[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

[Clean & Pack] Angled Bracket for 5 Series (Slot Width 6 mm) (SL-HBL45TD5-SSU)

Volume Discount

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■ Part Number for Clean & Pack Products

· Degreasing (Anti-rust single packing)	: Part Number SL-□□
· Precision cleaning (Degassing double packing)	: Part Number SH-□□
· Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■ Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Extruded Brackets to connect extrusions at angles. It can be fixed at 45 and 135 degrees.

(i)Caution

Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Part Number

Configured Part Number is shown.

SL-HBL45TD5-SSU

Drawing/Specifications
3D Preview
Part Numbers
More Information

SL-HBL45TS5 SH-HBL45TS5	SL-HBL45TD5 SH-HBL45TD5
SL-HBL135TS5 SH-HBL135TS5	SL-HBL135TD5 SH-HBL135TD5

Part Number				[ M ] Material	[ S ] Surface treatment	Cleaning Method
45 Degree Single	45 Degree Double	135 Degree Single	135 Degree Double	[ M ] Material	[ S ] Surface treatment	Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-HBL45TS5	SL-HBL45TD5	SL-HBL135TS5	SL-HBL135TD5	A6N01SS−T5	Anodize	Degreasing	General environment	Anti-rust packing	General environment
SH-HBL45TS5	SH-HBL45TD5	SH-HBL135TS5	SH-HBL135TD5	A6N01SS−T5	Anodize	Precision cleaning	Class 1,000	Degassing double packing	Class 10

[!] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ]See the details of precision cleaning and electrolytic polishing shown at the bottom of the

specification table.

Specification Table

Part Number

SL-HBL45TS5

Part Number	Mass	Applicable Screw, T Nut				Allowable Load
	(g)	Screws	Quantity	T Nut	Quantity	(N)
SL-HBL45TS5	41	SCB5-14	2	HNTTBS5-5	2	833
SH-HBL45TS5
SL-HBL45TD5	100		4		4	1470
SH-HBL45TD5
SL-HBL135TS5	48		2		2	833
SH-HBL135TS5
SL-HBL135TD5	118		4		4	1470
SH-HBL135TD5

Alterations

Part Number	—	(C·SST·SSU·SSP·Z5)
HBL45TS5	—	SST

Alterations	Code	Spec.					Applicable Bracket
Mounting Hole Alteration for Cover	C	Adds taps on a bracket for cover mounting.					HBL45TS5
							HBL135TS5
		(M5 on Both Sides, Depth 15 mm)
		(Mounting Screw HCBM)
Applicable Screws and Nuts Set		Applicable screws and nuts for fixing the brackets on extrusions come in a set.
	SST
	(Stainless Steel)
		Example: When HBL45TS5 is specified
			Screws		Nut
	SSU	Code	Part Number	Quantity	Part Number	Quantity
	(Pre-Assembly Insertion	SST	SCB5－14	2	HNTTBS5－5	2
	Spring Nuts
	Stainless Steel)	SSU	SCB5－14		SHNTU5－5

		SSP	SCB5－14		SHNTP5－5

	SSP	[ ! ] When specifying other than HBL45TS5, check for the applicable screws and nuts.					HBL45TS5
	(Post-Assembly Insertion						HBL45TD5
	Spring Nuts						HBL135TS5
	Stainless Steel)						HBL135TD5
135 Degree Bracket	Z5	135 Degree Bracket					HBL135TS5
Counterboring		2 Counterbore holes for HBL135T□5.
		(Applicable Screw M5)


		[NG] Not available in combination with Applicable Screws and Nuts					HBL135TD5

[ ! ] The part numbers are those of the products before cleaning.

Alteration Details

■Set of applicable Screws and Nuts Details

Alteration part number	Screws		Nut
Alteration part number	Part Number (Diameter only)	Material	Type	Part Number	Material	Stopper
SST	SCB5-14	Stainless Steel	Pre-Assembly	HNTTBS5-5	Stainless Steel	None
SSU	SCB5-14	Stainless Steel	Pre-Assembly	SHNTU5-5	Stainless Steel	Provided
SSP	SCB5-14	Stainless Steel	Post-Assembly	SHNTP5-5	Stainless Steel	Provided

For 1 Slot extrusion (HBL45TS5, HBL135TS5), two screws and two nuts each.
For 2 Slots 40 Square extrusion (HBL45TD5, HBL135TD5), 4 screws and nuts are included.

Main body only if no accessories are included. Please choose nuts and screws.

Applicable Extrusion

HBL45TS5, HBL135TS5: For 5 Series 1 Slot
HBL45TD5, HBL135TD5: For 5 Series 2 Slot (40 Square)

App. Example

·You can mount it neatly by making a 45 degree cut alteration on the aluminum extrusion.

■Example: 45 Degree Angle Bracket

Product Comparison Information

■5 Series Angled Brackets

Product Name	Angled Brackets	Free Angle Brackets
Product Photo
Mounting Illustration
Angle	45 degrees, 135 degrees	Arbitrary Angle
Applicable Extrusion	5 Series 20 Square, 40 Square	5 Series 20 Square

Cleaning Process

· Degreasing (Part Number: SL-□□)

* Stainless steel products may be used with alkaline hot pure water. There is no change in cleanliness.
* If the surface treatment is low-temperature black chrome plating, IPA cleaning will be applied.

Working Environment: General environment
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water cleaning		Oil-free Compressor Used		Anti-rust single packing

· Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		Electrolytic polishing in an electrolytic polishing tank according to the material		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

Depending on some products and dimensions,
packaging type may vary.

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
SL-HBL45TD5-SSU

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Angle	Cleaning Method	Mounting Hole Alteration for Covers	Accessory	Number of Extrusion Connection Holes	135° Bracket Counterboring
	MYR 49.20	1 Piece(s)	Available	6 Day(s) or more	45 °	Degreasing	None	SSU (Stainless Steel Bolt and Pre-Assembly Insertion Spring Nut Set)	4	N/A

App. Example

■Example: 45 Degree Angle Bracket

Basic Information

Extrusion Series	MISUMI 5 Series (6 mm Groove Width)	Material	A6N01SS-T5	Surface Treatment	Clear Anodize
Extrusion Size	For 20 and 40	Bracket Type	Angled Brackets	Applicable Screws	M5 screw

Please check the type/dimensions/specifications of the part SL-HBL45TD5-SSU in the [Clean & Pack] Angled Bracket for 5 Series (Slot Width 6 mm) series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

type
- SH-HBL135TD5
- SH-HBL135TS5
- SH-HBL45TD5
- SH-HBL45TS5
- SL-HBL135TD5
- SL-HBL135TS5
- SL-HBL45TD5
- SL-HBL45TS5
Clear
Angle
- 45 °
- 135 °
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
Clear
Mounting Hole Alteration for Covers
- C (Tapping for Cover Mounting)
- None
Clear
Accessory
None

SSP (Stainless Steel Bolt and Post-Assembly Insertion Spring Nut Set)

SST (Stainless Steel Bolt and Nut Set)

SSU (Stainless Steel Bolt and Pre-Assembly Insertion Spring Nut Set)
Clear
Number of Extrusion Connection Holes
- 2
- 4
Clear
135° Bracket Counterboring
- Z5 (Counterboring)
- N/A
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
SH-HBL135TD5-SSU
SH-HBL135TD5-Z5
SH-HBL135TS5
SL-HBL45TS5
SL-HBL45TS5-C
SL-HBL45TS5-C-SSP

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Angle	Cleaning Method	Mounting Hole Alteration for Covers	Accessory	Number of Extrusion Connection Holes	135° Bracket Counterboring
MYR 53.72	1 Piece(s)	Available	6 Day(s) or more	135 °	Precision Cleaning	None	SSU (Stainless Steel Bolt and Pre-Assembly Insertion Spring Nut Set)	4	N/A
MYR 50.98	1 Piece(s)	Available	6 Day(s) or more	135 °	Precision Cleaning	None	None	4	Z5 (Counterboring)
MYR 32.78	1 Piece(s)	Available	6 Day(s) or more	135 °	Precision Cleaning	None	None	2	N/A
MYR 27.33	1 Piece(s)	Available	6 Day(s) or more	45 °	Degreasing	None	None	2	N/A
MYR 30.60	1 Piece(s)	Available	6 Day(s) or more	45 °	Degreasing	C (Tapping for Cover Mounting)	None	2	N/A
MYR 33.65	1 Piece(s)	Available	6 Day(s) or more	45 °	Degreasing	C (Tapping for Cover Mounting)	SSP (Stainless Steel Bolt and Post-Assembly Insertion Spring Nut Set)	2	N/A

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

[Clean & Pack] Angled Bracket for 5 Series (Slot Width 6 mm) (SL-HBL45TD5-SSU)

(i)Caution

Specification Table

Alterations

Alteration Details

Applicable Extrusion

App. Example

Product Comparison Information

Part Number

App. Example

Basic Information

Configure

Specification/Dimensions

type

Angle

Cleaning Method

Mounting Hole Alteration for Covers

Accessory

Number of Extrusion Connection Holes

135° Bracket Counterboring

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm