[Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

[Clean & Pack]Thin Brackets For 8 Series (Slot Width 10 mm) (SH-HBLSS8-SSP)

Volume Discount

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■ Part Number for Clean & Pack Products

· Degreasing (Anti-rust single packing)	: Part Number SL-□□
· Precision cleaning (Degassing double packing)	: Part Number SH-□□
· Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■ Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Thin Extruded Brackets with space saving design. Alterations on hole positions are available.

(i)Caution

Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Part Number

Configured Part Number is shown.

SH-HBLSS8-SSP

Drawing/Specifications
3D Preview
Part Numbers
More Information

For 40 Square

For 80 Square

[ ! ] The hole positions can be changed.

Part Number		[ M ] Material	[ S ] Surface treatment	Cleaning Method
For 40 Square	For 80 Square	[ M ] Material	[ S ] Surface treatment	Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-HBLSS8	SL-HBLSD8	A6N01SS−T5	Anodize	Degreasing	General environment	Anti-rust packing	General environment
SH-HBLSS8	SH-HBLSD8		Anodize	Precision cleaning	Class 1,000	Degassing double packing	Class 10
SL-HBLSSB8	—		Black Anodize	Degreasing	General environment	Anti-rust packing	General environment
SH-HBLSSB8	—		Black Anodize	Precision cleaning	Class 1,000	Degassing double packing	Class 10

[!] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[!] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the

specification table.

Specification Table

Part Number

SL-HBLSS8

Part Number	Mass	Applicable Screw, T Nut				Allowable Load
	(g)	Bolt	Quantity	T Nut	Quantity	(N)
SL-HBLSS8	34	SCB8-15	2	HNTTSN8-8	2	1666
SH-HBLSS8
SL-HBLSSB8^*
SH-HBLSSB8^*
SL-HBLSD8	80		4		4	2352
SH-HBLSD8

Alterations

Part Number	—	(P·SST·SSU·SSP)
SL-HBLSD8	—	P
SL-HBLSD8	—	SST
SL-HBLSD8	—	P-SST

Alteration	Code	Spec.	Applicable Bracket
Thin Brackets Hole Position Change	P	Changes the screw-mounting hole position for Thin Brackets, HBLSD8.	HBLSD8

Alterations

Code

Spec.

Applicable Bracket

Applicable Bolts
and Nuts Set

SST
(Stainless Steel)
SSU
(Pre-Assembly Insertion
Spring Nut
Stainless Steel)
SSP
(Post-Assembly Insertion
Spring Nut
Stainless Steel)

Applicable bolts and nuts for fixing the brackets on extrusions come in a set.

(Example) When HBLSS8 is specified

	Bolt		Nut
Code	Part Number	Quantity	Part Number	Quantity
SST	SCB8－15	2	HNTTSN8－8	2
SSU	SCB8－15		SHNTU8－8
SSP	SCB8－15		SHNTP8－8

[ ! ] When specifying other than HBLSS8, check for the applicable screws and nuts.
　

—

HBLSS8

HBLSSB8

HBLSD8

[ ! ] Screws for black anodized brackets are made of HCBMTB (Trivalent Chromate Black).
[ ! ] The part numbers are those of the products before cleaning.

Alteration Details

■Set of applicable Screws and Nuts Details

Alteration part number	Bolt		Nut
Alteration part number	Part Number	Material	Type	Part Number	Material	Stopper
SST	SCB8-15	Stainless Steel	Pre-Assembly	HNTTSN8-8	Stainless Steel	None
SSU	SCB8-15	Stainless Steel	Pre-Assembly	SHNTU8-8	Stainless Steel	Provided
SSP	SCB8-15	Stainless Steel	Post-Assembly	SHNTP8-8	Stainless Steel	Provided

■Thin Brackets Hole Position Alteration Type (-P)

Changes the screw-mounting hole position for Thin Brackets.

Point!
(1) Since the screws do not interfere with each other, each of the bracket side faces can be easily assembled vertically with the mating extrusion side face through the extrusion slot.

(2) Low cost and thin bracket have achieved space saving of installation areas.

Customers' Voices

The options for fastening methods have expanded.
The price is cheaper than similar products from other manufacturers, so I would like to purchase it again.
We are satisfied with the thin design, which allows us to fasten clearly.

Technical Information

■How to Specify Allowable Load of Bracket

This represents the allowable load per bracket for the extrusion assembly structured by bridging a beam extrusion between two vertical extrusions and then, attaching a bracket just below the bottom face of each end of the beam extrusion.
Allowable Load here means the load under which the bracket can stays at its position (without fracturing or sliding), after all of its mounting holes are fixed with screws.

■ Perpendicularity

Perpendicularity of Extruded Brackets is manufactured within ±1° tolerance based on JIS Standard H4100 Special Grade.

■Mechanical Properties of Aluminum Extrusions (JIS Standard Reference)

Material (JIS Symbol)	A6N01SS-T5
Tensile Strength (N/mm²)	245 or more
Yield Stress (N/mm²)	205 or more
Young's Modulus (N/mm²)	69972
Brinell Hardness (HB)	88
Surface Treatment	Anodize 9 µm or more

Cleaning Process

· Degreasing (Part Number: SL-□□)

* Stainless steel products may be used with alkaline hot pure water. There is no change in cleanliness.
* If the surface treatment is low-temperature black chrome plating, IPA cleaning will be applied.

Working Environment: General environment
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water cleaning		Oil-free Compressor Used		Anti-rust single packing

· Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		Electrolytic polishing with an electrolytic polishing layer according to the material		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

Depending on some products and dimensions,
packaging type may vary.

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
SH-HBLSS8-SSP

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Compatible Extrusion Width (mm)	Cleaning Method	Surface Treatment	Bracket Type	Accessory	Number of Extrusion Connection Holes
	MYR 27.71	1 Piece(s)	Available	6 Day(s) or more	40	Precision Cleaning	Anodizing	Thin Brackets	SSP (Stainless steel bolt / post-assembly insertion spring nut set)	2

Specifications / Overview

～For customers who are considering the hole staggered type (HBLSD8-P)～
For fastening the mating sides of aluminum extrusions.
MISUMI's first thin bracket with staggered screw mounting holes

* The following explanation is about the hole-staggered bracket "HBLSD8-P."

Do you have the following issues?

Issue 1	I want to design with a configuration where the 1 slot extrusions are parallel to each other and at a 90-degree angle.
Issue 2	When fastening 2 slots and 1 slot extrusions at a 90-degree angle in parallel, there was a concern that the only way to fasten them was to use a sheet metal plate on the back.
Issue 3	I want to fasten the sides of the extrusions economically and compactly

These issues are solved with Thin Brackets Hole Position Alteration Type.

Solution

Since the screws do not interfere with each other, each of the bracket side faces can be easily assembled vertically with the mating extrusion side face through the extrusion slot.

Solution

Low-cost. Furthermore, the space in the installation area has been saved due to thin brackets.

Product Features

* Using the narrowing down conditions,
select [Bracket: Thin Brackets Hole Position Alteration Type].

Customers’ Opinions

The options for fastening methods have expanded.

The price is cheaper than similar products from other manufacturers, so I would like to purchase it again.

We are satisfied with the thin design, which allows us to fasten clearly.

App. Example

■Features of HBLSD8-P (Thin Bracket Hole Position)
Staggered bolt mounting holes.
Since the bolts do not interfere with each other,
each of the bracket side faces can be easily assembled vertically with the mating extrusion side face through the extrusion slot.

Basic Information

Bracket Type	Thin Brackets	Environmentally Friendly	RoHS compliant (10 substances)	Properties / applications	Clean washing
Tab Position	Not Tabbed	Perpendicularity	No Standard	Series	MISUMI Brackets for 8 Series (Extrusion Slot Width 10mm)
Material	A6N01SS-T5	Extrusion No.	8	Extrusion Size	for 40・80
Mounting Hole Alteration for Covers	N/A	Applicable Screws	M8 bolt

Please check the type/dimensions/specifications of the part SH-HBLSS8-SSP in the [Clean & Pack]Thin Brackets For 8 Series (Slot Width 10 mm) series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

type
- SH-HBLSD8
- SH-HBLSS8
- SH-HBLSSB8
- SL-HBLSD8
- SL-HBLSS8
- SL-HBLSSB8
Clear
Compatible Extrusion Width(mm)
40

80
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
Clear
Surface Treatment
- Anodizing
- Black anodizing
Clear
Bracket Type
Thin Brackets

Thin BracketsChangeable Hole Position Type
Clear
Accessory
- N/A
- SSP (Stainless steel bolt / post-assembly insertion spring nut set)
- SST (Stainless steel bolt / nut set)
- SSU (Stainless steel bolt / pre-assembly insertion spring nut set)
Clear
Number of Extrusion Connection Holes
- 2
- 4
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
SH-HBLSD8-P-SST
SH-HBLSD8-P-SSU
SH-HBLSD8-SSP
SH-HBLSS8-SST
SH-HBLSS8-SSU
SH-HBLSSB8

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Compatible Extrusion Width (mm)	Cleaning Method	Surface Treatment	Bracket Type	Accessory	Number of Extrusion Connection Holes
MYR 32.85	1 Piece(s)	Available	6 Day(s) or more	80	Precision Cleaning	Anodizing	Thin BracketsChangeable Hole Position Type	SST (Stainless steel bolt / nut set)	4
MYR 39.01	1 Piece(s)	Available	6 Day(s) or more	80	Precision Cleaning	Anodizing	Thin BracketsChangeable Hole Position Type	SSU (Stainless steel bolt / pre-assembly insertion spring nut set)	4
MYR 40.33	1 Piece(s)	Available	6 Day(s) or more	80	Precision Cleaning	Anodizing	Thin Brackets	SSP (Stainless steel bolt / post-assembly insertion spring nut set)	4
MYR 25.80	1 Piece(s)	Available	6 Day(s) or more	40	Precision Cleaning	Anodizing	Thin Brackets	SST (Stainless steel bolt / nut set)	2
MYR 28.85	1 Piece(s)	Available	6 Day(s) or more	40	Precision Cleaning	Anodizing	Thin Brackets	SSU (Stainless steel bolt / pre-assembly insertion spring nut set)	2
MYR 24.06	1 Piece(s)	Available	6 Day(s) or more	40	Precision Cleaning	Black anodizing	Thin Brackets	N/A	2

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

[Clean & Pack]Thin Brackets For 8 Series (Slot Width 10 mm) (SH-HBLSS8-SSP)

(i)Caution

Specification Table

Alterations

Alteration Details

Customers' Voices

Technical Information

Part Number

Specifications / Overview

Product Features

App. Example

Basic Information

Configure

Specification/Dimensions

type

Compatible Extrusion Width(mm)

Cleaning Method

Surface Treatment

Bracket Type

Accessory

Number of Extrusion Connection Holes

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm