(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
[Clean & Pack]6 Series (Slot Width 8 mm) - For 1 Slot, Tabbed Brackets (SH-HBLFS6-C-SSP)
![[Clean & Pack]6 Series (Slot Width 8 mm) - For 1 Slot, Tabbed Brackets SH-HBLFS6-C-SSP](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110310995849_001.jpg?$product_main$)
- Volume Discount
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■ Part Number for Clean & Pack Products
| · Degreasing (Anti-rust single packing) | : Part Number SL-□□ |
| · Precision cleaning (Degassing double packing) | : Part Number SH-□□ |
| · Electrolytic polishing + precision cleaning (Degassing double packing) | : Part Number SHD-□□ |
| Product Part Number | Cleaning Method | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Process |
| SL-□□ | Degreasing | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| SH-□□ | Precision cleaning | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| SHD-□□ | Electrolytic polishing + precision cleaning | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
■ Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Brackets with tab for rotation stopper. Since the tabs stop rotating the brackets when tightening, work efficiency is improved.
(i)Caution
- Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Part Number
Configured Part Number is shown.
SH-HBLFS6-C-SSP
[!] Screws and nuts can also be purchased as a set. See Alterations below.
| Part Number | [ M ] Material | Cleaning Method | |||
| Cleaning Method | Cleaning Environment | Packaging Type | Packing Environment | ||
| SL-HBLFS6 | ADC12 | Degreasing | General environment | Anti-rust packing | General environment |
| SH-HBLFS6 | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | |
| SHD-HBLFS6 | Electrolytic polishing + precision cleaning | ||||
[!] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the
specification table.Specification Table
| Part Number |
| SL-HBLFS6 |
| Part Number | Mass | Applicable Screw, T Nut | Allowable Load | |||
| (g) | Bolt | Quantity | T Nut | Quantity | (N) | |
| SL-HBLFS6 | 13 | SCB6-12 | 2 | HNTTSN6-6 | 2 | 1176 |
| SH-HBLFS6 | ||||||
| SHD-HBLFS6 | ||||||
Alterations
| Part Number | — | (C·SST·SSU·SSP) |
| SL-HBLFS6 | — | SST |
| SL-HBLFS6 | — | C-SST |
| Alterations | Code | Spec. | Applicable Bracket |
| Mounting Hole Alteration for Cover | C | Adds taps on a bracket for cover mounting. (M5 on Both Sides) (Mounting Screw HCBM)  | HBLFSN6 |
| HBLFSN6－5 | |||
| HBLFSNB6 | |||
| HBLFSNM6 | |||
| CHBLFSN6 | |||
| HBLFS6 | |||
| HBLFSB6 | |||
| HBLFSL6 | |||
| HBLFSR6 | |||
| HBLFSNK6 | |||
| HBLFSNE6 | |||
| HBLFSH6 |
■Example of Cover Mounting
● Specify alteration code C.
● Specify alteration code C.
| Alterations | Code | Spec. | Applicable Bracket | |||||||||||||||||||||
| Applicable Bolts and Nuts Set | SST (Stainless Steel) SSU (Pre-Assembly Insertion Spring Nut Stainless Steel) SSP (Post-Assembly Insertion Spring Nut Stainless Steel) | Applicable screws and nuts for fixing the brackets on extrusions come in a set. (Example) When HBLFS6 is specified
[ ! ] When specifying other than HBLFS6, check for the applicable bolts and nuts. | — | |||||||||||||||||||||
| HBLFSN6 | ||||||||||||||||||||||||
| HBLFSN6－5 | ||||||||||||||||||||||||
| HBLFSNB6 | ||||||||||||||||||||||||
| HBLFSNM6 | ||||||||||||||||||||||||
| CHBLFSN6 | ||||||||||||||||||||||||
| HBLFS6 | ||||||||||||||||||||||||
| HBLFSB6 | ||||||||||||||||||||||||
| HBLFSL6 | ||||||||||||||||||||||||
| HBLFSR6 | ||||||||||||||||||||||||
| HBLFSNK6 | ||||||||||||||||||||||||
| HBLFSNE6 | ||||||||||||||||||||||||
| HBLFSH6 | ||||||||||||||||||||||||
[ ! ] For set combinations, see "Set of applicable Screws and Nuts Details" below.
[ ! ] The part numbers are those of the products before cleaning.
■Mounting Hole Alteration for Cover (-C)
M5 tapped holes can be added on both sides.
Alteration Part Number Example: HBLFS6-C
■Set of applicable Screws and Nuts Details
| Alteration part number | Bolt | Nut | ||||
|---|---|---|---|---|---|---|
| Part Number | Material | Type | Part Number | Material | Stopper | |
| SST | SCB6-12 | Stainless Steel | Pre-Assembly | HNTTSN6-6 | Stainless Steel | None |
| SSU | SCB6-12 | Stainless Steel | Pre-Assembly | SHNTU6-6 | Stainless Steel | Provided |
| SSP | SCB6-12 | Stainless Steel | Post-Assembly | SHNTP6-6 | Stainless Steel | Provided |
App. Example
Features: This type has tabs to fit extrusions and stop when tightening.
Since the tabs stop rotating the brackets when tightening, work efficiency is improved.
Used for L-connections.
Technical Information
■How to Specify Allowable Load of Bracket
This represents the allowable load per bracket for the extrusion assembly structured by bridging a beam extrusion between two vertical extrusions and then, attaching a bracket just below the bottom face of each end of the beam extrusion.
Allowable Load here means the load under which the bracket can stays at its position (without fracturing or sliding), after all of its mounting holes are fixed with screws.
Allowable Load here means the load under which the bracket can stays at its position (without fracturing or sliding), after all of its mounting holes are fixed with screws.
Cleaning Process
* Stainless steel products may be used with alkaline hot pure water. There is no change in cleanliness.
* If the surface treatment is low-temperature black chrome plating, IPA cleaning will be applied.
Working Environment: General environment | ||||||
|---|---|---|---|---|---|---|
 Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning |  |  High-pressure jet washing (Ro water) followed by pure water cleaning | |  Oil-free Compressor Used | |  Anti-rust single packing |
· Precision cleaning (Part Number: SH-□□)
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||
|---|---|---|---|---|---|---|---|---|
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning | | High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning | |  Use pure water (13 MΩ·cm) | | Use nitrogen blow | |  Conducted on a clean bench in a Class 10 clean environment |
· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning | |  Electrolytic polishing with an electrolytic polishing layer according to the material | | High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning | | Use warm pure water (13 MΩ·cm) | | Use nitrogen blow | | Conducted on a clean bench in a Class 10 clean environment |
Packaging Example| For degreasing: (Part Number: SL-□□)  Depending on some products and dimensions, packaging type may vary. | For precision cleaning or electrolytic polishing + precision cleaning: (Part Number: SH-□□/SHD-□□)  [ ! ] Both the first and second layer packaging are degassed. |
Cleaning Effectiveness / Recommended Environment for UseCleaning Method | Product Part Number | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Use Case and Process |
|---|---|---|---|---|---|
| Degreasing | SL-□□ | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| Precision cleaning | SH-□□ | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| Electrolytic polishing + precision cleaning | SHD-□□ | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| SH-HBLFS6-C-SSP |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cleaning Method | Mounting Hole Alteration for Covers | Accessory |
|---|---|---|---|---|---|---|---|
MYR 25.20 | 1 Piece(s) | Available | 6 Day(s) or more | Precision Cleaning | C (Cover mounting tapping) | SSP (Stainless steel bolt / post-assembly insertion spring nut set) |
Loading...
App. Example
Used for L-connections.
Basic Information
| Bracket Type | Tabbed Brackets | Environmentally Friendly | RoHS compliant (10 substances) | Additional Functions (Tabbed Bracket) | Standard |
|---|---|---|---|---|---|
| Properties / applications | Clean washing | Tab Position | Tabbed at Both Sides | Compatible Extrusion Width(mm) | 30 |
| Compatible No. of Slots | 1 Slot | Perpendicularity | With standard | Series | MISUMI Brackets for 6 Series (Extrusion Slot Width 8mm) |
| Material | ADC12 | Surface Treatment | N/A | Extrusion No. | 6 |
| Extrusion Size | For 30/60 | Bracket Type | Tabbed Brackets | Applicable Screws | M6 bolt |
| Number of Extrusion Connection Holes | 2 |
Please check the type/dimensions/specifications of the part SH-HBLFS6-C-SSP in the [Clean & Pack]6 Series (Slot Width 8 mm) - For 1 Slot, Tabbed Brackets series.
Specification/Dimensions
-
type
- SH-HBLFS6
- SHD-HBLFS6
- SL-HBLFS6
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic polishing + precision cleaning
-
Mounting Hole Alteration for Covers
- C (Cover mounting tapping)
- N/A
-
Accessory
- N/A
- SSP (Stainless steel bolt / post-assembly insertion spring nut set)
- SST (Stainless steel bolt / nut set)
- SSU (Stainless steel bolt / pre-assembly insertion spring nut set)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| SH-HBLFS6 |
| SH-HBLFS6-C |
| SH-HBLFS6-C-SST |
| SH-HBLFS6-C-SSU |
| SH-HBLFS6-SSP |
| SH-HBLFS6-SST |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cleaning Method | Mounting Hole Alteration for Covers | Accessory |
|---|---|---|---|---|---|---|---|
MYR 18.14 | 1 Piece(s) | Available | 6 Day(s) or more | Precision Cleaning | N/A | N/A | |
MYR 18.82 | 1 Piece(s) | Available | 6 Day(s) or more | Precision Cleaning | C (Cover mounting tapping) | N/A | |
MYR 22.58 | 1 Piece(s) | Available | 6 Day(s) or more | Precision Cleaning | C (Cover mounting tapping) | SST (Stainless steel bolt / nut set) | |
MYR 26.28 | 1 Piece(s) | Available | 6 Day(s) or more | Precision Cleaning | C (Cover mounting tapping) | SSU (Stainless steel bolt / pre-assembly insertion spring nut set) | |
MYR 23.27 | 1 Piece(s) | Available | 6 Day(s) or more | Precision Cleaning | N/A | SSP (Stainless steel bolt / post-assembly insertion spring nut set) | |
MYR 21.90 | 1 Piece(s) | Available | 6 Day(s) or more | Precision Cleaning | N/A | SST (Stainless steel bolt / nut set) |
Additional Products in this Category
- Reversing Bracket with Protrusion - 5 Series, 6mm Groove, 2-Row, 8 Holes (90 Degree)
- [Clean & Pack]6 Series (Slot Width 8 mm) - For 2 Slots, Thick Tabbed Brackets
- [Clean & Pack]6 Series (Slot Width 8 mm) - For 2 Slots, Reversal Tabbed Brackets, 8-Mounting Hole Type
- [Clean & Pack]8 Series (Slot Width 10 mm) - For 1 Slot, One-Side Rib Bracket
- M4 Series Ground Bracket ABLE-40-4
- M6 Series Ground Bracket ABLE-30-6
- M6 Series Earth Bracket ABLE-60-6
- M6 Series Heavy Bracket ABLR
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy