(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
[Clean & Pack]5 Series (Slot Width 6 mm) - For 2 Slots, Extruded Thick Brackets (SL-HBLTDW5-C-SSP)
![[Clean & Pack]5 Series (Slot Width 6 mm) - For 2 Slots, Extruded Thick Brackets SL-HBLTDW5-C-SSP](http://my.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110310994499_001.jpg?$product_main$)
- Volume Discount
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■ Part Number for Clean & Pack Products
| · Degreasing (Anti-rust single packing) | : Part Number SL-□□ |
| · Precision cleaning (Degassing double packing) | : Part Number SH-□□ |
| · Electrolytic polishing + precision cleaning (Degassing double packing) | : Part Number SHD-□□ |
| Product Part Number | Cleaning Method | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Process |
| SL-□□ | Degreasing | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| SH-□□ | Precision cleaning | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| SHD-□□ | Electrolytic polishing + precision cleaning | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
■ Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
It has four mounting holes on one side, allowing more secure connection. Extrusions with 2 slots can be connected with one bracket.
(i)Caution
- Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Part Number
Configured Part Number is shown.
SL-HBLTDW5-C-SSP
| Part Number | [ M ] Material | [ S ] Surface treatment | Cleaning Method | |||
| Cleaning Method | Cleaning Environment | Packaging Type | Packing Environment | |||
| SL-HBLTDW5 | A6N01SS−T5 | Clear Anodize | Degreasing | General environment | Anti-rust packing | General environment |
| SH-HBLTDW5 | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | ||
[!] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the
specification table.Specification Table
[ ! ] If you would like to order screws and nuts as a set, please check the alteration "Applicable Screw, Nut Set."
| Part Number |
| SL-HBLTDW5 |
| Part Number | Mass | Applicable Screw, T Nut | Allowable Load | |||
| (g) | Bolt | Quantity | T Nut | Quantity | (N) | |
| SL-HBLTDW5 | 59 | SCB5-10 | 8 | HNTTBS5-5 | 8 | 2156 |
| SH-HBLTDW5 | ||||||
Alterations
| Part Number | — | (C·SST·SSU·SSP) |
| SL-HBLTDW5 | — | SST |
| SL-HBLTDW5 | — | C-SST |
| Alterations | Code | Spec. | Applicable Bracket |
| Mounting Hole Alteration for Cover | C | Adds taps on a bracket for cover mounting. (M5 on Both Sides, Depth 15 mm) (Mounting screw HCBM) | NBLTD5 |
| HBLTD5 | |||
| CHBLTD5 | |||
| NBLUD5 | |||
| HBLUD5 | |||
| HBLTDW5 |
| Alterations | Code | Spec. | Applicable Bracket | |||||||||||||||||||||||||||||||
| Applicable Bolts and Nuts Set | SST (Stainless Steel) SSU (Pre-Assembly Insertion Spring Nut Stainless Steel) SSP (Post-Assembly Insertion Spring Nut Stainless Steel) | Applicable bolts and nuts for fixing the brackets on extrusions come in a set. (Example) When HBLTD5 is specified
[ ! ] When specifying other than HBLTD5, | — | |||||||||||||||||||||||||||||||
| NBLTD5 | ||||||||||||||||||||||||||||||||||
| HBLTD5 | ||||||||||||||||||||||||||||||||||
| HBLTDB5 | ||||||||||||||||||||||||||||||||||
| CHBLTD5 | ||||||||||||||||||||||||||||||||||
| NBLUD5 | ||||||||||||||||||||||||||||||||||
| HBLUD5 | ||||||||||||||||||||||||||||||||||
| HBLUDB5 | ||||||||||||||||||||||||||||||||||
| HBLTDW5 | ||||||||||||||||||||||||||||||||||
Alteration Details
■Mounting Hole Alteration for Cover (-C)
M5 tapped holes can be added on both sides.
Alteration Part Number Example: HBLTDW5-C
■Set of applicable Screws and Nuts Details
| Alteration part number | Bolt | Nut | ||||
|---|---|---|---|---|---|---|
| Part Number | Material | Type | Part Number | Material | Stopper | |
| SST | SCB5-10 | Stainless Steel | Pre-Assembly | HNTTBS5-5 | Stainless Steel | None |
| SSU | SCB5-10 | Stainless Steel | Pre-Assembly | SHNTU5-5 | Stainless Steel | Provided |
| SSP | SCB5-10 | Stainless Steel | Post-Assembly | SHNTP5-5 | Stainless Steel | Provided |
* Screws and nuts for the number of mounting holes are included.
■Difference between Extruded Brackets and Tabbed Brackets
| [This Product]Extruded Brackets
| ·The extruded brackets are made of A6N01SS-T5, manufactured by aluminum extrusion. Surfaces are anodized. ·Suitable when appearance well balanced with the extrusions is desired. Designed to prevent dust from building up. ·Suitable for the areas where the strength is required because it is stronger than the tabbed brackets. |
| Tabbed Brackets
| ·The tabbed brackets are molded brackets made of material ADC12. Since it is not basically anodized, it is less expensive than extruded brackets of the same size. ·Since the tabs stop rotating the brackets when tightening, work efficiency is improved. ·Various types of brackets with additional functions are available. |
Technical Information
■ Perpendicularity
Perpendicularity of Extruded Brackets is manufactured within ±1° tolerance based on JIS Standard H4100 Special Grade.
For applications where perpendicularly is important, use Perpendicularly Machined Type.
(For 5 Series: Perpendicularity 0.03 type and 0.06 type are available.)
■How to Specify Allowable Load of Bracket
This represents the allowable load per bracket for the extrusion assembly structured by bridging a beam extrusion between two vertical extrusions and then, attaching a bracket just below the bottom face of each end of the beam extrusion.
Allowable Load here means the load under which the bracket can stays at its position (without fracturing or sliding), after all of its mounting holes are fixed with screws.
Allowable Load here means the load under which the bracket can stays at its position (without fracturing or sliding), after all of its mounting holes are fixed with screws.
Cleaning Process
* Stainless steel products may be used with alkaline hot pure water. There is no change in cleanliness.
* If the surface treatment is low-temperature black chrome plating, IPA cleaning will be applied.
Working Environment: General environment | ||||||
|---|---|---|---|---|---|---|
 Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning |  |  High-pressure jet washing (Ro water) followed by pure water cleaning | |  Oil-free Compressor Used | |  Anti-rust single packing |
· Precision cleaning (Part Number: SH-□□)
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||
|---|---|---|---|---|---|---|---|---|
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning | | High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning | |  Use pure water (13 MΩ·cm) | | Use nitrogen blow | |  Conducted on a clean bench in a Class 10 clean environment |
· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning | |  Electrolytic polishing with an electrolytic polishing layer according to the material | | High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning | | Use warm pure water (13 MΩ·cm) | | Use nitrogen blow | | Conducted on a clean bench in a Class 10 clean environment |
Packaging Example| For degreasing: (Part Number: SL-□□)  Depending on some products and dimensions, packaging type may vary. | For precision cleaning or electrolytic polishing + precision cleaning: (Part Number: SH-□□/SHD-□□)  [ ! ] Both the first and second layer packaging are degassed. |
Cleaning Effectiveness / Recommended Environment for UseCleaning Method | Product Part Number | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Use Case and Process |
|---|---|---|---|---|---|
| Degreasing | SL-□□ | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| Precision cleaning | SH-□□ | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| Electrolytic polishing + precision cleaning | SHD-□□ | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| SL-HBLTDW5-C-SSP |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cleaning Method | Mounting Hole Alteration for Covers | Accessory |
|---|---|---|---|---|---|---|---|
MYR 50.45 | 1 Piece(s) | Available | 6 Day(s) or more | Degreasing | C (Cover mounting tapping) | SSP (Stainless steel bolt / post-assembly insertion spring nut set) |
Loading...
Basic Information
| Bracket Type | Extruded Brackets | Environmentally Friendly | RoHS compliant (10 substances) | Properties / applications | Clean washing |
|---|---|---|---|---|---|
| Tab Position | Not Tabbed | Compatible Extrusion Width(mm) | 40 | Compatible No. of Slots | 2 Slots |
| Perpendicularity | With standard | Series | MISUMI Brackets for 5 Series (Extrusion Slot Width 6mm) | Additional Functions (Extruded Bracket) | Standard |
| Material | A6N01SS-T5 | Surface Treatment | Clear anodizing | Extrusion No. | 5 |
| Extrusion Size | For 40 | Bracket Type | Thick Brackets | Applicable Screws | M5 bolt |
| Number of Extrusion Connection Holes | 8 |
Please check the type/dimensions/specifications of the part SL-HBLTDW5-C-SSP in the [Clean & Pack]5 Series (Slot Width 6 mm) - For 2 Slots, Extruded Thick Brackets series.
Specification/Dimensions
-
type
- SH-HBLTDW5
- SL-HBLTDW5
-
Cleaning Method
- Degreasing
- Precision Cleaning
-
Mounting Hole Alteration for Covers
- C (Cover mounting tapping)
- N/A
-
Accessory
- N/A
- SSP (Stainless steel bolt / post-assembly insertion spring nut set)
- SST (Stainless steel bolt / nut set)
- SSU (Stainless steel bolt / pre-assembly insertion spring nut set)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| SH-HBLTDW5-C-SST |
| SH-HBLTDW5-C-SSU |
| SH-HBLTDW5-SSP |
| SL-HBLTDW5-C-SST |
| SL-HBLTDW5-C-SSU |
| SL-HBLTDW5-SSP |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cleaning Method | Mounting Hole Alteration for Covers | Accessory |
|---|---|---|---|---|---|---|---|
MYR 36.40 | 1 Piece(s) | Available | 6 Day(s) or more | Precision Cleaning | C (Cover mounting tapping) | SST (Stainless steel bolt / nut set) | |
MYR 53.93 | 1 Piece(s) | Available | 6 Day(s) or more | Precision Cleaning | C (Cover mounting tapping) | SSU (Stainless steel bolt / pre-assembly insertion spring nut set) | |
MYR 49.74 | 1 Piece(s) | Available | 6 Day(s) or more | Precision Cleaning | N/A | SSP (Stainless steel bolt / post-assembly insertion spring nut set) | |
MYR 35.70 | 1 Piece(s) | Available | 6 Day(s) or more | Degreasing | C (Cover mounting tapping) | SST (Stainless steel bolt / nut set) | |
MYR 53.22 | 1 Piece(s) | Available | 6 Day(s) or more | Degreasing | C (Cover mounting tapping) | SSU (Stainless steel bolt / pre-assembly insertion spring nut set) | |
MYR 49.03 | 1 Piece(s) | Available | 6 Day(s) or more | Degreasing | N/A | SSP (Stainless steel bolt / post-assembly insertion spring nut set) |
Additional Products in this Category
- 5 Series Aluminum Frame Thin Stainless Steel Tabbed Bracket - 6mm Slot
- Thick/Triangle Bracket - 6 Series, 8mm Slot, 2 Slots
- Reversing Bracket with Protrusion - 8 Series, 10mm Groove, 1-Row Groove, 4 Mounting Holes (90 Degree)
- 8 Series Aluminum Frame Extruded Ultra Thick Bracket (Perpendicular Machining) - 10mm Slot, 1 Slot
- [Clean & Pack]6 Series (Slot Width 8 mm) - For 1 Slot, Triangle Brackets
- [Clean & Pack]Thin Brackets For 8 Series (Slot Width 10 mm)
- [Clean & Pack]8 Series (Slot Width 10 mm) - For 1 Slot, Brackets With Slotted Hole on One Side
- M6 Series Ground Bracket ABLE-30-6
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy