[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

[Clean & Pack]Shaft Collar - D Cut, Standard, Compact, Clamp (SH-SDSAJ30)

Volume Discount

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■Part Number for Clean & Pack Products

・Degreasing (Anti-rust single packing)	: Part Number SL-□□
・Precision cleaning (Degassing double packing)	: Part Number SH-□□
・Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust Packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Mounting holes on a flat side facilitate installation of sensor brackets.

(i)Caution

Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Part Number

Configured Part Number is shown.

SH-SDSAJ30

Drawing/Specifications
3D Preview
Part Numbers
More Information

■Standard, Clamp

■Compact, Clamp

* D8 to D25:C0.5
D30 to D50:C1

* D10 to D25:C0.5
D30:C1

Type		[M] Material	[S] Surface Treatment	[A]Accessory	Cleaning Method
Standard	Compact	[M] Material	[S] Surface Treatment	Hex Socket Head Cap Screw 1 pc.	Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-SDSA	SL-SDSAJ	2000 Series Aluminum Alloy	-	[M]SUS304 Equivalent	Degreasing	General environment	Anti-rust Packing	General environment
SH-SDSA	SH-SDSAJ		-		Precision cleaning	Class 1,000	Degassing double packing	Class 10
SL-SDSAW	SL-SDSAWJ		Clear Anodize		Degreasing	General environment	Anti-rust Packing	General environment
SH-SDSAW	SH-SDSAWJ		Clear Anodize		Precision cleaning	Class 1,000	Degassing double packing	Class 10

[ ! ] Clamping is applied to only D8 to 15 for standard type.
[ ! ] Refer to Size Comparison Table below
[!] Products are packed by order quantity. Ex. If the order is for 20-pieces, they are packed in one package (incl. 20-pieces).
[ ! ] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the

specification table.

Specification Table

Part Number

SL-SDSA8

Part Number		D₁	B	M	d	R	H	M₁	P	h	W	X	Y	(Z)
Type	D	D₁	B	(Coarse)	d	R	H	(Coarse)	P	h	W	X	Y	(Z)
Standard Clamp SL-SDSA SH-SDSA SL-SDSAW SH-SDSAW	8	30	15	M5	5.5	4.5	13	M3	8	7	1.5	10	6	8
	10	35	15	M5	5.5	4.5	15	M4	10	7	1.5	11.5	6	10
	12	35	15	M5	5.5	4.5	15	M4	10	7	1.5	11.5	6	10
	15	40	15	M6	7	6	17	M5	12	7	1.5	13	8	12
	16	40	15	M6	7	6	17	M5	12	7	1.5	13	8	12
	20	45	15	M6	7	6	18.5	M5	15	9	1.5	15	8	13
	25	50	15	M6	7	6	21	M5	20	10	1.5	18	10	16
	30	55	15	M6	7	6	23.5	M6	21	10	1.5	20	10	18

[ ! ]The effective M₁ thread depth is 7-mm (pilot hole through).

Part Number		D₁	B	M	d	R	H	M₁	P	h	W	X	Y	(Z)
Type	D	D₁	B	(Coarse)	d	R	H	(Coarse)	P	h	W	X	Y	(Z)
Compact Clamp SL-SDSAJ SH-SDSAJ SL-SDSAWJ SH-SDSAWJ	10	30	8	M3	3.4	3	12	M3	8	5	1.5	9	5	8 to 10
	12	30	8	M3	3.4	3	12	M3	8	5	1.5	10	5	9 to 10
	15	30	8	M3	3.4	3	12	M3	10	5	1.5	11	3	11
	16	30	8	M3	3.4	3	12	M3	10	4.8	1.5	11.5	3	11
	20	35	8	M3	3.4	3	15	M3	10	5	1.5	13	5	13
	25	42	10	M4	4.5	3.75	18.5	M4	12	6	1.5	16.5	5	16.5
	30	50	12	M5	5.5	4.5	22	M4	12	6	1.5	20	6	20

[!]The effective M₁ thread depth is 7 mm (pilot hole through).
[!] Size Comparison Table

D	Size Differences		Compact		Standard
D	B (Thickness)	D₁ (O.D.)	B (Thickness)	D₁ (O.D.)	B (Thickness)	D₁ (O.D.)
10	−7	−5	8	30	15	35
12	−7	−5	8	30	15	35
15	−7	−10	8	30	15	40
16	−7	−10	8	30	15	40
20	−7	−10	8	35	15	45
25	−5	−8	10	42	15	50
30	−3	−5	12	50	15	55

Cleaning Process

· Degreasing (Part Number: SL-□□)

* Stainless steel products may be used with alkaline hot pure water. There is no change in cleanliness.
* If the surface treatment is low-temperature black chrome plating, IPA cleaning will be applied.

Working Environment: General environment
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water cleaning		Oil-free Compressor Used		Anti-rust single packing

· Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		Electrolytic polishing with an electrolytic polishing layer according to the material		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

Depending on some products and dimensions,
packaging type may vary.

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
SH-SDSAJ30

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	I.D. (mm)	O.D. (mm)	Width (mm)	Surface Treatment	Thickness	Cleaning Method
	MYR 92.39	1 Piece(s)	Available	6 Day(s) or more	30	50	12	No Surface Treatment	Compact Type	Precision Cleaning

App. Example

Basic Information

Fastening Method	Slit	Specifications	D Cut	Material	2000 Series Aluminum Alloy
Side Milling	Not Provided

Please check the type/dimensions/specifications of the part SH-SDSAJ30 in the [Clean & Pack]Shaft Collar - D Cut, Standard, Compact, Clamp series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

type
- SH-SDSA
- SH-SDSAJ
- SH-SDSAW
- SH-SDSAWJ
- SL-SDSA
- SL-SDSAJ
- SL-SDSAW
- SL-SDSAWJ
Clear
I.D.(mm)
8

10

12

15

16

20

25

30
Clear
O.D.(mm)
30

35

40

42

45

50

55
Clear
Width(mm)
8

10

12

15
Clear
Surface Treatment
- No Surface Treatment
- Surface Treatment
  - Clear Anodize
Clear
Thickness
- Standard Type
- Compact Type
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
SH-SDSA16
SH-SDSA20
SH-SDSA25
SH-SDSAW10
SH-SDSAW12
SH-SDSAW15

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	I.D. (mm)	O.D. (mm)	Width (mm)	Surface Treatment	Thickness	Cleaning Method
MYR 83.15	1 Piece(s)	Available	6 Day(s) or more	16	40	15	No Surface Treatment	Standard Type	Precision Cleaning
MYR 84.52	1 Piece(s)	Available	6 Day(s) or more	20	45	15	No Surface Treatment	Standard Type	Precision Cleaning
MYR 89.31	1 Piece(s)	Available	6 Day(s) or more	25	50	15	No Surface Treatment	Standard Type	Precision Cleaning
MYR 86.57	1 Piece(s)	Available	6 Day(s) or more	10	35	15	[Surface Treatment] Clear Anodize	Standard Type	Precision Cleaning
MYR 86.57	1 Piece(s)	Available	6 Day(s) or more	12	35	15	[Surface Treatment] Clear Anodize	Standard Type	Precision Cleaning
MYR 90.68	1 Piece(s)	Available	6 Day(s) or more	15	40	15	[Surface Treatment] Clear Anodize	Standard Type	Precision Cleaning

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

[Clean & Pack]Shaft Collar - D Cut, Standard, Compact, Clamp (SH-SDSAJ30)

(i)Caution

Specification Table

Part Number

App. Example

Basic Information

Configure

Specification/Dimensions

type

I.D.(mm)

O.D.(mm)

Width(mm)

Surface Treatment

Thickness

Cleaning Method

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm