[Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

[Clean & Pack]Slot Covers - Aluminum Type

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■Part Number for Clean & Pack Products

· Degreasing (Anti-rust single packing)	: Part Number SL-□□
· Precision cleaning (Degassing double packing)	: Part Number SH-□□
· Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Aluminum slot cover. Recommended when the same color as the frame is desired.

(i)Caution

Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information

Slot Covers (Aluminum Low Profile)

For HFS5 Series
SL-HSCZ5
SH-HSCZ5

For HFS6 Series
SL-HSCZ6
SH-HSCZ6

For HFS8 Series
SL-HSCZ8
SH-HSCZ8

For HFS8-45 Series
SL-HSCZ845
SH-HSCZ845

Slot Covers (Aluminum)

For HFS5 Series
SL-HSCM5
SH-HSCM5

For HFS6 Series
SL-HSCM6
SH-HSCM6

For HFS8, HFS8-45 Series
SL-HSCM8
SH-HSCM8

Type	[M] Material	[S] Surface Treatment	Cleaning Method
Type	[M] Material	[S] Surface Treatment	Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-HSCM	Aluminum (A6063S−T5)	Anodize	Degreasing	General environment	Anti-rust packing	General environment
SH-HSCM			Precision cleaning	Class 1,000	Degassing double packing	Class 10
SL-HSCZ			Degreasing	General environment	Anti-rust packing	General environment
SH-HSCZ			Precision cleaning	Class 1,000	Degassing double packing	Class 10

[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ]See the details of precision cleaning and electrolytic polishing shown at the bottom of the

specification table.

Specification Table

Part Number	—	Length
SL-HSCM5	—	100
SH-HSCZ5	—	100

■Configurable Length (Aluminum Low Profile)

Part Number		Length 1 mm Increments	Applicable Extrusion (Series)	Mass g/m
SL-HSCZ	5	50 to 800	5 Series	45
	6		6 Series	63
	8		8 Series	103
	845		8−45 Series	105
SH-HSCZ	5	50 to 800	5 Series	45
	6		6 Series	63
	8		8 Series	103
	845		8−45 Series	105

* The length can be specified in increments of 1 mm.

■Configurable Length (Aluminum)

Part Number		Length 1 mm Increments	Applicable Extrusion (Series)	Mass g/m
SL-HSCM SH-HSCM	5	50 to 800	5 Series	60
	6		6 Series	69
	8		8 Series	126
			8−45 Series

* The length can be specified in increments of 1 mm.

Cleaning Process

· Degreasing (Part Number: SL-□□)

* Stainless steel products may be used with alkaline hot pure water. There is no change in cleanliness.
* If the surface treatment is low-temperature black chrome plating, IPA cleaning will be applied.

Working Environment: General environment
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water cleaning		Oil-free Compressor Used		Anti-rust single packing

· Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		Electrolytic polishing in an electrolytic polishing tank according to the material		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

Depending on some products and dimensions,
packaging type may vary.

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
SL-HSCM5-[50-800/1]
SL-HSCM6-[50-800/1]
SL-HSCM8-[50-800/1]
SL-HSCZ5-[50-800/1]
SL-HSCZ6-[50-800/1]
SL-HSCZ8-[50-800/1]
SL-HSCZ845-[50-800/1]

Standard Unit Price	Minimum order quantity	Days to Ship	Extrusion Series	Cleaning Method	Compatible Frame (Series)	Specifications	Length (mm)
-	1 Piece(s)	6 Day(s) or more	MISUMI 5 Series (6 mm Groove Width)	Degreasing	5 Series	Standard Type	50 ～ 800
-	1 Piece(s)	6 Day(s) or more	MISUMI 6 Series (8 mm Groove Width)	Degreasing	6 Series	Standard Type	50 ～ 800
-	1 Piece(s)	6 Day(s) or more	MISUMI 8 Series (10 mm Groove Width)	Degreasing	8 Series / 8-45 Series	Standard Type	50 ～ 800
-	1 Piece(s)	6 Day(s) or more	MISUMI 5 Series (6 mm Groove Width)	Degreasing	5 Series	Thin Type	50 ～ 800
-	1 Piece(s)	6 Day(s) or more	MISUMI 6 Series (8 mm Groove Width)	Degreasing	6 Series	Thin Type	50 ～ 800
-	1 Piece(s)	6 Day(s) or more	MISUMI 8 Series (10 mm Groove Width)	Degreasing	8 Series	Thin Type	50 ～ 800
-	1 Piece(s)	6 Day(s) or more	MISUMI 8-45 Series (10 mm Groove Width)	Degreasing	8-45 Series	Thin Type	50 ～ 800

App. Example

·Example of Pre-Assembling Insertion

·Example of Post-Assembling Insertion

[!] Possible to install on assembled extrusion frames. (Insert them by using a wooden hammer or a resin hammer.)
　

Basic Information

Material	A6063S-T5	Color	Silver	Surface Treatment	Anodize

Configure

7 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Extrusion Series
- MISUMI 5 Series (6 mm Groove Width)
- MISUMI 6 Series (8 mm Groove Width)
- MISUMI 8 Series (10 mm Groove Width)
- MISUMI 8-45 Series (10 mm Groove Width)
Clear
Compatible Frame (Series)
- 5 Series
- 6 Series
- 8 Series
- 8-45 Series
- 8 Series / 8-45 Series
Clear
Specifications
- Standard Type
- Thin Type
Clear
Length(mm)
[50-800/1mm Unit(s)]
Clear
type
- SH-HSCM
- SH-HSCZ
- SL-HSCM
- SL-HSCZ
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

[Clean & Pack]Slot Covers - Aluminum Type

(i)Caution

Specification Table

Part Number

App. Example

Basic Information

Configure

Specification/Dimensions

Extrusion Series

Compatible Frame (Series)

Specifications

Length(mm)

type

Cleaning Method

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm