[Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

[Clean & Pack]5 Series (Slot Width 6 mm) - For 1 Slot, Extruded Ultra Thick Brackets (Perpendicularly Machined Type) (SL-HBKUS5-SST)

Volume Discount

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■ Part Number for Clean & Pack Products

· Degreasing (Anti-rust single packing)	: Part Number SL-□□
· Precision cleaning (Degassing double packing)	: Part Number SH-□□
· Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■ Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Numbers of bolts are the same as HBKTS5. Extrusions can be connected more securely. Perpendicularly Machined.

(i)Caution

Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Part Number

Configured Part Number is shown.

SL-HBKUS5-SST

Drawing/Specifications
3D Preview
Part Numbers

Perpendicularity K: 0.06

Protrusions are provided on the bracket bottom to be inserted into aluminum extrusion slots.

5 Series (Slot Width 6 mm) - For 1 Slot, Extruded Ultra Thick Brackets (Perpendicularly Machined): Related Image

Part Number	[ M ] Material	[ S ] Surface treatment	Cleaning Method
Part Number	[ M ] Material	[ S ] Surface treatment	Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-HBKUS5	A6N01SS−T5	Anodize	Degreasing	General environment	Anti-rust packing	General environment
SH-HBKUS5		Anodize	Precision cleaning	Class 1,000	Degassing double packing	Class 10
SL-HBKUSB5		Black Anodize	Degreasing	General environment	Anti-rust packing	General environment
SH-HBKUSB5		Black Anodize	Precision cleaning	Class 1,000	Degassing double packing	Class 10

[!] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[!] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the

specification table.

Specification Table

Part Number

SL-HBKUS5

Part Number	Mass	Applicable Screw, T Nut				Allowable Load
	(g)	Bolt	Quantity	T Nut	Quantity	(N)
SL-HBKUS5	31	SCB5-14	2	HNTTBS5-5	2	833
SH-HBKUS5
SL-HBKUSB5^*
SH-HBKUSB5^*

Alterations

Part Number	—	(C·SST·SSU·SSP)
SL-HBKUS5	—	SST
SL-HBKUS5	—	C-SST

Alterations	Code	Spec.	Applicable Bracket
			NBLTS5
Mounting Hole Alteration for Cover	C	Adds taps on a bracket for cover mounting. (M5 on Both Sides) (Mounting screw HCBM)	HBLTS5
			HBLTS5−4
			CHBLTS5
			HBLTV5
			HBLTVB5
			HBKTS5
			NBLUS5
			HBLUS5
			HBKUS5
			HBLTH5
			HBLTHB5
			HBLTSW5
			HBLTVW5
			HBLTF5

Alterations

Code

Spec.

Applicable Bracket

Applicable Bolts
and Nuts Set

SST
(Stainless Steel)
SSU
(Pre-Assembly Insertion
Spring Nut
Stainless Steel)
SSP
(Post-Assembly Insertion
Spring Nut
Stainless Steel)

Applicable screws and nuts for fixing the brackets on extrusions come in a set.

(Example) When HBLTS5 is specified

	Bolt		Nut
Code	Part Number	Quantity	Part Number	Quantity
SST	SCB5－10	2	HNTTBS5－5	2
SSU	SCB5－10		SHNTU5－5
SSP	SCB5－10		SHNTP5－5
[ ! ] When specifying other than HBLTS5, check for the applicable screws and nuts respectively.

—

NBLTS5

HBLTS5

HBLTS5−4

HBLTSB5

CHBLTS5

HBLTV5

HBLTVB5

HBKTST5

HBKTS5

HBKTSB5

NBLUS5

HBLUS5

HBKUS5

HBKUSB5

HBLTH5

HBLTHB5

HBLTSW5

HBLTVW5

HBLTF5

[ ! ] Screws for black anodized brackets are made of HCBMTB (Trivalent Chromate Black).
[ ! ] The part numbers are those of the products before cleaning.

Alteration Details

■Mounting Hole Alteration for Cover (-C)

M5 tapped holes can be added on both sides.
Alteration Part Number Example: HBKUS5-C

■Set of applicable Screws and Nuts Details

Alteration part number	Bolt		Nut
Alteration part number	Part Number	Material	Type	Part Number	Material	Stopper
SST	SCB5-14	Stainless Steel	Pre-Assembly	HNTTBS5-5	Stainless Steel	None
SSU	SCB5-14	Stainless Steel	Pre-Assembly	SHNTU5-5	Stainless Steel	Provided
SSP	SCB5-14	Stainless Steel	Post-Assembly	SHNTP5-5	Stainless Steel	Provided

App. Example

This product is the Perpendicularly Machined Type Extruded Brackets with tabs to fit the slot of extrusions.
Since the tabs stop rotating the brackets when tightening, work efficiency is improved.

Perpendicularity is guaranteed.
HBKUS5, HBKUSB5: Perpendicularity 0.06
For a perpendicularity of 0.03, use Thick Bracket (HBKTST5).

■Difference between Extruded Brackets and Tabbed Brackets

[This Product]Extruded Brackets	·The extruded brackets are made of A6N01SS-T5, manufactured by aluminum extrusion. Surfaces are anodized. ·Suitable when appearance well balanced with the extrusions is desired. Designed to prevent dust from building up. ·Suitable for the areas where the strength is required because it is stronger than the tabbed brackets.
Tabbed Brackets	·The tabbed brackets are molded brackets made of material ADC12. Since it is not basically anodized, it is less expensive than extruded brackets of the same size. ·Since the tabs stop rotating the brackets when tightening, work efficiency is improved. ·Various types of brackets with additional functions are available.

Technical Information

■How to Specify Allowable Load of Bracket

This represents the allowable load per bracket for the extrusion assembly structured by bridging a beam extrusion between two vertical extrusions and then, attaching a bracket just below the bottom face of each end of the beam extrusion.
Allowable Load here means the load under which the bracket can stays at its position (without fracturing or sliding), after all of its mounting holes are fixed with screws.

Cleaning Process

· Degreasing (Part Number: SL-□□)

* Stainless steel products may be used with alkaline hot pure water. There is no change in cleanliness.
* If the surface treatment is low-temperature black chrome plating, IPA cleaning will be applied.

Working Environment: General environment
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water cleaning		Oil-free Compressor Used		Anti-rust single packing

· Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		Electrolytic polishing with an electrolytic polishing layer according to the material		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

Depending on some products and dimensions,
packaging type may vary.

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
SL-HBKUS5-SST

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Cleaning Method	Surface Treatment	Mounting Hole Alteration for Covers	Accessory
	MYR 22.90	1 Piece(s)	Available	6 Day(s) or more	Degreasing	Anodizing	N/A	SST (Stainless steel bolt / nut set)

Basic Information

Bracket Type	Extruded Brackets	Environmentally Friendly	RoHS compliant (10 substances)	Properties / applications	Clean washing
Tab Position	Tabbed at Both Sides	Compatible Extrusion Width(mm)	20	Compatible No. of Slots	1 Slot
Perpendicularity	With standard	Series	MISUMI Brackets for 5 Series (Extrusion Slot Width 6mm)	Additional Functions (Extruded Bracket)	Standard
Material	A6N01SS-T5	Extrusion No.	5	Extrusion Size	For 20/25/40
Bracket Type	Ultra Thick Brackets (with Tabs)	Applicable Screws	M5 bolt	Number of Extrusion Connection Holes	2

Please check the type/dimensions/specifications of the part SL-HBKUS5-SST in the [Clean & Pack]5 Series (Slot Width 6 mm) - For 1 Slot, Extruded Ultra Thick Brackets (Perpendicularly Machined Type) series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

type
- SH-HBKUS5
- SH-HBKUSB5
- SL-HBKUS5
- SL-HBKUSB5
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
Clear
Surface Treatment
- Anodizing
- Black anodizing
Clear
Mounting Hole Alteration for Covers
- C (Cover mounting tapping)
- N/A
Clear
Accessory
- N/A
- SSP (Stainless steel bolt / post-assembly insertion spring nut set)
- SST (Stainless steel bolt / nut set)
- SSU (Stainless steel bolt / pre-assembly insertion spring nut set)
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
SH-HBKUS5-C-SSP
SH-HBKUS5-C-SST
SH-HBKUS5-C-SSU
SH-HBKUS5-SSP
SL-HBKUS5-SSU
SL-HBKUSB5

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Cleaning Method	Surface Treatment	Mounting Hole Alteration for Covers	Accessory
MYR 27.63	1 Piece(s)	Available	6 Day(s) or more	Precision Cleaning	Anodizing	C (Cover mounting tapping)	SSP (Stainless steel bolt / post-assembly insertion spring nut set)
MYR 24.98	1 Piece(s)	Available	6 Day(s) or more	Precision Cleaning	Anodizing	C (Cover mounting tapping)	SST (Stainless steel bolt / nut set)
MYR 28.74	1 Piece(s)	Available	6 Day(s) or more	Precision Cleaning	Anodizing	C (Cover mounting tapping)	SSU (Stainless steel bolt / pre-assembly insertion spring nut set)
MYR 27.30	1 Piece(s)	Available	6 Day(s) or more	Precision Cleaning	Anodizing	N/A	SSP (Stainless steel bolt / post-assembly insertion spring nut set)
MYR 27.30	1 Piece(s)	Available	6 Day(s) or more	Degreasing	Anodizing	N/A	SSU (Stainless steel bolt / pre-assembly insertion spring nut set)
MYR 25.57	1 Piece(s)	Available	6 Day(s) or more	Degreasing	Black anodizing	N/A	N/A

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

[Clean & Pack]5 Series (Slot Width 6 mm) - For 1 Slot, Extruded Ultra Thick Brackets (Perpendicularly Machined Type) (SL-HBKUS5-SST)

(i)Caution

Specification Table

Alterations

Alteration Details

App. Example

Technical Information

Part Number

Basic Information

Configure

Specification/Dimensions

type

Cleaning Method

Surface Treatment

Mounting Hole Alteration for Covers

Accessory

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm