[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

[Clean & Pack]6 Series (Slot Width 8 mm) - For 1 Slot, Brackets With Single Side Tab (SH-HBLFSNE6-C-SSU)

Volume Discount

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■ Part Number for Clean & Pack Products

· Degreasing (Anti-rust single packing)	: Part Number SL-□□
· Precision cleaning (Degassing double packing)	: Part Number SH-□□
· Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■ Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Only one side has a tab, allowing panels to be attached to the surface with no tab.

(i)Caution

Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Part Number

Configured Part Number is shown.

SH-HBLFSNE6-C-SSU

Drawing/Specifications
3D Preview
Part Numbers
More Information

(Vertical Mounting)

(Vertical / Horizontal Mounting)

6 Series (Slot Width 8 mm) - For 1 Slot, Bracket with Single Side Tab: Related Image

[!] Screws and nuts can also be purchased as a set. See Alterations below.
[ ! ] For the mounting direction, see the "Application Example" below.

Type		[ M ] Material	Cleaning Method
Vertical Mounting	Vertical / Horizontal Mounting	[ M ] Material	Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-HBLFSNK6	SL-HBLFSNE6	ADC12	Degreasing	General environment	Anti-rust packing	General environment
SH-HBLFSNK6	SH-HBLFSNE6		Precision cleaning	Class 1,000	Degassing double packing	Class 10
SHD-HBLFSNK6	SHD-HBLFSNE6		Electrolytic polishing + precision cleaning	Class 1,000	Degassing double packing	Class 10

[!] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[!] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the

specification table.

Specification Table

Part Number

SL-HBLFSNK6

Part Number	Mass	Applicable Screw, T Nut				Allowable Load
	(g)	Bolt	Quantity	T Nut	Quantity	(N)
SL-HBLFSNK6	15	SCB6-12	2	HNTTSN6-6	2	1176
SH-HBLFSNK6
SHD-HBLFSNK6
SL-HBLFSNE6
SH-HBLFSNE6
SHD-HBLFSNE6

Alterations

Part Number	—	(C·SST·SSU·SSP)
SL-HBLFSNK6	—	SST
SL-HBLFSNK6	—	C-SST

Alterations	Code	Spec.	Applicable Bracket
Mounting Hole Alteration for Cover	C	Adds taps on a bracket for cover mounting. (M5 on Both Sides) (Mounting Screw HCBM)	HBLFSN6
			HBLFSN6－5
			HBLFSNB6
			HBLFSNM6
			CHBLFSN6
			HBLFS6
			HBLFSB6
			HBLFSL6
			HBLFSR6
			HBLFSNK6
			HBLFSNE6
			HBLFSH6

■Example of Cover Mounting
　● Specify alteration code C.

6 Series (Slot Width 8 mm) - For 1 Slot, Bracket with Single Side Tab: Related Image

Alterations

Code

Spec.

Applicable Bracket

Applicable Bolts
and Nuts Set

SST
(Stainless Steel)
SSU
(Pre-Assembly Insertion
Spring Nut
Stainless Steel)
SSP
(Post-Assembly Insertion
Spring Nut
Stainless Steel)

Applicable screws and nuts for fixing
the brackets on extrusions come in a set.

(Example) When HBLFS6 is specified

	Bolt		Nut
Code	Part Number	Quantity	Part Number	Quantity
SST	SCB6－12	2	HNTTSN6－6	2
SSU	SCB6－12		SHNTU6－6
SSP	SCB6－12		SHNTP6－6

[ ! ] When specifying other than HBLFS6, check for the applicable bolts and nuts.
　

—

HBLFSN6

HBLFSN6－5

HBLFSNB6

HBLFSNM6

CHBLFSN6

HBLFS6

HBLFSB6

HBLFSL6

HBLFSR6

HBLFSNK6

HBLFSNE6

HBLFSH6

[ ! ] Screws for Black Anodized Brackets and Cathodic Electrodeposition Painted (black) Brackets are made of HCBMTB (Trivalent Chromate Black).
[ ! ] For set combinations, see "Set of applicable Screws and Nuts Details" below.
[ ! ] The part numbers are those of the products before cleaning.

■Mounting Hole Alteration for Cover (-C)

M5 tapped holes can be added on both sides.
Alteration Part Number Example: HBLFSNK6-C

■Set of applicable Screws and Nuts Details

Alteration part number	Bolt		Nut
Alteration part number	Part Number	Material	Type	Part Number	Material	Stopper
SST	SCB6-12	Stainless Steel	Pre-Assembly	HNTTSN6-6	Stainless Steel	None
SSU	SCB6-12	Stainless Steel	Pre-Assembly	SHNTU6-6	Stainless Steel	Provided
SSP	SCB6-12	Stainless Steel	Post-Assembly	SHNTP6-6	Stainless Steel	Provided

App. Example

Features: Only one side has a tab, allowing panels to be attached to the surface with no tab.
HBLFSNK6 and HBLFSNE6 differ in the position of the tabs.
For HBLFSNE6, the tab fits into the extrusion slot even if the extrusion is placed horizontally.

HBLFSNK6
Example of HBLFSNE6

Example of HBLFSNE6

■ Can be mounted on a plate directly.

Technical Information

■How to Specify Allowable Load of Bracket

This represents the allowable load per bracket for the extrusion assembly structured by bridging a beam extrusion between two vertical extrusions and then, attaching a bracket just below the bottom face of each end of the beam extrusion.
Allowable Load here means the load under which the bracket can stays at its position (without fracturing or sliding), after all of its mounting holes are fixed with screws.

Cleaning Process

· Degreasing (Part Number: SL-□□)

* Stainless steel products may be used with alkaline hot pure water. There is no change in cleanliness.
* If the surface treatment is low-temperature black chrome plating, IPA cleaning will be applied.

Working Environment: General environment
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water cleaning		Oil-free Compressor Used		Anti-rust single packing

· Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		Electrolytic polishing with an electrolytic polishing layer according to the material		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

Depending on some products and dimensions,
packaging type may vary.

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
SH-HBLFSNE6-C-SSU

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Cleaning Method	Mounting Hole Alteration for Covers	Accessory
	MYR 27.72	1 Piece(s)	Available	6 Day(s) or more	Precision Cleaning	C (Cover mounting tapping)	SSU (Stainless steel bolt / pre-assembly insertion spring nut set)

App. Example

■ Can be mounted on a plate directly.

HBLFSNK6
Example of HBLFSNE6

Example of HBLFSNE6

Basic Information

Bracket Type	Tabbed Brackets	Environmentally Friendly	RoHS compliant (10 substances)	Additional Functions (Tabbed Bracket)	Standard
Properties / applications	Clean washing	Tab Position	One Side Tabbed	Compatible Extrusion Width(mm)	30
Compatible No. of Slots	1 Slot	Perpendicularity	With standard	Series	MISUMI Brackets for 6 Series (Extrusion Slot Width 8mm)
Material	ADC12	Extrusion No.	6	Extrusion Size	For 30/60
Bracket Type	Brackets with Single Side Tab	Applicable Screws	M6 bolt	Number of Extrusion Connection Holes	2

Please check the type/dimensions/specifications of the part SH-HBLFSNE6-C-SSU in the [Clean & Pack]6 Series (Slot Width 8 mm) - For 1 Slot, Brackets With Single Side Tab series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

type
- SH-HBLFSNE6
- SH-HBLFSNK6
- SHD-HBLFSNE6
- SHD-HBLFSNK6
- SL-HBLFSNE6
- SL-HBLFSNK6
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic polishing + precision cleaning
Clear
Mounting Hole Alteration for Covers
- C (Cover mounting tapping)
- N/A
Clear
Accessory
- N/A
- SSP (Stainless steel bolt / post-assembly insertion spring nut set)
- SST (Stainless steel bolt / nut set)
- SSU (Stainless steel bolt / pre-assembly insertion spring nut set)
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
SH-HBLFSNE6-C
SH-HBLFSNE6-C-SSP
SH-HBLFSNE6-C-SST
SH-HBLFSNE6-SSP
SH-HBLFSNE6-SST
SH-HBLFSNE6-SSU

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Cleaning Method	Mounting Hole Alteration for Covers	Accessory
MYR 20.87	1 Piece(s)	Available	6 Day(s) or more	Precision Cleaning	C (Cover mounting tapping)	N/A
MYR 26.01	1 Piece(s)	Available	6 Day(s) or more	Precision Cleaning	C (Cover mounting tapping)	SSP (Stainless steel bolt / post-assembly insertion spring nut set)
MYR 24.29	1 Piece(s)	Available	6 Day(s) or more	Precision Cleaning	C (Cover mounting tapping)	SST (Stainless steel bolt / nut set)
MYR 25.32	1 Piece(s)	Available	6 Day(s) or more	Precision Cleaning	N/A	SSP (Stainless steel bolt / post-assembly insertion spring nut set)
MYR 23.61	1 Piece(s)	Available	6 Day(s) or more	Precision Cleaning	N/A	SST (Stainless steel bolt / nut set)
MYR 27.03	1 Piece(s)	Available	6 Day(s) or more	Precision Cleaning	N/A	SSU (Stainless steel bolt / pre-assembly insertion spring nut set)

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

[Clean & Pack]6 Series (Slot Width 8 mm) - For 1 Slot, Brackets With Single Side Tab (SH-HBLFSNE6-C-SSU)

(i)Caution

Specification Table

Alterations

App. Example

Technical Information

Part Number

App. Example

Basic Information

Configure

Specification/Dimensions

type

Cleaning Method

Mounting Hole Alteration for Covers

Accessory

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm