[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

[Clean & Pack] Angled Brackets for 6 Series (Slot Width 8 mm) (SL-HBL45TS6-C-SSP)

Volume Discount

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■ Part Number for Clean & Pack Products

· Degreasing (Anti-rust single packing)	: Part Number SL-□□
· Precision cleaning (Degassing double packing)	: Part Number SH-□□
· Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■ Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Extruded Brackets to connect extrusions at angles. It can be fixed at 45 and 135 degrees.

(i)Caution

Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Part Number

Configured Part Number is shown.

SL-HBL45TS6-C-SSP

Drawing/Specifications
3D Preview
Part Numbers
More Information

SL-HBL45TS6
SH-HBL45TS6

SL-HBL45TD6
SH-HBL45TD6

SL-HBL135TS6
SH-HBL135TS6

SL-HBL135TD6
SH-HBL135TD6

Part Number				[ M ] Material	[ S ] Surface treatment	Cleaning Method
45 Degree Single	45 Degree Double	135 Degree Single	135 Degree Double	[ M ] Material	[ S ] Surface treatment	Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-HBL45TS6	SL-HBL45TD6	SL-HBL135TS6	SL-HBL135TD6	A6N01SS−T5	Anodize	Degreasing	General environment	Anti-rust packing	General environment
SH-HBL45TS6	SH-HBL45TD6	SH-HBL135TS6	SH-HBL135TD6	A6N01SS−T5	Anodize	Precision cleaning	Class 1,000	Degassing double packing	Class 10

[!] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ]See the details of precision cleaning and electrolytic polishing shown at the bottom of the

specification table.

Specification Table

Part Number

SL-HBL45TS6

Part Number	Mass	Applicable Screw, T Nut				Allowable Load
	(g)					(N)
		Screws	Quantity	T Nut	Quantity
SL-HBL45TS6	58	SCB6-15	2	HNTTSN6-6	2	1176
SH-HBL45TS6
SL-HBL45TD6	147		4		4	1960
SH-HBL45TD6
SL-HBL135TS6	68		2		2	1176
SH-HBL135TS6
SL-HBL135TD6	172		4		4	1960
SH-HBL135TD6

Alterations

Part Number	—	(C·SST·SSU·SSP·Z6)
HBL45TS6	—	SST

Alterations	Code	Spec.	Applicable Bracket
Mounting Hole Alteration for Cover	C	Adds taps on a bracket for cover mounting. (M5 on Both Sides, Depth 15 mm) (Mounting Screw HCBM)	HBL45TS6 HBL45TD6 HBL135TS6
135 Degree Bracket Counterboring	Z6	135 Degree Bracket Machine 2 counterbored holes on HBL135T□6. (Applicable Screws: M6) [NG] Not available in combination with Applicable Screws and Nuts	HBL135TS6
135 Degree Bracket Counterboring	Z6		HBL135TD6

Alterations

Code

Spec.

Applicable Bracket

Applicable Screws and Nuts Set

SST
(Stainless Steel)
SSU
(Pre-Assembly Insertion
Spring Nuts Stainless Steel)
Stainless Steel)
SSP
(Post-Assembly
Spring Nuts
Stainless Steel)

Applicable screws and nuts for fixing the brackets on extrusions come in a set.
　
Example: When HBL45TS6 is specified

	Screws		Nut
Code	Part Number	Quantity	Part Number	Quantity
SST	SCB6－15	2	HNTTSN6－6	2
SSU	SCB6－15		SHNTU6－6
SSP	SCB6－15		SHNTP6－6

[ ! ] When specifying other than HBL45TS6, check for the applicable screws and nuts respectively.
　
　

HBL45TS6

HBL45TD6

HBL135TS6

HBL135TD6

[ ! ] The part numbers are those of the products before cleaning.

Alteration Details

■Set of applicable Screws and Nuts Details

Alteration part number	Screws		Nut
Alteration part number	Part Number (Diameter only)	Material	Type	Part Number	Material	Stopper
SST	SCB6-15	Stainless Steel	Pre-Assembly	HNTTSN6-6	Stainless Steel	None
SSU	SCB6-15	Stainless Steel	Pre-Assembly	SHNTU6-6	Stainless Steel	Provided
SSP	SCB6-15	Stainless Steel	Post-Assembly	SHNTP6-6	Stainless Steel	Provided

For 30 Square Extrusion (HBL45TS6, HBL135TS6), 2 screws and 2 nuts each.
For 60 Square Extrusion (HBL45TD6, HBL135TD6), 4 screws and nuts are included.

Main body only if no accessories are included. Please choose nuts and screws.

Applicable Extrusion

HBL45TS6, HBL135TS6: 6 Series 30 Square Extrusion
HBL45TD6, HBL135TD6: 6 Series 60 Square Extrusion

App. Example

·You can mount it neatly by making a 45 degree cut alteration on the aluminum extrusion.

Product Comparison Information

■6 Series Angled Brackets

Product Name	Angled Brackets	Free Angle Brackets	Free Angle Sheet Metal Brackets
Product Photo
Mounting Illustration
Angle	45 degrees, 135 degrees	Arbitrary Angle	Arbitrary Angle
Applicable Extrusion	6 Series 30 Square, 60 Square	6 Series 30 Square	6 Series 30 Square

Cleaning Process

· Degreasing (Part Number: SL-□□)

* Stainless steel products may be used with alkaline hot pure water. There is no change in cleanliness.
* If the surface treatment is low-temperature black chrome plating, IPA cleaning will be applied.

Working Environment: General environment
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water cleaning		Oil-free Compressor Used		Anti-rust single packing

· Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		Electrolytic polishing in an electrolytic polishing tank according to the material		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

Depending on some products and dimensions,
packaging type may vary.

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
SL-HBL45TS6-C-SSP

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Angle	Cleaning Method	Mounting Hole Alteration for Covers	Accessory	Number of Extrusion Connection Holes	135° Bracket Counterboring
	MYR 37.49	1 Piece(s)	Available	6 Day(s) or more	45 °	Degreasing	C (Tapping for Cover Mounting)	SSP (Stainless Steel Bolt and Post-Assembly Insertion Spring Nut Set)	2	N/A

App. Example

Basic Information

Extrusion Series	MISUMI 6 Series (8 mm Groove Width)	Material	A6N01SS-T5	Surface Treatment	Anodize
Extrusion Size	For 30· 50· 60	Bracket Type	Angled Brackets	Applicable Screws	M6 screw

Please check the type/dimensions/specifications of the part SL-HBL45TS6-C-SSP in the [Clean & Pack] Angled Brackets for 6 Series (Slot Width 8 mm) series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

type
- SH-HBL135TD6
- SH-HBL135TS6
- SH-HBL45TD6
- SH-HBL45TS6
- SL-HBL135TD6
- SL-HBL135TS6
- SL-HBL45TD6
- SL-HBL45TS6
Clear
Angle
- 45 °
- 135 °
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
Clear
Mounting Hole Alteration for Covers
- C (Tapping for Cover Mounting)
- None
Clear
Accessory
None

SSP (Stainless Steel Bolt and Post-Assembly Insertion Spring Nut Set)

SST (Stainless Steel Bolt and Nut Set)

SSU (Stainless Steel Bolt and Pre-Assembly Insertion Spring Nut Set)
Clear
Number of Extrusion Connection Holes
- 2
- 4
Clear
135° Bracket Counterboring
- Z6 (Counterboring)
- N/A
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
SH-HBL135TD6-SSU
SH-HBL135TD6-Z6
SH-HBL135TS6
SL-HBL45TS6-C-SST
SL-HBL45TS6-C-SSU
SL-HBL45TS6-SSP

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Angle	Cleaning Method	Mounting Hole Alteration for Covers	Accessory	Number of Extrusion Connection Holes	135° Bracket Counterboring
MYR 63.21	1 Piece(s)	Available	6 Day(s) or more	135 °	Precision Cleaning	None	SSU (Stainless Steel Bolt and Pre-Assembly Insertion Spring Nut Set)	4	N/A
MYR 53.64	1 Piece(s)	Available	6 Day(s) or more	135 °	Precision Cleaning	None	None	4	Z6 (Counterboring)
MYR 33.32	1 Piece(s)	Available	6 Day(s) or more	135 °	Precision Cleaning	None	None	2	N/A
MYR 35.26	1 Piece(s)	Available	6 Day(s) or more	45 °	Degreasing	C (Tapping for Cover Mounting)	SST (Stainless Steel Bolt and Nut Set)	2	N/A
MYR 38.58	1 Piece(s)	Available	6 Day(s) or more	45 °	Degreasing	C (Tapping for Cover Mounting)	SSU (Stainless Steel Bolt and Pre-Assembly Insertion Spring Nut Set)	2	N/A
MYR 35.58	1 Piece(s)	Available	6 Day(s) or more	45 °	Degreasing	None	SSP (Stainless Steel Bolt and Post-Assembly Insertion Spring Nut Set)	2	N/A

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

[Clean & Pack] Angled Brackets for 6 Series (Slot Width 8 mm) (SL-HBL45TS6-C-SSP)

(i)Caution

Specification Table

Alterations

Alteration Details

Applicable Extrusion

App. Example

Product Comparison Information

Part Number

App. Example

Basic Information

Configure

Specification/Dimensions

type

Angle

Cleaning Method

Mounting Hole Alteration for Covers

Accessory

Number of Extrusion Connection Holes

135° Bracket Counterboring

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm