(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
[Clean & Pack]Manifold Block - Pneumatic, Lateral Through Hole, Upper Hole (Part Numbers)
![[Clean & Pack]Manifold Block - Pneumatic, Lateral Through Hole, Upper Hole](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110311007009_001.jpg?$product_main$)
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
| ·Degreasing (Anti-rust single packing) | : Part Number SL-□□ |
| ·Precision cleaning (Degassing double packing) | : Part Number SH-□□ |
| ·Electrolytic polishing + precision cleaning (Degassing double packing) | : Part Number SHD-□□ |
| Product Part Number | Cleaning Method | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Process |
| SL-□□ | Degreasing | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| SH-□□ | Precision cleaning | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| SHD-□□ | Electrolytic polishing + precision cleaning | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Manifold blocks for pneumatic. G (PF) thread machining can also be specified.
(i)Caution
- Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Part Number
Configured Part Number is shown.
● Standard Hole Shape
Front Surface Counterbore
| Mounting Hole Dimension | d | D | h | D1 | d1 | h1 |
| M5 | 5.5 | 9.5 | 5.5 | 8 | 4.2 | 4.5 |
| M6 | 6.6 | 11 | 6.5 | 9.5 | 5.1 | 5.5 |
| M8 | 8.5 | 14 | 8.5 | 11 | 6.8 | 6.5 |
● Mounting Hole Change
Back Surface Counterbore (ZB)
Through Hole (NA)
Tapped Hole (T)
Counterbore Tapped Hole (ZT)
JIS B0203 Rc (PT) JIS B0202 G (PF): ISO 228-1 Interchangeable
ANSI/ASME B.I.20.1－1983 (NPT)
* Drawing for 3 Circuit Type is selected. The total number of Q, G and K threads is 5.
[ ! ] Mounting hole shape can be selected freely.
[ ! ] Standard hole shape is selected when no hole shape modification is specified.
Note that the default of 20 Sq. is Through Hole.
[L Dimension Calculation]
Example: For SL-BMSFCP3- to -P25
L = N × P + 2E = (Number of Circuits 3 - 1) × 25 + 2 × 20 = 90
| Type | [M] Material | [S] Surface Treatment | Max. Operating Pressure | Cleaning Method | |||||||||
| Pitch (P) Standard | Pitch (P) Configurable | ||||||||||||
| 20 sq. | 30 sq. | 40 sq. | 60 sq. | 20 sq. | 30 sq. | 40 sq. | Cleaning Method | Cleaning Environment | Packaging Type | Packing Environment | |||
| SL-BMSFC | SL-BMSF | SL-BMSFL | SL-BMSFB | SL-BMSFCP | SL-BMSFP | SL-BMSFLP | Aluminum Alloy | — | 1 MPa ≈ 10 kgf/cm2 or less | Degreasing | General environment | Anti-rust packing | General environment |
| SH-BMSFC | SH-BMSF | SH-BMSFL | SH-BMSFB | SH-BMSFCP | SH-BMSFP | SH-BMSFLP | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | |||
| SHD-BMSFC | SHD-BMSF | SHD-BMSFL | SHD-BMSFB | SHD-BMSFCP | SHD-BMSFP | SHD-BMSFLP | Electrolytic polishing + precision cleaning | ||||||
| SL-BMSFCA | SL-BMSFA | SL-BMSFLA | — | SL-BMSFCAP | SL-BMSFAP | SL-BMSFLAP | Clear Anodize | Degreasing | General environment | Anti-rust packing | General environment | ||
| SH-BMSFCA | SH-BMSFA | SH-BMSFLA | — | SH-BMSFCAP | SH-BMSFAP | SH-BMSFLAP | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | |||
[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the
specification table.Specification Table
| Part Number | — | Q | — | R | — | S | — | P | |||||
| Type | Mounting Hole Change | Number of Circuits | |||||||||||
| SL-BMSF | T | 5 | — | Q2 | — | G1 | — | K2 | |||||
| SH-BMSFLP | ZT | 5 | — | Q2 | — | G3 | — | K3 | — | P50 | |||
| SHD-G-BMSFLP | ZT | 5 | — | Q2 | — | G3 | — | K3 | — | P50 | (G Thread) | ||
| Part Number | Rc (PT), NPT, M (Coarse) Selection | Pitch P | Number of Pitches | Q·G·K | A | B | E | F | X | Y | Mounting Hole | |||||
| Type | Mounting Hole Change | Number of Circuits | Q | G·K | Standard | Configurable 1 mm Increments | N | Total Number of Threads | M | |||||||
| (20 sq.) | T (Tapped) | 1 | 1 (1/8) M3 (M3) M4 (M4) 5 (M5) | 1 (1/8) M3 (M3) M4 (M4) 5 (M5) | — | — | 0 | 3 | 20 | 20 | 20 | 13 | 5 | 4 | M5 | |
| Pitch Standard | Pitch Configurable | 2 | 15 | 15 to 50 | 1 | 4 | ||||||||||
| SL-BMSFC | SL-BMSFCP | 3 | 2 | 5 | ||||||||||||
| SH-BMSFC | SH-BMSFCP | 4 | 3 | 6 | ||||||||||||
| SHD-BMSFC | SHD-BMSFCP | 5 | 4 | 7 | ||||||||||||
| SL-BMSFCA | SL-BMSFCAP | 6 | 5 | 8 | ||||||||||||
| SH-BMSFCA | SH-BMSFCAP | 7 | 1 (1/8) | 6 | 9 | |||||||||||
| 8 | 15 to 35 | 7 | 10 | |||||||||||||
| (30 sq.) | ZB (Back Surface Counterbore) NA (Through) T (Tapped) ZT (Counterbore Tapped) | 1 | 1 (1/8) 2 (1/4) 5 (M5) 1 N (NPT1/8) 2 N (NPT1/4) | 1 (1/8) 2 (1/4) 5 (M5)※ 1 N (NPT1/8) 2 N (NPT1/4) | — | — | 0 | 3 | 30 | 30 | 20 | 20 | 7.5 | 7 | M5 | |
| Pitch Standard | Pitch Configurable | 2 | 30 | 20 to 50 | 1 | 4 | ||||||||||
| SL-BMSF | SL-BMSFP | 3 | 2 | 5 | ||||||||||||
| SH-BMSF | SH-BMSFP | 4 | 3 | 6 | ||||||||||||
| SHD-BMSF | SHD-BMSFP | 5 | 4 | 7 | ||||||||||||
| SL-BMSFA | SL-BMSFAP | 6 | 5 | 8 | ||||||||||||
| SH-BMSFA | SH-BMSFAP | 7※ | 6 | 9 | ||||||||||||
| 8※ | 20 to 35 | 7 | 10 | |||||||||||||
| (40 sq.) | 1 | 1 (1/8) 2 (1/4) 3 (3/8) 4 (1/2) | 2 (1/4) 3 (3/8) 4 (1/2) | — | — | 0 | 3 | 40 | 40 | 25 | 25 | 7 | 7 | M6 | ||
| Pitch Standard | Pitch Configurable | 2 | 40 | 35 to 60 | 1 | 4 | ||||||||||
| SL-BMSFL | SL-BMSFLP | 3 | 2 | 5 | ||||||||||||
| SH-BMSFL | SH-BMSFLP | 4 | 3 | 6 | ||||||||||||
| SHD-BMSFL | SHD-BMSFLP | 5 | 4 | 7 | ||||||||||||
| SL-BMSFLA | SL-BMSFLAP | 6 | 5 | 8 | ||||||||||||
| SH-BMSFLA | SH-BMSFLAP | 7 | 35 to 50 | 6 | 9 | |||||||||||
| 8 | 35 to 40 | 7 | 10 | |||||||||||||
| (60 sq.) | 1 | 6 (3/4) 8 (1) | 8 (1) | — | — | 0 | 3 | 60 | 60 | 40 | 35 | 25 | 9 | M8 | ||
| Pitch Standard | ||||||||||||||||
| SL-BMSFB | 2 | 60 | 1 | 4 | ||||||||||||
| SH-BMSFB | 3 | 2 | 5 | |||||||||||||
| SHD-BMSFB | 4 | 3 | 6 | |||||||||||||
[!] Specify the pitch taking into consideration the necessary dimensions for fitting the couplings. [!] Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2-3 port pitch, and 5-6 port pitch from the left to the right. (Except for 20 Sq.)
[!] When * marked 7 or 8 Circuit is selected from 30 sq., 5(M5) is not available for G or K. [!] For G and K of 20 sq. Pitch Configurable Type, M3, M4 or 5 (M5) are not selectable.
■G Screw Type
[!] For Q, G and K, specify 1, 2, 3, 4, 5, 6, 8, 1N, or 2N indicated before (). [!] Single Circuit is not available for Pitch Configurable Type.
[!] Specify the pitch taking into consideration the necessary dimensions for fitting the couplings. [!] Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2-3 port pitch, and 5-6 port pitch from the left to the right. (Except for 20 Sq.)
| Part Number | Rc (PT), NPT, M (Coarse) Selection | Pitch P | Number of Pitches | Q·G·K | A | B | E | F | X | Y | Mounting Hole | |||||
| Type | Mounting Hole Change | Number of Circuits | Q | G·K | Standard | Configurable 1 mm Increments | N | Total Number of Threads | M | |||||||
| (20 sq.) | T (Tapped) | 1 | 1 (1/8) | 1 (1/8) | — | — | 0 | 3 | 20 | 20 | 20 | 13 | 5 | 4 | M5 | |
| Pitch Standard | Pitch Configurable | 2 | 15 | 15 to 50 | 1 | 4 | ||||||||||
| SL-G-BMSFC | SL-G-BMSFCP | 3 | 2 | 5 | ||||||||||||
| SH-G-BMSFC | SH-G-BMSFCP | 4 | 3 | 6 | ||||||||||||
| SHD-G-BMSFC | SHD-G-BMSFCP | 5 | 4 | 7 | ||||||||||||
| SL-G-BMSFCA | SL-G-BMSFCAP | 6 | 5 | 8 | ||||||||||||
| SH-G-BMSFCA | SH-G-BMSFCAP | 7 | 6 | 9 | ||||||||||||
| 8 | 15 to 35 | 7 | 10 | |||||||||||||
| (30 sq.) | ZB (Back Surface Counterbore) NA (Through) T (Tapped) ZT (Counterbore Tapped) | 1 | 1 (1/8) 2 (1/4) 1 N (NPT1/8) 2 N (NPT1/4) | 1 (1/8) 2 (1/4) 1 N (NPT1/8) 2 N (NPT1/4) | — | — | 0 | 3 | 30 | 30 | 20 | 20 | 7.5 | 7 | M5 | |
| Pitch Standard | Pitch Configurable | 2 | 30 | 20 to 50 | 1 | 4 | ||||||||||
| SL-G-BMSF | SL-G-BMSFP | 3 | 2 | 5 | ||||||||||||
| SH-G-BMSF | SH-G-BMSFP | 4 | 3 | 6 | ||||||||||||
| SHD-G-BMSF | SHD-G-BMSFP | 5 | 4 | 7 | ||||||||||||
| SL-G-BMSFA | SL-G-BMSFAP | 6 | 5 | 8 | ||||||||||||
| SH-G-BMSFA | SH-G-BMSFAP | 7 | 6 | 9 | ||||||||||||
| 8 | 20 to 35 | 7 | 10 | |||||||||||||
| (40 sq.) | 1 | 1 (1/8) 2 (1/4) 3 (3/8) 4 (1/2) | 2 (1/4) 3 (3/8) 4 (1/2) | — | — | 0 | 3 | 40 | 40 | 25 | 25 | 7 | 7 | M6 | ||
| Pitch Standard | Pitch Configurable | 2 | 40 | 35 to 60 | 1 | 4 | ||||||||||
| SL-G-BMSFL | SL-G-BMSFLP | 3 | 2 | 5 | ||||||||||||
| SH-G-BMSFL | SH-G-BMSFLP | 4 | 3 | 6 | ||||||||||||
| SHD-G-BMSFL | SHD-G-BMSFLP | 5 | 4 | 7 | ||||||||||||
| SL-G-BMSFLA | SL-G-BMSFLAP | 6 | 5 | 8 | ||||||||||||
| SH-G-BMSFLA | SH-G-BMSFLAP | 7 | 35 to 50 | 6 | 9 | |||||||||||
| 8 | 35 to 40 | 7 | 10 | |||||||||||||
| (60 sq.) | 1 | 6 (3/4) 8 (1) | 8 (1) | — | — | 0 | 3 | 60 | 60 | 40 | 35 | 25 | 9 | M8 | ||
| Pitch Standard | ||||||||||||||||
| SL-G-BMSFB | 2 | 60 | 1 | 4 | ||||||||||||
| SH-G-BMSFB | 3 | 2 | 5 | |||||||||||||
| SHD-G-BMSFB | 4 | 3 | 6 | |||||||||||||
[!] Specify the pitch taking into consideration the necessary dimensions for fitting the couplings. [!] Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2-3 port pitch, and 5-6 port pitch from the left to the right. (Except for 20 Sq.)
Cleaning Process
* Stainless steel products may be used with alkaline hot pure water. There is no change in cleanliness.
* If the surface treatment is low-temperature black chrome plating, IPA cleaning will be applied.
Working Environment: General environment | ||||||
|---|---|---|---|---|---|---|
 Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning |  |  High-pressure jet washing (Ro water) followed by pure water cleaning | |  Oil-free Compressor Used | |  Anti-rust single packing |
· Precision cleaning (Part Number: SH-□□)
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||
|---|---|---|---|---|---|---|---|---|
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning | | High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning | |  Use pure water (13 MΩ·cm) | | Use nitrogen blow | |  Conducted on a clean bench in a Class 10 clean environment |
· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning | |  Electrolytic polishing with an electrolytic polishing layer according to the material | | High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning | | Use warm pure water (13 MΩ·cm) | | Use nitrogen blow | | Conducted on a clean bench in a Class 10 clean environment |
Packaging Example| For degreasing: (Part Number: SL-□□)  Depending on some products and dimensions, packaging type may vary. | For precision cleaning or electrolytic polishing + precision cleaning: (Part Number: SH-□□/SHD-□□)  [ ! ] Both the first and second layer packaging are degassed. |
Cleaning Effectiveness / Recommended Environment for UseCleaning Method | Product Part Number | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Use Case and Process |
|---|---|---|---|---|---|
| Degreasing | SL-□□ | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| Precision cleaning | SH-□□ | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| Electrolytic polishing + precision cleaning | SHD-□□ | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| SL-BMSFAPNA4-Q[1,2,5]-G[1,2,5]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPNA4-Q[1,2,5]-G[1,2,5]-K[1,2,5]-P[20-50/1] |
| SL-BMSFAPNA5-[Q1N,Q2N]-[G1N,G2N]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPNA5-[Q1N,Q2N]-[G1N,G2N]-K[1,2]-P[20-50/1] |
| SL-BMSFAPNA5-[Q1N,Q2N]-G[1,2]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPNA5-[Q1N,Q2N]-G[1,2]-K[1,2]-P[20-50/1] |
| SL-BMSFAPNA5-Q[1,2,5]-[G1N,G2N]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPNA5-Q[1,2,5]-[G1N,G2N]-K[1,2]-P[20-50/1] |
| SL-BMSFAPNA5-Q[1,2,5]-G[1,2]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPNA5-Q[1,2,5]-G[1,2]-K[1,2]-P[20-50/1] |
| SL-BMSFAPNA6-[Q1N,Q2N]-[G1N,G2N]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPNA6-[Q1N,Q2N]-[G1N,G2N]-K[1,2]-P[20-50/1] |
| SL-BMSFAPNA6-[Q1N,Q2N]-G[1,2]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPNA6-[Q1N,Q2N]-G[1,2]-K[1,2]-P[20-50/1] |
| SL-BMSFAPNA6-Q[1,2,5]-[G1N,G2N]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPNA6-Q[1,2,5]-[G1N,G2N]-K[1,2]-P[20-50/1] |
| SL-BMSFAPNA6-Q[1,2,5]-G[1,2]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPNA6-Q[1,2,5]-G[1,2]-K[1,2]-P[20-50/1] |
| SL-BMSFAPNA7-[Q1N,Q2N]-[G1N,G2N]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPNA7-[Q1N,Q2N]-[G1N,G2N]-K[1,2]-P[20-50/1] |
| SL-BMSFAPNA7-[Q1N,Q2N]-G[1,2]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPNA7-[Q1N,Q2N]-G[1,2]-K[1,2]-P[20-50/1] |
| SL-BMSFAPNA7-Q[1,2,5]-[G1N,G2N]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPNA7-Q[1,2,5]-[G1N,G2N]-K[1,2]-P[20-50/1] |
| SL-BMSFAPNA7-Q[1,2,5]-G[1,2]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPNA7-Q[1,2,5]-G[1,2]-K[1,2]-P[20-50/1] |
| SL-BMSFAPNA8-[Q1N,Q2N]-[G1N,G2N]-[K1N,K2N]-P[20-35/1] |
| SL-BMSFAPNA8-[Q1N,Q2N]-[G1N,G2N]-K[1,2]-P[20-35/1] |
| SL-BMSFAPNA8-[Q1N,Q2N]-G[1,2]-[K1N,K2N]-P[20-35/1] |
| SL-BMSFAPNA8-[Q1N,Q2N]-G[1,2]-K[1,2]-P[20-35/1] |
| SL-BMSFAPNA8-Q[1,2,5]-[G1N,G2N]-[K1N,K2N]-P[20-35/1] |
| SL-BMSFAPNA8-Q[1,2,5]-[G1N,G2N]-K[1,2]-P[20-35/1] |
| SL-BMSFAPNA8-Q[1,2,5]-G[1,2]-[K1N,K2N]-P[20-35/1] |
| SL-BMSFAPNA8-Q[1,2,5]-G[1,2]-K[1,2]-P[20-35/1] |
| SL-BMSFAPT2-[Q1N,Q2N]-[G1N,G2N]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT2-[Q1N,Q2N]-[G1N,G2N]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT2-[Q1N,Q2N]-G[1,2]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT2-[Q1N,Q2N]-G[1,2]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT2-Q[1,2,5]-[G1N,G2N]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT2-Q[1,2,5]-[G1N,G2N]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT2-Q[1,2,5]-G[1,2]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT2-Q[1,2,5]-G[1,2]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT3-[Q1N,Q2N]-[G1N,G2N]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT3-[Q1N,Q2N]-[G1N,G2N]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT3-[Q1N,Q2N]-G[1,2]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT3-[Q1N,Q2N]-G[1,2]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT3-Q[1,2,5]-[G1N,G2N]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT3-Q[1,2,5]-[G1N,G2N]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT3-Q[1,2,5]-G[1,2]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT3-Q[1,2,5]-G[1,2]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT4-[Q1N,Q2N]-[G1N,G2N]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT4-[Q1N,Q2N]-[G1N,G2N]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT4-[Q1N,Q2N]-G[1,2]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT4-[Q1N,Q2N]-G[1,2]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT4-Q[1,2,5]-[G1N,G2N]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT4-Q[1,2,5]-[G1N,G2N]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT4-Q[1,2,5]-G[1,2]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT4-Q[1,2,5]-G[1,2]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT5-[Q1N,Q2N]-[G1N,G2N]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT5-[Q1N,Q2N]-[G1N,G2N]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT5-[Q1N,Q2N]-G[1,2]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT5-[Q1N,Q2N]-G[1,2]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT5-Q[1,2,5]-[G1N,G2N]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT5-Q[1,2,5]-[G1N,G2N]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT5-Q[1,2,5]-G[1,2]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT5-Q[1,2,5]-G[1,2]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT6-[Q1N,Q2N]-[G1N,G2N]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT6-[Q1N,Q2N]-[G1N,G2N]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT6-[Q1N,Q2N]-G[1,2]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT6-[Q1N,Q2N]-G[1,2]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT6-Q[1,2,5]-[G1N,G2N]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT6-Q[1,2,5]-[G1N,G2N]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT6-Q[1,2,5]-G[1,2]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT6-Q[1,2,5]-G[1,2]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT7-[Q1N,Q2N]-[G1N,G2N]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT7-[Q1N,Q2N]-[G1N,G2N]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT7-[Q1N,Q2N]-G[1,2]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT7-[Q1N,Q2N]-G[1,2]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT7-Q[1,2,5]-[G1N,G2N]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT7-Q[1,2,5]-[G1N,G2N]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT7-Q[1,2,5]-G[1,2]-[K1N,K2N]-P[20-50/1] |
| SL-BMSFAPT7-Q[1,2,5]-G[1,2]-K[1,2]-P[20-50/1] |
| SL-BMSFAPT8-[Q1N,Q2N]-[G1N,G2N]-[K1N,K2N]-P[20-35/1] |
| SL-BMSFAPT8-[Q1N,Q2N]-[G1N,G2N]-K[1,2]-P[20-35/1] |
| SL-BMSFAPT8-[Q1N,Q2N]-G[1,2]-[K1N,K2N]-P[20-35/1] |
| SL-BMSFAPT8-[Q1N,Q2N]-G[1,2]-K[1,2]-P[20-35/1] |
| SL-BMSFAPT8-Q[1,2,5]-[G1N,G2N]-[K1N,K2N]-P[20-35/1] |
| SL-BMSFAPT8-Q[1,2,5]-[G1N,G2N]-K[1,2]-P[20-35/1] |
| SL-BMSFAPT8-Q[1,2,5]-G[1,2]-[K1N,K2N]-P[20-35/1] |
| SL-BMSFAPT8-Q[1,2,5]-G[1,2]-K[1,2]-P[20-35/1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Surface Treatment | Cleaning Method | Block Size (mm) | Number of Circuits | Thread Size / Type | Mounting Hole Change | Pitch P (mm) | Pitch Standard / Configurable | Drawing Part G Thread Diameter M (Coarse) Selection [GM] 3 (M3) 4 (M4) | Drawing Part G Thread Diameter NPT Selection [G] | Drawing Part G Thread Diameter PT/PF | Drawing Part K Thread Diameter M (Coarse) Selection [KM] [KM] 3 (M3) | Drawing Part K Thread Diameter NPT Selection [K] | Drawing Part K Thread Diameter PT/PF | Drawing Part Q Thread Diameter M (Coarse) Selection [QM] 3 (M3) 4 (M4) | Drawing Part Q Thread Diameter NPT Selection [Q] | Drawing Part Q Thread Diameter PT/PF | Material Certificate: Surface Treatment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 4 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 5 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 4 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 5 | - | - | 1 ～ 5 | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 5 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | 1/4 [K2N] / 1/8 [K1N] | - | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 5 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | - | 1 ～ 2 | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 5 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 5 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | - | 1 ～ 2 | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 5 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 5 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | - | 1 ～ 2 | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 5 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 5 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | - | 1 ～ 2 | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 6 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | 1/4 [K2N] / 1/8 [K1N] | - | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 6 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | - | 1 ～ 2 | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 6 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 6 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | - | 1 ～ 2 | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 6 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 6 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | - | 1 ～ 2 | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 6 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 6 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | - | 1 ～ 2 | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 7 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | 1/4 [K2N] / 1/8 [K1N] | - | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 7 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | - | 1 ～ 2 | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 7 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 7 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | - | 1 ～ 2 | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 7 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 7 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | - | 1 ～ 2 | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 7 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 7 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | - | 1 ～ 2 | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 8 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 35 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | 1/4 [K2N] / 1/8 [K1N] | - | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 8 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 35 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | - | 1 ～ 2 | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 8 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 35 | Configurable Type | - | - | 1 ～ 2 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 8 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 35 | Configurable Type | - | - | 1 ～ 2 | - | - | 1 ～ 2 | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 8 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 35 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 8 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 35 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | - | 1 ～ 2 | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 8 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 35 | Configurable Type | - | - | 1 ～ 2 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 8 | Basic Thread [PT, M (Coarse) Thread] | NA (Through) | 20 ～ 35 | Configurable Type | - | - | 1 ～ 2 | - | - | 1 ～ 2 | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 2 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | 1/4 [K2N] / 1/8 [K1N] | - | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 2 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | - | 1 ～ 2 | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 2 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 2 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | - | 1 ～ 2 | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 2 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 2 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | - | 1 ～ 2 | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 2 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 2 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | - | 1 ～ 2 | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 3 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | 1/4 [K2N] / 1/8 [K1N] | - | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 3 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | - | 1 ～ 2 | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 3 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 3 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | - | 1 ～ 2 | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 3 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 3 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | - | 1 ～ 2 | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 3 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 3 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | - | 1 ～ 2 | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 4 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | 1/4 [K2N] / 1/8 [K1N] | - | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 4 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | - | 1 ～ 2 | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 4 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 4 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | - | 1 ～ 2 | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 4 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 4 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | - | 1 ～ 2 | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 4 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 4 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | - | 1 ～ 2 | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 5 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | 1/4 [K2N] / 1/8 [K1N] | - | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 5 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | - | 1 ～ 2 | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 5 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 5 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | - | 1 ～ 2 | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 5 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 5 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | - | 1 ～ 2 | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 5 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 5 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | - | 1 ～ 2 | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 6 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | 1/4 [K2N] / 1/8 [K1N] | - | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 6 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | - | 1 ～ 2 | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 6 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 6 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | - | 1 ～ 2 | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 6 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 6 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | - | 1 ～ 2 | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 6 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 6 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | - | 1 ～ 2 | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 7 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | 1/4 [K2N] / 1/8 [K1N] | - | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 7 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | - | 1 ～ 2 | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 7 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 7 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | - | 1 ～ 2 | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 7 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 7 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | - | 1 ～ 2 | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 7 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 7 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 50 | Configurable Type | - | - | 1 ～ 2 | - | - | 1 ～ 2 | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 8 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 35 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | 1/4 [K2N] / 1/8 [K1N] | - | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 8 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 35 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | - | 1 ～ 2 | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 8 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 35 | Configurable Type | - | - | 1 ～ 2 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 8 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 35 | Configurable Type | - | - | 1 ～ 2 | - | - | 1 ～ 2 | - | 1/4 [Q2N] / 1/8 [Q1N] | - | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 8 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 35 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 8 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 35 | Configurable Type | - | 1/4 [G2N] / 1/8 [G1N] | - | - | - | 1 ～ 2 | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 8 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 35 | Configurable Type | - | - | 1 ～ 2 | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | 1 ～ 5 | Clear Anodize | ||
- | 1 Piece(s) | 6 Day(s) or more | Clear Anodize | Degreasing | 30×30 | 8 | Basic Thread [PT, M (Coarse) Thread] | T (Tapped) | 20 ～ 35 | Configurable Type | - | - | 1 ～ 2 | - | - | 1 ～ 2 | - | - | 1 ～ 5 | Clear Anodize |
Loading...
Basic Information
| Shape | Lateral Through Hole, Upper Hole | Environmentally friendly | RoHS Compliant (10 Substances) | Material | Aluminum Alloy |
|---|---|---|---|---|---|
| Characteristics/Applications | Clean Washed | Application | Pneumatic | Material Certificate | Available |
| Material Certificate: Material | Aluminum Alloy |
Specification/Dimensions
-
Surface Treatment
- Not Provided
- Clear Anodize
-
Block Size(mm)
- 20×20
- 30×30
- 40×40
- 60×60
-
Number of Circuits
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
-
Thread Size / Type
-
Mounting Hole Change
- NA (Through)
- Not Specified (Through)
- Not specified (Front surface counterbore)
- T (Tapped)
- ZB (Back Surface Counterbore)
- ZT (Counterbore Tapped)
-
Pitch P(mm)
-
Pitch Standard / Configurable
- Configurable Type
- Standard Type
-
Drawing Part G Thread Diameter M (Coarse) Selection [GM] 3 (M3) 4 (M4)
-
Drawing Part G Thread Diameter NPT Selection [G]
- 1/4 [G2N]
- 1/8 [G1N]
-
Drawing Part G Thread Diameter PT/PF
-
Drawing Part K Thread Diameter M (Coarse) Selection [KM] [KM] 3 (M3)
-
Drawing Part K Thread Diameter NPT Selection [K]
- 1/4 [K2N]
- 1/8 [K1N]
-
Drawing Part K Thread Diameter PT/PF
-
Drawing Part Q Thread Diameter M (Coarse) Selection [QM] 3 (M3) 4 (M4)
-
Drawing Part Q Thread Diameter NPT Selection [Q]
- 1/4 [Q2N]
- 1/8 [Q1N]
-
Drawing Part Q Thread Diameter PT/PF
-
type
- SH-BMSF
- SH-BMSFA
- SH-BMSFAP
- SH-BMSFB
- SH-BMSFC
- SH-BMSFCA
- SH-BMSFCAP
- SH-BMSFCP
- SH-BMSFL
- SH-BMSFLA
- SH-BMSFLAP
- SH-BMSFLP
- SH-BMSFP
- SH-G-BMSF
- SH-G-BMSFA
- SH-G-BMSFAP
- SH-G-BMSFB
- SH-G-BMSFC
- SH-G-BMSFCA
- SH-G-BMSFCAP
- SH-G-BMSFCP
- SH-G-BMSFL
- SH-G-BMSFLA
- SH-G-BMSFLAP
- SH-G-BMSFLP
- SH-G-BMSFP
- SHD-BMSF
- SHD-BMSFB
- SHD-BMSFC
- SHD-BMSFCP
- SHD-BMSFL
- SHD-BMSFLP
- SHD-BMSFP
- SHD-G-BMSF
- SHD-G-BMSFB
- SHD-G-BMSFC
- SHD-G-BMSFCP
- SHD-G-BMSFL
- SHD-G-BMSFLP
- SHD-G-BMSFP
- SL-BMSF
- SL-BMSFA
- SL-BMSFAP
- SL-BMSFB
- SL-BMSFC
- SL-BMSFCA
- SL-BMSFCAP
- SL-BMSFCP
- SL-BMSFL
- SL-BMSFLA
- SL-BMSFLAP
- SL-BMSFLP
- SL-BMSFP
- SL-G-BMSF
- SL-G-BMSFA
- SL-G-BMSFAP
- SL-G-BMSFB
- SL-G-BMSFC
- SL-G-BMSFCA
- SL-G-BMSFCAP
- SL-G-BMSFCP
- SL-G-BMSFL
- SL-G-BMSFLA
- SL-G-BMSFLAP
- SL-G-BMSFLP
- SL-G-BMSFP
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 6 Day(s) or Less
- 9 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Manifold Blocks - Hydraulic / Pneumatic - Lateral and Vertical Through Hole
- Manifold Blocks - Hydraulic / Pneumatic - Lateral Through Hole, Upper Hole
- Manifold Blocks - Pneumatic - Lateral and Vertical Through Hole / Lateral Through Hole, Upper Hole
- Manifold Blocks - Pneumatic - Double - BMBW□ Series
- [Clean & Pack]Terminal Block - Pneumatic, L-Shaped Hole Type
- [Clean & Pack]Manifold - Hydraulic / Pneumatic, 2 Circuits, 3-Way Type
- Terminal block, VABM Series
- Manifold Block
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy