[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

[Clean & Pack]6 Series (Slot Width 8 mm) - Block Bracket for 30/60 Square Aluminum Extrusions (SH-HBLBL6-SSU)

Volume Discount

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■ Part Number for Clean & Pack Products

· Degreasing (Anti-rust single packing)	: Part Number SL-□□
· Precision cleaning (Degassing double packing)	: Part Number SH-□□
· Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■ Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

·It does not protrude from extrusions during cross-connection. [Material]A6063

(i)Caution

Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Part Number

Configured Part Number is shown.

SH-HBLBL6-SSU

Drawing/Specifications
3D Preview
Part Numbers
More Information

Part Number	[ M ] Material	[ M ] Material	Cleaning Method
			Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-HBLBL6	A6N01SS−T5	Anodize	Degreasing	General environment	Anti-rust packing	General environment
SH-HBLBL6			Precision cleaning	Class 1,000	Degassing double packing	Class 10

[!] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ]See the details of precision cleaning and electrolytic polishing shown at the bottom of the

specification table.

Specification Table

Part Number

SL-HBLBL6

Part Number	Mass	Applicable Screw		Allowable Load
	(g)	Screw	Quantity	(N)
SL-HBLBL6	31	CBM6−12	2	980
SH-HBLBL6

Alterations

Alterations	Code	Spec.					Applicable Bracket
Applicable Screws and Nuts Set	SST	Applicable screws and nuts for fixing the brackets on extrusions come in a set.
	(Stainless Steel)
	SSU
	(Pre-Assembly Insertion
	Spring Nuts		Screws		Nut
	Stainless steel)	Code	Part Number	Quantity	Part Number	Quantity
	SSP	SST	SCB6－12	2	HNTTSN6－6	2
	(Post-Assembly Insertion
	Spring Nuts	SSU	SCB6－12		SHNTU6－6
	Stainless steel)
		SSP	SCB6－12		SHNTP6－6		SL-HBLBL6·SH-HBLBL6

[ ! ] Screws for black anodized brackets are made of HCBMTB (Trivalent Chromate Black).

Alteration Details

■Set of applicable Screws and Nuts Details

Alteration part number	Screws		Nut
Alteration part number	Part Number	Material	Type	Part Number	Material	Stopper
SST	SCB6-12	Stainless Steel	Pre-Assembly	HNTTSN6-6	Stainless Steel	None
SSU	SCB6-12	Stainless Steel	Pre-Assembly	SHNTU6-6	Stainless Steel	Provided
SSP	SCB6-12	Stainless Steel	Post-Assembly	SHNTP6-6	Stainless Steel	Provided

Applicable Extrusion

· 6 Series Aluminum Extrusions

App. Example

·Does not protrude from extrusions during cross-connection

Cleaning Process

· Degreasing (Part Number: SL-□□)

* Stainless steel products may be used with alkaline hot pure water. There is no change in cleanliness.
* If the surface treatment is low-temperature black chrome plating, IPA cleaning will be applied.

Working Environment: General environment
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water cleaning		Oil-free Compressor Used		Anti-rust single packing

· Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		Electrolytic polishing in an electrolytic polishing tank according to the material		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

Depending on some products and dimensions,
packaging type may vary.

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
SH-HBLBL6-SSU

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Cleaning Method	Accessory
	MYR 38.05	1 Piece(s)	Available	6 Day(s) or more	Precision Cleaning	SSU (Stainless Steel Bolt and Pre-Assembly Insertion Spring Nut Set)

App. Example

Basic Information

Extrusion Series	MISUMI 6 Series (8 mm Groove Width)	Material	A6N01SS-T3	Surface Treatment	Anodize
Extrusion Series	HFS	Extrusion Size	For 30 and 60	Bracket Type	Block Brackets
Mounting Hole Alteration for Covers	None	Applicable Screws	M6 screw	Number of Extrusion Connection Holes	2

Please check the type/dimensions/specifications of the part SH-HBLBL6-SSU in the [Clean & Pack]6 Series (Slot Width 8 mm) - Block Bracket for 30/60 Square Aluminum Extrusions series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

type
- SH-HBLBL6
- SL-HBLBL6
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
Clear
Accessory
- None
- SSP (Stainless Steel Bolt and Post-Assembly Insertion Spring Nut Set)
- SST (Stainless Steel Bolt and Nut Set)
- SSU (Stainless Steel Bolt and Pre-Assembly Insertion Spring Nut Set)
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
SH-HBLBL6
SH-HBLBL6-SSP
SH-HBLBL6-SST
SL-HBLBL6
SL-HBLBL6-SSP
SL-HBLBL6-SST

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Cleaning Method	Accessory
MYR 32.51	1 Piece(s)	Available	6 Day(s) or more	Precision Cleaning	None
MYR 36.34	1 Piece(s)	Available	6 Day(s) or more	Precision Cleaning	SSP (Stainless Steel Bolt and Post-Assembly Insertion Spring Nut Set)
MYR 34.80	1 Piece(s)	Available	6 Day(s) or more	Precision Cleaning	SST (Stainless Steel Bolt and Nut Set)
MYR 28.49	1 Piece(s)	Available	6 Day(s) or more	Degreasing	None
MYR 32.86	1 Piece(s)	Available	6 Day(s) or more	Degreasing	SSP (Stainless Steel Bolt and Post-Assembly Insertion Spring Nut Set)
MYR 30.63	1 Piece(s)	Available	6 Day(s) or more	Degreasing	SST (Stainless Steel Bolt and Nut Set)

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

[Clean & Pack]6 Series (Slot Width 8 mm) - Block Bracket for 30/60 Square Aluminum Extrusions (SH-HBLBL6-SSU)

(i)Caution

Specification Table

Alterations

Alteration Details

Applicable Extrusion

App. Example

Part Number

App. Example

Basic Information

Configure

Specification/Dimensions

type

Cleaning Method

Accessory

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm