(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Loading

  • [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
  • [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Locating Pin Large Head, Selectable Tapered Angle, Selectable Tolerance, Threaded (Part Numbers)

Locating Pin Large Head, Selectable Tapered Angle, Selectable Tolerance, Threaded

MISUMI

MiSUMi Economy

MISUMI

Part Number

Configured Part Number is shown.

Product Overview
The positioning pin is used for the spatial positioning in the directions of X and Y axes, mainly using the workpiece hole as the positioning benchmark or used in conjunction with bushings, in which the large head tapered specified tolerance selection type offers flexible selection and can meet most customer design requirements.
 
Dimensional Drawing
MISUMI Positioning Pin Specifications and Dimensional Drawing Large Head Round
 
■Material Specification Table
Material No. Material Surface Treatment HardnessTypeShape Symbol
Male Thread Type
①SKS3 Equivalent-Quenching hardness 60 to 63HRCE-KFNA(Round)
D(Polygonal)
②SKS3 EquivalentHard Chrome PlatedQuenching hardness 50–55HRC
Coating hardness 750HV–		E-GKFN
③SKS3 Equivalent--E-BKFN
④SUS304 Equivalent--E-SKFN
⑤SUS304 EquivalentHard Chrome PlatedCoating Hardness 750HV or moreE-HKFN
If there are requirements for rust prevention, give priority to products with hard chrome plating, electroless nickel plating surface treatment, or made of austenitic stainless steel.
E-BKFN series products are temporarily unavailable for polygonal manufacturing. We apologize for the inconvenience!
 
Specifications Overview
 
■Tolerance Selection
D or PNormalPrecision
MPGHSAB
m7p7g7h7---
1 to 3+0.012
+0.002		+0.018
+0.009		-0.003
-0.012		0
-0.01		0
-0.02		+0.005
0		0
-0.005
3.01 to 6+0.016
+0.004		+0.024
+0.012		-0.004
-0.016		0
-0.012
6.01 to 10+0.021
+0.006		+0.030
+0.015		-0.005
-0.020		0
-0.015
10.01 to 18+0.025
+0.007		+0.036
+0.018		-0.006
-0.024		0
-0.018
18.01 to 30+0.029
+0.008		+0.043
+0.022		-0.007
-0.028		0
-0.021
Precision grade tolerance cannot be selected for hard chrome plated products.
The D section of the austenitic stainless steel type has an identification groove.
Austenitic stainless steel may be ground or have no center hole.
P-2EtanA ≥ 0.73 (Front end diameter ⌀0.73 or larger)
 Reference: tan15° ≈0.267  tan30° ≈0.577
 tan45° = 1  tan60° ≈1.732
 
Specification Table
Part NumberP
Can be specified down to 0.01 mm increments		L
can be specified down to 1 mm increments		B
Can be specified down to 0.1 mm increments		E
Can be specified down to 0.1 mm increments		A
Selection		M
(Coarse Thread)		(W)
TypeShapeD tolerance
Selection		P Tolerance
Select		D
Male Thread Type
E-KFN
E-GKFN*
E-BKFN
E-SKFN
E-HKFN*		A(Round)



D(Polygonal)		M
P
G
H
* A
* B		S
M
P
G
H
* A
* B		33.50 to 8.000 to 62.0 to 10.00.5 to 15.015

30

45

60		M 31.5
44.50 to 8.000 to 82.0 to 10.0M 41.8
55.50 to 8.000 to 102.0 to 15.0 (10.0)M 52.2
66.50 to 10.000 to 102.0 to 15.0M 63
88.50 to 15.000 to 102.0 to 30.0 (15.0)M 83.5
1011.00 to 17.000 to 153.0 to 30.0 (25.0)M104
1213.00 to 20.00 (18.00)0 to 153.0 to 30.0 (25.0)M125
1617.00 to 27.000 to 205.0 to 30.0M167
2022.00 to 30.000 to 205.0 to 30.0M209
P·L·B() dimensions are suitable for polygonal types.
When L=0, there is an incomplete thread section with no undercut groove.
Since the front-end diameter must be greater than ⌀0.73, P, E, and A must satisfy the following condition formula. P —2EtanA ≥ 0.73 Reference: tan15° ≈0.267, tan30° ≈0.577, tan45° =1, tan60° ≈1.732
Hard chrome plated products cannot select tolerance symbols with * (Precision Grade A, B)
E-BKFN series products are temporarily unable to support polygonal manufacturing. We appreciate your understanding!
 
Product Features
Usage outline of large head tapered angle specified type positioning pins Locating PinsFeature 1: Standard type with tapered lead-in part. For press-fit use.
Feature 2: Round and polygonal head types are available; you can freely specify the tolerance for the lead-in and installation sections: m7, p7, g7, h7, 0/-0.02.
Feature 3: Optional materials: Iron (alloy tool steel or bearing steel); austenitic stainless steel, martensitic stainless steel, suitable for positioning various workpieces.
Feature 4: Hard chrome plated surface, effectively ensuring surface hardness and antirust.
 
Precautions
(1) Dimensional Tolerance and Fit Parameter Table For details, click Dimensional Tolerance and Fit Table
(2) Reference Table for General Dimensions without Indicated Tolerance (Medium Precision m) For details, click Reference Table for Dimensions without Indicated Tolerance
(3) Reference Values for Thread Installation Torque The tightening torque (reference value) is technical data for the Thread Torque Reference Value tightening torque strength classification (8.8), with the tightened state maintained for more than 24 hours. Not applicable when using a relaxant or spring washer.
 
Example of Use
Examples of Positioning FixturesCase Introduction: Combination of Round and Polygonal Positioning
   (1) The combination of round and polygonal shapes in clamping jigs can make positioning in direction A more accurate and reduce the spacing error of matching holes in direction B.
(2) One of the two pins uses a cylindrical shape as a reference, while the other uses a circular flat (polygonal) shape in the direction of the center distance between the two holes. This not only facilitates installation/removal, but also ensures positioning accuracy.
(3) Two dowels of different heights can be used: insert the taller dowel for preliminary positioning, then insert the shorter dowel for precise positioning.
 
Application Industries
Lithium battery Semiconductor Medical
Application of positioning pins in lithium battery industry Use of positioning pins in semiconductor industry Large head tapered angle positioning pins in medical industry
Smart phone Electronic & Electrical Appliances Robotics
Positioning pins in smartphone manufacturing Application of press-fit type positioning pins in 3C electronic and electrical appliances industry Application of positioning pins on robotic automation equipment
 
Related Products
(Economy series) Bushing for positioning pin Shouldered (Economy series) Bushing for positioning pin Straight type Economy type Bushing for positioning pin Slotted hole type Shouldered type
MISUMI original standard fixture bushing Jig Bushing MISUMI brand fixture bushing Jig Bushing MISUMI brand fixture bushing Jig Bushing
Typical model: JBH6-8 Typical model: JBA3-8 Typical Model: JBPE10-P6.8-W4.82-L15
Advantages: suitable for situations where the height is difficult to adjust Advantages: Widely used in standard shapes Advantages: absorbs clearance errors
 
Related Documents
(1) Positioning technical reference information Click Positioning Information Reference
(2) Surface treatment rust prevention capability salt spray test reference Click Metal Surface Rust Prevention Treatment Reference

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
60
90
  1. << Prev
  2. 10
  3. 11
  4. 12
  5. 13
  6. 14
  7. Next >>
Part Number
E-HKFNDHP3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDHP4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDHP5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDHP6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDHP8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDHP10-P[11-15/0.01]-L[0-15/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDHP12-P[13-18/0.01]-L[0-15/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDHP16-P[17-25/0.01]-L[0-20/1]-B[5-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDHP20-P[22-30/0.01]-L[0-20/1]-B[5-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDHS3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDHS4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDHS5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDHS6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDHS8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDHS10-P[11-15/0.01]-L[0-15/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDHS12-P[13-18/0.01]-L[0-15/1]-B[3-20/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
E-HKFNDHS16-P[17-25/0.01]-L[0-20/1]-B[5-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDHS20-P[22-30/0.01]-L[0-20/1]-B[5-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMG3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMG4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMG5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMG6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMG8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMG10-P[11-15/0.01]-L[0-15/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMG12-P[13-18/0.01]-L[0-15/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMG16-P[17-25/0.01]-L[0-20/1]-B[5-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMG20-P[22-30/0.01]-L[0-20/1]-B[5-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMH3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMH4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMH5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMH6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMH8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMH10-P[11-15/0.01]-L[0-15/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMH12-P[13-18/0.01]-L[0-15/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMH16-P[17-25/0.01]-L[0-20/1]-B[5-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMH20-P[22-30/0.01]-L[0-20/1]-B[5-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMM3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMM4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMM5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMM6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMM8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMM10-P[11-15/0.01]-L[0-15/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMM12-P[13-18/0.01]-L[0-15/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMM16-P[17-25/0.01]-L[0-20/1]-B[5-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMM20-P[22-30/0.01]-L[0-20/1]-B[5-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMP3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMP4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMP5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMP6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMP8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMP10-P[11-15/0.01]-L[0-15/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMP12-P[13-18/0.01]-L[0-15/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMP16-P[17-25/0.01]-L[0-20/1]-B[5-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMP20-P[22-30/0.01]-L[0-20/1]-B[5-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMS3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMS4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMS5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMS6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMS8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMS10-P[11-15/0.01]-L[0-15/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMS12-P[13-18/0.01]-L[0-15/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMS16-P[17-25/0.01]-L[0-20/1]-B[5-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDMS20-P[22-30/0.01]-L[0-20/1]-B[5-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPG3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPG4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPG5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPG6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1]-E[0.5-15/0.1]-A[15,​30,​45,​60]
E-HKFNDPG8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPG10-P[11-15/0.01]-L[0-15/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPG12-P[13-18/0.01]-L[0-15/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPG16-P[17-25/0.01]-L[0-20/1]-B[5-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPG20-P[22-30/0.01]-L[0-20/1]-B[5-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPH3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPH4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPH5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPH6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPH8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPH10-P[11-15/0.01]-L[0-15/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPH12-P[13-18/0.01]-L[0-15/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPH16-P[17-25/0.01]-L[0-20/1]-B[5-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPH20-P[22-30/0.01]-L[0-20/1]-B[5-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPM3-P[3.5-6/0.01]-L[0-6/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPM4-P[4.5-7/0.01]-L[0-8/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPM5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPM6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPM8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPM10-P[11-15/0.01]-L[0-15/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPM12-P[13-18/0.01]-L[0-15/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPM16-P[17-25/0.01]-L[0-20/1]-B[5-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
E-HKFNDPM20-P[22-30/0.01]-L[0-20/1]-B[5-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipInsertion Guide Tip Shape Surface Treatment Heat Treatment Steel Type Mounting Side Outer Dia. D
(mm) 		Locating Pin-Mounting Section P
(mm) 		Taper Length E
(mm) 		Positioning Side O.D. Tolerance Mounting Side Tolerance Installation Part Length L
(mm) 		Length of Positioning Portion B
(mm) 		A
(°)

-

1 Piece(s) 4 Day(s) -----3.5 ～ 60.5 ～ 10--0 ～ 62 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----4.5 ～ 70.5 ～ 10--0 ～ 82 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----5.5 ～ 80.5 ～ 10--0 ～ 102 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----6.5 ～ 100.5 ～ 10--0 ～ 102 ～ 1215 ～ 60

-

1 Piece(s) 4 Day(s) -----9 ～ 130.5 ～ 10--0 ～ 102 ～ 1515 ～ 60

-

1 Piece(s) 4 Day(s) -----11 ～ 150.5 ～ 10--0 ～ 153 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----13 ～ 180.5 ～ 10--0 ～ 153 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----17 ～ 250.5 ～ 10--0 ～ 205 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----22 ～ 300.5 ～ 10--0 ～ 205 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----3.5 ～ 60.5 ～ 10--0 ～ 62 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----4.5 ～ 70.5 ～ 10--0 ～ 82 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----5.5 ～ 80.5 ～ 10--0 ～ 102 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----6.5 ～ 100.5 ～ 10--0 ～ 102 ～ 1215 ～ 60

-

1 Piece(s) 4 Day(s) -----9 ～ 130.5 ～ 10--0 ～ 102 ～ 1515 ～ 60

-

1 Piece(s) 4 Day(s) -----11 ～ 150.5 ～ 10--0 ～ 153 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----13 ～ 180.5 ～ 15--0 ～ 153 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----17 ～ 250.5 ～ 10--0 ～ 205 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----22 ～ 300.5 ～ 10--0 ～ 205 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----3.5 ～ 60.5 ～ 10--0 ～ 62 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----4.5 ～ 70.5 ～ 10--0 ～ 82 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----5.5 ～ 80.5 ～ 10--0 ～ 102 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----6.5 ～ 100.5 ～ 10--0 ～ 102 ～ 1215 ～ 60

-

1 Piece(s) 4 Day(s) -----9 ～ 130.5 ～ 10--0 ～ 102 ～ 1515 ～ 60

-

1 Piece(s) 4 Day(s) -----11 ～ 150.5 ～ 10--0 ～ 153 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----13 ～ 180.5 ～ 10--0 ～ 153 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----17 ～ 250.5 ～ 10--0 ～ 205 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----22 ～ 300.5 ～ 10--0 ～ 205 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----3.5 ～ 60.5 ～ 10--0 ～ 62 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----4.5 ～ 70.5 ～ 10--0 ～ 82 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----5.5 ～ 80.5 ～ 10--0 ～ 102 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----6.5 ～ 100.5 ～ 10--0 ～ 102 ～ 1215 ～ 60

-

1 Piece(s) 4 Day(s) -----9 ～ 130.5 ～ 10--0 ～ 102 ～ 1515 ～ 60

-

1 Piece(s) 4 Day(s) -----11 ～ 150.5 ～ 10--0 ～ 153 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----13 ～ 180.5 ～ 10--0 ～ 153 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----17 ～ 250.5 ～ 10--0 ～ 205 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----22 ～ 300.5 ～ 10--0 ～ 205 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----3.5 ～ 60.5 ～ 10--0 ～ 62 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----4.5 ～ 70.5 ～ 10--0 ～ 82 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----5.5 ～ 80.5 ～ 10--0 ～ 102 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----6.5 ～ 100.5 ～ 10--0 ～ 102 ～ 1215 ～ 60

-

1 Piece(s) 4 Day(s) -----9 ～ 130.5 ～ 10--0 ～ 102 ～ 1515 ～ 60

-

1 Piece(s) 4 Day(s) -----11 ～ 150.5 ～ 10--0 ～ 153 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----13 ～ 180.5 ～ 10--0 ～ 153 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----17 ～ 250.5 ～ 10--0 ～ 205 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----22 ～ 300.5 ～ 10--0 ～ 205 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----3.5 ～ 60.5 ～ 10--0 ～ 62 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----4.5 ～ 70.5 ～ 10--0 ～ 82 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----5.5 ～ 80.5 ～ 10--0 ～ 102 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----6.5 ～ 100.5 ～ 10--0 ～ 102 ～ 1215 ～ 60

-

1 Piece(s) 4 Day(s) -----9 ～ 130.5 ～ 10--0 ～ 102 ～ 1515 ～ 60

-

1 Piece(s) 4 Day(s) -----11 ～ 150.5 ～ 10--0 ～ 153 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----13 ～ 180.5 ～ 10--0 ～ 153 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----17 ～ 250.5 ～ 10--0 ～ 205 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----22 ～ 300.5 ～ 10--0 ～ 205 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----3.5 ～ 60.5 ～ 10--0 ～ 62 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----4.5 ～ 70.5 ～ 10--0 ～ 82 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----5.5 ～ 80.5 ～ 10--0 ～ 102 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----6.5 ～ 100.5 ～ 10--0 ～ 102 ～ 1215 ～ 60

-

1 Piece(s) 4 Day(s) -----9 ～ 130.5 ～ 10--0 ～ 102 ～ 1515 ～ 60

-

1 Piece(s) 4 Day(s) -----11 ～ 150.5 ～ 10--0 ～ 153 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----13 ～ 180.5 ～ 10--0 ～ 153 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----17 ～ 250.5 ～ 10--0 ～ 205 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----22 ～ 300.5 ～ 10--0 ～ 205 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----3.5 ～ 60.5 ～ 10--0 ～ 62 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----4.5 ～ 70.5 ～ 10--0 ～ 82 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----5.5 ～ 80.5 ～ 10--0 ～ 102 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----6.5 ～ 100.5 ～ 15--0 ～ 102 ～ 1215 ～ 60

-

1 Piece(s) 4 Day(s) -----9 ～ 130.5 ～ 10--0 ～ 102 ～ 1515 ～ 60

-

1 Piece(s) 4 Day(s) -----11 ～ 150.5 ～ 10--0 ～ 153 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----13 ～ 180.5 ～ 10--0 ～ 153 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----17 ～ 250.5 ～ 10--0 ～ 205 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----22 ～ 300.5 ～ 10--0 ～ 205 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----3.5 ～ 60.5 ～ 10--0 ～ 62 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----4.5 ～ 70.5 ～ 10--0 ～ 82 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----5.5 ～ 80.5 ～ 10--0 ～ 102 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----6.5 ～ 100.5 ～ 10--0 ～ 102 ～ 1215 ～ 60

-

1 Piece(s) 4 Day(s) -----9 ～ 130.5 ～ 10--0 ～ 102 ～ 1515 ～ 60

-

1 Piece(s) 4 Day(s) -----11 ～ 150.5 ～ 10--0 ～ 153 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----13 ～ 180.5 ～ 10--0 ～ 153 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----17 ～ 250.5 ～ 10--0 ～ 205 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----22 ～ 300.5 ～ 10--0 ～ 205 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----3.5 ～ 60.5 ～ 10--0 ～ 62 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----4.5 ～ 70.5 ～ 10--0 ～ 82 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----5.5 ～ 80.5 ～ 10--0 ～ 102 ～ 1015 ～ 60

-

1 Piece(s) 4 Day(s) -----6.5 ～ 100.5 ～ 10--0 ～ 102 ～ 1215 ～ 60

-

1 Piece(s) 4 Day(s) -----9 ～ 130.5 ～ 10--0 ～ 102 ～ 1515 ～ 60

-

1 Piece(s) 4 Day(s) -----11 ～ 150.5 ～ 10--0 ～ 153 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----13 ～ 180.5 ～ 10--0 ～ 153 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----17 ～ 250.5 ～ 10--0 ～ 205 ～ 2015 ～ 60

-

1 Piece(s) 4 Day(s) -----22 ～ 300.5 ～ 10--0 ～ 205 ～ 2015 ～ 60

Loading...

  1. << Prev
  2. 10
  3. 11
  4. 12
  5. 13
  6. 14
  7. Next >>

Basic Information

Basic Shape Large Head Insertion Guide Tip Type Tapered Insertion Guide Specifications Not Provided
Mounting Side Shape Threaded

Configure

Clear All

2,610 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Insertion Guide Tip Shape

    • Round
    • Diamond

    Clear

  • Surface Treatment

    • Not Provided
    • Hard Chrome Plating
      • Hard Chrome Plating

    Clear

  • Heat Treatment

    • Not Provided
    • Dip Quenching

    Clear

  • Steel Type

    • SKS3
      • Equivalent to 9CrWMn (alloy tool steel or bearing steel)
      • Alloy tool steel or bearing steel

    Clear

  • Mounting Side Outer Dia. D(mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Clear

  • Locating Pin-Mounting Section P(mm)

     [3.5-30/0.01mm Unit(s)]

    Clear

  • Taper Length E(mm)

     [0.5-15/0.1mm Unit(s)]

    Clear

  • Positioning Side O.D. Tolerance

    • 0/-0.02
    • 0/-0.005
    • 0.005/0
    • g7
    • h7
    • m7
    • p7

    Clear

  • Mounting Side Tolerance

    • 0/-0.005
    • 0.005/0
    • g7
    • h7
    • m7
    • p7

    Clear

  • Installation Part Length L(mm)

     [0-20/1mm Unit(s)]

    Clear

  • Length of Positioning Portion B(mm)

     [2-30/0.1mm Unit(s)]

    Clear

  • A(°)

    • 15
    • 30
    • 45
    • 60

    Clear

  • type

    • E-BKFNAAA
    • E-BKFNAAB
    • E-BKFNAAG
    • E-BKFNAAH
    • E-BKFNAAM
    • E-BKFNAAP
    • E-BKFNAAS
    • E-BKFNABA
    • E-BKFNABB
    • E-BKFNABG
    • E-BKFNABH
    • E-BKFNABM
    • E-BKFNABP
    • E-BKFNABS
    • E-BKFNAGA
    • E-BKFNAGB
    • E-BKFNAGG
    • E-BKFNAGH
    • E-BKFNAGM
    • E-BKFNAGP
    • E-BKFNAGS
    • E-BKFNAHA
    • E-BKFNAHB
    • E-BKFNAHG
    • E-BKFNAHH
    • E-BKFNAHM
    • E-BKFNAHP
    • E-BKFNAHS
    • E-BKFNAMA
    • E-BKFNAMB
    • E-BKFNAMG
    • E-BKFNAMH
    • E-BKFNAMM
    • E-BKFNAMP
    • E-BKFNAMS
    • E-BKFNAPA
    • E-BKFNAPB
    • E-BKFNAPG
    • E-BKFNAPH
    • E-BKFNAPM
    • E-BKFNAPP
    • E-BKFNAPS
    • E-GKFNAGG
    • E-GKFNAGH
    • E-GKFNAGM
    • E-GKFNAGP
    • E-GKFNAGS
    • E-GKFNAHG
    • E-GKFNAHH
    • E-GKFNAHM
    • E-GKFNAHP
    • E-GKFNAHS
    • E-GKFNAMG
    • E-GKFNAMH
    • E-GKFNAMM
    • E-GKFNAMP
    • E-GKFNAMS
    • E-GKFNAPG
    • E-GKFNAPH
    • E-GKFNAPM
    • E-GKFNAPP
    • E-GKFNAPS
    • E-GKFNDGG
    • E-GKFNDGH
    • E-GKFNDGM
    • E-GKFNDGP
    • E-GKFNDGS
    • E-GKFNDHG
    • E-GKFNDHH
    • E-GKFNDHM
    • E-GKFNDHP
    • E-GKFNDHS
    • E-GKFNDMG
    • E-GKFNDMH
    • E-GKFNDMM
    • E-GKFNDMP
    • E-GKFNDMS
    • E-GKFNDPG
    • E-GKFNDPH
    • E-GKFNDPM
    • E-GKFNDPP
    • E-GKFNDPS
    • E-HKFNAGG
    • E-HKFNAGH
    • E-HKFNAGM
    • E-HKFNAGP
    • E-HKFNAGS
    • E-HKFNAHG
    • E-HKFNAHH
    • E-HKFNAHM
    • E-HKFNAHP
    • E-HKFNAHS
    • E-HKFNAMG
    • E-HKFNAMH
    • E-HKFNAMM
    • E-HKFNAMP
    • E-HKFNAMS
    • E-HKFNAPG
    • E-HKFNAPH
    • E-HKFNAPM
    • E-HKFNAPP
    • E-HKFNAPS
    • E-KFNAAA
    • E-KFNAAB
    • E-KFNAAG
    • E-KFNAAH
    • E-KFNAAM
    • E-KFNAAP
    • E-KFNAAS
    • E-KFNABA
    • E-KFNABB
    • E-KFNABG
    • E-KFNABH
    • E-KFNABM
    • E-KFNABP
    • E-KFNABS
    • E-KFNAGA
    • E-KFNAGB
    • E-KFNAGG
    • E-KFNAGH
    • E-KFNAGM
    • E-KFNAGP
    • E-KFNAGS
    • E-KFNAHA
    • E-KFNAHB
    • E-KFNAHG
    • E-KFNAHH
    • E-KFNAHM
    • E-KFNAHP
    • E-KFNAHS
    • E-KFNAMA
    • E-KFNAMB
    • E-KFNAMG
    • E-KFNAMH
    • E-KFNAMM
    • E-KFNAMP
    • E-KFNAMS
    • E-KFNAPA
    • E-KFNAPB
    • E-KFNAPG
    • E-KFNAPH
    • E-KFNAPM
    • E-KFNAPP
    • E-KFNAPS
    • E-KFNDAA
    • E-KFNDAB
    • E-KFNDAG
    • E-KFNDAH
    • E-KFNDAM
    • E-KFNDAP
    • E-KFNDAS
    • E-KFNDBA
    • E-KFNDBB
    • E-KFNDBG
    • E-KFNDBH
    • E-KFNDBM
    • E-KFNDBP
    • E-KFNDBS
    • E-KFNDGA
    • E-KFNDGB
    • E-KFNDGG
    • E-KFNDGH
    • E-KFNDGM
    • E-KFNDGP
    • E-KFNDGS
    • E-KFNDHA
    • E-KFNDHB
    • E-KFNDHG
    • E-KFNDHH
    • E-KFNDHM
    • E-KFNDHP
    • E-KFNDHS
    • E-KFNDMA
    • E-KFNDMB
    • E-KFNDMG
    • E-KFNDMH
    • E-KFNDMM
    • E-KFNDMP
    • E-KFNDMS
    • E-KFNDPA
    • E-KFNDPB
    • E-KFNDPG
    • E-KFNDPH
    • E-KFNDPM
    • E-KFNDPP
    • E-KFNDPS
    • E-SKFNAAA
    • E-SKFNAAB
    • E-SKFNAAG
    • E-SKFNAAH
    • E-SKFNAAM
    • E-SKFNAAP
    • E-SKFNAAS
    • E-SKFNABA
    • E-SKFNABB
    • E-SKFNABG
    • E-SKFNABH
    • E-SKFNABM
    • E-SKFNABP
    • E-SKFNABS
    • E-SKFNAGA
    • E-SKFNAGB
    • E-SKFNAGG
    • E-SKFNAGH
    • E-SKFNAGM
    • E-SKFNAGP
    • E-SKFNAGS
    • E-SKFNAHA
    • E-SKFNAHB
    • E-SKFNAHG
    • E-SKFNAHH
    • E-SKFNAHM
    • E-SKFNAHP
    • E-SKFNAHS
    • E-SKFNAMA
    • E-SKFNAMB
    • E-SKFNAMG
    • E-SKFNAMH
    • E-SKFNAMM
    • E-SKFNAMP
    • E-SKFNAMS
    • E-SKFNAPA
    • E-SKFNAPB
    • E-SKFNAPG
    • E-SKFNAPH
    • E-SKFNAPM
    • E-SKFNAPP
    • E-SKFNAPS
    • E-SKFNDAA
    • E-SKFNDAB
    • E-SKFNDAG
    • E-SKFNDAH
    • E-SKFNDAM
    • E-SKFNDAP
    • E-SKFNDAS
    • E-SKFNDBA
    • E-SKFNDBB
    • E-SKFNDBG
    • E-SKFNDBH
    • E-SKFNDBM
    • E-SKFNDBP
    • E-SKFNDBS
    • E-SKFNDGA
    • E-SKFNDGB
    • E-SKFNDGG
    • E-SKFNDGH
    • E-SKFNDGM
    • E-SKFNDGP
    • E-SKFNDGS
    • E-SKFNDHA
    • E-SKFNDHB
    • E-SKFNDHG
    • E-SKFNDHH
    • E-SKFNDHM
    • E-SKFNDHP
    • E-SKFNDHS
    • E-SKFNDMA
    • E-SKFNDMB
    • E-SKFNDMG
    • E-SKFNDMH
    • E-SKFNDMM
    • E-SKFNDMP
    • E-SKFNDMS
    • E-SKFNDPA
    • E-SKFNDPB
    • E-SKFNDPG
    • E-SKFNDPH
    • E-SKFNDPM
    • E-SKFNDPP
    • E-SKFNDPS

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 4 Day(s) or Less

    Clear

Specify Alterations

Additional Products in this Category

Tech Support

Technical Inquiry

Payment Method

more
  • Credit Card
    • VISA
    • MasterCard
  • Bank Transfer
    • FPX
    • Interbank GIRO (IBG)

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm,    9am – 1pm(Sat) * Order cut-off time is 12pm

  • Tel: (60) 3 7890 6399
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.