(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Locating Pin Small Head, Flat End, DP Tolerance Selectable, Press-Fit Type (Part Numbers)
Part Number
Configured Part Number is shown.
Product Overview
The positioning pin is used for the spatial positioning in the directions of X and Y axes, mainly using the workpiece hole as the positioning benchmark or used in conjunction with bushings, in which the small head flat type with DP tolerance selection offers flexible selection and can meet most customer design requirements.
Dimensional Drawing
.jpg)
The D section of martensitic stainless steel or equivalent high-hardness corrosion-resistant steel is equipped with an identification groove.Austenitic stainless steel may be ground or have no center hole.■ Material Specification Table
The D section of martensitic stainless steel has an identification groove.
Austenitic stainless steel may be ground or have no center hole.
Because it has a center hole, when the P dimension is small, the spherical part is almost invisible.
If there are requirements for rust prevention, give priority to products with hard chrome plating or made of austenitic stainless steel.
Precision grade tolerance cannot be selected for hard chrome plated products.
| Material No. |  Material |  Surface Treatment |  Hardness | Type | |
| Standard | |||||
| ① | SKS3 Equivalent | - | Quenching hardness 60 to 63HRC | E-KFFSA | |
| ② | SKS3 Equivalent | Hard Chrome Plated | Quenching hardness 50–55HRC Coating hardness 750HV– | E-GKFFSA | |
| ③ | SKS3 Equivalent | - | - | E-BKFFSA | |
| ④ | SUS304 Equivalent | - | - | E-SKFFSA | |
| ⑤ | SUS304 Equivalent | Hard Chrome Plated | Coating hardness 750HV or more | E-HKFFSA | |
| ⑥ | SUS440C Equivalent | - | Quenching hardness 50 to 55HRC | E-CKFFSA | |
The D section of martensitic stainless steel has an identification groove.Austenitic stainless steel may be ground or have no center hole.Because it has a center hole, when the P dimension is small, the spherical part is almost invisible.If there are requirements for rust prevention, give priority to products with hard chrome plating or made of austenitic stainless steel.Specifications Overview
■ Tolerance Selection
| D or P | Normal | Precision | |||||
| M | P | G | H | S | A | B | |
| m7 | p7 | g7 | h7 | - | - | - | |
| 1.50 ~ 3.00 | +0.012 +0.002 | +0.018 +0.009 | -0.003 -0.012 | 0 -0.010 | 0 -0.02 | +0.005 0 | 0 -0.005 |
| 3.01 ~ 6.00 | +0.016 +0.004 | +0.024 +0.012 | -0.004 -0.016 | 0 -0.012 | |||
| 6.01 ~ 10.00 | +0.021 +0.006 | +0.030 +0.015 | -0.005 -0.020 | 0 -0.015 | |||
| 10.01 ~ 18.00 | +0.025 +0.007 | +0.036 +0.018 | -0.006 -0.024 | 0 -0.018 | |||
| 18.01 ~ 30.00 | +0.029 +0.008 | +0.043 +0.022 | -0.007 -0.028 | 0 -0.021 | |||
Precision grade tolerance cannot be selected for hard chrome plated products.Specification Table
■ Dimension Specification Table · Standard Type
| Part Number |  PCan be specified down to 0.01 mm increments |  Lcan be specified down to 1 mm increments |  BCan be specified down to 0.1 mm increments | C | |||
 Type |  D toleranceSelection |  P ToleranceSelect |  D | ||||
| E-KFFSA E-GKFFSA* E-BKFFSA E-SKFFSA E-HKFFSA* E-CKFFSA | M P G H *A *B | S M P G H * A * B | 2 | 1.50 to 2.00 | 2 to 4 | 2.0 to 10.0 | 0.1 |
| 3 | 1.50 to 3.00 | 3 to 6 | 2.0 to 10.0 | ||||
| 4 | 2.00 to 4.00 | 4 to 8 | 2.0 to 10.0 | 0.5 | |||
| 5 | 2.00 to 5.00 | 5 to 10 | 2.0 to 10.0 | ||||
| 6 | 2.00 to 6.00 | 6 to 12 | 4.0 to 12.0 | ||||
| 8 | 3.00 to 8.00 | 8 to 16 | 6.0 to 15.0 | 1 | |||
| 10 | 3.00 to 10.00 | 10 to 20 | 6.0 to 20.0 | ||||
| 12 | 5.00 to 12.00 | 12 to 24 | 6.0 to 20.0 | 1.5 | |||
| 13 | 6.00 to 13.00 | 13 to 26 | 6.0 to 20.0 | 2 | |||
| 16 | 10.00 to 16.00 | 16 to 32 | 7.0 to 20.0 | 3 | |||
| 20 | 13.00 to 20.00 | 20 to 40 | 7.0 to 20.0 | ||||
Hard chrome plated products are not applicable to tolerances marked with an asterisk (*) (precision grade).Product Features
Precautions
(1) Dimensional Tolerance and Fit Parameter Table For details, click 
Dimensional Tolerance and Fit Table
(2) Reference Table for Unspecified Tolerance General Dimensions (Medium Precision m) For details, clickReference Table for Unspecified Tolerance Dimensions
(3) Reference Values for Thread Installation Torque For details, clickThread Torque Reference Values
Dimensional Tolerance and Fit Table(2) Reference Table for Unspecified Tolerance General Dimensions (Medium Precision m) For details, click
Reference Table for Unspecified Tolerance Dimensions(3) Reference Values for Thread Installation Torque For details, click
Thread Torque Reference ValuesExample of Use
Application Industries
| Lithium battery | Semiconductor | Medical | ||
 |  |  | ||
| Smart phone | Electronic & Electrical Appliances | Robotics | ||
 |  |  |
Related Products
| Fixture Bushing, Freely Specified Thin-Walled Type, Straight Type | Fixture Bushing, Shoulder Type, Customizable, Thin Wall Type | Bushing for positioning pin Slotted hole type Shouldered type | ||
 |  |  | ||
| Representative Model: JBAUF10-P7.31-L8.5 | Representative Model: JBHUFM25-P15.61-L20.0 | Typical Model: JBPE10-P6.8-W4.82-L15 | ||
| Advantages: Widely used in standard shapes | Advantage: Suitable for situations where height adjustment is difficult | Advantages: absorbs clearance errors |
Related Documents
(1) Positioning technical reference information Click Positioning information reference
(2) Surface treatment related rust prevention capability salt spray test reference ClickMetal surface rust prevention treatment reference
Positioning information reference(2) Surface treatment related rust prevention capability salt spray test reference Click
Metal surface rust prevention treatment referencePart Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-BKFFSAPP20-P[13-20/0.01]-L[20-40/1]-B[7-30/0.1] |
| E-BKFFSAPS2-P[1.5-2/0.01]-L[2-5/1]-B[2-10/0.1] |
| E-BKFFSAPS3-P[1.5-3/0.01]-L[3-10/1]-B[2-10/0.1] |
| E-BKFFSAPS4-P[1.5-4/0.01]-L[4-10/1]-B[2-10/0.1] |
| E-BKFFSAPS5-P[2-5/0.01]-L[5-10/1]-B[2-15/0.1] |
| E-BKFFSAPS6-P[2-6/0.01]-L[6-17/1]-B[4-15/0.1] |
| E-BKFFSAPS8-P[3-8/0.01]-L[8-21/1]-B[6-20/0.1] |
| E-BKFFSAPS10-P[3-10/0.01]-L[10-23/1]-B[6-20/0.1] |
| E-BKFFSAPS12-P[5-12/0.01]-L[12-24/1]-B[6-30/0.1] |
| E-BKFFSAPS13-P[6-13/0.01]-L[13-26/1]-B[6-30/0.1] |
| E-BKFFSAPS16-P[10-16/0.01]-L[16-32/1]-B[7-30/0.1] |
| E-BKFFSAPS20-P[13-20/0.01]-L[20-40/1]-B[7-30/0.1] |
| E-CKFFSAAA2-P[1.5-2/0.01]-L[2-5/1]-B[2-10/0.1] |
| E-CKFFSAAA3-P[1.5-3/0.01]-L[3-10/1]-B[2-10/0.1] |
| E-CKFFSAAA4-P[1.5-4/0.01]-L[4-10/1]-B[2-10/0.1] |
| E-CKFFSAAA5-P[2-5/0.01]-L[5-10/1]-B[2-15/0.1] |
| E-CKFFSAAA6-P[2-6/0.01]-L[6-17/1]-B[4-15/0.1] |
| E-CKFFSAAA8-P[3-8/0.01]-L[8-21/1]-B[6-20/0.1] |
| E-CKFFSAAA10-P[3-10/0.01]-L[10-23/1]-B[6-20/0.1] |
| E-CKFFSAAA12-P[5-12/0.01]-L[12-24/1]-B[6-30/0.1] |
| E-CKFFSAAA13-P[6-13/0.01]-L[13-26/1]-B[6-30/0.1] |
| E-CKFFSAAA16-P[10-16/0.01]-L[16-32/1]-B[7-30/0.1] |
| E-CKFFSAAA20-P[13-20/0.01]-L[20-40/1]-B[7-30/0.1] |
| E-CKFFSAAB2-P[1.5-2/0.01]-L[2-5/1]-B[2-10/0.1] |
| E-CKFFSAAB3-P[1.5-3/0.01]-L[3-10/1]-B[2-10/0.1] |
| E-CKFFSAAB4-P[1.5-4/0.01]-L[4-10/1]-B[2-10/0.1] |
| E-CKFFSAAB5-P[2-5/0.01]-L[5-10/1]-B[2-15/0.1] |
| E-CKFFSAAB6-P[2-6/0.01]-L[6-17/1]-B[4-15/0.1] |
| E-CKFFSAAB8-P[3-8/0.01]-L[8-21/1]-B[6-20/0.1] |
| E-CKFFSAAB10-P[3-10/0.01]-L[10-23/1]-B[6-20/0.1] |
| E-CKFFSAAB12-P[5-12/0.01]-L[12-24/1]-B[6-30/0.1] |
| E-CKFFSAAB13-P[6-13/0.01]-L[13-26/1]-B[6-30/0.1] |
| E-CKFFSAAB16-P[10-16/0.01]-L[16-32/1]-B[7-30/0.1] |
| E-CKFFSAAB20-P[13-20/0.01]-L[20-40/1]-B[7-30/0.1] |
| E-CKFFSAAG2-P[1.5-2/0.01]-L[2-5/1]-B[2-10/0.1] |
| E-CKFFSAAG3-P[1.5-3/0.01]-L[3-10/1]-B[2-10/0.1] |
| E-CKFFSAAG4-P[1.5-4/0.01]-L[4-10/1]-B[2-10/0.1] |
| E-CKFFSAAG5-P[2-5/0.01]-L[5-10/1]-B[2-15/0.1] |
| E-CKFFSAAG6-P[2-6/0.01]-L[6-17/1]-B[4-15/0.1] |
| E-CKFFSAAG8-P[3-8/0.01]-L[8-21/1]-B[6-20/0.1] |
| E-CKFFSAAG10-P[3-10/0.01]-L[10-23/1]-B[6-20/0.1] |
| E-CKFFSAAG12-P[5-12/0.01]-L[12-24/1]-B[6-30/0.1] |
| E-CKFFSAAG13-P[6-13/0.01]-L[13-26/1]-B[6-30/0.1] |
| E-CKFFSAAG16-P[10-16/0.01]-L[16-32/1]-B[7-30/0.1] |
| E-CKFFSAAG20-P[13-20/0.01]-L[20-40/1]-B[7-30/0.1] |
| E-CKFFSAAH2-P[1.5-2/0.01]-L[2-5/1]-B[2-10/0.1] |
| E-CKFFSAAH3-P[1.5-3/0.01]-L[3-10/1]-B[2-10/0.1] |
| E-CKFFSAAH4-P[1.5-4/0.01]-L[4-10/1]-B[2-10/0.1] |
| E-CKFFSAAH5-P[2-5/0.01]-L[5-10/1]-B[2-15/0.1] |
| E-CKFFSAAH6-P[2-6/0.01]-L[6-17/1]-B[4-15/0.1] |
| E-CKFFSAAH8-P[3-8/0.01]-L[8-21/1]-B[6-20/0.1] |
| E-CKFFSAAH10-P[3-10/0.01]-L[10-23/1]-B[6-20/0.1] |
| E-CKFFSAAH12-P[5-12/0.01]-L[12-24/1]-B[6-30/0.1] |
| E-CKFFSAAH13-P[6-13/0.01]-L[13-26/1]-B[6-30/0.1] |
| E-CKFFSAAH16-P[10-16/0.01]-L[16-32/1]-B[7-30/0.1] |
| E-CKFFSAAH20-P[13-20/0.01]-L[20-40/1]-B[7-30/0.1] |
| E-CKFFSAAM2-P[1.5-2/0.01]-L[2-5/1]-B[2-10/0.1] |
| E-CKFFSAAM3-P[1.5-3/0.01]-L[3-10/1]-B[2-10/0.1] |
| E-CKFFSAAM4-P[1.5-4/0.01]-L[4-10/1]-B[2-10/0.1] |
| E-CKFFSAAM5-P[2-5/0.01]-L[5-10/1]-B[2-15/0.1] |
| E-CKFFSAAM6-P[2-6/0.01]-L[6-17/1]-B[4-15/0.1] |
| E-CKFFSAAM8-P[3-8/0.01]-L[8-21/1]-B[6-20/0.1] |
| E-CKFFSAAM10-P[3-10/0.01]-L[10-23/1]-B[6-20/0.1] |
| E-CKFFSAAM12-P[5-12/0.01]-L[12-24/1]-B[6-30/0.1] |
| E-CKFFSAAM13-P[6-13/0.01]-L[13-26/1]-B[6-30/0.1] |
| E-CKFFSAAM16-P[10-16/0.01]-L[16-32/1]-B[7-30/0.1] |
| E-CKFFSAAM20-P[13-20/0.01]-L[20-40/1]-B[7-30/0.1] |
| E-CKFFSAAP2-P[1.5-2/0.01]-L[2-5/1]-B[2-10/0.1] |
| E-CKFFSAAP3-P[1.5-3/0.01]-L[3-10/1]-B[2-10/0.1] |
| E-CKFFSAAP4-P[1.5-4/0.01]-L[4-10/1]-B[2-10/0.1] |
| E-CKFFSAAP5-P[2-5/0.01]-L[5-10/1]-B[2-15/0.1] |
| E-CKFFSAAP6-P[2-6/0.01]-L[6-17/1]-B[4-15/0.1] |
| E-CKFFSAAP8-P[3-8/0.01]-L[8-21/1]-B[6-20/0.1] |
| E-CKFFSAAP10-P[3-10/0.01]-L[10-23/1]-B[6-20/0.1] |
| E-CKFFSAAP12-P[5-12/0.01]-L[12-24/1]-B[6-30/0.1] |
| E-CKFFSAAP13-P[6-13/0.01]-L[13-26/1]-B[6-30/0.1] |
| E-CKFFSAAP16-P[10-16/0.01]-L[16-32/1]-B[7-30/0.1] |
| E-CKFFSAAP20-P[13-20/0.01]-L[20-40/1]-B[7-30/0.1] |
| E-CKFFSAAS2-P[1.5-2/0.01]-L[2-5/1]-B[2-10/0.1] |
| E-CKFFSAAS3-P[1.5-3/0.01]-L[3-10/1]-B[2-10/0.1] |
| E-CKFFSAAS4-P[1.5-4/0.01]-L[4-10/1]-B[2-10/0.1] |
| E-CKFFSAAS5-P[2-5/0.01]-L[5-10/1]-B[2-15/0.1] |
| E-CKFFSAAS6-P[2-6/0.01]-L[6-17/1]-B[4-15/0.1] |
| E-CKFFSAAS8-P[3-8/0.01]-L[8-21/1]-B[6-20/0.1] |
| E-CKFFSAAS10-P[3-10/0.01]-L[10-23/1]-B[6-20/0.1] |
| E-CKFFSAAS12-P[5-12/0.01]-L[12-24/1]-B[6-30/0.1] |
| E-CKFFSAAS13-P[6-13/0.01]-L[13-26/1]-B[6-30/0.1] |
| E-CKFFSAAS16-P[10-16/0.01]-L[16-32/1]-B[7-30/0.1] |
| E-CKFFSAAS20-P[13-20/0.01]-L[20-40/1]-B[7-30/0.1] |
| E-CKFFSABA2-P[1.5-2/0.01]-L[2-5/1]-B[2-10/0.1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Surface Treatment | Heat Treatment | Steel Type | Stainless Steel Type | Mounting Side Outer Dia. D (mm) | Locating Pin-Mounting Section P (mm) | Positioning Side O.D. Tolerance | Mounting Side Tolerance | Installation Part Length L (mm) | Length of Positioning Portion B (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 4 Day(s) | Not Provided | Not Provided | [SKS3] Alloy tool steel or bearing steel | - | 20 | 13 ～ 20 | p7 | p7 | 20 ～ 40 | 7 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Not Provided | [SKS3] Alloy tool steel or bearing steel | - | 2 | 1.5 ～ 2 | 0/-0.01 | p7 | 2 ～ 5 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Not Provided | [SKS3] Alloy tool steel or bearing steel | - | 3 | 1.5 ～ 3 | 0/-0.01 | p7 | 3 ～ 10 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Not Provided | [SKS3] Alloy tool steel or bearing steel | - | 4 | 1.5 ～ 4 | 0/-0.01 | p7 | 4 ～ 10 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Not Provided | [SKS3] Alloy tool steel or bearing steel | - | 5 | 2 ～ 5 | 0/-0.01 | p7 | 5 ～ 10 | 2 ～ 15 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Not Provided | [SKS3] Alloy tool steel or bearing steel | - | 6 | 2 ～ 6 | 0/-0.01 | p7 | 6 ～ 17 | 4 ～ 15 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Not Provided | [SKS3] Alloy tool steel or bearing steel | - | 8 | 3 ～ 8 | 0/-0.01 | p7 | 8 ～ 21 | 6 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Not Provided | [SKS3] Alloy tool steel or bearing steel | - | 10 | 3 ～ 10 | 0/-0.01 | p7 | 10 ～ 23 | 6 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Not Provided | [SKS3] Alloy tool steel or bearing steel | - | 12 | 5 ～ 12 | 0/-0.01 | p7 | 12 ～ 24 | 6 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Not Provided | [SKS3] Alloy tool steel or bearing steel | - | 13 | 6 ～ 13 | 0/-0.01 | p7 | 13 ～ 26 | 6 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Not Provided | [SKS3] Alloy tool steel or bearing steel | - | 16 | 10 ～ 16 | 0/-0.01 | p7 | 16 ～ 32 | 7 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Not Provided | [SKS3] Alloy tool steel or bearing steel | - | 20 | 13 ～ 20 | 0/-0.01 | p7 | 20 ～ 40 | 7 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 2 | 1.5 ～ 2 | 0.005/0 | 0.005/0 | 2 ～ 5 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 3 | 1.5 ～ 3 | 0.005/0 | 0.005/0 | 3 ～ 10 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 4 | 1.5 ～ 4 | 0.005/0 | 0.005/0 | 4 ～ 10 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 5 | 2 ～ 5 | 0.005/0 | 0.005/0 | 5 ～ 10 | 2 ～ 15 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 6 | 2 ～ 6 | 0.005/0 | 0.005/0 | 6 ～ 17 | 4 ～ 15 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 8 | 3 ～ 8 | 0.005/0 | 0.005/0 | 8 ～ 21 | 6 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 10 | 3 ～ 10 | 0.005/0 | 0.005/0 | 10 ～ 23 | 6 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 12 | 5 ～ 12 | 0.005/0 | 0.005/0 | 12 ～ 24 | 6 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 13 | 6 ～ 13 | 0.005/0 | 0.005/0 | 13 ～ 26 | 6 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 16 | 10 ～ 16 | 0.005/0 | 0.005/0 | 16 ～ 32 | 7 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 20 | 13 ～ 20 | 0.005/0 | 0.005/0 | 20 ～ 40 | 7 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 2 | 1.5 ～ 2 | 0/-0.005 | 0.005/0 | 2 ～ 5 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 3 | 1.5 ～ 3 | 0/-0.005 | 0.005/0 | 3 ～ 10 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 4 | 1.5 ～ 4 | 0/-0.005 | 0.005/0 | 4 ～ 10 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 5 | 2 ～ 5 | 0/-0.005 | 0.005/0 | 5 ～ 10 | 2 ～ 15 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 6 | 2 ～ 6 | 0/-0.005 | 0.005/0 | 6 ～ 17 | 4 ～ 15 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 8 | 3 ～ 8 | 0/-0.005 | 0.005/0 | 8 ～ 21 | 6 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 10 | 3 ～ 10 | 0/-0.005 | 0.005/0 | 10 ～ 23 | 6 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 12 | 5 ～ 12 | 0/-0.005 | 0.005/0 | 12 ～ 24 | 6 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 13 | 6 ～ 13 | 0/-0.005 | 0.005/0 | 13 ～ 26 | 6 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 16 | 10 ～ 16 | 0/-0.005 | 0.005/0 | 16 ～ 32 | 7 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 20 | 13 ～ 20 | 0/-0.005 | 0.005/0 | 20 ～ 40 | 7 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 2 | 1.5 ～ 2 | g7 | 0.005/0 | 2 ～ 5 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 3 | 1.5 ～ 3 | g7 | 0.005/0 | 3 ～ 10 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 4 | 1.5 ～ 4 | g7 | 0.005/0 | 4 ～ 10 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 5 | 2 ～ 5 | g7 | 0.005/0 | 5 ～ 10 | 2 ～ 15 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 6 | 2 ～ 6 | g7 | 0.005/0 | 6 ～ 17 | 4 ～ 15 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 8 | 3 ～ 8 | g7 | 0.005/0 | 8 ～ 21 | 6 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 10 | 3 ～ 10 | g7 | 0.005/0 | 10 ～ 23 | 6 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 12 | 5 ～ 12 | g7 | 0.005/0 | 12 ～ 24 | 6 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 13 | 6 ～ 13 | g7 | 0.005/0 | 13 ～ 26 | 6 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 16 | 10 ～ 16 | g7 | 0.005/0 | 16 ～ 32 | 7 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 20 | 13 ～ 20 | g7 | 0.005/0 | 20 ～ 40 | 7 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 2 | 1.5 ～ 2 | h7 | 0.005/0 | 2 ～ 5 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 3 | 1.5 ～ 3 | h7 | 0.005/0 | 3 ～ 10 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 4 | 1.5 ～ 4 | h7 | 0.005/0 | 4 ～ 10 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 5 | 2 ～ 5 | h7 | 0.005/0 | 5 ～ 10 | 2 ～ 15 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 6 | 2 ～ 6 | h7 | 0.005/0 | 6 ～ 17 | 4 ～ 15 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 8 | 3 ～ 8 | h7 | 0.005/0 | 8 ～ 21 | 6 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 10 | 3 ～ 10 | h7 | 0.005/0 | 10 ～ 23 | 6 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 12 | 5 ～ 12 | h7 | 0.005/0 | 12 ～ 24 | 6 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 13 | 6 ～ 13 | h7 | 0.005/0 | 13 ～ 26 | 6 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 16 | 10 ～ 16 | h7 | 0.005/0 | 16 ～ 32 | 7 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 20 | 13 ～ 20 | h7 | 0.005/0 | 20 ～ 40 | 7 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 2 | 1.5 ～ 2 | m7 | 0.005/0 | 2 ～ 5 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 3 | 1.5 ～ 3 | m7 | 0.005/0 | 3 ～ 10 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 4 | 1.5 ～ 4 | m7 | 0.005/0 | 4 ～ 10 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 5 | 2 ～ 5 | m7 | 0.005/0 | 5 ～ 10 | 2 ～ 15 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 6 | 2 ～ 6 | m7 | 0.005/0 | 6 ～ 17 | 4 ～ 15 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 8 | 3 ～ 8 | m7 | 0.005/0 | 8 ～ 21 | 6 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 10 | 3 ～ 10 | m7 | 0.005/0 | 10 ～ 23 | 6 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 12 | 5 ～ 12 | m7 | 0.005/0 | 12 ～ 24 | 6 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 13 | 6 ～ 13 | m7 | 0.005/0 | 13 ～ 26 | 6 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 16 | 10 ～ 16 | m7 | 0.005/0 | 16 ～ 32 | 7 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 20 | 13 ～ 20 | m7 | 0.005/0 | 20 ～ 40 | 7 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 2 | 1.5 ～ 2 | p7 | 0.005/0 | 2 ～ 5 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 3 | 1.5 ～ 3 | p7 | 0.005/0 | 3 ～ 10 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 4 | 1.5 ～ 4 | p7 | 0.005/0 | 4 ～ 10 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 5 | 2 ～ 5 | p7 | 0.005/0 | 5 ～ 10 | 2 ～ 15 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 6 | 2 ～ 6 | p7 | 0.005/0 | 6 ～ 17 | 4 ～ 15 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 8 | 3 ～ 8 | p7 | 0.005/0 | 8 ～ 21 | 6 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 10 | 3 ～ 10 | p7 | 0.005/0 | 10 ～ 23 | 6 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 12 | 5 ～ 12 | p7 | 0.005/0 | 12 ～ 24 | 6 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 13 | 6 ～ 13 | p7 | 0.005/0 | 13 ～ 26 | 6 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 16 | 10 ～ 16 | p7 | 0.005/0 | 16 ～ 32 | 7 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 20 | 13 ～ 20 | p7 | 0.005/0 | 20 ～ 40 | 7 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 2 | 1.5 ～ 2 | 0/-0.01 | 0.005/0 | 2 ～ 5 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 3 | 1.5 ～ 3 | 0/-0.01 | 0.005/0 | 3 ～ 10 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 4 | 1.5 ～ 4 | 0/-0.01 | 0.005/0 | 4 ～ 10 | 2 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 5 | 2 ～ 5 | 0/-0.01 | 0.005/0 | 5 ～ 10 | 2 ～ 15 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 6 | 2 ～ 6 | 0/-0.01 | 0.005/0 | 6 ～ 17 | 4 ～ 15 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 8 | 3 ～ 8 | 0/-0.01 | 0.005/0 | 8 ～ 21 | 6 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 10 | 3 ～ 10 | 0/-0.01 | 0.005/0 | 10 ～ 23 | 6 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 12 | 5 ～ 12 | 0/-0.01 | 0.005/0 | 12 ～ 24 | 6 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 13 | 6 ～ 13 | 0/-0.01 | 0.005/0 | 13 ～ 26 | 6 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 16 | 10 ～ 16 | 0/-0.01 | 0.005/0 | 16 ～ 32 | 7 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 20 | 13 ～ 20 | 0/-0.01 | 0.005/0 | 20 ～ 40 | 7 ～ 30 | ||
- | 1 Piece(s) | 4 Day(s) | Not Provided | Dip Quenching | - | [SUS440C] SUS440C or equivalent high-hardness corrosion-resistant steel | 2 | 1.5 ～ 2 | 0.005/0 | 0/-0.005 | 2 ～ 5 | 2 ～ 10 |
Loading...
Basic Information
| Basic Shape | Small Head | Insertion Guide Tip Shape | Round | Insertion Guide Tip Type | Flat |
|---|---|---|---|---|---|
| Insertion Guide Specifications | Not Provided | Mounting Side Shape | Straight (Press-Fit) | Application | Standard Shape |
| Shouldered | Not Provided |
Specification/Dimensions
-
Surface Treatment
- Not Provided
-
Heat Treatment
- Not Provided
- Dip Quenching
-
Steel Type
- SKS3
- SKS3
-
Stainless Steel Type
- SUS440C
- SUS440C
-
Mounting Side Outer Dia. D(mm)
-
Locating Pin-Mounting Section P(mm)
-
Positioning Side O.D. Tolerance
- 0/-0.01
- 0/-0.005
- 0.005/0
- g7
- h7
- m7
- p7
-
Mounting Side Tolerance
-
Installation Part Length L(mm)
-
Length of Positioning Portion B(mm)
-
type
- E-BKFFSAAA
- E-BKFFSAAB
- E-BKFFSAAG
- E-BKFFSAAH
- E-BKFFSAAM
- E-BKFFSAAP
- E-BKFFSAAS
- E-BKFFSABA
- E-BKFFSABB
- E-BKFFSABG
- E-BKFFSABH
- E-BKFFSABM
- E-BKFFSABP
- E-BKFFSABS
- E-BKFFSAGA
- E-BKFFSAGB
- E-BKFFSAGG
- E-BKFFSAGH
- E-BKFFSAGM
- E-BKFFSAGP
- E-BKFFSAGS
- E-BKFFSAHA
- E-BKFFSAHB
- E-BKFFSAHG
- E-BKFFSAHH
- E-BKFFSAHM
- E-BKFFSAHP
- E-BKFFSAHS
- E-BKFFSAMA
- E-BKFFSAMB
- E-BKFFSAMG
- E-BKFFSAMH
- E-BKFFSAMM
- E-BKFFSAMP
- E-BKFFSAMS
- E-BKFFSAPA
- E-BKFFSAPB
- E-BKFFSAPG
- E-BKFFSAPH
- E-BKFFSAPM
- E-BKFFSAPP
- E-BKFFSAPS
- E-CKFFSAAA
- E-CKFFSAAB
- E-CKFFSAAG
- E-CKFFSAAH
- E-CKFFSAAM
- E-CKFFSAAP
- E-CKFFSAAS
- E-CKFFSABA
- E-CKFFSABB
- E-CKFFSABG
- E-CKFFSABH
- E-CKFFSABM
- E-CKFFSABP
- E-CKFFSABS
- E-CKFFSAGA
- E-CKFFSAGB
- E-CKFFSAGG
- E-CKFFSAGH
- E-CKFFSAGM
- E-CKFFSAGP
- E-CKFFSAGS
- E-CKFFSAHA
- E-CKFFSAHB
- E-CKFFSAHG
- E-CKFFSAHH
- E-CKFFSAHM
- E-CKFFSAHP
- E-CKFFSAHS
- E-CKFFSAMA
- E-CKFFSAMB
- E-CKFFSAMG
- E-CKFFSAMH
- E-CKFFSAMM
- E-CKFFSAMP
- E-CKFFSAMS
- E-CKFFSAPA
- E-CKFFSAPB
- E-CKFFSAPG
- E-CKFFSAPH
- E-CKFFSAPM
- E-CKFFSAPP
- E-CKFFSAPS
- E-GKFFSAGG
- E-GKFFSAGH
- E-GKFFSAGM
- E-GKFFSAGP
- E-GKFFSAGS
- E-GKFFSAHG
- E-GKFFSAHH
- E-GKFFSAHM
- E-GKFFSAHP
- E-GKFFSAHS
- E-GKFFSAMG
- E-GKFFSAMH
- E-GKFFSAMM
- E-GKFFSAMP
- E-GKFFSAMS
- E-GKFFSAPG
- E-GKFFSAPH
- E-GKFFSAPM
- E-GKFFSAPP
- E-GKFFSAPS
- E-HKFFSAGG
- E-HKFFSAGH
- E-HKFFSAGM
- E-HKFFSAGP
- E-HKFFSAGS
- E-HKFFSAHG
- E-HKFFSAHH
- E-HKFFSAHM
- E-HKFFSAHP
- E-HKFFSAHS
- E-HKFFSAMG
- E-HKFFSAMH
- E-HKFFSAMM
- E-HKFFSAMP
- E-HKFFSAMS
- E-HKFFSAPG
- E-HKFFSAPH
- E-HKFFSAPM
- E-HKFFSAPP
- E-HKFFSAPS
- E-KFFSAAA
- E-KFFSAAB
- E-KFFSAAG
- E-KFFSAAH
- E-KFFSAAM
- E-KFFSAAP
- E-KFFSAAS
- E-KFFSABA
- E-KFFSABB
- E-KFFSABG
- E-KFFSABH
- E-KFFSABM
- E-KFFSABP
- E-KFFSABS
- E-KFFSAGA
- E-KFFSAGB
- E-KFFSAGG
- E-KFFSAGH
- E-KFFSAGM
- E-KFFSAGP
- E-KFFSAGS
- E-KFFSAHA
- E-KFFSAHB
- E-KFFSAHG
- E-KFFSAHH
- E-KFFSAHM
- E-KFFSAHP
- E-KFFSAHS
- E-KFFSAMA
- E-KFFSAMB
- E-KFFSAMG
- E-KFFSAMH
- E-KFFSAMM
- E-KFFSAMP
- E-KFFSAMS
- E-KFFSAPA
- E-KFFSAPB
- E-KFFSAPG
- E-KFFSAPH
- E-KFFSAPM
- E-KFFSAPP
- E-KFFSAPS
- E-SKFFSAAA
- E-SKFFSAAB
- E-SKFFSAAG
- E-SKFFSAAH
- E-SKFFSAAM
- E-SKFFSAAP
- E-SKFFSAAS
- E-SKFFSABA
- E-SKFFSABB
- E-SKFFSABG
- E-SKFFSABH
- E-SKFFSABM
- E-SKFFSABP
- E-SKFFSABS
- E-SKFFSAGA
- E-SKFFSAGB
- E-SKFFSAGG
- E-SKFFSAGH
- E-SKFFSAGM
- E-SKFFSAGP
- E-SKFFSAGS
- E-SKFFSAHA
- E-SKFFSAHB
- E-SKFFSAHG
- E-SKFFSAHH
- E-SKFFSAHM
- E-SKFFSAHP
- E-SKFFSAHS
- E-SKFFSAMA
- E-SKFFSAMB
- E-SKFFSAMG
- E-SKFFSAMH
- E-SKFFSAMM
- E-SKFFSAMP
- E-SKFFSAMS
- E-SKFFSAPA
- E-SKFFSAPB
- E-SKFFSAPG
- E-SKFFSAPH
- E-SKFFSAPM
- E-SKFFSAPP
- E-SKFFSAPS
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 4 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Feed Pins - Solid - Press Fit
- Feed Pins - Shouldered - Tapped
- Locating Pins - Large/Small Head, Tapered (Set Screw-Circumference Groove Shape)
- Locating Pins - Sphere Large/Small Head (Set Screw-Set Screw Flat Shape)
- Locating Pins Large Head, Tapered, Tapped
- Locating Pins Small Head, Spherical, Press Fit, Standard
- Locating Pins Large Head, Tapered, Configurable - Taper Angle, Tolerance Selectable, Tapped
- [Clean & Pack]Locating Pin - Plastic, Small Diameter
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy