environment	Single packing	General environment
SH-PKAH					Precision cleaning	Class 1,000	Degassing double packing	Class 10
SL-PKCA		Electric Conductivity	Black	Ambient Temperature: Up to 250°C	Degreasing	General environment	Single packing	General environment
SH-PKCA					Precision cleaning	Class 1,000	Degassing double packing	Class 10

[ ! ] The material is not filled with glass fiber
[!]Milled^* = By using a milling cutter or router/planer
[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the

specification table.

■ Standard Type

	Part Number	—	A	—	B	—	T
· Circular Sawing	SL-PKA	—	300	—	200	—	5
· Guaranteed Perpendicularity of Circular Saw Cuts	SL-PKANTQ	—	200.5	—	100.5	—	10
·4-surface Milling^*	SL-PKA4FN	—	150.5	—	100.3	—	16
· 6-surface Milling, etc.^*	SH-PKA6FMN	—	100.3	—	90.5	—	10.5
·Upper-lower Surface Milling, etc.^*	SH-PKA2FQ	—	80	—	50	—	5

■ Hole Machined Type

Part Number	—	A	—	B	—	T	—	F	—	G	—	Screw Nominal Dia.	—	L
SL-PKA2H	—	50	—	25	—	8	—	F34	—	G10	—	N4
SH-PKCA2H	—	150	—	120	—	10	—	F80	—	G60	—	M8	—	L8

■ Standard Type
• Dimensional Tolerance of A and B

A·B	A, B Dimension Tolerance
Unit: mm	A, B Dimension Tolerance
Up to 99	±0.5
100 to 250	±0.75
251 or more	±1.0

• T Dimension Tolerance, Rate of Camber and Torsion

T	T Dimension Tolerance			Rates of Camber and Torsion
T	SL-PKA SH-PKA	SL-PKAH SH-PKAH	SL-PKCA SH-PKCA	per 1,000 mm
1	+0.1 to +0.5	—	—	—
2·3	±0.3	—	—	—
5 to 10	0 to +1.1	0 to +1.1	0 to +1.1	1.2% or less
12 to 25	0 to +1.7	—	0 to +1.7	0.8% or less
30·40	0 to +2.5	—	—	—

Precision Guarantee

Finish	Width Parallelism	Perpendicularity of Reference Plane
	per 100 mm
Guaranteed Perpendicularity of Circular Saw Cuts (NT)	0.1	0.1
4-side Milling (4F)
6-surface Milling (6F)

■ Hole Machined Type
• Dimensional Tolerance of A and B

A·B	A, B Dimension Tolerance
Unit: mm	A, B Dimension Tolerance
Up to 99	±0.5
100 to 250	±0.75
251 or more	±1.0

• T Dimension Tolerance, Rate of Camber and Torsion

T	T Dimension Tolerance			Rates of Camber and Torsion
T	SL-PKA SH-PKA	SL-PKAH SH-PKAH	SL-PKCA SH-PKCA	per 1,000 mm
1	+0.1 to +0.5	—	—	—
2·3	±0.3	—	—	—
5 to 10	0 to +1.1	0 to +1.1	0 to +1.1	1.2% or less
12 to 25	0 to +1.7	—	0 to +1.7	0.8% or less
30	0 to +2.5	—	—	—

■ Standard Type

Part Number								By material	A	B	T
Type	Finish Selection	T Dimension Tolerance	A, B Dimension Tolerance					Dimension Range	A	B	T
(Standard)	Circular sawing								1 mm Increments		Selection
SL-PKA	—	Not available	Not available					SL-PKA SH-PKA	20 to 500	20 to 400	1·2·3·5·6·8·10·12
SH-PKA								SL-PKA SH-PKA	20 to 250	20 to 150	16·20·25·30·40
								SL-PKAH SH-PKAH	20 to 300	20 to 200	5·8·10
(Sliding)								SL-PKCA SH-PKCA	20 to 300	20 to 200	10
SL-PKAH								SL-PKCA SH-PKCA	20 to 250	20 to 150	16·20
SH-PKAH	Guaranteed Perpendicularity of Circular Saw Cuts (NT)								0.5 mm Increments		Selection
	NT	Not available		T5·6·8·10	T12·16·20	T25	T30·40	SL-PKA SH-PKA	20 to 300	20 to 200	5·6·8·10·12
(Conductive Grade)			Q	0 to +0.3	0 to +0.4	0 to +0.5	0 to +0.7	SL-PKA SH-PKA	20 to 250	20 to 150	16·20·25·30·40
SL-PKCA			N	±0.2	±0.3	±0.4	±0.6	SL-PKAH SH-PKAH	20 to 300	20 to 200	5·8·10
SH-PKCA			M	－0.3 to 0	－0.4 to 0	－0.5 to 0	－0.7 to 0	SL-PKCA SH-PKCA	20 to 300	20 to 200	10
								SL-PKCA SH-PKCA	20 to 250	20 to 150	16·20
	4-surface Milling^* (4F)								0.1 mm Increments		Selection
	4F	Not available	Q 0 to +0.2					SL-PKA SH-PKA	10 to 300	10 to 200	5·6·8·10·12
			N ±0.1					SL-PKA SH-PKA	10 to 250	10 to 150	16·20·25·30·40
			M －0.2 to 0					SL-PKAH SH-PKAH	10 to 300	10 to 200	5·8·10
								SL-PKCA SH-PKCA	10 to 300	10 to 200	10
								SL-PKCA SH-PKCA	10 to 250	10 to 150	16·20
	6-surface Milling, etc.^* (6F)								0.1 mm Increments		0.1 mm Increments
	6F	Q 0 to +0.2	Q 0 to +0.2					SL-PKA SH-PKA	10 to 300	10 to 200	5 to 9
		N ±0.1	N ±0.1					SL-PKA SH-PKA	10 to 250	10 to 150	9.1 to 39
		M -0.2 to 0	M －0.2 to 0					SL-PKAH SH-PKAH	10 to 300	10 to 200	5 to 9
								SL-PKCA SH-PKCA	10 to 300	10 to 200	9.1 to 10
								SL-PKCA SH-PKCA	10 to 250	10 to 150	10.1 to 19
	Upper-lower Surface Milling, etc.^* (2F)								1 mm Increments		0.1 mm Increments
	2F	Q 0 to +0.2	Not available					SL-PKA SH-PKA	20 to 250	20 to 150	5 to 39
		N ±0.1						SL-PKAH SH-PKAH			5 to 9
		M -0.2 to 0						SL-PKCA SH-PKCA			9.1 to 19

■ Hole Machined Type

Part Number			A	B	By material	T	F	G
Type	T Dimension Tolerance	Number of Holes	A	B	T Dimension Range	T	F	G
(Standard)	Circular sawing		1 mm Increments			Selection	0.5 mm Increments
SL-PKA	Not available	2H(Horizontal)	20 to 500	20 to 400	SL-PKA SH-PKA	1·2·3·5·6·8·10·12	6 to 491.5 (2H·4H)	4.5 to 395.5 (2H)
SH-PKA		2HL(Vertical)					4.5 to 495.5 (2HL)	6 to 391.5 (2HL·4H·6H)
		4H					6 to 245.5 (6H)
(Sliding)		6H	20 to 300	20 to 200	SL-PKAH SH-PKAH	5·8·10	6 to 291.5 (2H·4H)	4.5 to 195.5 (2H)
SL-PKAH			20 to 300	20 to 200	SL-PKAH SH-PKAH	5·8·10	4.5 to 295.5 (2HL)	6 to 191.5 (2HL·4H·6H)
SH-PKAH			20 to 300	20 to 200	SL-PKCA SH-PKCA	10	6 to 145.5 (6H)
			20 to 250	20 to 150	SL-PKA SH-PKA	16·20·25·30	6 to 241.5 (2H·4H)	4.5 to 145.5 (2H)
(Conductive Grade)					SL-PKA SH-PKA	16·20·25·30	4.5 to 245.5 (2HL)	6 to 141.5 (2HL·4H·6H)
SL-PKCA					SL-PKCA SH-PKCA	16·20	6 to 120.5 (6H)
SH-PKCA	Upper-lower Surface Milling, etc.^*		1 mm Increments			0.1 mm Increments	0.5 mm Increments
	2FQ 0 to +0.2	2H(Horizontal)	20 to 250	20 to 150	SL-PKA SH-PKA	5 to 29	6 to 241.5 (2H·4H)	4.5 to 145.5 (2H)
	2FN ±0.1	2HL(Vertical)			SL-PKA SH-PKA	5 to 29	4.5 to 245.5 (2HL)	6 to 141.5 (2HL·4H·6H)
	2FM －0.2 to 0	4H			SL-PKAH SH-PKAH	5 to 9	6 to 120.5 (6H)
		6H			SL-PKCA SH-PKCA	9.1 to 19

[!] Dimension F Specification Range – 2H/4H type selection: d (d₁) + 2.5 ≤ F ≤ A - d (d₁) - 5; for 2HL: d (d₁)/2 + 2.5 ≤ F ≤ A - d (d₁)/2 - 2.5; for 6H: d (d₁) + 2.5 ≤ F ≤ (A - d (d₁) - 5)/2 is required.
[!]Dimension G Specification Range – 2H type selection: d (d₁)/2 + 2.5 ≤ G ≤ B - d (d₁)/2 - 2.5; for 2HL, 4H and 6H: d (d₁) + 2.5 ≤ G ≤ B - d (d₁) - 5 is required.
(d for through hole and threaded insert, d₁ for counterbore)
[ ! ] For Hole Machined Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).

T Dimension	Hole Machined Type Screw Nominal Dia. Selection
	Through Hole	Counterbore Hole					Threaded Insert
	N	Z					M						L
1 to 3	3 4 5 6 8 10	—					—						(Threaded Insert Length) Select from Table 1
5 to 7		—					3	4
8 to 9		3	4	5			3	4	5	6	8
10 to 15			4	5	6		3	4	5	6	8	10
16 to 30			4	5	6	8	3	4	5	6	8	10

■ Standard Type

Alterations	Corner Radius Machining	Corner Cut

Code	CRA·CRB·CRC·CRD	CCA·CCB·CCC·CCD
Spec.	Adds radius machining to any corner. R = 5 mm Increments [!] 10 ≤ A (B) - R (2R) [ ! ]5 ≤ CRA·CRB·CRC·CRD ≤ 100 Ordering code (Example) Adds R10 at the corner of A and C CRA10－CRC10 [NG] Not applicable to 4-surface milling, etc., or 6-surface milling, etc.	Any corner can be cut. 5 ≤ corner cut ≤ 50 10 ≤ A - C (2C) or 10 ≤ B - C (2C) 5 mm Increments Ordering Code (Example) When the corners of A and D are cut by C5 →CCA5 - CCD5 [NG] Not applicable to 4-surface milling, etc., or 6-surface milling, etc.

[NG] Not applicable for Hole Machined Type.
[NG] Not applicable for T40

■ Hole Machined Type

Alterations	Hole Position from Left	Hole Position from Bottom
Alterations
Code	XC	YC
Spec.	XC = 0.5 mm Increments " ! " (2H/4H Type) d (d₁ )/2 + 2.5 ≤ XC ≤ A - F - d (d₁ )/2 - 2.5 " ! " (6H Type) d (d₁ )/2 + 2.5 ≤ XC ≤ A - 2F - d (d₁ )/2 - 2.5	YC = 0.5 mm Increments [ ! ] d (d₁ )/2 + 2.5 ≤ YC ≤ B - G - d (d₁ )/2 - 2.5 [NG] Not available for 2H Type

Cleaning Process
· Degreasing (Part Number: SL-□□)

Working Environment: General environment
IPA Cleaning		Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water)		Use clean air blow		Single Packing

· Precision cleaning (Part Number: SH-□□)

Working Environment: General environment				Working Environment: Class 1,000				Working Environment: Class 10
IPA Cleaning		Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water)		Use clean air blow		Use nitrogen blow		Degassing double packing

Packaging Example

Degreasing (Part Number: SL-□□)

Precision Cleaning (Part Number: SH-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Removal of organic stains	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Removal of organic stains	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Removal of organic stains Removal of contamination and dusts	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
SH-PKAH2FN2H-[20-250/1]-[20-150/1]-[5-9/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-M[3,4,5,6,8,10]
SH-PKAH2FN2H-[20-250/1]-[20-150/1]-[5-9/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-N[3,4,5,6,8,10]
SH-PKAH2FN2H-[20-250/1]-[20-150/1]-[5-9/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-Z[3,4,5,6]
SH-PKAH2FQ2H-[20-250/1]-[20-150/1]-[5-9/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-M[3,4,5,6,8,10]
SH-PKAH2FQ2H-[20-250/1]-[20-150/1]-[5-9/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-N[3,4,5,6,8,10]
SH-PKAH2FQ2H-[20-250/1]-[20-150/1]-[5-9/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-Z[3,4,5,6]
SH-PKCA2FN6H-[20-250/1]-[20-150/1]-[9.1-19/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10]
SH-PKCA2FN6H-[20-250/1]-[20-150/1]-[9.1-19/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10]
SH-PKCA2FN6H-[20-250/1]-[20-150/1]-[9.1-19/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-Z[3,4,5,6,8]
SL-PKAH2FN2H-[20-250/1]-[20-150/1]-[5-9/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-M[3,4,5,6,8,10]
SL-PKAH2FN2H-[20-250/1]-[20-150/1]-[5-9/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-N[3,4,5,6,8,10]
SL-PKAH2FN2H-[20-250/1]-[20-150/1]-[5-9/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-Z[3,4,5,6]
SL-PKAH2FQ2H-[20-250/1]-[20-150/1]-[5-9/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-M[3,4,5,6,8,10]
SL-PKAH2FQ2H-[20-250/1]-[20-150/1]-[5-9/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-N[3,4,5,6,8,10]
SL-PKAH2FQ2H-[20-250/1]-[20-150/1]-[5-9/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-Z[3,4,5,6]
SL-PKCA2FN6H-[20-250/1]-[20-150/1]-[9.1-19/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-M[3,4,5,6,8,10]
SL-PKCA2FN6H-[20-250/1]-[20-150/1]-[9.1-19/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-N[3,4,5,6,8,10]
SL-PKCA2FN6H-[20-250/1]-[20-150/1]-[9.1-19/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-Z[3,4,5,6,8]

Standard Unit Price	Minimum order quantity	Days to Ship	Grade	Color	Hole Drilling	Finishing Method	Plate Thickness, T Dimension (mm)	A/B Dimension Tolerance (mm)	T Dimension Tolerance (mm)	Through Hole, Bolt Nominal Diameter	Counterbore Hole, Bolt Nominal Diameter	Threaded Insert, Bolt Nominal Diameter	A Side Pitch, F Dimension (mm)	B Side Pitch, G Dimension (mm)	Cleaning Method	Finishing	Width (mm)	Length (mm)	T Dimension Tolerance	AB Dimension Tolerance
-	1 Piece(s)	6 Day(s) or more	Sliding	Black Color	2H	Upper and Lower Side Milling, etc.	5 ～ 9	-	±0.10	-	-	3 ～ 10	6 ～ 241.5	4.5 ～ 145.5	Precision Cleaning	Upper-lower Surface Milling	20 ～ 150	20 ～ 250	N(±0.1)	-
-	1 Piece(s)	6 Day(s) or more	Sliding	Black Color	2H	Upper and Lower Side Milling, etc.	5 ～ 9	-	±0.10	3 ～ 10	-	-	6 ～ 241.5	4.5 ～ 145.5	Precision Cleaning	Upper-lower Surface Milling	20 ～ 150	20 ～ 250	N(±0.1)	-
-	1 Piece(s)	6 Day(s) or more	Sliding	Black Color	2H	Upper and Lower Side Milling, etc.	5 ～ 9	-	±0.10	-	3 ～ 6	-	6 ～ 241.5	4.5 ～ 145.5	Precision Cleaning	Upper-lower Surface Milling	20 ～ 150	20 ～ 250	N(±0.1)	-
-	1 Piece(s)	6 Day(s) or more	Sliding	Black Color	2H	Upper and Lower Side Milling, etc.	5 ～ 9	-	0 to ＋0.2	-	-	3 ～ 10	6 ～ 241.5	4.5 ～ 145.5	Precision Cleaning	Upper-lower Surface Milling	20 ～ 150	20 ～ 250	Q(+0.2/0)	-
-	1 Piece(s)	6 Day(s) or more	Sliding	Black Color	2H	Upper and Lower Side Milling, etc.	5 ～ 9	-	0 to ＋0.2	3 ～ 10	-	-	6 ～ 241.5	4.5 ～ 145.5	Precision Cleaning	Upper-lower Surface Milling	20 ～ 150	20 ～ 250	Q(+0.2/0)	-
-	1 Piece(s)	6 Day(s) or more	Sliding	Black Color	2H	Upper and Lower Side Milling, etc.	5 ～ 9	-	0 to ＋0.2	-	3 ～ 6	-	6 ～ 241.5	4.5 ～ 145.5	Precision Cleaning	Upper-lower Surface Milling	20 ～ 150	20 ～ 250	Q(+0.2/0)	-
-	1 Piece(s)	6 Day(s) or more	Conductive	Black Color	6H	Upper and Lower Side Milling, etc.	9.1 ～ 19	-	±0.10	-	-	3 ～ 10	6 ～ 120.5	6 ～ 141.5	Precision Cleaning	Upper-lower Surface Milling	20 ～ 150	20 ～ 250	N(±0.1)	-
-	1 Piece(s)	6 Day(s) or more	Conductive	Black Color	6H	Upper and Lower Side Milling, etc.	9.1 ～ 19	-	±0.10	3 ～ 10	-	-	6 ～ 120.5	6 ～ 141.5	Precision Cleaning	Upper-lower Surface Milling	20 ～ 150	20 ～ 250	N(±0.1)	-
-	1 Piece(s)	6 Day(s) or more	Conductive	Black Color	6H	Upper and Lower Side Milling, etc.	9.1 ～ 19	-	±0.10	-	3 ～ 8	-	6 ～ 120.5	6 ～ 141.5	Precision Cleaning	Upper-lower Surface Milling	20 ～ 150	20 ～ 250	N(±0.1)	-
-	1 Piece(s)	6 Day(s) or more	Sliding	Black Color	2H	Upper and Lower Side Milling, etc.	5 ～ 9	-	±0.10	-	-	3 ～ 10	6 ～ 241.5	4.5 ～ 145.5	Degreasing	Upper-lower Surface Milling	20 ～ 150	20 ～ 250	N(±0.1)	-
-	1 Piece(s)	6 Day(s) or more	Sliding	Black Color	2H	Upper and Lower Side Milling, etc.	5 ～ 9	-	±0.10	3 ～ 10	-	-	6 ～ 241.5	4.5 ～ 145.5	Degreasing	Upper-lower Surface Milling	20 ～ 150	20 ～ 250	N(±0.1)	-
-	1 Piece(s)	6 Day(s) or more	Sliding	Black Color	2H	Upper and Lower Side Milling, etc.	5 ～ 9	-	±0.10	-	3 ～ 6	-	6 ～ 241.5	4.5 ～ 145.5	Degreasing	Upper-lower Surface Milling	20 ～ 150	20 ～ 250	N(±0.1)	-
-	1 Piece(s)	6 Day(s) or more	Sliding	Black Color	2H	Upper and Lower Side Milling, etc.	5 ～ 9	-	0 to ＋0.2	-	-	3 ～ 10	6 ～ 241.5	4.5 ～ 145.5	Degreasing	Upper-lower Surface Milling	20 ～ 150	20 ～ 250	Q(+0.2/0)	-
-	1 Piece(s)	6 Day(s) or more	Sliding	Black Color	2H	Upper and Lower Side Milling, etc.	5 ～ 9	-	0 to ＋0.2	3 ～ 10	-	-	6 ～ 241.5	4.5 ～ 145.5	Degreasing	Upper-lower Surface Milling	20 ～ 150	20 ～ 250	Q(+0.2/0)	-
-	1 Piece(s)	6 Day(s) or more	Sliding	Black Color	2H	Upper and Lower Side Milling, etc.	5 ～ 9	-	0 to ＋0.2	-	3 ～ 6	-	6 ～ 241.5	4.5 ～ 145.5	Degreasing	Upper-lower Surface Milling	20 ～ 150	20 ～ 250	Q(+0.2/0)	-
-	1 Piece(s)	6 Day(s) or more	Conductive	Black Color	6H	Upper and Lower Side Milling, etc.	9.1 ～ 19	-	±0.10	-	-	3 ～ 10	6 ～ 120.5	6 ～ 141.5	Degreasing	Upper-lower Surface Milling	20 ～ 150	20 ～ 250	N(±0.1)	-
-	1 Piece(s)	6 Day(s) or more	Conductive	Black Color	6H	Upper and Lower Side Milling, etc.	9.1 ～ 19	-	±0.10	3 ～ 10	-	-	6 ～ 120.5	6 ～ 141.5	Degreasing	Upper-lower Surface Milling	20 ～ 150	20 ～ 250	N(±0.1)	-
-	1 Piece(s)	6 Day(s) or more	Conductive	Black Color	6H	Upper and Lower Side Milling, etc.	9.1 ～ 19	-	±0.10	-	3 ～ 8	-	6 ～ 120.5	6 ～ 141.5	Degreasing	Upper-lower Surface Milling	20 ～ 150	20 ～ 250	N(±0.1)	-

Material	PEEK	Environmental Compliance	RoHS compliant (10 substances)	Material Name	PEEK

18 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Grade
- Standard
- Conductive
- Sliding
Clear
Color
- Black Color
- Gray Color
Clear
Hole Drilling
No Drilling Alteration

2H

6H
Clear
Finishing Method
- Circular Saw Cutting, Right Angle Assurance
- Side Milling, etc.
- 6-Sided Milling, etc.
- Upper and Lower Side Milling, etc.
Clear
Plate Thickness, T Dimension(mm)
5

6

8

10

12

16

20

25

30

40
[5-19/0.1mm Unit(s)]
Clear
A/B Dimension Tolerance(mm)
－0.2 to 0

－0.5 to 0

0 to ＋0.2
Clear
T Dimension Tolerance(mm)
0 to ＋0.2

±0.10
Clear
Through Hole, Bolt Nominal Diameter
3

4

5

6

8

10
Clear
Counterbore Hole, Bolt Nominal Diameter
3

4

5

6

8
Clear
Threaded Insert, Bolt Nominal Diameter
3

4

5

6

8

10
Clear
A Side Pitch, F Dimension(mm)
[6-241.5/0.5mm Unit(s)]
Clear
B Side Pitch, G Dimension(mm)
[4.5-145.5/0.5mm Unit(s)]
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
Clear
Finishing
- 4-side Milling
- 6-surface Milling
- Guaranteed Perpendicularity of Circular Saw Cuts
- Upper-lower Surface Milling
Clear
Width(mm)
[20-150/1mm Unit(s)]
Clear
Length(mm)
[20-250/1mm Unit(s)]
Clear
T Dimension Tolerance
- N(±0.1)
- Q(+0.2/0)
Clear
AB Dimension Tolerance
- M(0/-)
- M(0/-0.2)
- Q(+0.2/0)
Clear
type
- SH-PKA6F□□
- SH-PKAH2F□
- SH-PKAH2F□□H
- SH-PKAH4F□
- SH-PKANT□
- SH-PKCA2F□□H
- SL-PKA6F□□
- SL-PKAH2F□
- SL-PKAH2F□□H
- SL-PKAH4F□
- SL-PKANT□
- SL-PKCA2F□□H
Clear
CAD
- 2D
- 3D
Clear

All

6 Day(s) or Less
Clear

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

: Technical Inquiry

Bolt
Nominal Dia.