(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Locating Pins Shouldered, Configurable, Tip Shape Selectable (Part Numbers)
Part Number
Configured Part Number is shown.
Product Overview
The positioning pin is used for the spatial positioning in the directions of X and Y axes, mainly using the workpiece hole as the positioning benchmark or used in conjunction with bushings, in which the shouldered locating pins come with a standard tapered head and a shoulder, allowing for height adjustment of the object being positioned.
Dimensional Drawing
Specification Table
| Part Number | - | P | - | B | - | R | - | G | - | L | - | T | ||||||||
| Type | Fixed Part | Material | Front End | D | ||||||||||||||||
| E-LP E-LPD | U X | J J | B A | 8 10 | - - | P10.00 P11.98 | - - | B10.0 B5.0 | - | R10 | - | G8 | - - | L14 L10 | - - | T2.0 T5.0 | ||||
■Material Specification Table
| Type | Fixed Part Shape | Material Code |  Material |  Surface Treatment |  Hardness |
| E-LP(Round) E-LPD(Diamond) | M(Standard) U(Tapped) X(Threaded) | J | ①Equivalent to Alloy Tool Steel or Bearing Steel | - | Quenching hardness 55 to 60HRC |
| G | ②Equivalent to Alloy Tool Steel or Bearing Steel | Hard Chrome Plated | Quenching hardness 50HRC~ Plating hardness 750HV～ | ||
| Y | ③General structural steel or carbon steel | - | Quenching hardness 45～50HRC or above | ||
| B | ④General structural steel or carbon steel | Ferroferric Oxide Protective Film | Quenching hardness 45～50HRC or above | ||
| R | ⑤General structural steel or carbon steel | Hard Chrome Plated | Quenching hardness 55～60HRC Plating hardness 750HV～ | ||
| S | ⑥Austenitic stainless steel | - | - | ||
| D | ⑦Austenitic stainless steel | Hard Chrome Plated | Plating hardness 750HV～ | ||
| C | ⑧Martensitic stainless steel | - | Quenching hardness 50HRC~ |
If there are requirements on rust prevention, give priority to products made of austenitic stainless steel.■ Dimension Specification Table
| Part Number | P 0.01mm increments | B 0.1mm increments | R 1mm increments | G 1mm increments | L 1mm increments | T 0.5mm increments | ||||
| Type | Fixed Part Shape | Material Code | Tip Shape | D | ||||||
| Shape A, Shape C only | Shape B only | |||||||||
| E-LP(Round) E-LPD(Diamond) Applicable when D≥3 | M(Standard) U(Tapped) (D≥6) X(Threaded) (D≥3) | J G Y B R S D C | A B C | 2 | 2.50~4.00 | 2.0~25.0 | Shape A R≥P/2 Shape C R≤P/2 | Shape B G≤P | 2~6 | 1.0~10.0 |
| 3 | 3.50~6.00 | 2.0～25.0(10.0) | 3~6 | |||||||
| 4 | 3.50~7.00 | 2.0～25.0(10.0) | 4~8 | |||||||
| 5 | 4.00~8.00 | 2.0～30.0(10.0) | 5~10 | |||||||
| 6 | 5.00~10.00 | 2.0～40.0(12.0) | 6(10)～12 | |||||||
| 8 | 6.00~11.00 | 2.0～40.0(15.0) | 8(14)～16 | |||||||
| 10 | 8.00~13.00 | 3.0～50.0(20.0) | 10(14)～20 | |||||||
| 12 | 10.00~15.00 | 3.0～50.0(20.0) | 12(14)～24 | |||||||
| 16 | 13.00~18.00 | 5.0～50.0(20.0) | 16~32 | |||||||
| 20 | 16.00~22.00 | 5.0～50.0(20.0) | 20~40 | |||||||
B dimension and L dimension applicable to the diamond type are as shown in ( ).Note that products with a D dimension of 8 and M5 specification may be damaged if a torque of 4.6N∙m or more is applied.Please understand that E-LPXRA12/16 and E-LPXSA12/16 series products are not available.Product Features
Precautions
①Dimensional tolerance and fit parameter table For details, click 
Tolerance Fit Parameter Table
②Reference table for common dimensions without indicated tolerance (medium accuracy m) For details, clickList of Common Tolerances
③Reference value for thread mounting torque For details, clickThread Torque
Tolerance Fit Parameter Table②Reference table for common dimensions without indicated tolerance (medium accuracy m) For details, click
List of Common Tolerances③Reference value for thread mounting torque For details, click
Thread TorqueExample of Use
Example introduction: Clearance adjustment for height position of processed product
Function description:
A locating pin is mounted on the fixture body to position a processed product. In actual processing, it is necessary to keep a certain distance between the processed product and the fixture body, such as a through hole or an entirely through shape, in order to ensure effective processing distance. The shouldered locating pin not only ensures the positioning accuracy of the processed product, but also ensures a safe clearance distance.
Advantages of shouldered locating pin:
①Allows for adjustment in the height direction of the workpiece being positioned.
②The positioning accuracy is guaranteed while allowing for adjustment in the height direction.
Function description:
A locating pin is mounted on the fixture body to position a processed product. In actual processing, it is necessary to keep a certain distance between the processed product and the fixture body, such as a through hole or an entirely through shape, in order to ensure effective processing distance. The shouldered locating pin not only ensures the positioning accuracy of the processed product, but also ensures a safe clearance distance.
Advantages of shouldered locating pin:
①Allows for adjustment in the height direction of the workpiece being positioned.
②The positioning accuracy is guaranteed while allowing for adjustment in the height direction.
Application Industries
| Lithium battery | Semiconductor | Medical | ||
 |  |  | ||
| Smart Phones | Electronic & Electrical | Robotics | ||
 |  |  |
Related Products
| Bushings for Locating Pins Round Flanged | Bushings for Fixtures Configurable, Straight | Bushings for Fixtures Slotted Hole, Compact Flanged | ||
 |  |  | ||
| Representative model: JBY6-12 | Representative model: JBAF10-P4.00-L8.5 | Representative model: JBEH10-P6.00-W4.15-L10 | ||
| Advantages: can be fixed using bolts | Advantages: standard shape, easy to install | Advantages: absorbs clearance errors |
Related Documents
①Positioning technology reference information Click Positioning Technology
②Surface treatment related anti-rust ability salt spray test reference ClickSalt Spray Test for Anti-rust Ability of Metal Surface
Positioning Technology②Surface treatment related anti-rust ability salt spray test reference Click
Salt Spray Test for Anti-rust Ability of Metal SurfacePart Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-LPDMSC3-P[3.5-6/0.01]-B[2-10/0.1]-R[1-3/1]-L[3-6/1]-T[1-10/0.5] |
| E-LPDMSC4-P[3.5-7/0.01]-B[2-10/0.1]-R[1-3/1]-L[4-8/1]-T[1-10/0.5] |
| E-LPDMSC5-P[4-8/0.01]-B[2-10/0.1]-R[1-4/1]-L[5-10/1]-T[1-10/0.5] |
| E-LPDMSC6-P[5-10/0.01]-B[2-12/0.1]-R[1-5/1]-L[6-12/1]-T[1-10/0.5] |
| E-LPDMSC8-P[6-11/0.01]-B[2-15/0.1]-R[1-5/1]-L[14-16/1]-T[1-10/0.5] |
| E-LPDMSC10-P[8-13/0.01]-B[3-20/0.1]-R[1-6/1]-L[14-20/1]-T[1-10/0.5] |
| E-LPDMSC12-P[10-15/0.01]-B[3-20/0.1]-R[1-7/1]-L[14-24/1]-T[1-10/0.5] |
| E-LPDMSC16-P[13-18/0.01]-B[5-20/0.1]-R[1-9/1]-L[16-32/1]-T[1-10/0.5] |
| E-LPDMSC20-P[16-22/0.01]-B[5-20/0.1]-R[1-11/1]-L[20-40/1]-T[1-10/0.5] |
| E-LPDMYA3-P[3.5-6/0.01]-B[2-10/0.1]-R[2-500/1]-L[3-6/1]-T[1-10/0.5] |
| E-LPDMYA4-P[3.5-7/0.01]-B[2-10/0.1]-R[2-500/1]-L[4-8/1]-T[1-10/0.5] |
| E-LPDMYA5-P[4-8/0.01]-B[2-10/0.1]-R[2-500/1]-L[5-10/1]-T[1-10/0.5] |
| E-LPDMYA6-P[5-10/0.01]-B[2-12/0.1]-R[3-500/1]-L[6-12/1]-T[1-10/0.5] |
| E-LPDMYA8-P[6-11/0.01]-B[2-15/0.1]-R[3-500/1]-L[14-16/1]-T[1-10/0.5] |
| E-LPDMYA10-P[8-13/0.01]-B[3-20/0.1]-R[4-500/1]-L[14-20/1]-T[1-10/0.5] |
| E-LPDMYA12-P[10-15/0.01]-B[3-20/0.1]-R[5-500/1]-L[14-24/1]-T[1-10/0.5] |
| E-LPDMYA16-P[13-18/0.01]-B[5-20/0.1]-R[7-500/1]-L[16-32/1]-T[1-10/0.5] |
| E-LPDMYA20-P[16-22/0.01]-B[5-20/0.1]-R[8-500/1]-L[20-40/1]-T[1-10/0.5] |
| E-LPDMYB3-P[3.5-6/0.01]-B[2-10/0.1]-G[1-6/1]-L[3-6/1]-T[1-10/0.5] |
| E-LPDMYB4-P[3.5-7/0.01]-B[2-10/0.1]-G[1-7/1]-L[4-8/1]-T[1-10/0.5] |
| E-LPDMYB5-P[4-8/0.01]-B[2-10/0.1]-G[1-8/1]-L[5-10/1]-T[1-10/0.5] |
| E-LPDMYB6-P[5-10/0.01]-B[2-12/0.1]-G[1-10/1]-L[6-12/1]-T[1-10/0.5] |
| E-LPDMYB8-P[6-11/0.01]-B[2-15/0.1]-G[1-11/1]-L[14-16/1]-T[1-10/0.5] |
| E-LPDMYB10-P[8-13/0.01]-B[3-20/0.1]-G[1-13/1]-L[14-20/1]-T[1-10/0.5] |
| E-LPDMYB12-P[10-15/0.01]-B[3-20/0.1]-G[1-15/1]-L[14-24/1]-T[1-10/0.5] |
| E-LPDMYB16-P[13-18/0.01]-B[5-20/0.1]-G[1-18/1]-L[16-32/1]-T[1-10/0.5] |
| E-LPDMYB20-P[16-22/0.01]-B[5-20/0.1]-G[1-22/1]-L[20-40/1]-T[1-10/0.5] |
| E-LPDMYC3-P[3.5-6/0.01]-B[2-10/0.1]-R[1-3/1]-L[3-6/1]-T[1-10/0.5] |
| E-LPDMYC4-P[3.5-7/0.01]-B[2-10/0.1]-R[1-3/1]-L[4-8/1]-T[1-10/0.5] |
| E-LPDMYC5-P[4-8/0.01]-B[2-10/0.1]-R[1-4/1]-L[5-10/1]-T[1-10/0.5] |
| E-LPDMYC6-P[5-10/0.01]-B[2-12/0.1]-R[1-5/1]-L[6-12/1]-T[1-10/0.5] |
| E-LPDMYC8-P[6-11/0.01]-B[2-15/0.1]-R[1-5/1]-L[14-16/1]-T[1-10/0.5] |
| E-LPDMYC10-P[8-13/0.01]-B[3-20/0.1]-R[1-6/1]-L[14-20/1]-T[1-10/0.5] |
| E-LPDMYC12-P[10-15/0.01]-B[3-20/0.1]-R[1-7/1]-L[14-24/1]-T[1-10/0.5] |
| E-LPDMYC16-P[13-18/0.01]-B[5-20/0.1]-R[1-9/1]-L[16-32/1]-T[1-10/0.5] |
| E-LPDMYC20-P[16-22/0.01]-B[5-20/0.1]-R[1-11/1]-L[20-40/1]-T[1-10/0.5] |
| E-LPDUBA6-P[5-10/0.01]-B[2-12/0.1]-R[3-500/1]-L[6-12/1]-T[1-10/0.5] |
| E-LPDUBA8-P[6-11/0.01]-B[2-15/0.1]-R[3-500/1]-L[14-16/1]-T[1-10/0.5] |
| E-LPDUBA10-P[8-13/0.01]-B[3-20/0.1]-R[4-500/1]-L[14-20/1]-T[1-10/0.5] |
| E-LPDUBA12-P[10-15/0.01]-B[3-20/0.1]-R[5-500/1]-L[14-24/1]-T[1-10/0.5] |
| E-LPDUBA16-P[13-18/0.01]-B[5-20/0.1]-R[7-500/1]-L[16-32/1]-T[1-10/0.5] |
| E-LPDUBA20-P[16-22/0.01]-B[5-20/0.1]-R[8-500/1]-L[20-40/1]-T[1-10/0.5] |
| E-LPDUBB6-P[5-10/0.01]-B[2-12/0.1]-G[1-10/1]-L[6-12/1]-T[1-10/0.5] |
| E-LPDUBB8-P[6-11/0.01]-B[2-15/0.1]-G[1-11/1]-L[14-16/1]-T[1-10/0.5] |
| E-LPDUBB10-P[8-13/0.01]-B[3-20/0.1]-G[1-13/1]-L[14-20/1]-T[1-10/0.5] |
| E-LPDUBB12-P[10-15/0.01]-B[3-20/0.1]-G[1-15/1]-L[14-24/1]-T[1-10/0.5] |
| E-LPDUBB16-P[13-18/0.01]-B[5-20/0.1]-G[1-18/1]-L[16-32/1]-T[1-10/0.5] |
| E-LPDUBB20-P[16-22/0.01]-B[5-20/0.1]-G[1-22/1]-L[20-40/1]-T[1-10/0.5] |
| E-LPDUBC6-P[5-10/0.01]-B[2-12/0.1]-R[1-5/1]-L[6-12/1]-T[1-10/0.5] |
| E-LPDUBC8-P[6-11/0.01]-B[2-15/0.1]-R[1-5/1]-L[14-16/1]-T[1-10/0.5] |
| E-LPDUBC10-P[8-13/0.01]-B[3-20/0.1]-R[1-6/1]-L[14-20/1]-T[1-10/0.5] |
| E-LPDUBC12-P[10-15/0.01]-B[3-20/0.1]-R[1-7/1]-L[14-24/1]-T[1-10/0.5] |
| E-LPDUBC16-P[13-18/0.01]-B[5-20/0.1]-R[1-9/1]-L[16-32/1]-T[1-10/0.5] |
| E-LPDUBC20-P[16-22/0.01]-B[5-20/0.1]-R[1-11/1]-L[20-40/1]-T[1-10/0.5] |
| E-LPDUCA6-P[5-10/0.01]-B[2-12/0.1]-R[3-500/1]-L[6-12/1]-T[1-10/0.5] |
| E-LPDUCA8-P[6-11/0.01]-B[2-15/0.1]-R[3-500/1]-L[14-16/1]-T[1-10/0.5] |
| E-LPDUCA10-P[8-13/0.01]-B[3-20/0.1]-R[4-500/1]-L[14-20/1]-T[1-10/0.5] |
| E-LPDUCA12-P[10-15/0.01]-B[3-20/0.1]-R[5-500/1]-L[14-24/1]-T[1-10/0.5] |
| E-LPDUCA16-P[13-18/0.01]-B[5-20/0.1]-R[7-500/1]-L[16-32/1]-T[1-10/0.5] |
| E-LPDUCA20-P[16-22/0.01]-B[5-20/0.1]-R[8-500/1]-L[20-40/1]-T[1-10/0.5] |
| E-LPDUCB6-P[5-10/0.01]-B[2-12/0.1]-G[1-10/1]-L[6-12/1]-T[1-10/0.5] |
| E-LPDUCB8-P[6-11/0.01]-B[2-15/0.1]-G[1-11/1]-L[14-16/1]-T[1-10/0.5] |
| E-LPDUCB10-P[8-13/0.01]-B[3-20/0.1]-G[1-13/1]-L[14-20/1]-T[1-10/0.5] |
| E-LPDUCB12-P[10-15/0.01]-B[3-20/0.1]-G[1-15/1]-L[14-24/1]-T[1-10/0.5] |
| E-LPDUCB16-P[13-18/0.01]-B[5-20/0.1]-G[1-18/1]-L[16-32/1]-T[1-10/0.5] |
| E-LPDUCB20-P[16-22/0.01]-B[5-20/0.1]-G[1-22/1]-L[20-40/1]-T[1-10/0.5] |
| E-LPDUCC6-P[5-10/0.01]-B[2-12/0.1]-R[1-5/1]-L[6-12/1]-T[1-10/0.5] |
| E-LPDUCC8-P[6-11/0.01]-B[2-15/0.1]-R[1-5/1]-L[14-16/1]-T[1-10/0.5] |
| E-LPDUCC10-P[8-13/0.01]-B[3-20/0.1]-R[1-6/1]-L[14-20/1]-T[1-10/0.5] |
| E-LPDUCC12-P[10-15/0.01]-B[3-20/0.1]-R[1-7/1]-L[14-24/1]-T[1-10/0.5] |
| E-LPDUCC16-P[13-18/0.01]-B[5-20/0.1]-R[1-9/1]-L[16-32/1]-T[1-10/0.5] |
| E-LPDUCC20-P[16-22/0.01]-B[5-20/0.1]-R[1-11/1]-L[20-40/1]-T[1-10/0.5] |
| E-LPDUDA6-P[5-10/0.01]-B[2-12/0.1]-R[3-500/1]-L[6-12/1]-T[1-10/0.5] |
| E-LPDUDA8-P[6-11/0.01]-B[2-15/0.1]-R[3-500/1]-L[14-16/1]-T[1-10/0.5] |
| E-LPDUDA10-P[8-13/0.01]-B[3-20/0.1]-R[4-500/1]-L[14-20/1]-T[1-10/0.5] |
| E-LPDUDA12-P[10-15/0.01]-B[3-20/0.1]-R[5-500/1]-L[14-24/1]-T[1-10/0.5] |
| E-LPDUDA16-P[13-18/0.01]-B[5-20/0.1]-R[7-500/1]-L[16-32/1]-T[1-10/0.5] |
| E-LPDUDA20-P[16-22/0.01]-B[5-20/0.1]-R[8-500/1]-L[20-40/1]-T[1-10/0.5] |
| E-LPDUDB6-P[5-10/0.01]-B[2-12/0.1]-G[1-10/1]-L[6-12/1]-T[1-10/0.5] |
| E-LPDUDB8-P[6-11/0.01]-B[2-15/0.1]-G[1-11/1]-L[14-16/1]-T[1-10/0.5] |
| E-LPDUDB10-P[8-13/0.01]-B[3-20/0.1]-G[1-13/1]-L[14-20/1]-T[1-10/0.5] |
| E-LPDUDB12-P[10-15/0.01]-B[3-20/0.1]-G[1-15/1]-L[14-24/1]-T[1-10/0.5] |
| E-LPDUDB16-P[13-18/0.01]-B[5-20/0.1]-G[1-18/1]-L[16-32/1]-T[1-10/0.5] |
| E-LPDUDB20-P[16-22/0.01]-B[5-20/0.1]-G[1-22/1]-L[20-40/1]-T[1-10/0.5] |
| E-LPDUDC6-P[5-10/0.01]-B[2-12/0.1]-R[1-5/1]-L[6-12/1]-T[1-10/0.5] |
| E-LPDUDC8-P[6-11/0.01]-B[2-15/0.1]-R[1-5/1]-L[14-16/1]-T[1-10/0.5] |
| E-LPDUDC10-P[8-13/0.01]-B[3-20/0.1]-R[1-6/1]-L[14-20/1]-T[1-10/0.5] |
| E-LPDUDC12-P[10-15/0.01]-B[3-20/0.1]-R[1-7/1]-L[14-24/1]-T[1-10/0.5] |
| E-LPDUDC16-P[13-18/0.01]-B[5-20/0.1]-R[1-9/1]-L[16-32/1]-T[1-10/0.5] |
| E-LPDUDC20-P[16-22/0.01]-B[5-20/0.1]-R[1-11/1]-L[20-40/1]-T[1-10/0.5] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Insertion Guide Tip Shape | Insertion Guide Tip Type | Mounting Side Shape | Surface Treatment | Heat Treatment | Steel Type | Stainless Steel Type | Locating Side Outer Dia. P (Ø) (mm) | Mounting Side Outer Dia. D (mm) | Mounting Side Tolerance | Mounting Part Length L (mm) | Positioning Part Length B (mm) | G (mm) | R (mm) | T (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 3.5 ～ 6 | 3 | m7 | 3 ～ 6 | 2 ～ 10 | - | 1 ～ 3 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 3.5 ～ 7 | 4 | m7 | 4 ～ 8 | 2 ～ 10 | - | 1 ～ 3 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 4 ～ 8 | 5 | m7 | 5 ～ 10 | 2 ～ 10 | - | 1 ～ 4 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 5 ～ 10 | 6 | m7 | 6 ～ 12 | 2 ～ 12 | - | 1 ～ 5 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 6 ～ 11 | 8 | m7 | 14 ～ 16 | 2 ～ 15 | - | 1 ～ 5 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 8 ～ 13 | 10 | m7 | 14 ～ 20 | 3 ～ 20 | - | 1 ～ 6 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 10 ～ 15 | 12 | m7 | 14 ～ 24 | 3 ～ 20 | - | 1 ～ 7 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 13 ～ 18 | 16 | m7 | 16 ～ 32 | 5 ～ 20 | - | 1 ～ 9 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 16 ～ 22 | 20 | m7 | 20 ～ 40 | 5 ～ 20 | - | 1 ～ 11 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 3.5 ～ 6 | 3 | m7 | 3 ～ 6 | 2 ～ 10 | - | 2 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 3.5 ～ 7 | 4 | m7 | 4 ～ 8 | 2 ～ 10 | - | 2 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 4 ～ 8 | 5 | m7 | 5 ～ 10 | 2 ～ 10 | - | 2 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 5 ～ 10 | 6 | m7 | 6 ～ 12 | 2 ～ 12 | - | 3 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 6 ～ 11 | 8 | m7 | 14 ～ 16 | 2 ～ 15 | - | 3 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 8 ～ 13 | 10 | m7 | 14 ～ 20 | 3 ～ 20 | - | 4 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 10 ～ 15 | 12 | m7 | 14 ～ 24 | 3 ～ 20 | - | 5 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 13 ～ 18 | 16 | m7 | 16 ～ 32 | 5 ～ 20 | - | 7 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 16 ～ 22 | 20 | m7 | 20 ～ 40 | 5 ～ 20 | - | 8 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 3.5 ～ 6 | 3 | m7 | 3 ～ 6 | 2 ～ 10 | 1 ～ 6 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 3.5 ～ 7 | 4 | m7 | 4 ～ 8 | 2 ～ 10 | 1 ～ 7 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 4 ～ 8 | 5 | m7 | 5 ～ 10 | 2 ～ 10 | 1 ～ 8 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 5 ～ 10 | 6 | m7 | 6 ～ 12 | 2 ～ 12 | 1 ～ 10 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 6 ～ 11 | 8 | m7 | 14 ～ 16 | 2 ～ 15 | 1 ～ 11 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 8 ～ 13 | 10 | m7 | 14 ～ 20 | 3 ～ 20 | 1 ～ 13 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 10 ～ 15 | 12 | m7 | 14 ～ 24 | 3 ～ 20 | 1 ～ 15 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 13 ～ 18 | 16 | m7 | 16 ～ 32 | 5 ～ 20 | 1 ～ 18 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 16 ～ 22 | 20 | m7 | 20 ～ 40 | 5 ～ 20 | 1 ～ 22 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 3.5 ～ 6 | 3 | m7 | 3 ～ 6 | 2 ～ 10 | - | 1 ～ 3 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 3.5 ～ 7 | 4 | m7 | 4 ～ 8 | 2 ～ 10 | - | 1 ～ 3 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 4 ～ 8 | 5 | m7 | 5 ～ 10 | 2 ～ 10 | - | 1 ～ 4 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 5 ～ 10 | 6 | m7 | 6 ～ 12 | 2 ～ 12 | - | 1 ～ 5 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 6 ～ 11 | 8 | m7 | 14 ～ 16 | 2 ～ 15 | - | 1 ～ 5 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 8 ～ 13 | 10 | m7 | 14 ～ 20 | 3 ～ 20 | - | 1 ～ 6 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 10 ～ 15 | 12 | m7 | 14 ～ 24 | 3 ～ 20 | - | 1 ～ 7 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 13 ～ 18 | 16 | m7 | 16 ～ 32 | 5 ～ 20 | - | 1 ～ 9 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Straight (Press-Fit) | Not Provided | Dip Quenching | [S45C] S45C Equivalent | - | 16 ～ 22 | 20 | m7 | 20 ～ 40 | 5 ～ 20 | - | 1 ～ 11 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Tapped | Black Oxide | Dip Quenching | [S45C] S45C Equivalent | - | 5 ～ 10 | 6 | g7 | 6 ～ 12 | 2 ～ 12 | - | 3 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Tapped | Black Oxide | Dip Quenching | [S45C] S45C Equivalent | - | 6 ～ 11 | 8 | g7 | 14 ～ 16 | 2 ～ 15 | - | 3 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Tapped | Black Oxide | Dip Quenching | [S45C] S45C Equivalent | - | 8 ～ 13 | 10 | g7 | 14 ～ 20 | 3 ～ 20 | - | 4 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Tapped | Black Oxide | Dip Quenching | [S45C] S45C Equivalent | - | 10 ～ 15 | 12 | g7 | 14 ～ 24 | 3 ～ 20 | - | 5 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Tapped | Black Oxide | Dip Quenching | [S45C] S45C Equivalent | - | 13 ～ 18 | 16 | g7 | 16 ～ 32 | 5 ～ 20 | - | 7 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Tapped | Black Oxide | Dip Quenching | [S45C] S45C Equivalent | - | 16 ～ 22 | 20 | g7 | 20 ～ 40 | 5 ～ 20 | - | 8 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Tapped | Black Oxide | Dip Quenching | [S45C] S45C Equivalent | - | 5 ～ 10 | 6 | g7 | 6 ～ 12 | 2 ～ 12 | 1 ～ 10 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Tapped | Black Oxide | Dip Quenching | [S45C] S45C Equivalent | - | 6 ～ 11 | 8 | g7 | 14 ～ 16 | 2 ～ 15 | 1 ～ 11 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Tapped | Black Oxide | Dip Quenching | [S45C] S45C Equivalent | - | 8 ～ 13 | 10 | g7 | 14 ～ 20 | 3 ～ 20 | 1 ～ 13 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Tapped | Black Oxide | Dip Quenching | [S45C] S45C Equivalent | - | 10 ～ 15 | 12 | g7 | 14 ～ 24 | 3 ～ 20 | 1 ～ 15 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Tapped | Black Oxide | Dip Quenching | [S45C] S45C Equivalent | - | 13 ～ 18 | 16 | g7 | 16 ～ 32 | 5 ～ 20 | 1 ～ 18 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Tapped | Black Oxide | Dip Quenching | [S45C] S45C Equivalent | - | 16 ～ 22 | 20 | g7 | 20 ～ 40 | 5 ～ 20 | 1 ～ 22 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Tapped | Black Oxide | Dip Quenching | [S45C] S45C Equivalent | - | 5 ～ 10 | 6 | g7 | 6 ～ 12 | 2 ～ 12 | - | 1 ～ 5 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Tapped | Black Oxide | Dip Quenching | [S45C] S45C Equivalent | - | 6 ～ 11 | 8 | g7 | 14 ～ 16 | 2 ～ 15 | - | 1 ～ 5 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Tapped | Black Oxide | Dip Quenching | [S45C] S45C Equivalent | - | 8 ～ 13 | 10 | g7 | 14 ～ 20 | 3 ～ 20 | - | 1 ～ 6 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Tapped | Black Oxide | Dip Quenching | [S45C] S45C Equivalent | - | 10 ～ 15 | 12 | g7 | 14 ～ 24 | 3 ～ 20 | - | 1 ～ 7 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Tapped | Black Oxide | Dip Quenching | [S45C] S45C Equivalent | - | 13 ～ 18 | 16 | g7 | 16 ～ 32 | 5 ～ 20 | - | 1 ～ 9 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Tapped | Black Oxide | Dip Quenching | [S45C] S45C Equivalent | - | 16 ～ 22 | 20 | g7 | 20 ～ 40 | 5 ～ 20 | - | 1 ～ 11 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Tapped | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 5 ～ 10 | 6 | g7 | 6 ～ 12 | 2 ～ 12 | - | 3 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Tapped | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 6 ～ 11 | 8 | g7 | 14 ～ 16 | 2 ～ 15 | - | 3 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Tapped | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 8 ～ 13 | 10 | g7 | 14 ～ 20 | 3 ～ 20 | - | 4 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Tapped | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 10 ～ 15 | 12 | g7 | 14 ～ 24 | 3 ～ 20 | - | 5 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Tapped | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 13 ～ 18 | 16 | g7 | 16 ～ 32 | 5 ～ 20 | - | 7 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Tapped | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 16 ～ 22 | 20 | g7 | 20 ～ 40 | 5 ～ 20 | - | 8 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Tapped | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 5 ～ 10 | 6 | g7 | 6 ～ 12 | 2 ～ 12 | 1 ～ 10 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Tapped | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 6 ～ 11 | 8 | g7 | 14 ～ 16 | 2 ～ 15 | 1 ～ 11 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Tapped | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 8 ～ 13 | 10 | g7 | 14 ～ 20 | 3 ～ 20 | 1 ～ 13 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Tapped | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 10 ～ 15 | 12 | g7 | 14 ～ 24 | 3 ～ 20 | 1 ～ 15 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Tapped | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 13 ～ 18 | 16 | g7 | 16 ～ 32 | 5 ～ 20 | 1 ～ 18 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Tapped | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 16 ～ 22 | 20 | g7 | 20 ～ 40 | 5 ～ 20 | 1 ～ 22 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Tapped | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 5 ～ 10 | 6 | g7 | 6 ～ 12 | 2 ～ 12 | - | 1 ～ 5 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Tapped | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 6 ～ 11 | 8 | g7 | 14 ～ 16 | 2 ～ 15 | - | 1 ～ 5 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Tapped | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 8 ～ 13 | 10 | g7 | 14 ～ 20 | 3 ～ 20 | - | 1 ～ 6 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Tapped | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 10 ～ 15 | 12 | g7 | 14 ～ 24 | 3 ～ 20 | - | 1 ～ 7 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Tapped | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 13 ～ 18 | 16 | g7 | 16 ～ 32 | 5 ～ 20 | - | 1 ～ 9 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Tapped | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 16 ～ 22 | 20 | g7 | 20 ～ 40 | 5 ～ 20 | - | 1 ～ 11 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Tapped | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 5 ～ 10 | 6 | g7 | 6 ～ 12 | 2 ～ 12 | - | 3 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Tapped | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 6 ～ 11 | 8 | g7 | 14 ～ 16 | 2 ～ 15 | - | 3 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Tapped | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 8 ～ 13 | 10 | g7 | 14 ～ 20 | 3 ～ 20 | - | 4 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Tapped | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 10 ～ 15 | 12 | g7 | 14 ～ 24 | 3 ～ 20 | - | 5 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Tapped | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 13 ～ 18 | 16 | g7 | 16 ～ 32 | 5 ～ 20 | - | 7 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | R | Tapped | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 16 ～ 22 | 20 | g7 | 20 ～ 40 | 5 ～ 20 | - | 8 ～ 500 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Tapped | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 5 ～ 10 | 6 | g7 | 6 ～ 12 | 2 ～ 12 | 1 ～ 10 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Tapped | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 6 ～ 11 | 8 | g7 | 14 ～ 16 | 2 ～ 15 | 1 ～ 11 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Tapped | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 8 ～ 13 | 10 | g7 | 14 ～ 20 | 3 ～ 20 | 1 ～ 13 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Tapped | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 10 ～ 15 | 12 | g7 | 14 ～ 24 | 3 ～ 20 | 1 ～ 15 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Tapped | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 13 ～ 18 | 16 | g7 | 16 ～ 32 | 5 ～ 20 | 1 ～ 18 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Tapered | Tapped | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 16 ～ 22 | 20 | g7 | 20 ～ 40 | 5 ～ 20 | 1 ～ 22 | - | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Tapped | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 5 ～ 10 | 6 | g7 | 6 ～ 12 | 2 ～ 12 | - | 1 ～ 5 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Tapped | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 6 ～ 11 | 8 | g7 | 14 ～ 16 | 2 ～ 15 | - | 1 ～ 5 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Tapped | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 8 ～ 13 | 10 | g7 | 14 ～ 20 | 3 ～ 20 | - | 1 ～ 6 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Tapped | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 10 ～ 15 | 12 | g7 | 14 ～ 24 | 3 ～ 20 | - | 1 ～ 7 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Tapped | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 13 ～ 18 | 16 | g7 | 16 ～ 32 | 5 ～ 20 | - | 1 ～ 9 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Diamond | Taper R | Tapped | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 16 ～ 22 | 20 | g7 | 20 ～ 40 | 5 ～ 20 | - | 1 ～ 11 | 1 ～ 10 |
Loading...
Basic Information
| Basic Shape | Shouldered | Insertion Guide Specifications | Not Provided | Locating Side O.D. Tolerance | 0/-0.02 |
|---|
Specification/Dimensions
-
Insertion Guide Tip Shape
-
Round -
Diamond
-
-
Insertion Guide Tip Type
-
Tapered -
Taper R -
R
-
-
Mounting Side Shape
-
Straight (Press-Fit) -
Tapped -
Threaded
-
-
Surface Treatment
- Not Provided
- Black Oxide
- Hard Chrome Plating
-
Heat Treatment
- Not Provided
- Dip Quenching
-
Steel Type
- SKS3
- S45C
- SKS3
-
Stainless Steel Type
- SUS440C
- SUS440C
-
Locating Side Outer Dia. P (Ø)(mm)
-
Mounting Side Outer Dia. D(mm)
-
Mounting Side Tolerance
-
Mounting Part Length L(mm)
-
Positioning Part Length B(mm)
-
G(mm)
-
R(mm)
-
T(mm)
-
type
- E-LPDMBA
- E-LPDMBB
- E-LPDMBC
- E-LPDMCA
- E-LPDMCB
- E-LPDMCC
- E-LPDMDA
- E-LPDMDB
- E-LPDMDC
- E-LPDMGA
- E-LPDMGB
- E-LPDMGC
- E-LPDMJA
- E-LPDMJB
- E-LPDMJC
- E-LPDMRA
- E-LPDMRB
- E-LPDMRC
- E-LPDMSA
- E-LPDMSB
- E-LPDMSC
- E-LPDMYA
- E-LPDMYB
- E-LPDMYC
- E-LPDUBA
- E-LPDUBB
- E-LPDUBC
- E-LPDUCA
- E-LPDUCB
- E-LPDUCC
- E-LPDUDA
- E-LPDUDB
- E-LPDUDC
- E-LPDUGA
- E-LPDUGB
- E-LPDUGC
- E-LPDUJA
- E-LPDUJB
- E-LPDUJC
- E-LPDURA
- E-LPDURB
- E-LPDURC
- E-LPDUSA
- E-LPDUSB
- E-LPDUSC
- E-LPDUYA
- E-LPDUYB
- E-LPDUYC
- E-LPDXBA
- E-LPDXBB
- E-LPDXBC
- E-LPDXCA
- E-LPDXCB
- E-LPDXCC
- E-LPDXDA
- E-LPDXDB
- E-LPDXDC
- E-LPDXGA
- E-LPDXGB
- E-LPDXGC
- E-LPDXJA
- E-LPDXJB
- E-LPDXJC
- E-LPDXRA
- E-LPDXRB
- E-LPDXRC
- E-LPDXSA
- E-LPDXSB
- E-LPDXSC
- E-LPDXYA
- E-LPDXYB
- E-LPDXYC
- E-LPMBA
- E-LPMBB
- E-LPMBC
- E-LPMCA
- E-LPMCB
- E-LPMCC
- E-LPMDA
- E-LPMDB
- E-LPMDC
- E-LPMGA
- E-LPMGB
- E-LPMGC
- E-LPMJA
- E-LPMJB
- E-LPMJC
- E-LPMRA
- E-LPMRB
- E-LPMRC
- E-LPMSA
- E-LPMSB
- E-LPMSC
- E-LPMYA
- E-LPMYB
- E-LPMYC
- E-LPUBA
- E-LPUBB
- E-LPUBC
- E-LPUCA
- E-LPUCB
- E-LPUCC
- E-LPUDA
- E-LPUDB
- E-LPUDC
- E-LPUGA
- E-LPUGB
- E-LPUGC
- E-LPUJA
- E-LPUJB
- E-LPUJC
- E-LPURA
- E-LPURB
- E-LPURC
- E-LPUSA
- E-LPUSB
- E-LPUSC
- E-LPUYA
- E-LPUYB
- E-LPUYC
- E-LPXBA
- E-LPXBB
- E-LPXBC
- E-LPXCA
- E-LPXCB
- E-LPXCC
- E-LPXDA
- E-LPXDB
- E-LPXDC
- E-LPXGA
- E-LPXGB
- E-LPXGC
- E-LPXJA
- E-LPXJB
- E-LPXJC
- E-LPXRA
- E-LPXRB
- E-LPXRC
- E-LPXSA
- E-LPXSB
- E-LPXSC
- E-LPXYA
- E-LPXYB
- E-LPXYC
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 4 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Locating Pins - Large Head, Tapered (Threaded)
- Locating Pins - Sphere Large Head (Press Fit)
- Feed Pins - Shouldered - Press Fit
- Locating Pins - High Hardness Stainless Steel, Large Flat Head (Tapped)
- Locating Pins - Small Head, Round Tapered - Press Fit
- Locating Pins - Plastic, Large Head - Tapped
- Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Threaded)
- Locating Pins-High Hardness Stainless Steel/Small Flat Head/Press Fit
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy