(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
[Clean & Pack]8 Series (Slot Width 10 mm) - For 2 Slots, Extruded Ultra Thick Brackets (SH-HBLUD8-C-SSU)
![[Clean & Pack]8 Series (Slot Width 10 mm) - For 2 Slots, Extruded Ultra Thick Brackets SH-HBLUD8-C-SSU](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110310997919_001.jpg?$product_main$)
- Volume Discount
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
| · Degreasing (Anti-rust single packing) | : Part Number SL-□□ |
| · Precision cleaning (Degassing double packing) | : Part Number SH-□□ |
| · Electrolytic polishing + precision cleaning (Degassing double packing) | : Part Number SHD-□□ |
| Product Part Number | Cleaning Method | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Process |
| SL-□□ | Degreasing | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| SH-□□ | Precision cleaning | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| SHD-□□ | Electrolytic polishing + precision cleaning | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Brackets to connect extrusions with 2 slots using one bracket.
(i)Caution
- Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Part Number
Configured Part Number is shown.
SH-HBLUD8-C-SSU
| Part Number | [ M ] Material | [ S ] Surface treatment | Cleaning Method | |||
| Cleaning Method | Cleaning Environment | Packaging Type | Packing Environment | |||
| SL-HBLUD8 | A6N01SS−T5 | Anodize | Degreasing | General environment | Anti-rust packing | General environment |
| SH-HBLUD8 | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | ||
[!] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the
specification table.Specification Table
| Part Number |
| SL-HBLUD8 |
| Part Number | Mass | Applicable Screw, T Nut | Allowable Load | |||
| (g) | Bolt | Quantity | T Nut | Quantity | (N) | |
| SL-HBLUD8 | 380 | SCB8-25 | 4 | HNTTSN8-8 | 4 | 3920 |
| SH-HBLUD8 | ||||||
Alterations
| Part Number | — | (C·SST·SSU·SSP) |
| SL-HBLUD8 | — | SST |
| SL-HBLUD8 | — | C-SST |
[ ! ] The part numbers are those of the products before cleaning.
Alteration Details
■Mounting Hole Alteration for Cover (-C)
M5 tapped holes can be added on both sides.
Alteration Part Number Example: HBLUD8-C
■Set of applicable Screws and Nuts Details
| Alteration part number | Bolt | Nut | ||||
|---|---|---|---|---|---|---|
| Part Number | Material | Type | Part Number | Material | Stopper | |
| SST | SCB8-25 | Stainless Steel | Pre-Assembly | HNTTSN8-8 | Stainless Steel | None |
| SSU | SCB8-25 | Stainless Steel | Pre-Assembly | SHNTU8-8 | Stainless Steel | Provided |
| SSP | SCB8-25 | Stainless Steel | Post-Assembly | SHNTP8-8 | Stainless Steel | Provided |
* Screws and nuts for the number of mounting holes are included respectively.
Product Features
Brackets to connect extrusions with 2 slots using one bracket.
Extrusions can be connected more securely with the ultra thick extruded bracket.
| Applicable Extrusion |
|---|
| 8 Series 80 Square |
■Difference between Extruded Brackets and Tabbed Brackets
| [This Product]Extruded Brackets
| ·The extruded brackets are made of A6N01SS-T5, manufactured by aluminum extrusion. Surfaces are anodized. ·Suitable when appearance well balanced with the extrusions is desired. Designed to prevent dust from building up. ·Suitable for the areas where the strength is required because it is stronger than the tabbed brackets. |
| Tabbed Brackets
| ·The tabbed brackets are molded brackets made of material ADC12. Since it is not basically anodized, it is less expensive than extruded brackets of the same size. ·Since the tabs stop rotating the brackets when tightening, work efficiency is improved. ·Various types of brackets with additional functions are available. |
Technical Information
■ Perpendicularity
Perpendicularity of Extruded Brackets is manufactured within ±1° tolerance based on JIS Standard H4100 Special Grade.
For applications where perpendicularly is important, use Perpendicularly Machined Type.
(For 8 Series: Perpendicularity 0.03 and 0.06 are available.)
■How to Specify Allowable Load of Bracket
Allowable Load here means the load under which the bracket can stays at its position (without fracturing or sliding), after all of its mounting holes are fixed with screws.
Cleaning Process
* Stainless steel products may be used with alkaline hot pure water. There is no change in cleanliness.
* If the surface treatment is low-temperature black chrome plating, IPA cleaning will be applied.
Working Environment: General environment | ||||||
|---|---|---|---|---|---|---|
 Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning |  |  High-pressure jet washing (Ro water) followed by pure water cleaning | |  Oil-free Compressor Used | |  Anti-rust single packing |
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||
|---|---|---|---|---|---|---|---|---|
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning | | High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning | |  Use pure water (13 MΩ·cm) | | Use nitrogen blow | |  Conducted on a clean bench in a Class 10 clean environment |
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning | |  Electrolytic polishing with an electrolytic polishing layer according to the material | | High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning | | Use warm pure water (13 MΩ·cm) | | Use nitrogen blow | | Conducted on a clean bench in a Class 10 clean environment |
Packaging Example| For degreasing: (Part Number: SL-□□)  Depending on some products and dimensions, packaging type may vary. | For precision cleaning or electrolytic polishing + precision cleaning: (Part Number: SH-□□/SHD-□□)  [ ! ] Both the first and second layer packaging are degassed. |
Cleaning Effectiveness / Recommended Environment for UseCleaning Method | Product Part Number | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Use Case and Process |
|---|---|---|---|---|---|
| Degreasing | SL-□□ | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| Precision cleaning | SH-□□ | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| Electrolytic polishing + precision cleaning | SHD-□□ | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| SH-HBLUD8-C-SSU |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cleaning Method | Mounting Hole Alteration for Covers | Accessory |
|---|---|---|---|---|---|---|---|
MYR 68.19 | 1 Piece(s) | Available | 6 Day(s) or more | Precision Cleaning | C (Cover mounting tapping) | SSU (Stainless steel bolt / pre-assembly insertion spring nut set) |
Loading...
Basic Information
| Bracket Type | Extruded Brackets | Environmentally Friendly | RoHS compliant (10 substances) | Properties / applications | Clean washing |
|---|---|---|---|---|---|
| Tab Position | Not Tabbed | Compatible Extrusion Width(mm) | 80 | Compatible No. of Slots | 2 Slots |
| Perpendicularity | With standard | Series | MISUMI Brackets for 8 Series (Extrusion Slot Width 10mm) | Additional Functions (Extruded Bracket) | Standard |
| Material | A6N01SS-T5 | Surface Treatment | Anodizing | Extrusion No. | 8 |
| Extrusion Size | For 80 | Bracket Type | Ultra Thick Brackets | Applicable Screws | M8 bolt |
| Number of Extrusion Connection Holes | 4 |
Please check the type/dimensions/specifications of the part SH-HBLUD8-C-SSU in the [Clean & Pack]8 Series (Slot Width 10 mm) - For 2 Slots, Extruded Ultra Thick Brackets series.
Specification/Dimensions
-
type
- SH-HBLUD8
- SL-HBLUD8
-
Cleaning Method
- Degreasing
- Precision Cleaning
-
Mounting Hole Alteration for Covers
- C (Cover mounting tapping)
- N/A
-
Accessory
- N/A
- SSP (Stainless steel bolt / post-assembly insertion spring nut set)
- SST (Stainless steel bolt / nut set)
- SSU (Stainless steel bolt / pre-assembly insertion spring nut set)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| SH-HBLUD8-C |
| SH-HBLUD8-C-SSP |
| SH-HBLUD8-C-SST |
| SH-HBLUD8-SSP |
| SH-HBLUD8-SST |
| SH-HBLUD8-SSU |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cleaning Method | Mounting Hole Alteration for Covers | Accessory |
|---|---|---|---|---|---|---|---|
MYR 53.81 | 1 Piece(s) | Available | 6 Day(s) or more | Precision Cleaning | C (Cover mounting tapping) | N/A | |
MYR 65.95 | 1 Piece(s) | Available | 6 Day(s) or more | Precision Cleaning | C (Cover mounting tapping) | SSP (Stainless steel bolt / post-assembly insertion spring nut set) | |
MYR 64.59 | 1 Piece(s) | Available | 6 Day(s) or more | Precision Cleaning | C (Cover mounting tapping) | SST (Stainless steel bolt / nut set) | |
MYR 67.10 | 1 Piece(s) | Available | 6 Day(s) or more | Precision Cleaning | N/A | SSP (Stainless steel bolt / post-assembly insertion spring nut set) | |
MYR 63.23 | 1 Piece(s) | Available | 6 Day(s) or more | Precision Cleaning | N/A | SST (Stainless steel bolt / nut set) | |
MYR 69.33 | 1 Piece(s) | Available | 6 Day(s) or more | Precision Cleaning | N/A | SSU (Stainless steel bolt / pre-assembly insertion spring nut set) |
Additional Products in this Category
- Low Profile Bracket - 5 Series, 6mm Groove
- Ultra Thick Bracket - 8 Series, 10mm Slot, 3 or More Slots
- [Clean & Pack]6 Series (Slot Width 8 mm) - For 2 Slots, Extruded Thick Brackets
- [Clean & Pack]5 Series (Slot Width 6 mm) - For 1 Slot, Nut Mounting Brackets
- [Clean & Pack]8-45 Series (Slot Width 10 mm) - For 2 Slots, Extruded Thick Brackets for 100 Square
- M6 Series Delta Bracket ABLD-30-6
- M8 Series Standard Bracket (□45 Frame Dedicated Bracket) ABL
- M8 Series Standard Bracket (Steel) BLCM
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy