[Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

[Clean & Pack]Panel Brackets - Aluminum Long (Part Numbers)

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■Part Number for Clean & Pack Products

· Degreasing (Anti-rust single packing)	: Part Number SL-□□
· Precision cleaning (Degassing double packing)	: Part Number SH-□□
· Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

The gap between the extrusion and panel can be filled. It can also be used for reinforcements.

(i)Caution

Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers

SL-HCBAL6
SH-HCBAL6
SL-HCBAL6S
SH-HCBAL6S
SL-HCBAL8
SH-HCBAL8

* When Alteration CTW45 is specified, the M5 Mounting Hole will be provided at 20 mm from the end.

Type	[M] Material	[S] Surface Treatment	Cleaning Method
			Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-HCBAL	A6063S−T5	Anodize	Degreasing	General environment	Anti-rust packing	General environment
SH-HCBAL			Precision cleaning	Class 1,000	Degassing double packing	Class 10

[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ]See the details of precision cleaning and electrolytic polishing shown at the bottom of the

specification table.

Specification Table

Part Number	—	L
SL-HCBAL6	—	1000

Part Number		L 1 mm Increments	Difference between the Extrusion Side and Attachment Face	S	Applicable Screws and Nuts
Type	No.				Screw	Quantity	Nut	Quantity
SL-HCBAL SH-HCBAL	6	50 to 2000	5	10	SCB6－12	2	HNTTSN6－6	2
	6S		3	12
	8^*		5^*2	15	SCB6－15		HNTTSN8－6

[ ! ]8^* is also used as 8−45[ ! ] 5^*2 is for 40 square aluminum extrusions
[ ! ] Use Panel Mounting Screws for panel mounting.

Alterations

Part Number	—	L	—	(CTW45·MH)
SL-HCBAL	—	500	—	CTW45
SH-HCBAL	—	700	—	MH

Alteration	Code	Spec.
Panel Brackets Aluminum - Long Cut 45 Degrees on Upper Slot	CTW45	Panel support bracket aluminum long type cut at both ends at 45 degrees. 　　　 ■ Mounting Example
One Mounting Hole Addition	MH	Adds one M5 mounting hole on the middle of L Dimensions.

[!]The cut surface will be sharp. Please be careful not to scratch your hands.

Product Overview (Panel Clamp Overview)

Use this when you want to reinforce the panel.
It is possible to add a hole in the middle and attach Panel Brackets for reinforcement.
Panel Brackets are tapped hole machined.

■Panel Brackets Type

Product Name	Panel Brackets				Panel Clamps Bracket
Product Name	Plastic	Aluminum Type	Length Configuration Aluminum - Long	Steel, Stainless Steel	Panel Clamps Bracket
Image
App. Example
Descriptions	Easy installation by inserting the T-shaped stopping part into the slot and turning 90. Applicable to both 3 mm and 5 mm thick panels.	An aluminum type Panel Bracket that is fixed to the extrusion using screws and nuts.	The clearance between the extrusion and panel can be filled. You can also use it for reinforcements.	Steel, stainless steel panel brackets.	Easy installation by inserting the T-shaped stopping part into the slot and turning 90. Applicable to both 3 mm and 5 mm thick panels. Hole machining on the panel is not required.

App. Example

The gap between the extrusion and panel can be filled.
Use for reinforcements also.

Bracket Mounting

■ Overview

Mounting panels on brackets within the extrusions.
This results in aesthetically good appearance, and makes for easy install/remove of the panels. Recommended for Safety Covers, etc.
When using eccentric bracket HBLTH5, it will be flush with the extrusion.
It is possible to install a panel with a length of 5 mm or more, but it will protrude from the aluminum extrusion surface.

App. Example	Precision equipment frames, production equipment for food and medicine improvement
Ease of Panel Removal	×
Gap between Panels and Extrusions	No
Appearance	Excellent
Panel Size Calculations	Calculations needed for the corners^*4
Panel Thickness (mm)	3 mm (5/6 Series)
Panel Thickness (mm)	5 mm (5/6/8/8-45 Series)

■Mounting Method

(1) Tapping is specified for the brackets. (Example: HBLTS6-C)This must be specified when ordering the bracket.
(2) Fasten the panel with the cover mounting screws.
* If the panel is large, you can strengthen it by using a panel bracket in the middle.

How to Select Parts

Component	(1) Aluminum extrusion	(2) Aluminum extrusion	(3) Bracket	(4) Screw	(5) Panel	((6) Panel Support Bracket)
Component
Part Number Example	HFS6-3030-400	HFS6-3030-340	HBLFSN6-C-SET	HCBM5-8	ACAE4H-336-336 -5-F316-G316-N5	HCBA6-SET
Quantity	2	2	4	4	1	As needed

(1) Aluminum extrusion: No Alterations
(2) Aluminum Extrusion: No Alterations
(3) Bracket: Tapping (M5)
(4) Screw: Match the hole diameter of the bracket.
(5) Panel: Hole Machining (M5)

Size

Leave a clearance of 1 mm on each side.
Panel width (A) = Frame internal dimension (L1) - Clearance (2 mm)
Panel width (B) = Frame internal dimension (L2) - Clearance (2 mm)

Thickness

·For M5 (5 Series) Extrusions: 3 mm Thick
·For M6 and M8 (6, 8(-45) Extrusions: 5 mm Thick

Example) Panel Size Calculations
A = L1 (400-30-30)-Clearance both ends (2 mm) = 338 mm
B = L2 (340)-Clearance both ends (2 mm) = 338 mm
5 mm thickness, 4 holes (M5)
↓
AXAE4H-336-336-5-F316-G316-N5

(6) Panel Brackets
Depending on the size of the panel, it is possible to add a hole in the middle and attach Panel Brackets for reinforcement.
Panel Brackets are tapped hole machined.

Cleaning Process

· Degreasing (Part Number: SL-□□)

* Stainless steel products may be used with alkaline hot pure water. There is no change in cleanliness.
* If the surface treatment is low-temperature black chrome plating, IPA cleaning will be applied.

Working Environment: General environment
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water cleaning		Oil-free Compressor Used		Anti-rust single packing

· Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		Electrolytic polishing in an electrolytic polishing tank according to the material		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

Depending on some products and dimensions,
packaging type may vary.

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
SL-HCBAL6-[50-800/1]
SL-HCBAL6S-[50-800/1]
SL-HCBAL8-[50-800/1]

Standard Unit Price	Minimum order quantity	Days to Ship	Cleaning Method	Extrusion No.	Difference between the Extrusion Side and Attachment Face	L (mm)
-	1 Piece(s)	5 Day(s) or more	Degreasing	6	5	50 ～ 800
-	1 Piece(s)	5 Day(s) or more	Degreasing	6	3	50 ～ 800
-	1 Piece(s)	5 Day(s) or more	Degreasing	8	5	50 ～ 800

Basic Information

Material	Aluminum	Material	A6063S-T5	Surface Treatment	Anodize

Configure

3 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Extrusion No.
- 6
- 8
Clear
Difference between the Extrusion Side and Attachment Face
- 3
- 5
Clear
L(mm)
[50-800/1mm Unit(s)]
Clear
type
- SH-HCBAL
- SL-HCBAL
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

5 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

[Clean & Pack]Panel Brackets - Aluminum Long (Part Numbers)

(i)Caution

Specification Table

Alterations

Product Overview (Panel Clamp Overview)

App. Example

Bracket Mounting

How to Select Parts

Part Number

Basic Information

Configure

Specification/Dimensions

Extrusion No.

Difference between the Extrusion Side and Attachment Face

L(mm)

type

Cleaning Method

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm