[Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

[Clean & Pack]8-45 Series (Slot Width 10 mm) - For 1 Slot, Extruded Ultra Thick Brackets for 50 Square (SL-NBLUW8-50-SSU)

Volume Discount

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■ Part Number for Clean & Pack Products

· Degreasing (Anti-rust single packing)	: Part Number SL-□□
· Precision cleaning (Degassing double packing)	: Part Number SH-□□
· Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■ Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Extruded ultra thick bracket to connect 8-45 Series 50 Square Extrusions.

(i)Caution

Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Part Number

Configured Part Number is shown.

SL-NBLUW8-50-SSU

Drawing/Specifications
3D Preview
Part Numbers

For 50 Square

[ ! ] Both sides and bolt holes of SL-NBLUW8-50 and SH-NBLUW8-50 are not anodized.

Part Number	[ M ] Material	[ S ] Surface treatment	Cleaning Method
Part Number	[ M ] Material	[ S ] Surface treatment	Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-NBLUW8−50	A6063S−T5	Anodize	Degreasing	General environment	Anti-rust packing	General environment
SH-NBLUW8−50	A6063S−T5		Precision cleaning	Class 1,000	Degassing double packing	Class 10
SL-HBLUW8−50	A6N01SS−T5		Degreasing	General environment	Anti-rust packing	General environment
SH-HBLUW8−50	A6N01SS−T5		Precision cleaning	Class 1,000	Degassing double packing	Class 10

[!] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[!] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the

specification table.

Specification Table

Part Number

SL-NBLUW8−50

SH-HBLUW8−50

Part Number	Mass	Applicable Extrusion	Applicable Screw, T Nut				Allowable Load
	(g)	Series	Bolt	Quantity	T Nut	Quantity	(N)
SL-NBLUW8−50	223	HFS8−5050	SCB8-15	2	HNTTSN8-8	4	2793
			SCB8-25
SH-NBLUW8−50		HFS8−5050	SCB8-15
			SCB8-25
SL-HBLUW8−50		HFS8−5050	SCB8-15
			SCB8-25
SH-HBLUW8−50		HFS8−5050	SCB8-15
			SCB8-25

Alterations

Part Number	—	(C·SST·SSU·SSP)
SL-HBLUW8-50	—	SST
SL-HBLUW8-50	—	C-SST

Alterations	Code	Spec.	Applicable Bracket
Mounting Hole Alteration for Cover	C	Adds taps on a bracket for cover mounting. (M5 on Both Sides) (Mounting Screw HCBM) * Tapping Direction: For HBLTS845−6□, tapping is only applied on the narrow side of the offset.	HBLTSW8
			HBLTS845−6 L*
			HBLTS845−6R*
			HBLTS8−50
			HBLUW8−50
			HBLUW8−60

Alterations

Code

Spec.

Applicable Bracket

Applicable Screws and Nuts Set

SST
(Stainless Steel)
SSU
(Pre-Assembly Insertion
Spring Nut
Stainless Steel)
SSP
(Post-Assembly Insertion
Spring Nut
Stainless Steel)

Applicable screws and nuts for fixing the brackets on extrusions come in a set.

(Example) When HBLTSW8 is specified

	Bolt		Nut
Code	Part Number	Quantity	Part Number	Quantity
SST	SCB8－20	4	HNTTSN8－8	4
SSU	SCB8－20		SHNTU8－8
SSP	SCB8－20		SHNTP8－8

[ ! ] When specifying other than HBLTSW8, check for the applicable screws and nuts respectively.

—

HBLTSW8

HBLTS845−6 L

HBLTS845−6R

HBLTS8−50

NBLUW8−50

HBLUW8−50

NBLUW8−60

HBLUW8−60

[ ! ] The part numbers are those of the products before cleaning.

Alteration Details

■Mounting Hole Alteration for Cover (-C)

M5 tapped holes can be added on both sides.
Alteration Part Number Example: HBLUW8-50-C

■Set of applicable Screws and Nuts Details

Alteration part number	Bolt			Bolt			Nut
Alteration part number	Part Number	Material	Qty.	Part Number	Material	Qty.	Type	Part Number	Material	Stopper	Qty.
SST	SCB8-15	Stainless Steel	2	SCB8-25	Stainless Steel	2	Pre-Assembly	HNTTSN8-8	Stainless Steel	None	4
SSU	SCB8-15	Stainless Steel	2	SCB8-25	Stainless Steel	2	Pre-Assembly	SHNTU8-8	Stainless Steel	Provided	4
SSP	SCB8-15	Stainless Steel	2	SCB8-25	Stainless Steel	2	Post-Assembly	SHNTP8-8	Stainless Steel	Provided	4

Product Features

Extruded Brackets: Manufactured by aluminum extrusion. Basically anodized.
Product Features: Compared to thick brackets, it has twice as many mounting holes on one side, allowing for a stronger connection.

Applicable Extrusion
8-45 Series 50 Square

Technical Information

■ Perpendicularity

Perpendicularity of Extruded Brackets is manufactured within ±1° tolerance based on JIS Standard H4100 Special Grade.
For applications where perpendicularly is important, use Perpendicularly Machined Type.
(For 8 Series and 8-45 Series: Perpendicularity 0.03 and 0.06 are available.)

■How to Specify Allowable Load of Bracket

This represents the allowable load per bracket for the extrusion assembly structured by bridging a beam extrusion between two vertical extrusions and then, attaching a bracket just below the bottom face of each end of the beam extrusion.
Allowable Load here means the load under which the bracket can stays at its position (without fracturing or sliding), after all of its mounting holes are fixed with screws.

■Mechanical Properties of Aluminum Extrusions (JIS Standard Reference)

Type	NBLUW8-50	HBLUW8-50
Material (JIS Symbol)	A6063S-T5	A6N01SS-T5
Tensile Strength (N/mm²)	155 or more	245 or more
Yield Stress (N/mm²)	110 or more	205 or more
Young's Modulus (N/mm²)	69972	69972
Brinell Hardness (HB)	88	88
Surface Treatment	Anodize 9 µm or more	Anodize 9 µm or more

Cleaning Process

· Degreasing (Part Number: SL-□□)

* Stainless steel products may be used with alkaline hot pure water. There is no change in cleanliness.
* If the surface treatment is low-temperature black chrome plating, IPA cleaning will be applied.

Working Environment: General environment
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water cleaning		Oil-free Compressor Used		Anti-rust single packing

· Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		Electrolytic polishing with an electrolytic polishing layer according to the material		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

Depending on some products and dimensions,
packaging type may vary.

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
SL-NBLUW8-50-SSU

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Perpendicularity	Cleaning Method	Material	Mounting Hole Alteration for Covers	Accessory
	MYR 53.19	1 Piece(s)	Available	6 Day(s) or more	No Standard	Degreasing	A6063S-T5	N/A	SSU (Stainless steel bolt / pre-assembly insertion spring nut set)

Basic Information

Bracket Type	Extruded Brackets	Environmentally Friendly	RoHS compliant (10 substances)	Properties / applications	Clean washing
Tab Position	Not Tabbed	Compatible Extrusion Width(mm)	50	Compatible No. of Slots	1 Slot
Series	MISUMI Brackets for 8-45 Series (Extrusion Slot Width 10mm)	Additional Functions (Extruded Bracket)	Standard	Surface Treatment	Anodizing
Extrusion No.	8	Extrusion Size	For 50 × 50	Bracket Type	Extruded Brackets for High-Strength Frames
Applicable Screws	M8 bolt	Number of Extrusion Connection Holes	4

Please check the type/dimensions/specifications of the part SL-NBLUW8-50-SSU in the [Clean & Pack]8-45 Series (Slot Width 10 mm) - For 1 Slot, Extruded Ultra Thick Brackets for 50 Square series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

type
- SH-HBLUW8-50
- SH-NBLUW8-50
- SL-HBLUW8-50
- SL-NBLUW8-50
Clear
Perpendicularity
- With standard
- No Standard
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
Clear
Material
- A6N01SS-T5
- A6063S-T5
Clear
Mounting Hole Alteration for Covers
- C (Cover mounting tapping)
- N/A
Clear
Accessory
- N/A
- SSP (Stainless steel bolt / post-assembly insertion spring nut set)
- SST (Stainless steel bolt / nut set)
- SSU (Stainless steel bolt / pre-assembly insertion spring nut set)
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
SH-HBLUW8-50
SH-HBLUW8-50-C
SH-HBLUW8-50-C-SSP
SH-HBLUW8-50-C-SST
SH-HBLUW8-50-C-SSU
SH-HBLUW8-50-SSP

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Perpendicularity	Cleaning Method	Material	Mounting Hole Alteration for Covers	Accessory
MYR 46.93	1 Piece(s)	Available	6 Day(s) or more	With standard	Precision Cleaning	A6N01SS-T5	N/A	N/A
MYR 46.54	1 Piece(s)	Available	6 Day(s) or more	With standard	Precision Cleaning	A6N01SS-T5	C (Cover mounting tapping)	N/A
MYR 67.29	1 Piece(s)	Available	6 Day(s) or more	With standard	Precision Cleaning	A6N01SS-T5	C (Cover mounting tapping)	SSP (Stainless steel bolt / post-assembly insertion spring nut set)
MYR 63.37	1 Piece(s)	Available	6 Day(s) or more	With standard	Precision Cleaning	A6N01SS-T5	C (Cover mounting tapping)	SST (Stainless steel bolt / nut set)
MYR 69.52	1 Piece(s)	Available	6 Day(s) or more	With standard	Precision Cleaning	A6N01SS-T5	C (Cover mounting tapping)	SSU (Stainless steel bolt / pre-assembly insertion spring nut set)
MYR 64.24	1 Piece(s)	Available	6 Day(s) or more	With standard	Precision Cleaning	A6N01SS-T5	N/A	SSP (Stainless steel bolt / post-assembly insertion spring nut set)

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

[Clean & Pack]8-45 Series (Slot Width 10 mm) - For 1 Slot, Extruded Ultra Thick Brackets for 50 Square (SL-NBLUW8-50-SSU)

(i)Caution

Specification Table

Alterations

Alteration Details

Product Features

Technical Information

Part Number

Basic Information

Configure

Specification/Dimensions

type

Perpendicularity

Cleaning Method

Material

Mounting Hole Alteration for Covers

Accessory

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm