[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

[Clean & Pack] Angled Brackets for 8 Series (Slot Width 10 mm) (SL-HBL45TS8-C-SST)

Volume Discount

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■ Part Number for Clean & Pack Products

· Degreasing (Anti-rust single packing)	: Part Number SL-□□
· Precision cleaning (Degassing double packing)	: Part Number SH-□□
· Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■ Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Extruded Brackets to connect extrusions at angles. It can be fixed at 45 and 135 degrees.

(i)Caution

Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Part Number

Configured Part Number is shown.

SL-HBL45TS8-C-SST

Drawing/Specifications
3D Preview
Part Numbers
More Information

SL-HBL45TS8
SH-HBL45TS8

SL-HBL45TD8
SH-HBL45TD8

SL-HBL135TS8
SH-HBL135TS8

SL-HBL135TD8
SH-HBL135TD8

Part Number				[ M ] Material	[ S ] Surface treatment	Cleaning Method
45 Degree Single	45 Degree Double	135 Degree Single	135 Degree Double	[ M ] Material	[ S ] Surface treatment	Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-HBL45TS8	SL-HBL45TD8	SL-HBL135TS8	SL-HBL135TD8	A6N01SS−T5	Anodize	Degreasing	General environment	Anti-rust packing	General environment
SH-HBL45TS8	SH-HBL45TD8	SH-HBL135TS8	SH-HBL135TD8	A6N01SS−T5	Anodize	Precision cleaning	Class 1,000	Degassing double packing	Class 10

[!] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ]See the details of precision cleaning and electrolytic polishing shown at the bottom of the

specification table.

Specification Table

Part Number

SL-HBL45TS8

Part Number	Mass	Applicable Screw, T Nut				Allowable Load
	(g)					(N)
		Screws	Quantity	T Nut	Quantity
SL-HBL45TS8	88	SCB8-20	2	HNTTSN8-8	2	2058
SH-HBL45TS8
SL-HBL45TD8	204		4		4	2940
SH-HBL45TD8
SL-HBL135TS8	103		2		2	2058
SH-HBL135TS8
SL-HBL135TD8	240		4		4	2940
SH-HBL135TD8

Alterations

Alterations	Code	Spec.	Applicable Bracket
Mounting Hole Alteration for Cover	C	Adds taps on a bracket for cover mounting. (M5 on Both Sides, Depth 15 mm) (Mounting Screw HCBM)	HBL45TS8 HBL135TS8
135 Degree Bracket Counterboring	Z8	135 Degree Bracket Machine 2 counterbored holes on HBL135T□8. 　 (Applicable Screws: M8) [NG] Not available in combination with Applicable Screws and Nuts	HBL135TS8
135 Degree Bracket Counterboring	Z8		HBL135TD8

Alterations

Code

Spec.

Applicable Bracket

Applicable Screws and Nuts Set
Nuts Set

SST
(Stainless Steel)
SSU
Pre-Assembly Insertion
Spring Nuts
Stainless Steel
SSP
(Post-Assembly
Spring Nuts
Stainless steel)

Applicable screws and nuts for fixing
the brackets on extrusions come in a set.

Example: When HBL45TS8 is specified

	Screws		Nut
Code	Part Number	Quantity	Part Number	Quantity
SST	SCB8－20	2	HNTTSN8－8	2
SSU	SCB8－20		SHNTU8－8
SSP	SCB8－20		SHNTP8－8

[ ! ] When specifying other than HBL45TS8,
check for the applicable screws and nuts respectively.

HBL45TS8

HBL45TD8

HBL135TS8

HBL135TD8

[ ! ] The part numbers are those of the products before cleaning.

■Set of applicable Screws and Nuts Details

Alteration part number	Screws		Nut
Alteration part number	Part Number (Diameter only)	Material	Type	Part Number	Material	Stopper
SST	SCB8-20	Stainless Steel	Pre-Assembly	HNTTSN8-8	Stainless Steel	None
SSU	SCB8-20	Stainless Steel	Pre-Assembly	SHNTU8-8	Stainless Steel	Provided
SSP	SCB8-20	Stainless Steel	Post-Assembly	SHNTP8-8	Stainless Steel	Provided

For 40 Square and 45 Square extrusions (HBL45TS8, HBL135TS8), 2 screws and nuts.
For 80 Square Extrusion (HBL45TD8, HBL135TD8), 4 screws and nuts are included.

Main body only if no accessories are included. Please choose nuts and screws.

Applicable Extrusion

HBL45TS8, HBL135TS8: 8 Series 40 Square , 8-45 Series 1 Slot Extrusion
HBL45TD8, HBL135TD8: 8 Series 80 Square Extrusion

App. Example

·You can mount it neatly by making a 45 degree cut alteration on the aluminum extrusion.

Product Comparison Information

■8 Series Angled Brackets

Product Name	Angled Brackets	Free Angle Brackets	Free Angle Sheet Metal Brackets
Product Photo
Mounting Illustration
Angle	45 degrees, 135 degrees	Arbitrary Angle	Arbitrary Angle
Applicable Extrusion	8 Series 40 Square / 80 Square 8-45 Series 45 Square	8 Series 40 Square	8 Series 40 Square

Cleaning Process

· Degreasing (Part Number: SL-□□)

* Stainless steel products may be used with alkaline hot pure water. There is no change in cleanliness.
* If the surface treatment is low-temperature black chrome plating, IPA cleaning will be applied.

Working Environment: General environment
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water cleaning		Oil-free Compressor Used		Anti-rust single packing

· Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		Electrolytic polishing in an electrolytic polishing tank according to the material		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

Depending on some products and dimensions,
packaging type may vary.

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
SL-HBL45TS8-C-SST

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Angle	Cleaning Method	Extrusion Size	Mounting Hole Alteration for Covers	Accessory	Number of Extrusion Connection Holes	135° Bracket Counterboring
	MYR 39.77	1 Piece(s)	Available	6 Day(s) or more	45 °	Degreasing	For 40 and 45	C (Tapping for Cover Mounting)	SST (Stainless Steel Bolt and Nut Set)	2	N/A

App. Example

Basic Information

Extrusion Series	MISUMI 8 Series (10 mm Groove Width)	Material	A6N01SS-T5	Surface Treatment	Anodize
Bracket Type	Angled Brackets	Applicable Screws	M8 screw

Please check the type/dimensions/specifications of the part SL-HBL45TS8-C-SST in the [Clean & Pack] Angled Brackets for 8 Series (Slot Width 10 mm) series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

type
- SH-HBL135TD8
- SH-HBL135TS8
- SH-HBL45TD8
- SH-HBL45TS8
- SL-HBL135TD8
- SL-HBL135TS8
- SL-HBL45TD8
- SL-HBL45TS8
Clear
Angle
- 45 °
- 135 °
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
Clear
Extrusion Size
- For 40 and 45
- For 80
Clear
Mounting Hole Alteration for Covers
- C (Tapping for Cover Mounting)
- None
Clear
Accessory
None

SSP (Stainless Steel Bolt and Post-Assembly Insertion Spring Nut Set)

SST (Stainless Steel Bolt and Nut Set)

SSU (Stainless Steel Bolt and Pre-Assembly Insertion Spring Nut Set)
Clear
Number of Extrusion Connection Holes
- 2
- 4
Clear
135° Bracket Counterboring
- Z8 (Counterboring)
- N/A
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
SH-HBL135TD8-SSU
SH-HBL135TD8-Z8
SH-HBL135TS8
SL-HBL45TS8-C-SSU
SL-HBL45TS8-SSP
SL-HBL45TS8-SST

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Angle	Cleaning Method	Extrusion Size	Mounting Hole Alteration for Covers	Accessory	Number of Extrusion Connection Holes	135° Bracket Counterboring
MYR 71.11	1 Piece(s)	Available	6 Day(s) or more	135 °	Precision Cleaning	For 80	None	SSU (Stainless Steel Bolt and Pre-Assembly Insertion Spring Nut Set)	4	N/A
MYR 56.59	1 Piece(s)	Available	6 Day(s) or more	135 °	Precision Cleaning	For 80	None	None	4	Z8 (Counterboring)
MYR 37.14	1 Piece(s)	Available	6 Day(s) or more	135 °	Precision Cleaning	For 40 and 45	None	None	2	N/A
MYR 42.82	1 Piece(s)	Available	6 Day(s) or more	45 °	Degreasing	For 40 and 45	C (Tapping for Cover Mounting)	SSU (Stainless Steel Bolt and Pre-Assembly Insertion Spring Nut Set)	2	N/A
MYR 40.31	1 Piece(s)	Available	6 Day(s) or more	45 °	Degreasing	For 40 and 45	None	SSP (Stainless Steel Bolt and Post-Assembly Insertion Spring Nut Set)	2	N/A
MYR 38.41	1 Piece(s)	Available	6 Day(s) or more	45 °	Degreasing	For 40 and 45	None	SST (Stainless Steel Bolt and Nut Set)	2	N/A

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

[Clean & Pack] Angled Brackets for 8 Series (Slot Width 10 mm) (SL-HBL45TS8-C-SST)

(i)Caution

Specification Table

Alterations

Applicable Extrusion

App. Example

Product Comparison Information

Part Number

App. Example

Basic Information

Configure

Specification/Dimensions

type

Angle

Cleaning Method

Extrusion Size

Mounting Hole Alteration for Covers

Accessory

Number of Extrusion Connection Holes

135° Bracket Counterboring

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm