[Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

[Clean & Pack]5 Series (Slot Width 6 mm) - For 1 Slot, Reversal Tabbed Brackets, 4-Mounting Hole Type (SHD-HBLFSSW5-SST)

Volume Discount

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■ Part Number for Clean & Pack Products

· Degreasing (Anti-rust single packing)	: Part Number SL-□□
· Precision cleaning (Degassing double packing)	: Part Number SH-□□
· Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■ Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Tabbed Reversal Brackets with two mounting holes on one side can connect extrusions more securely.

(i)Caution

Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Part Number

Configured Part Number is shown.

SHD-HBLFSSW5-SST

Drawing/Specifications
3D Preview
Part Numbers
More Information

Part Number	[ M ] Material	[ S ] Surface treatment	Cleaning Method
			Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-HBLFSSW5	ADC12	—	Degreasing	General environment	Anti-rust packing	General environment
SH-HBLFSSW5			Precision cleaning	Class 1,000	Degassing double packing	Class 10
SHD-HBLFSSW5			Electrolytic polishing + precision cleaning
SL-HBLFSSWB5		Black Anodize	Degreasing	General environment	Anti-rust packing	General environment
SH-HBLFSSWB5			Precision cleaning	Class 1,000	Degassing double packing	Class 10

[!] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[!] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the

specification table.

Specification Table

Part Number

SL-HBLFSSW5

SH-HBLFSSWB5

Part Number	Mass	Applicable Screw, T Nut				Allowable Load
	(g)	Bolt	Quantity	T Nut	Quantity	(N)
SL-HBLFSSW5	24	SCB5-10	4	HNTTBS5-5	4	1470
SH-HBLFSSW5
SHD-HBLFSSW5
SL-HBLFSSWB5^*
SH-HBLFSSWB5^*

Alterations

Part Number	—	(C·SST·SSU·SSP)
SL-HBLFSSW5	—	SST
SH-HBLFSSWB5	—	C-SST

Alterations	Code	Spec.	Applicable Bracket
Mounting Hole Alteration for Cover	C	Adds taps on a bracket for cover mounting. (M5 on Both Sides) (Mounting screw HCBM)	HBLFSNF5
			HBLFSN5
			HBLFSN5－4
			HBLFSNB5
			HBLFSNM5
			CHBLFSN5
			HBLFSL5
			HBLFSLB5
			HBLFSLM5
			HBLFSR5
			HBLFSNK5
			HBLFSNE5
			HBLFSNT5
			HBLFSSW5
			HBLFSSWB5

[Example of Cover Mounting]
Specify alteration code C.

[ ! ] The part numbers are those of the products before cleaning.

Alterations

Code

Spec.

Applicable Bracket

Applicable Screws and Nuts Set

SST
(Stainless Steel)
SSU
(Pre-Assembly Insertion
Spring Nut
Stainless Steel)
SSP
(Post-Assembly Insertion
Spring Nut
Stainless Steel)

Applicable bolts and nuts for fixing the brackets on extrusions come in a set.

Example: When HBLFSN5 is specified

	Bolt		Nut
Code	Part Number	Quantity	Part Number	Quantity
SST	SCB5－10	2	HNTTBS5－5	2
SSU	SCB5－10		SHNTU5－5
SSP	SCB5－10		SHNTP5－5

[ ! ] When specifying other than HBLFSN5,
check for the applicable bolts and nuts respectively.

—

HBLFSNF5

HBLFSN5

HBLFSN5－4

HBLFSNB5

HBLFSNM5

CHBLFSN5

HBLFSL5

HBLFSLB5

HBLFSLM5

HBLFSR5

HBLFSNK5

HBLFSNE5

HBLFSNT5

HBLFSSW5

HBLFSSWB5

[ ! ] Screws for black anodized brackets are made of HCBMTB (Trivalent Chromate Black).

Alteration Details

■Mounting Hole Alteration for Cover (-C)

M5 tapped holes can be added on both sides.
Alteration Part Number Example: HBLFSSW5-C

■Set of applicable Screws and Nuts Details

Alteration part number	Bolt		Nut
Alteration part number	Part Number	Material	Type	Part Number	Material	Stopper
SST	SCB5-10	Stainless Steel	Pre-Assembly	HNTTBS5-5	Stainless Steel	None
SSU	SCB5-10	Stainless Steel	Pre-Assembly	SHNTU5-5	Stainless Steel	Provided
SSP	SCB5-10	Stainless Steel	Post-Assembly	SHNTP5-5	Stainless Steel	Provided

App. Example

This type has tabs to fit extrusions and stop when tightening.
Since the tabs stop rotating the brackets when tightening, work efficiency is improved.
It is possible to connect by both L and Cross-Connections.

Can be connected in parallel and perpendicular directions to the extrusion slot.

Technical Information

■How to Specify Allowable Load of Bracket

This represents the allowable load per bracket for the extrusion assembly structured by bridging a beam extrusion between two vertical extrusions and then, attaching a bracket just below the bottom face of each end of the beam extrusion.
Allowable Load here means the load under which the bracket can stays at its position (without fracturing or sliding), after all of its mounting holes are fixed with screws.

Similar Products

■Tabbed Brackets: Mounting surfaces are tabbed to prevent rotations.

Product Name	Reversal Tabbed Brackets	One-Side Rib Brackets	Nut Mounting Brackets	Brackets with Single Side Tab	Brackets with Cover
Product Photo				One side has no tab and is connectable to plates.
Material	ADC12	ADC12	ADC12	ADC12	ADC12
Features	Tabs on mounting surfaces enable easy positioning. Most conventional type.	One-Sided Tabbed (Side Face), easy to manipulate with hex wrenches.	Nut position adjustment is not required since the long protrusion fixes nuts.	Only one side of bracket has tabs. Suitable when connecting extrusions and plates.	Brackets with dustproof cover. Superior in sanitation since dust does not intrude.
Representative models	HBLFSN5	HBLFSL5	HBLFSR5	HBLFSNK5	HBLFSNT5

Cleaning Process

· Degreasing (Part Number: SL-□□)

* Stainless steel products may be used with alkaline hot pure water. There is no change in cleanliness.
* If the surface treatment is low-temperature black chrome plating, IPA cleaning will be applied.

Working Environment: General environment
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water cleaning		Oil-free Compressor Used		Anti-rust single packing

· Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		Electrolytic polishing with an electrolytic polishing layer according to the material		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

Depending on some products and dimensions,
packaging type may vary.

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
SHD-HBLFSSW5-SST

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Cleaning Method	Surface Treatment	Mounting Hole Alteration for Covers	Accessory
	MYR 30.28	1 Piece(s)	Available	6 Day(s) or more	Electrolytic polishing + precision cleaning	N/A	N/A	SST (Stainless steel bolt / nut set)

App. Example

Can be connected in parallel and perpendicular directions to the extrusion slot.

Basic Information

Bracket Type	Tabbed Brackets	Environmentally Friendly	RoHS compliant (10 substances)	Additional Functions (Tabbed Bracket)	Standard
Properties / applications	Clean washing	Tab Position	Tabbed at Both Sides	Compatible Extrusion Width(mm)	20 / 40
Compatible No. of Slots	1 Slot	Perpendicularity	With standard	Series	MISUMI Brackets for 5 Series (Extrusion Slot Width 6mm)
Material	ADC12	Extrusion No.	5	Extrusion Size	For 20/25/40
Bracket Type	Tabbed Reversal Brackets	Applicable Screws	M5 bolt	Number of Extrusion Connection Holes	4

Please check the type/dimensions/specifications of the part SHD-HBLFSSW5-SST in the [Clean & Pack]5 Series (Slot Width 6 mm) - For 1 Slot, Reversal Tabbed Brackets, 4-Mounting Hole Type series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

type
- SH-HBLFSSW5
- SH-HBLFSSWB5
- SHD-HBLFSSW5
- SL-HBLFSSW5
- SL-HBLFSSWB5
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic polishing + precision cleaning
Clear
Surface Treatment
- Black anodizing
- N/A
Clear
Mounting Hole Alteration for Covers
- C (Cover mounting tapping)
- N/A
Clear
Accessory
- N/A
- SSP (Stainless steel bolt / post-assembly insertion spring nut set)
- SST (Stainless steel bolt / nut set)
- SSU (Stainless steel bolt / pre-assembly insertion spring nut set)
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
SH-HBLFSSW5-C-SST
SH-HBLFSSW5-C-SSU
SH-HBLFSSW5-SSP
SHD-HBLFSSW5-SSU
SL-HBLFSSW5
SL-HBLFSSW5-C

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Cleaning Method	Surface Treatment	Mounting Hole Alteration for Covers	Accessory
MYR 29.43	1 Piece(s)	Available	6 Day(s) or more	Precision Cleaning	N/A	C (Cover mounting tapping)	SST (Stainless steel bolt / nut set)
MYR 37.30	1 Piece(s)	Available	6 Day(s) or more	Precision Cleaning	N/A	C (Cover mounting tapping)	SSU (Stainless steel bolt / pre-assembly insertion spring nut set)
MYR 33.34	1 Piece(s)	Available	6 Day(s) or more	Precision Cleaning	N/A	N/A	SSP (Stainless steel bolt / post-assembly insertion spring nut set)
MYR 38.19	1 Piece(s)	Available	6 Day(s) or more	Electrolytic polishing + precision cleaning	N/A	N/A	SSU (Stainless steel bolt / pre-assembly insertion spring nut set)
MYR 18.64	1 Piece(s)	Available	6 Day(s) or more	Degreasing	N/A	N/A	N/A
MYR 20.28	1 Piece(s)	Available	6 Day(s) or more	Degreasing	N/A	C (Cover mounting tapping)	N/A

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

[Clean & Pack]5 Series (Slot Width 6 mm) - For 1 Slot, Reversal Tabbed Brackets, 4-Mounting Hole Type (SHD-HBLFSSW5-SST)

(i)Caution

Specification Table

Alterations

Alteration Details

App. Example

Technical Information

Similar Products

Part Number

App. Example

Basic Information

Configure

Specification/Dimensions

type

Cleaning Method

Surface Treatment

Mounting Hole Alteration for Covers

Accessory

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm