(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Locating Pins Shouldered, Tapered, Configurable (Part Numbers)
Part Number
Configured Part Number is shown.
Product Overview
The positioning pin is used for the spatial positioning in the directions of X and Y axes, mainly using the workpiece hole as the positioning benchmark or used in conjunction with bushings, in which the shouldered locating pins come with a standard tapered head and a shoulder, allowing for height adjustment of the object being positioned.
Dimensional Drawing
Specification Table
| Part Number | - | P | - | L | - | B | - | T | ||||
| Type | Shape | D | ||||||||||
| E-FPJ | AT | 10 | - | P8.03 | - | L10 | - | B4.0 | - | T5 | ||
■Material Specification Table
| Material No. |  Material |  Surface Treatment |  Hardness | Type | Shape Code | ||
| Standard | Tapped | Threaded Type | |||||
| ① | Equivalent to Alloy Tool Steel or Bearing Steel | - | Quenching hardness 55HRC~ | E-FPJ | E-FPU | E-FPN | AT(Round) DT(Diamond) |
| ② | Equivalent to Alloy Tool Steel or Bearing Steel | Hard Chrome Plated | Quenching hardness 50HRC~ Plating hardness 750HV～ | E-GFPJ | E-GFPU | E-GFPN | |
| ③ | Austenitic stainless steel | - | - | E-SFPJ | E-SFPU | E-SFPN | |
| ④ | Austenitic stainless steel | Hard Chrome Plated | Plating hardness 750HV～ | E-HFPJ | E-HFPU | E-HFPN | |
| ⑤ | Martensitic stainless steel | - | Quenching hardness 50HRC~ | E-CFPJ | E-CFPU | E-CFPN | |
Some combinations are not available. Please refer to the price list before selection.Martensitic stainless steel products have an identification groove on D part.The tightening torque (reference value) is the strength class (8.8) in the technical data, and the tightening state lasts for more than 24 hours. Not applicable when using locking agents or spring washers.If there are requirements on rust prevention, give priority to products made of austenitic stainless steel.Please understand that E-HFPJ series products are temporarily not available in the diamond shape and E-HFPU series products are temporarily not available in the round shape.■Dimension Specification Table
■Standard Type
| Part Number | P 0.01mm increments | L 1mm increments | B 0.1mm increments | T 0.5mm increments | H | C | m | (W) | |||
| Type | Shape | D | D Dimension Tolerance m7 | ||||||||
| E-FPJ E-GFPJ E-SFPJ E-HFPJ E-CFPJ | AT (Round) DT (Diamond) | 2 | +0.012 +0.002 | 1.00~2.00 | 2~4 | 2.0~10.0 | 1.0~10.0 | 7 | 0.5 | 0.5 | - |
| 3 | 2.00~4.00 | 3~6 | 2.0~10.0 | 8 | 1 | 1.0 | |||||
| 4 | +0.016 +0.004 | 2.00~5.00 | 4~8 | 2.0~10.0 | 9 | 1 | 1.2 | ||||
| 5 | 3.00~6.00 | 5~10 | 2.0~10.0 | 10 | 2 | 1.5 | |||||
| 6 | 4.00~7.00 | 6~12 | 2.0~12.0 | 11 | 1.8 | ||||||
| 8 | +0.021 +0.006 | 5.00~9.00 | 8~16 | 2.0~15.0 | 13 | 1.5 | 3 | 2.2 | |||
| 10 | 7.00~11.00 | 10~20 | 3.0~20.0 | 15 | 2 | 3 | |||||
| 12 | +0.025 +0.007 | 7.00~12.00 | 12~24 | 3.0~20.0 | 17 | 3.2 | |||||
| 13 | 8.00~13.00 | 13~26 | 5.0~20.0 | 18 | 4 | 3.5 | |||||
| 16 | 13.00~16.00 | 16~32 | 5.0~20.0 | 21 | 3 | 4 | |||||
| 20 | +0.029 +0.008 | 16.00~20.00 | 20~40 | 5.0~20.0 | 25 | 5 | 5.5 | ||||
Please understand that E-HFPJ series products are temporarily not available in the diamond shape.■Tapped Type
| Part Number | P 0.01mm increments | L 1mm increments | B 0.1mm increments | T 0.5mm increments | H | m | (W) | M Coarse Thread | ℓ | |||
| Type | Shape | D | D Dimension Tolerance g7 | |||||||||
| E-FPU E-GFPU E-SFPU E-HFPU E-CFPU | AT (Round) DT (Diamond) | 5 | -0.004 -0.016 | 3.00~6.00 | 7~10 | 2.0~10.0 | 1.0~10.0 | 10 | 2 | 1.5 | M2 | 3 |
| 6 | 4.00~7.00 | 6(9)～12 | 11 | 1.8 | M3 | 5 | ||||||
| 8 | -0.005 -0.020 | 5.00~9.00 | 8(12)～16 | 2.0~12.0 | 13 | 3 | 2.2 | M5 | 8 | |||
| 10 | 7.00~11.00 | 10(12)～20 | 2.0~15.0 | 15 | 3 | |||||||
| 12 | -0.006 -0.024 | 7.00~12.00 | 12~24 | 3.0~20.0 | 17 | 3.2 | ||||||
| 13 | 8.00~13.00 | 13(14)～26 | 3.0~20.0 | 18 | 4 | 3.5 | M8 | 10 | ||||
| 16 | 13.00~16.00 | 16~32 | 5.0~20.0 | 21 | 4 | 12 | ||||||
| 20 | -0.007 -0.028 | 16.00~20.00 | 20~40 | 5.0~20.0 | 25 | 5 | 5.5 | |||||
Please understand that E-HFPU series products are temporarily not available in the round shape.■Threaded Type
| Part Number | P 0.01mm increments | L 1mm increments | B 0.1mm increments | T 0.5mm increments | H | m | (W) | |||
| Type | Shape | D | D Dimension Tolerance g7 | |||||||
| E-FPN E-GFPN E-SFPN E-HFPN E-CFPN | AT (Round) DT (Diamond) | 3 | -0.002 -0.012 | 2.00~4.00 | 2~6 | 2.0~10.0 | 1.0~10.0 | 8 | 1 | 1.0 |
| 4 | -0.004 -0.016 | 2.00~5.00 | 2~8 | 2.0~10.0 | 9 | 1.2 | ||||
| 5 | 3.00~6.00 | 3~10 | 2.0~10.0 | 10 | 2 | 1.5 | ||||
| 6 | 4.00~7.00 | 3~10 | 2.0~12.0 | 11 | 1.8 | |||||
| 8 | -0.005 -0.020 | 5.00~9.00 | 5~10 | 2.0~15.0 | 13 | 3 | 2.2 | |||
| 10 | 7.00~11.00 | 5~15 | 3.0~20.0 | 15 | 3 | |||||
| 12 | -0.006 -0.024 | 7.00~12.00 | 8~15 | 3.0~20.0 | 17 | 3.2 | ||||
| 16 | 13.00~16.00 | 8~20 | 5.0~20.0 | 21 | 4 | 4 | ||||
| 20 | -0.007 -0.028 | 16.00~20.00 | 10~20 | 5.0~20.0 | 25 | 5 | 5.5 | |||
Product Features
Precautions
①Dimensional tolerance and fit parameter table For details, click 
Tolerance Fit Parameter Table
②Reference table for common dimensions without indicated tolerance (medium accuracy m) For details, clickList of Common Tolerances
③Reference value for thread mounting torque For details, clickThread Torque
Tolerance Fit Parameter Table②Reference table for common dimensions without indicated tolerance (medium accuracy m) For details, click
List of Common Tolerances③Reference value for thread mounting torque For details, click
Thread TorqueExample of Use
Example introduction: Clearance adjustment for height position of processed product
Function description:
A locating pin is mounted on the fixture body to position a processed product. In actual processing, it is necessary to keep a certain distance between the processed product and the fixture body, such as a through hole or an entirely through shape, in order to ensure effective processing distance. The shouldered locating pin not only ensures the positioning accuracy of the processed product, but also ensures a safe clearance distance.
Advantages of shouldered locating pin:
①Allows for adjustment in the height direction of the workpiece being positioned.
②The positioning accuracy is guaranteed while allowing for adjustment in the height direction.
Function description:
A locating pin is mounted on the fixture body to position a processed product. In actual processing, it is necessary to keep a certain distance between the processed product and the fixture body, such as a through hole or an entirely through shape, in order to ensure effective processing distance. The shouldered locating pin not only ensures the positioning accuracy of the processed product, but also ensures a safe clearance distance.
Advantages of shouldered locating pin:
①Allows for adjustment in the height direction of the workpiece being positioned.
②The positioning accuracy is guaranteed while allowing for adjustment in the height direction.
Application Industries
| Lithium battery | Semiconductor | Medical | ||
 |  |  | ||
| Smart Phones | Electronic & Electrical | Robotics | ||
 |  |  |
Related Products
| Bushings for Locating Pins Round Flanged | Bushings for Fixtures Configurable, Straight | Bushings for Fixtures Slotted Hole, Compact Flanged | ||
 |  |  | ||
| Representative model: JBY6-12 | Representative model: JBAF10-P4.00-L8.5 | Representative model: JBEH10-P6.00-W4.15-L10 | ||
| Advantages: can be fixed using bolts | Advantages: standard shape, easy to install | Advantages: absorbs clearance errors |
Related Documents
①Positioning technology reference information Click Positioning Technology
②Surface treatment related anti-rust ability salt spray test reference ClickSalt Spray Test for Anti-rust Ability of Metal Surface
Positioning Technology②Surface treatment related anti-rust ability salt spray test reference Click
Salt Spray Test for Anti-rust Ability of Metal SurfacePart Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-CFPJAT2-P[1-2/0.01]-L[2-4/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-CFPJAT3-P[2-4/0.01]-L[3-6/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-CFPJAT4-P[2-5/0.01]-L[4-8/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-CFPJAT5-P[3-6/0.01]-L[5-10/1]-B[2-15/0.1]-T[1-10/0.5] |
| E-CFPJAT6-P[4-7/0.01]-L[5-12/1]-B[2-15/0.1]-T[1-10/0.5] |
| E-CFPJAT8-P[5-9/0.01]-L[5-16/1]-B[2-20/0.1]-T[1-10/0.5] |
| E-CFPJAT10-P[7-11/0.01]-L[8-20/1]-B[3-30/0.1]-T[1-10/0.5] |
| E-CFPJAT12-P[7-12/0.01]-L[10-24/1]-B[3-30/0.1]-T[1-10/0.5] |
| E-CFPJAT13-P[8-13/0.01]-L[13-26/1]-B[5-30/0.1]-T[1-10/0.5] |
| E-CFPJAT16-P[13-16/0.01]-L[16-32/1]-B[5-30/0.1]-T[1-10/0.5] |
| E-CFPJAT20-P[16-20/0.01]-L[20-40/1]-B[5-30/0.1]-T[1-10/0.5] |
| E-CFPJDT3-P[2-4/0.01]-L[3-6/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-CFPJDT4-P[2-5/0.01]-L[4-8/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-CFPJDT5-P[3-6/0.01]-L[5-10/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-CFPJDT6-P[4-7/0.01]-L[5-12/1]-B[2-15/0.1]-T[1-10/0.5] |
| E-CFPJDT8-P[5-9/0.01]-L[5-16/1]-B[2-15/0.1]-T[1-10/0.5] |
| E-CFPJDT10-P[7-11/0.01]-L[10-20/1]-B[3-25/0.1]-T[1-10/0.5] |
| E-CFPJDT12-P[7-12/0.01]-L[10-24/1]-B[3-25/0.1]-T[1-10/0.5] |
| E-CFPJDT13-P[8-13/0.01]-L[13-26/1]-B[5-25/0.1]-T[1-10/0.5] |
| E-CFPJDT16-P[13-16/0.01]-L[16-32/1]-B[5-30/0.1]-T[1-10/0.5] |
| E-CFPJDT20-P[16-20/0.01]-L[20-40/1]-B[5-30/0.1]-T[1-10/0.5] |
| E-FPJAT2-P[1-2/0.01]-L[2-4/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-FPJAT3-P[2-4/0.01]-L[3-6/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-FPJAT4-P[2-5/0.01]-L[4-8/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-FPJAT5-P[3-6/0.01]-L[5-10/1]-B[2-15/0.1]-T[1-10/0.5] |
| E-FPJAT6-P[4-7/0.01]-L[5-12/1]-B[2-15/0.1]-T[1-10/0.5] |
| E-FPJAT8-P[5-9/0.01]-L[5-16/1]-B[2-20/0.1]-T[1-10/0.5] |
| E-FPJAT10-P[7-11/0.01]-L[8-20/1]-B[3-30/0.1]-T[1-10/0.5] |
| E-FPJAT12-P[7-12/0.01]-L[10-24/1]-B[3-30/0.1]-T[1-10/0.5] |
| E-FPJAT13-P[8-13/0.01]-L[13-26/1]-B[5-30/0.1]-T[1-10/0.5] |
| E-FPJAT16-P[13-16/0.01]-L[16-32/1]-B[5-30/0.1]-T[1-10/0.5] |
| E-FPJAT20-P[16-20/0.01]-L[20-40/1]-B[5-30/0.1]-T[1-10/0.5] |
| E-FPJDT3-P[2-4/0.01]-L[3-6/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-FPJDT4-P[2-5/0.01]-L[4-8/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-FPJDT5-P[3-6/0.01]-L[5-10/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-FPJDT6-P[4-7/0.01]-L[5-12/1]-B[2-15/0.1]-T[1-10/0.5] |
| E-FPJDT8-P[5-9/0.01]-L[5-16/1]-B[2-15/0.1]-T[1-10/0.5] |
| E-FPJDT10-P[7-11/0.01]-L[10-20/1]-B[3-25/0.1]-T[1-10/0.5] |
| E-FPJDT12-P[7-12/0.01]-L[10-24/1]-B[3-25/0.1]-T[1-10/0.5] |
| E-FPJDT13-P[8-13/0.01]-L[13-26/1]-B[5-25/0.1]-T[1-10/0.5] |
| E-FPJDT16-P[13-16/0.01]-L[16-32/1]-B[5-30/0.1]-T[1-10/0.5] |
| E-FPJDT20-P[16-20/0.01]-L[20-40/1]-B[5-30/0.1]-T[1-10/0.5] |
| E-GFPJAT3-P[2-4/0.01]-L[3-6/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-GFPJAT4-P[2-5/0.01]-L[4-8/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-GFPJAT5-P[3-6/0.01]-L[5-10/1]-B[2-15/0.1]-T[1-10/0.5] |
| E-GFPJAT6-P[4-7/0.01]-L[5-12/1]-B[2-15/0.1]-T[1-10/0.5] |
| E-GFPJAT8-P[5-9/0.01]-L[5-16/1]-B[2-20/0.1]-T[1-10/0.5] |
| E-GFPJAT10-P[7-11/0.01]-L[8-20/1]-B[3-30/0.1]-T[1-10/0.5] |
| E-GFPJAT12-P[7-12/0.01]-L[10-24/1]-B[3-30/0.1]-T[1-10/0.5] |
| E-GFPJAT13-P[8-13/0.01]-L[13-26/1]-B[5-30/0.1]-T[1-10/0.5] |
| E-GFPJAT16-P[13-16/0.01]-L[16-32/1]-B[5-30/0.1]-T[1-10/0.5] |
| E-GFPJAT20-P[16-20/0.01]-L[20-40/1]-B[5-30/0.1]-T[1-10/0.5] |
| E-GFPJDT3-P[2-4/0.01]-L[3-6/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-GFPJDT4-P[2-5/0.01]-L[4-8/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-GFPJDT5-P[3-6/0.01]-L[5-10/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-GFPJDT6-P[4-7/0.01]-L[5-12/1]-B[2-15/0.1]-T[1-10/0.5] |
| E-GFPJDT8-P[5-9/0.01]-L[5-16/1]-B[2-15/0.1]-T[1-10/0.5] |
| E-GFPJDT10-P[7-11/0.01]-L[10-20/1]-B[3-25/0.1]-T[1-10/0.5] |
| E-GFPJDT12-P[7-12/0.01]-L[10-24/1]-B[3-25/0.1]-T[1-10/0.5] |
| E-GFPJDT13-P[8-13/0.01]-L[13-26/1]-B[5-25/0.1]-T[1-10/0.5] |
| E-GFPJDT16-P[13-16/0.01]-L[16-32/1]-B[5-30/0.1]-T[1-10/0.5] |
| E-GFPJDT20-P[16-20/0.01]-L[20-40/1]-B[5-30/0.1]-T[1-10/0.5] |
| E-HFPJAT3-P[2-4/0.01]-L[3-6/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-HFPJAT4-P[2-5/0.01]-L[4-8/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-HFPJAT5-P[3-6/0.01]-L[5-10/1]-B[2-15/0.1]-T[1-10/0.5] |
| E-HFPJAT6-P[4-7/0.01]-L[5-12/1]-B[2-15/0.1]-T[1-10/0.5] |
| E-HFPJAT8-P[5-9/0.01]-L[5-16/1]-B[2-20/0.1]-T[1-10/0.5] |
| E-HFPJAT10-P[7-11/0.01]-L[8-20/1]-B[3-30/0.1]-T[1-10/0.5] |
| E-HFPJAT12-P[7-12/0.01]-L[10-24/1]-B[3-30/0.1]-T[1-10/0.5] |
| E-HFPJAT13-P[8-13/0.01]-L[13-26/1]-B[5-30/0.1]-T[1-10/0.5] |
| E-HFPJAT16-P[13-16/0.01]-L[16-32/1]-B[5-30/0.1]-T[1-10/0.5] |
| E-HFPJAT20-P[16-20/0.01]-L[20-40/1]-B[5-30/0.1]-T[1-10/0.5] |
| E-SFPJAT2-P[1-2/0.01]-L[2-4/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-SFPJAT3-P[2-4/0.01]-L[3-6/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-SFPJAT4-P[2-5/0.01]-L[4-8/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-SFPJAT5-P[3-6/0.01]-L[5-10/1]-B[2-15/0.1]-T[1-10/0.5] |
| E-SFPJAT6-P[4-7/0.01]-L[5-12/1]-B[2-15/0.1]-T[1-10/0.5] |
| E-SFPJAT8-P[5-9/0.01]-L[5-16/1]-B[2-20/0.1]-T[1-10/0.5] |
| E-SFPJAT10-P[7-11/0.01]-L[8-20/1]-B[3-30/0.1]-T[1-10/0.5] |
| E-SFPJAT12-P[7-12/0.01]-L[10-24/1]-B[3-30/0.1]-T[1-10/0.5] |
| E-SFPJAT13-P[8-13/0.01]-L[13-26/1]-B[5-30/0.1]-T[1-10/0.5] |
| E-SFPJAT16-P[13-16/0.01]-L[16-32/1]-B[5-30/0.1]-T[1-10/0.5] |
| E-SFPJAT20-P[16-20/0.01]-L[20-40/1]-B[5-30/0.1]-T[1-10/0.5] |
| E-SFPJDT3-P[2-4/0.01]-L[3-6/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-SFPJDT4-P[2-5/0.01]-L[4-8/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-SFPJDT5-P[3-6/0.01]-L[5-10/1]-B[2-10/0.1]-T[1-10/0.5] |
| E-SFPJDT6-P[4-7/0.01]-L[5-12/1]-B[2-15/0.1]-T[1-10/0.5] |
| E-SFPJDT8-P[5-9/0.01]-L[5-16/1]-B[2-15/0.1]-T[1-10/0.5] |
| E-SFPJDT10-P[7-11/0.01]-L[10-20/1]-B[3-25/0.1]-T[1-10/0.5] |
| E-SFPJDT12-P[7-12/0.01]-L[10-24/1]-B[3-25/0.1]-T[1-10/0.5] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Basic Shape | Insertion Guide Tip Shape | Mounting Side Shape | Surface Treatment | Heat Treatment | Steel Type | Stainless Steel Type | Locating Side Outer Dia. P (Ø) (mm) | Mounting Side Outer Dia. D (mm) | Mounting Side Tolerance | Mounting Part Length L (mm) | Positioning Part Length B (mm) | T (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 1 ～ 2 | 2 | m7 | 2 ～ 4 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 2 ～ 4 | 3 | m7 | 3 ～ 6 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 2 ～ 5 | 4 | m7 | 4 ～ 8 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 3 ～ 6 | 5 | m7 | 5 ～ 10 | 2 ～ 15 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 4 ～ 7 | 6 | m7 | 5 ～ 12 | 2 ～ 15 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 5 ～ 9 | 8 | m7 | 5 ～ 16 | 2 ～ 20 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 7 ～ 11 | 10 | m7 | 8 ～ 20 | 3 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 7 ～ 12 | 12 | m7 | 10 ～ 24 | 3 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 8 ～ 13 | 13 | m7 | 13 ～ 26 | 5 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 13 ～ 16 | 16 | m7 | 16 ～ 32 | 5 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 16 ～ 20 | 20 | m7 | 20 ～ 40 | 5 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 2 ～ 4 | 3 | m7 | 3 ～ 6 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 2 ～ 5 | 4 | m7 | 4 ～ 8 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 3 ～ 6 | 5 | m7 | 5 ～ 10 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 4 ～ 7 | 6 | m7 | 5 ～ 12 | 2 ～ 15 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 5 ～ 9 | 8 | m7 | 5 ～ 16 | 2 ～ 15 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 7 ～ 11 | 10 | m7 | 10 ～ 20 | 3 ～ 25 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 7 ～ 12 | 12 | m7 | 10 ～ 24 | 3 ～ 25 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 8 ～ 13 | 13 | m7 | 13 ～ 26 | 5 ～ 25 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 13 ～ 16 | 16 | m7 | 16 ～ 32 | 5 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Dip Quenching | - | [SUS440C] Martensitic Stainless Steel | 16 ～ 20 | 20 | m7 | 20 ～ 40 | 5 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 1 ～ 2 | 2 | m7 | 2 ～ 4 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 2 ～ 4 | 3 | m7 | 3 ～ 6 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 2 ～ 5 | 4 | m7 | 4 ～ 8 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 3 ～ 6 | 5 | m7 | 5 ～ 10 | 2 ～ 15 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 4 ～ 7 | 6 | m7 | 5 ～ 12 | 2 ～ 15 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 5 ～ 9 | 8 | m7 | 5 ～ 16 | 2 ～ 20 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 7 ～ 11 | 10 | m7 | 8 ～ 20 | 3 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 7 ～ 12 | 12 | m7 | 10 ～ 24 | 3 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 8 ～ 13 | 13 | m7 | 13 ～ 26 | 5 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 13 ～ 16 | 16 | m7 | 16 ～ 32 | 5 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 16 ～ 20 | 20 | m7 | 20 ～ 40 | 5 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 2 ～ 4 | 3 | m7 | 3 ～ 6 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 2 ～ 5 | 4 | m7 | 4 ～ 8 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 3 ～ 6 | 5 | m7 | 5 ～ 10 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 4 ～ 7 | 6 | m7 | 5 ～ 12 | 2 ～ 15 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 5 ～ 9 | 8 | m7 | 5 ～ 16 | 2 ～ 15 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 7 ～ 11 | 10 | m7 | 10 ～ 20 | 3 ～ 25 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 7 ～ 12 | 12 | m7 | 10 ～ 24 | 3 ～ 25 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 8 ～ 13 | 13 | m7 | 13 ～ 26 | 5 ～ 25 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 13 ～ 16 | 16 | m7 | 16 ～ 32 | 5 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 16 ～ 20 | 20 | m7 | 20 ～ 40 | 5 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 2 ～ 4 | 3 | m7 | 3 ～ 6 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 2 ～ 5 | 4 | m7 | 4 ～ 8 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 3 ～ 6 | 5 | m7 | 5 ～ 10 | 2 ～ 15 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 4 ～ 7 | 6 | m7 | 5 ～ 12 | 2 ～ 15 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 5 ～ 9 | 8 | m7 | 5 ～ 16 | 2 ～ 20 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 7 ～ 11 | 10 | m7 | 8 ～ 20 | 3 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 7 ～ 12 | 12 | m7 | 10 ～ 24 | 3 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 8 ～ 13 | 13 | m7 | 13 ～ 26 | 5 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 13 ～ 16 | 16 | m7 | 16 ～ 32 | 5 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 16 ～ 20 | 20 | m7 | 20 ～ 40 | 5 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 2 ～ 4 | 3 | m7 | 3 ～ 6 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 2 ～ 5 | 4 | m7 | 4 ～ 8 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 3 ～ 6 | 5 | m7 | 5 ～ 10 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 4 ～ 7 | 6 | m7 | 5 ～ 12 | 2 ～ 15 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 5 ～ 9 | 8 | m7 | 5 ～ 16 | 2 ～ 15 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 7 ～ 11 | 10 | m7 | 10 ～ 20 | 3 ～ 25 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 7 ～ 12 | 12 | m7 | 10 ～ 24 | 3 ～ 25 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 8 ～ 13 | 13 | m7 | 13 ～ 26 | 5 ～ 25 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 13 ～ 16 | 16 | m7 | 16 ～ 32 | 5 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [SKS3] Equivalent to alloy tool steel or bearing steel | - | 16 ～ 20 | 20 | m7 | 20 ～ 40 | 5 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 2 ～ 4 | 3 | m7 | 3 ～ 6 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 2 ～ 5 | 4 | m7 | 4 ～ 8 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 3 ～ 6 | 5 | m7 | 5 ～ 10 | 2 ～ 15 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 4 ～ 7 | 6 | m7 | 5 ～ 12 | 2 ～ 15 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 5 ～ 9 | 8 | m7 | 5 ～ 16 | 2 ～ 20 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 7 ～ 11 | 10 | m7 | 8 ～ 20 | 3 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 7 ～ 12 | 12 | m7 | 10 ～ 24 | 3 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 8 ～ 13 | 13 | m7 | 13 ～ 26 | 5 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 13 ～ 16 | 16 | m7 | 16 ～ 32 | 5 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | - | - | 16 ～ 20 | 20 | m7 | 20 ～ 40 | 5 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 1 ～ 2 | 2 | m7 | 2 ～ 4 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 2 ～ 4 | 3 | m7 | 3 ～ 6 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 2 ～ 5 | 4 | m7 | 4 ～ 8 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 3 ～ 6 | 5 | m7 | 5 ～ 10 | 2 ～ 15 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 4 ～ 7 | 6 | m7 | 5 ～ 12 | 2 ～ 15 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 5 ～ 9 | 8 | m7 | 5 ～ 16 | 2 ～ 20 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 7 ～ 11 | 10 | m7 | 8 ～ 20 | 3 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 7 ～ 12 | 12 | m7 | 10 ～ 24 | 3 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 8 ～ 13 | 13 | m7 | 13 ～ 26 | 5 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 13 ～ 16 | 16 | m7 | 16 ～ 32 | 5 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Round | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 16 ～ 20 | 20 | m7 | 20 ～ 40 | 5 ～ 30 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 2 ～ 4 | 3 | m7 | 3 ～ 6 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 2 ～ 5 | 4 | m7 | 4 ～ 8 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 3 ～ 6 | 5 | m7 | 5 ～ 10 | 2 ～ 10 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 4 ～ 7 | 6 | m7 | 5 ～ 12 | 2 ～ 15 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 5 ～ 9 | 8 | m7 | 5 ～ 16 | 2 ～ 15 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 7 ～ 11 | 10 | m7 | 10 ～ 20 | 3 ～ 25 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Shouldered | Diamond | Straight (Press-Fit) | Not Provided | Not Provided | - | - | 7 ～ 12 | 12 | m7 | 10 ～ 24 | 3 ～ 25 | 1 ～ 10 |
Loading...
Basic Information
| Insertion Guide Tip Type | Tapered | Insertion Guide Specifications | Not Provided | Locating Side O.D. Tolerance | 0/-0.02 |
|---|---|---|---|---|---|
| Dimension Configurable Type | P·L·B dimension configurable | Application | Standard Shape | Shouldered | With Shoulder |
Specification/Dimensions
-
Basic Shape
-
Large Head -
Small Head -
Shouldered
-
-
Insertion Guide Tip Shape
-
Round -
Diamond
-
-
Surface Treatment
- Not Provided
- Hard Chrome Plating
-
Heat Treatment
- Not Provided
- Dip Quenching
-
Steel Type
- SKS3
- SKS3
-
Stainless Steel Type
- SUS440C
- SUS440C
-
Locating Side Outer Dia. P (Ø)(mm)
-
Mounting Side Outer Dia. D(mm)
-
Mounting Side Tolerance
-
Mounting Part Length L(mm)
-
Positioning Part Length B(mm)
-
T(mm)
-
type
- E-CFPJAT
- E-CFPJDT
- E-CFPNAT
- E-CFPNDT
- E-CFPUAT
- E-CFPUDT
- E-FPJAT
- E-FPJDT
- E-FPNAT
- E-FPNDT
- E-FPUAT
- E-FPUDT
- E-GFPJAT
- E-GFPJDT
- E-GFPNAT
- E-GFPNDT
- E-GFPUAT
- E-GFPUDT
- E-HFPJAT
- E-HFPNAT
- E-HFPNDT
- E-HFPUDT
- E-SFPJAT
- E-SFPJDT
- E-SFPNAT
- E-SFPNDT
- E-SFPUAT
- E-SFPUDT
-
Mounting Side Shape
-
Straight (Press-Fit) -
Tapped -
Threaded
-
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 4 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Locating Pins - Plastic, Small Head
- Small Diameter Locating Pin - Small Head / Press Fit
- Height Adjusting Pins - Press Fit
- Locating Pins - Large/Small Head, Tapered (Set Screw-Notch Shape)
- Locating Pin High Hardness Stainless Steel Straight Tip Shape Selection -Press Fit-
- Locating Pins Screw Mounted
- Locating Pins Large Head, Round Tapered, Configurable - Tolerance, Taper R Selectable, Tapped
- Locate Supporter (M12, M16) BJ400
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy