(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Locating Pins Large Head, Tapered, Screw Mounted, Standard/Compact
Part Number
Configured Part Number is shown.
Product Overview
The locating pin is used for the spatial positioning in the directions of X and Y axes, mainly using the workpiece hole as the positioning benchmark or used in conjunction with bushings, in which the large head tapered screw mounted type is easy to install, widely used and saves installation space.
Dimensional Drawing
Martensitic stainless steel products have an identification groove on D part.Specification Table
 | Part Number |  P | - |  L | - |  B | ||||||
| - | ||||||||||||
 Type |  Shape |  D | ||||||||||
| JPT | MA | 10 | - | 14.00 | ||||||||
| FPT | MA | 10 | - | P14.00 | - | L15 | - | B6.0 | ||||
| FPTC | MA | 12 | - | P13.00 | - | L6 | - | B3.0 | ||||
■Material Specification Table
| Material No. |  Material |  Surface Treatment |  Hardness | Standard | Compact | Shape Code | |
| P Dimension Configurable | P/L/B Dimension Configurable | P/L/B Dimension Configurable | |||||
| ① | Alloy tool steel or bearing steel | - | Quenching hardness 60～63HRC | E-JPT | E-FPT | E-FPTC | MA(Round) MD(Diamond) |
| ② | Alloy tool steel or bearing steel | Hard Chrome Plated | Quenching hardness 50～55HRC Plating hardness 750HV～ | - | E-GFPT | - | |
| ③ | Alloy tool steel or bearing steel | - | - | - | E-BFPT | - | |
| ④ | Austenitic stainless steel | - | - | E-SJPT | E-SFPT | E-SFPTC | |
| ⑤ | Austenitic stainless steel | Hard Chrome Plated | Plating hardness 750HV～ | E-HJPT | E-HFPT | - | |
| ⑥ | Martensitic stainless steel | - | Quenching hardness 50～55HRC | E-CJPT | E-CFPT | - | |
If there are requirements on rust prevention, give priority to the hard-chrome plated or austenitic stainless steel products.Please understand that E-HFPT series products are temporarily not available in the diamond shape.■Applicable Bolts
| D | g7 | d | d1 | H | Applicable Bolt M |
| 10 | -0.005 -0.020 | 4.5 | 8 | 5 | M4 |
| 12 | -0.006 -0.024 | 5.5 | 9.5 | 6.5 | M5 |
| 13 | 6.6 | 11 | 7.5 | M6 | |
| 16 | 9 | 14 | 10 | M8 | |
| 20 | -0.007 -0.028 |
■Standard, P Dimension Configurable
| Part Number | P 0.01mm increments | L | B | C | m | (W) | ||
| Type | Shape | D | ||||||
| E-JPT E-SJPT E-HJPT E-CJPT | MA(Round) MD(Diamond) | 10 | 14.00~17.00 | 15 | 10 | 2 | 4 | 4 |
| 12 | 15.00~18.00 | 5 | ||||||
| 13 | 17.00~20.00 | 22 | 5.5 | |||||
| 16 | 20.00~27.00 | 3 | 5 | 7 | ||||
| 20 | 23.00~30.00 | 30 | 15 | 9 | ||||
■Standard, P/L/B Dimension Configurable
| Part Number | P 0.01mm increments | L 1mm increments | B 0.1mm increments | C | m | (W) | ||
| Type | Shape | D | ||||||
| E-FPT E-GFPT E-BFPT E-SFPT E-HFPT E-CFPT | MA(Round) MD(Diamond) | 10 | 14.00~17.00 | 5~20 | 4.0~20.0 | 2 | 4 | 4 |
| 12 | 15.00~18.00 | 6~24 | 7.0~20.0 | 5 | ||||
| 13 | 17.00~20.00 | 6~26 | 8.0~20.0 | 5.5 | ||||
| 16 | 20.00~27.00 | 7~32 | 8.0~20.0 | 3 | 5 | 7 | ||
| 20 | 23.00~30.00 | 8~40 | 8.0~20.0 | 9 | ||||
C dimension (chamfering) is 0.5 when L < D.Please understand that E-HFPT series products are temporarily not available in the diamond shape.■Compact Type
| Part Number | P 0.01mm increments | L 1mm increments | B 0.1mm increments | C | m | (W) | ||
| Type | Shape | D | ||||||
| E-FPTC E-SFPTC | MA(Round) MD(Diamond) | 10 | 11.00~15.00 | 5~14 | 3.0~16.0 | 0.5 | 2 | 4 |
| 12 | 13.00~17.00 | 6~15 | 3.0~18.0 | 5 | ||||
| 13 | 14.00~18.00 | 6~16 | 3.0~20.0 | 5.5 | ||||
| 16 | 17.00~21.00 | 7~18 | 3.0~20.0 | 3 | 7 | |||
| 20 | 21.00~25.00 | 8~20 | 3.0~20.0 | 9 | ||||
Product Features
Precautions
①Dimensional tolerance and fit parameter table For details, click 
here
②Reference table for common dimensions without indicated tolerance (medium accuracy m) For details, clickhere
③Reference value for thread mounting torque The tightening torque (reference value) is the strength class (8.8) in the technical datahere, and the tightening state lasts for more than 24 hours. Not applicable when using locking agents or spring washers.
here②Reference table for common dimensions without indicated tolerance (medium accuracy m) For details, click
here③Reference value for thread mounting torque The tightening torque (reference value) is the strength class (8.8) in the technical data
here, and the tightening state lasts for more than 24 hours. Not applicable when using locking agents or spring washers.Example of Use
Example introduction: Round and diamond types combined for positioning
①The combination of round and diamond types in the fixture enables more accurate positioning in A direction and reduction of the mating hole pitch error in B direction.
②Of the 2 locating pins, the cylindrical shape is taken as reference for 1 locating pin, and the cut-flat position on the round shape (diamond type) in the direction of the center distance of the two holes is taken as reference for the other, which enables mounting/dismounting operations and ensures positioning accuracy.
③Taking advantage of the different heights of the 2 locating pins, insert the tall pin for pre-positioning and then the short pin for precise positioning.
①The combination of round and diamond types in the fixture enables more accurate positioning in A direction and reduction of the mating hole pitch error in B direction.
②Of the 2 locating pins, the cylindrical shape is taken as reference for 1 locating pin, and the cut-flat position on the round shape (diamond type) in the direction of the center distance of the two holes is taken as reference for the other, which enables mounting/dismounting operations and ensures positioning accuracy.
③Taking advantage of the different heights of the 2 locating pins, insert the tall pin for pre-positioning and then the short pin for precise positioning.
Application Industries
| Lithium battery | Semiconductor | Medical | ||
 |  |  | ||
| Smart Phones | Electronic & Electrical | Robotics | ||
 |  |  |
Related Products
| Bushings for Locating Pins, Shouldered | Bushings for Locating Pins, Straight | Bushings for Locating Pins, Slotted Hole, Shouldered | ||
 |  |  | ||
| Representative model: JBH6-8 | Representative model: JBA3-8 | Representative model: JBPE10-P6.8-W4.82-L15 |
Related Documents
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-BFPTMA10-P[14-17/0.01]-L[5-20/1]-B[4-20/0.1] |
| E-BFPTMA12-P[15-18/0.01]-L[6-24/1]-B[7-20/0.1] |
| E-BFPTMA13-P[17-20/0.01]-L[6-26/1]-B[8-20/0.1] |
| E-BFPTMA16-P[20-27/0.01]-L[7-32/1]-B[8-20/0.1] |
| E-BFPTMA20-P[23-30/0.01]-L[8-40/1]-B[8-20/0.1] |
| E-BFPTMD10-P[14-17/0.01]-L[5-20/1]-B[4-20/0.1] |
| E-BFPTMD12-P[15-18/0.01]-L[6-24/1]-B[7-20/0.1] |
| E-BFPTMD13-P[17-20/0.01]-L[6-26/1]-B[8-20/0.1] |
| E-BFPTMD16-P[20-27/0.01]-L[7-32/1]-B[8-20/0.1] |
| E-BFPTMD20-P[23-30/0.01]-L[8-40/1]-B[8-20/0.1] |
| E-CFPTMA10-P[14-17/0.01]-L[5-20/1]-B[4-20/0.1] |
| E-CFPTMA12-P[15-18/0.01]-L[6-24/1]-B[7-20/0.1] |
| E-CFPTMA13-P[17-20/0.01]-L[6-26/1]-B[8-20/0.1] |
| E-CFPTMA16-P[20-27/0.01]-L[7-32/1]-B[8-20/0.1] |
| E-CFPTMA20-P[23-30/0.01]-L[8-40/1]-B[8-20/0.1] |
| E-CFPTMD10-P[14-17/0.01]-L[5-20/1]-B[4-20/0.1] |
| E-CFPTMD12-P[15-18/0.01]-L[6-24/1]-B[7-20/0.1] |
| E-CFPTMD13-P[17-20/0.01]-L[6-26/1]-B[8-20/0.1] |
| E-CFPTMD16-P[20-27/0.01]-L[7-32/1]-B[8-20/0.1] |
| E-CFPTMD20-P[23-30/0.01]-L[8-40/1]-B[8-20/0.1] |
| E-CJPTMA10-[14-17/0.01] |
| E-CJPTMA12-[15-18/0.01] |
| E-CJPTMA13-[17-20/0.01] |
| E-CJPTMA16-[20-27/0.01] |
| E-CJPTMA20-[23-30/0.01] |
| E-CJPTMD10-[14-17/0.01] |
| E-CJPTMD12-[15-18/0.01] |
| E-CJPTMD13-[17-20/0.01] |
| E-CJPTMD16-[20-27/0.01] |
| E-CJPTMD20-[23-30/0.01] |
| E-FPTCMA10-P[11-15/0.01]-L[5-14/1]-B[3-16/0.1] |
| E-FPTCMA12-P[13-17/0.01]-L[6-15/1]-B[3-18/0.1] |
| E-FPTCMA13-P[14-18/0.01]-L[6-16/1]-B[3-20/0.1] |
| E-FPTCMA16-P[17-21/0.01]-L[7-18/1]-B[3-20/0.1] |
| E-FPTCMA20-P[21-25/0.01]-L[8-20/1]-B[3-20/0.1] |
| E-FPTCMD10-P[11-15/0.01]-L[5-14/1]-B[3-16/0.1] |
| E-FPTCMD12-P[13-17/0.01]-L[6-15/1]-B[3-18/0.1] |
| E-FPTCMD13-P[14-18/0.01]-L[6-16/1]-B[3-20/0.1] |
| E-FPTCMD16-P[17-21/0.01]-L[7-18/1]-B[3-20/0.1] |
| E-FPTCMD20-P[21-25/0.01]-L[8-20/1]-B[3-20/0.1] |
| E-FPTMA10-P[14-17/0.01]-L[5-20/1]-B[4-20/0.1] |
| E-FPTMA12-P[15-18/0.01]-L[6-24/1]-B[7-20/0.1] |
| E-FPTMA13-P[17-20/0.01]-L[6-26/1]-B[8-20/0.1] |
| E-FPTMA16-P[20-27/0.01]-L[7-32/1]-B[8-20/0.1] |
| E-FPTMA20-P[23-30/0.01]-L[8-40/1]-B[8-20/0.1] |
| E-FPTMD10-P[14-17/0.01]-L[5-20/1]-B[4-20/0.1] |
| E-FPTMD12-P[15-18/0.01]-L[6-24/1]-B[7-20/0.1] |
| E-FPTMD13-P[17-20/0.01]-L[6-26/1]-B[8-20/0.1] |
| E-FPTMD16-P[20-27/0.01]-L[7-32/1]-B[8-20/0.1] |
| E-FPTMD20-P[23-30/0.01]-L[8-40/1]-B[8-20/0.1] |
| E-GFPTMA10-P[14-17/0.01]-L[5-20/1]-B[4-20/0.1] |
| E-GFPTMA12-P[15-18/0.01]-L[6-24/1]-B[7-20/0.1] |
| E-GFPTMA13-P[17-20/0.01]-L[6-26/1]-B[8-20/0.1] |
| E-GFPTMA16-P[20-27/0.01]-L[7-32/1]-B[8-20/0.1] |
| E-GFPTMA20-P[23-30/0.01]-L[8-40/1]-B[8-20/0.1] |
| E-GFPTMD10-P[14-17/0.01]-L[5-20/1]-B[4-20/0.1] |
| E-GFPTMD12-P[15-18/0.01]-L[6-24/1]-B[7-20/0.1] |
| E-GFPTMD13-P[17-20/0.01]-L[6-26/1]-B[8-20/0.1] |
| E-GFPTMD16-P[20-27/0.01]-L[7-32/1]-B[8-20/0.1] |
| E-GFPTMD20-P[23-30/0.01]-L[8-40/1]-B[8-20/0.1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Basic Shape | Insertion Guide Tip Shape | Surface Treatment | Heat Treatment | Steel Type | Stainless Steel Type | Locating Side Outer Dia. P (Ø) (mm) | Mounting Side Outer Dia. D (mm) | Mounting Section Length L (mm) | Positioning Part Length B (mm) | Dimension Configurable Type | Application | Shouldered | Mounting Part Length L (mm) | Positioning Part Length B (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Not Provided | [SKS3] Alloy tool steel | - | 14 ～ 17 | 10 | - | - | Standard | - | - | 5 ～ 20 | 4 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Not Provided | [SKS3] Alloy tool steel | - | 15 ～ 18 | 12 | - | - | Standard | - | - | 6 ～ 24 | 7 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Not Provided | [SKS3] Alloy tool steel | - | 17 ～ 20 | 13 | - | - | Standard | - | - | 6 ～ 26 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Not Provided | [SKS3] Alloy tool steel | - | 20 ～ 27 | 16 | - | - | Standard | - | - | 7 ～ 32 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Not Provided | [SKS3] Alloy tool steel | - | 23 ～ 30 | 20 | - | - | Standard | - | - | 8 ～ 40 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Screw Mounted | Diamond | Not Provided | Not Provided | [SKS3] Alloy tool steel | - | 14 ～ 17 | 10 | - | - | Standard | - | - | 5 ～ 20 | 4 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Screw Mounted | Diamond | Not Provided | Not Provided | [SKS3] Alloy tool steel | - | 15 ～ 18 | 12 | - | - | Standard | - | - | 6 ～ 24 | 7 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Screw Mounted | Diamond | Not Provided | Not Provided | [SKS3] Alloy tool steel | - | 17 ～ 20 | 13 | - | - | Standard | - | - | 6 ～ 26 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Screw Mounted | Diamond | Not Provided | Not Provided | [SKS3] Alloy tool steel | - | 20 ～ 27 | 16 | - | - | Standard | - | - | 7 ～ 32 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Screw Mounted | Diamond | Not Provided | Not Provided | [SKS3] Alloy tool steel | - | 23 ～ 30 | 20 | - | - | Standard | - | - | 8 ～ 40 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Dip Quenching | - | [SUS440C] Equivalent SUS440C | 14 ～ 17 | 10 | - | - | Standard | - | - | 5 ～ 20 | 4 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Dip Quenching | - | [SUS440C] Equivalent SUS440C | 15 ～ 18 | 12 | - | - | Standard | - | - | 6 ～ 24 | 7 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Dip Quenching | - | [SUS440C] Equivalent SUS440C | 17 ～ 20 | 13 | - | - | Standard | - | - | 6 ～ 26 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Dip Quenching | - | [SUS440C] Equivalent SUS440C | 20 ～ 27 | 16 | - | - | Standard | - | - | 7 ～ 32 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Dip Quenching | - | [SUS440C] Equivalent SUS440C | 23 ～ 30 | 20 | - | - | Standard | - | - | 8 ～ 40 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | Not Provided | Dip Quenching | - | [SUS440C] Equivalent SUS440C | 14 ～ 17 | 10 | - | - | Standard | - | - | 5 ～ 20 | 4 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | Not Provided | Dip Quenching | - | [SUS440C] Equivalent SUS440C | 15 ～ 18 | 12 | - | - | Standard | - | - | 6 ～ 24 | 7 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | Not Provided | Dip Quenching | - | [SUS440C] Equivalent SUS440C | 17 ～ 20 | 13 | - | - | Standard | - | - | 6 ～ 26 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | Not Provided | Dip Quenching | - | [SUS440C] Equivalent SUS440C | 20 ～ 27 | 16 | - | - | Standard | - | - | 7 ～ 32 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | Not Provided | Dip Quenching | - | [SUS440C] Equivalent SUS440C | 23 ～ 30 | 20 | - | - | Standard | - | - | 8 ～ 40 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Dip Quenching | - | [SUS440C] Equivalent SUS440C | 14 ～ 17 | 10 | 15 | 10 | Standard, P Configurable | Standard Shape | Not Provided | - | - | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Dip Quenching | - | [SUS440C] Equivalent SUS440C | 15 ～ 18 | 12 | 15 | 10 | Standard, P Configurable | Standard Shape | Not Provided | - | - | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Dip Quenching | - | [SUS440C] Equivalent SUS440C | 17 ～ 20 | 13 | 22 | 10 | Standard, P Configurable | Standard Shape | Not Provided | - | - | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Dip Quenching | - | [SUS440C] Equivalent SUS440C | 20 ～ 27 | 16 | 22 | 10 | Standard, P Configurable | Standard Shape | Not Provided | - | - | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Dip Quenching | - | [SUS440C] Equivalent SUS440C | 23 ～ 30 | 20 | 30 | 15 | Standard, P Configurable | Standard Shape | Not Provided | - | - | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | Not Provided | Dip Quenching | - | [SUS440C] Equivalent SUS440C | 14 ～ 17 | 10 | 15 | 10 | Standard, P Configurable | Standard Shape | Not Provided | - | - | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | Not Provided | Dip Quenching | - | [SUS440C] Equivalent SUS440C | 15 ～ 18 | 12 | 15 | 10 | Standard, P Configurable | Standard Shape | Not Provided | - | - | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | Not Provided | Dip Quenching | - | [SUS440C] Equivalent SUS440C | 17 ～ 20 | 13 | 22 | 10 | Standard, P Configurable | Standard Shape | Not Provided | - | - | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | Not Provided | Dip Quenching | - | [SUS440C] Equivalent SUS440C | 20 ～ 27 | 16 | 22 | 10 | Standard, P Configurable | Standard Shape | Not Provided | - | - | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | Not Provided | Dip Quenching | - | [SUS440C] Equivalent SUS440C | 23 ～ 30 | 20 | 30 | 15 | Standard, P Configurable | Standard Shape | Not Provided | - | - | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Dip Quenching | [SKS3] Alloy tool steel | - | 11 ～ 15 | 10 | - | - | Compact | - | - | 5 ～ 14 | 3 ～ 16 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Dip Quenching | [SKS3] Alloy tool steel | - | 13 ～ 17 | 12 | - | - | Compact | - | - | 6 ～ 15 | 3 ～ 18 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Dip Quenching | [SKS3] Alloy tool steel | - | 14 ～ 18 | 13 | - | - | Compact | - | - | 6 ～ 16 | 3 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Dip Quenching | [SKS3] Alloy tool steel | - | 17 ～ 21 | 16 | - | - | Compact | - | - | 7 ～ 18 | 3 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Dip Quenching | [SKS3] Alloy tool steel | - | 21 ～ 25 | 20 | - | - | Compact | - | - | 8 ～ 20 | 3 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | Not Provided | Dip Quenching | [SKS3] Alloy tool steel | - | 11 ～ 15 | 10 | - | - | Compact | - | - | 5 ～ 14 | 3 ～ 16 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | Not Provided | Dip Quenching | [SKS3] Alloy tool steel | - | 13 ～ 17 | 12 | - | - | Compact | - | - | 6 ～ 15 | 3 ～ 18 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | Not Provided | Dip Quenching | [SKS3] Alloy tool steel | - | 14 ～ 18 | 13 | - | - | Compact | - | - | 6 ～ 16 | 3 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | Not Provided | Dip Quenching | [SKS3] Alloy tool steel | - | 17 ～ 21 | 16 | - | - | Compact | - | - | 7 ～ 18 | 3 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | Not Provided | Dip Quenching | [SKS3] Alloy tool steel | - | 21 ～ 25 | 20 | - | - | Compact | - | - | 8 ～ 20 | 3 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Dip Quenching | [SKS3] Alloy tool steel | - | 14 ～ 17 | 10 | - | - | Standard | - | - | 5 ～ 20 | 4 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Dip Quenching | [SKS3] Alloy tool steel | - | 15 ～ 18 | 12 | - | - | Standard | - | - | 6 ～ 24 | 7 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Dip Quenching | [SKS3] Alloy tool steel | - | 17 ～ 20 | 13 | - | - | Standard | - | - | 6 ～ 26 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Dip Quenching | [SKS3] Alloy tool steel | - | 20 ～ 27 | 16 | - | - | Standard | - | - | 7 ～ 32 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | Not Provided | Dip Quenching | [SKS3] Alloy tool steel | - | 23 ～ 30 | 20 | - | - | Standard | - | - | 8 ～ 40 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | Not Provided | Dip Quenching | [SKS3] Alloy tool steel | - | 14 ～ 17 | 10 | - | - | Standard | - | - | 5 ～ 20 | 4 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | Not Provided | Dip Quenching | [SKS3] Alloy tool steel | - | 15 ～ 18 | 12 | - | - | Standard | - | - | 6 ～ 24 | 7 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | Not Provided | Dip Quenching | [SKS3] Alloy tool steel | - | 17 ～ 20 | 13 | - | - | Standard | - | - | 6 ～ 26 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | Not Provided | Dip Quenching | [SKS3] Alloy tool steel | - | 20 ～ 27 | 16 | - | - | Standard | - | - | 7 ～ 32 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | Not Provided | Dip Quenching | [SKS3] Alloy tool steel | - | 23 ～ 30 | 20 | - | - | Standard | - | - | 8 ～ 40 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | [Hard Chrome Plating] Hard Chrome Plating (Plating Thickness 3µm or more) | Dip Quenching | [SKS3] Alloy tool steel | - | 14 ～ 17 | 10 | - | - | Standard | - | - | 5 ～ 20 | 4 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | [Hard Chrome Plating] Hard Chrome Plating (Plating Thickness 3µm or more) | Dip Quenching | [SKS3] Alloy tool steel | - | 15 ～ 18 | 12 | - | - | Standard | - | - | 6 ～ 24 | 7 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | [Hard Chrome Plating] Hard Chrome Plating (Plating Thickness 3µm or more) | Dip Quenching | [SKS3] Alloy tool steel | - | 17 ～ 20 | 13 | - | - | Standard | - | - | 6 ～ 26 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | [Hard Chrome Plating] Hard Chrome Plating (Plating Thickness 3µm or more) | Dip Quenching | [SKS3] Alloy tool steel | - | 20 ～ 27 | 16 | - | - | Standard | - | - | 7 ～ 32 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Round | [Hard Chrome Plating] Hard Chrome Plating (Plating Thickness 3µm or more) | Dip Quenching | [SKS3] Alloy tool steel | - | 23 ～ 30 | 20 | - | - | Standard | - | - | 8 ～ 40 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | [Hard Chrome Plating] Hard Chrome Plating (Plating Thickness 3µm or more) | Dip Quenching | [SKS3] Alloy tool steel | - | 14 ～ 17 | 10 | - | - | Standard | - | - | 5 ～ 20 | 4 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | [Hard Chrome Plating] Hard Chrome Plating (Plating Thickness 3µm or more) | Dip Quenching | [SKS3] Alloy tool steel | - | 15 ～ 18 | 12 | - | - | Standard | - | - | 6 ～ 24 | 7 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | [Hard Chrome Plating] Hard Chrome Plating (Plating Thickness 3µm or more) | Dip Quenching | [SKS3] Alloy tool steel | - | 17 ～ 20 | 13 | - | - | Standard | - | - | 6 ～ 26 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | [Hard Chrome Plating] Hard Chrome Plating (Plating Thickness 3µm or more) | Dip Quenching | [SKS3] Alloy tool steel | - | 20 ～ 27 | 16 | - | - | Standard | - | - | 7 ～ 32 | 8 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | Large Head | Diamond | [Hard Chrome Plating] Hard Chrome Plating (Plating Thickness 3µm or more) | Dip Quenching | [SKS3] Alloy tool steel | - | 23 ～ 30 | 20 | - | - | Standard | - | - | 8 ～ 40 | 8 ～ 20 |
Loading...
Basic Information
| Insertion Guide Tip Type | Tapered | Insertion Guide Specifications | Screw Mounted | Mounting Side Shape | Straight (Press-Fit) |
|---|---|---|---|---|---|
| Locating Side O.D. Tolerance | 0/-0.02 | Mounting Side Tolerance | g7 |
Specification/Dimensions
-
Basic Shape
-
Large Head -
Screw Mounted
-
-
Insertion Guide Tip Shape
-
Round -
Diamond
-
-
Surface Treatment
- Not Provided
- Hard Chrome Plating
-
Heat Treatment
- Not Provided
- Dip Quenching
-
Steel Type
- SKS3
- SKS3
-
Stainless Steel Type
- SUS440C
- SUS440C
-
Locating Side Outer Dia. P (Ø)(mm)
-
Mounting Side Outer Dia. D(mm)
-
Mounting Section Length L(mm)
-
Positioning Part Length B(mm)
-
Dimension Configurable Type
- Compact
- Standard
- Standard, P Configurable
-
Application
- Standard Shape
-
Shouldered
- Not Provided
-
Mounting Part Length L(mm)
-
Positioning Part Length B(mm)
-
type
- E-BFPTMA
- E-BFPTMD
- E-CFPTMA
- E-CFPTMD
- E-CJPTMA
- E-CJPTMD
- E-FPTCMA
- E-FPTCMD
- E-FPTMA
- E-FPTMD
- E-GFPTMA
- E-GFPTMD
- E-HFPTMA
- E-HJPTMA
- E-JPTMA
- E-JPTMD
- E-SFPTCMA
- E-SFPTCMD
- E-SFPTMA
- E-SFPTMD
- E-SJPTMA
- E-SJPTMD
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 4 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Locating Pins - Plastic, Screw Mounted
- Locating Pins - Tapped
- Locating Pins Small Head Round Tapered
- [Clean & Pack] Locating Pin - Small Head, Tapered, Press Fit
- Locating Pins Large/Small Head, Tapered, Notch Shape
- Locating Pin Straight Taper Type, Press-Fit Type
- Straight Pin (BJ791)
- Ear Flex Locator (Locate Pin)
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy