(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Linear Shafts Both End Threaded with Undercut, Wrench Flats (Part Numbers)
This is an economy item, The price is cheaper than the MISUMI standard product.
Part Number
Configured Part Number is shown.
Product Overview
The linear guide shaft is a high-precision shaft product that can be used in combination with linear bearings and other bushing-type products. It not only offers excellent wear resistance, but also provides a variety of additional processing options.
Dimensional Drawing
■ Material Specifications
| Type |  Material |  Hardness |  Surface Treatment | |
| With Wrench Slot Type | ||||
| Standard Type | ||||
| D Tolerance g7 | D Tolerance f8 | |||
| E-SAFU | - | 45 or GCr15 | High-frequency quenching For effective hardened layer depth, please click  Surface Hardness Reference45 or GCr15 55HRC~ SUS440C or equivalent high-hardness corrosion-resistant steel 53HRC or more | - |
| E-SSAFU | - | SUS440C or equivalent high-hardness corrosion-resistant steel | ||
| E-PSAFU | - | 45 or GCr15 | Hard chrome plating Plating hardness HV750~ Plating thickness 3µ or more | |
| E-PSSAFU | - | SUS440C or equivalent high-hardness corrosion-resistant steel | ||
| - | E-PSAGU | 45 | - | Hard chrome plating Plating hardness: HV750~ Plating thickness: 10µ or more |
The machined part at the shaft end (effective thread length + approx. 10 mm) may have reduced hardness due to the annealing effect of machining.If rust prevention is required, please give priority to products with hard chrome plating Surface Treatment.If used in combination with linear bearings, please choose products with high-frequency quenching.Specification Table
| Part Number | Specified unit: 1 mm | Select | Wrench Slot Size | (Y) Max. | ||||||||||||
| Type | D | L | F·T | M·N (Coarse thread) | SC | W | ℓ1 | |||||||||
| Standard Type | 8 | 25–1090 | 5 ≤ F ≤ M×3 5 ≤ T ≤ N×3 F-(g) ≥ pitch×3T-(g) ≥ pitch×3 | 5 | 6 | SC = specified unit 1 mmSC + ℓ1 ≤ LSC ≥ 0Wrench slot details >>See (PDF) | 7 | 8 | 1100 | |||||||
| (With wrench slot type) (D Tolerance g7) E-SAFU E-SSAFU E-PSAFU E-PSSAFU (D Tolerance f8) E-PSAGU | 10 | 25–1190 | 5 | 6 | 8 | 8 | 1200 | |||||||||
| 12 | 25–1390 | 5 | 6 | 8 | 10 | 10 | 10 | 1400 | ||||||||
| 13 | 25–1390 | 5 | 6 | 8 | 10 | 12 | 11 | 1400 | ||||||||
| 15 | 25–1390 | 5 | 6 | 8 | 10 | 12 | 13 | 1400 | ||||||||
| 16 | 25–1390 | 5 | 6 | 8 | 10 | 12 | 14 | 1400 | ||||||||
| 20 | 25–1390 | 5 | 6 | 8 | 10 | 12 | 16 | 17 | 1400 | |||||||
| 25 | 25–1390 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 22 | 1400 | |||||
| 30 | 25–1490 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 27 | 15 | 1500 | |||||
| 35 | 25–1490 | 10 | 12 | 16 | 20 | 24 | 30 | 30 | 1500 | |||||||
| 40 | 25–1490 | 12 | 16 | 20 | 24 | 30 | 36 | 20 | 1500 | |||||||
| 50 | 25–1490 | 16 | 20 | 24 | 30 | 41 | 1500 | |||||||||
Outer diameters 35, 40, and 50 are limited to E-PSAFU specifications only.| D Tolerance | ||
| D | g7 | f8 |
| 8 | -0.005 -0.020 | -0.013 -0.035 |
| 10 | ||
| 12 | -0.006 -0.024 | -0.016 -0.043 |
| 13 | ||
| 15 | ||
| 16 | ||
| 18 | ||
| 20 | -0.007 -0.028 | -0.020 -0.053 |
| 25 | ||
| 30 | ||
| 35 | -0.009 -0.034 | - |
| 40 | ||
| 50 | ||
Alterations
 | Type | - | L | - | F | - | M (MMC MMS) | - | T | - | N (NMC NMS) | - | SC | - | H | - | (LKC: etc.) | |
| SAFU30 | - | 300 | - | F40 | - | M20 | - | T46 | - | N16 | - | SC20 | - | LKC |
| Alterations | Code | Spec. | ||
 | LKC | Change L dimension tolerance Ordering Code LKC Applicable conditions The maximum L dimension for precision type is 200 When using LKC, the unit for specifying the L dimension can be 0.1 mm L<200 → L±0.03200 ≤ L<500 → L±0.05 L ≥ 500 → L±0.1 | ||
 | SX | |||
 | FC | |||
 | WFC | |||
 | RC | Add one flat machining at a 90-degree position Ordering Code RC10 Applicable conditions Applicable for D=10–30  Not suitable for precision typeCannot be used together with WRC | ||
 | WRC | Add two flat surfaces at 90-degree positions Ordering Code WRC10-Y10 Applicable conditions Applicable for D=10 to 30 Not suitable for precision typeCannot be used together with RCCannot be machined on the same plane | ||
 | MMC MMS NMC NMS | Change external thread to fine thread Ordering Code MMC14 (change M to MMC) MMS14 (change M to MMS) NMC14 (change N to NMC) NMS14 (change N to NMS) | ||
For details on additional machining with a summary, please refer to the additional machining overview. P.107When selecting multiple additional machining options, there must be at least a 2 mm gap between machining locations. P.108Additional machining may result in reduced hardness. P.106Product Features
Feature 1: Offers high-precision dimensional tolerances and is widely used in various precision equipment.
Feature 2: Uses bearing steel with excellent wear resistance (45 or GCr15) and SUS440C or equivalent high-hardness, corrosion-resistant steel, which undergo high-frequency quenching to enhance wear resistance while maintaining original toughness.
Feature 3: Various additional processing options are available to meet different usage environments.
Feature 4: Typically used in combination with linear bearing products, it provides excellent linear guidance. Compared to standard shaft and bushing structures, even during high-speed reciprocating motion, there is minimal wear.
Feature 5: Hard chrome plating is available as a Surface Treatment, offering excellent rust resistance. The coating hardness reaches HV750, so it will not be easily worn even when used with high-hardness workpieces.
Feature 2: Uses bearing steel with excellent wear resistance (45 or GCr15) and SUS440C or equivalent high-hardness, corrosion-resistant steel, which undergo high-frequency quenching to enhance wear resistance while maintaining original toughness.
Feature 3: Various additional processing options are available to meet different usage environments.
Feature 4: Typically used in combination with linear bearing products, it provides excellent linear guidance. Compared to standard shaft and bushing structures, even during high-speed reciprocating motion, there is minimal wear.
Feature 5: Hard chrome plating is available as a Surface Treatment, offering excellent rust resistance. The coating hardness reaches HV750, so it will not be easily worn even when used with high-hardness workpieces.
Precautions
 | (2) Reduced hardness in machined areas After quenching the base material, machining may cause reduced hardness due to annealing in the following areas: - All external threads - All steps - Internal threads: When M ≥ D/2, double-hole internal threads, and hard chrome plated products made of SUS440C or other high-hardness corrosion-resistant steels - Additional machining of wrench slots (SC-WSC-SX) - Additional machining of flat surfaces (FC-WFC) - Additional machining of V-grooves (VC-WVC) - Except for fully hardened types. |
Only the shaded area in section D is hard chrome plated. | (3) Plating after Surface Treatment After Surface Treatment of the base material, machining is performed, and the following areas are not plated: - Groove areas -External thread sections -Internal thread sections -Wrench slots, V-grooves, flat surfaces, and cut surfaces -The inside of pipe-type guide shafts is not hard chrome plated and may rust. |
Example of Use
Application Industries
| Medical | Semiconductors | Electronics and Electrical Appliances | ||
 |  |  | ||
| Smartphones | Food | Automotive | ||
 |  |  |
Related Products
| Linear Bearing Standard Type, Straight Cylinder Type | Bearing Housing Assembly T Type | Retaining Ring Open Type | ||
 |  |  | ||
| Representative model: LMU6 | Representative model: BGHFS6000ZZ-30 | Representative model: PSCS10-10 | ||
| Advantages: High quality, low price, short lead time | Advantages: Complete range, high precision and high quality | Advantages: Supporting shaft products, complete range |
Related Documents
Corrosion resistance of metal materials and Surface Treatments Click 
Corrosion Resistance Table
Corrosion Resistance TablePart Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-PSAFU8-[25-1090/1]-F[5-18/1]-M[5,6]-T[5-18/1]-N[5,6]-SC[0-782/1] |
| E-PSAFU8-[25-1090/1]-F[5-18/1]-M[5,6]-T[5-18/1]-NMC6-SC[0-782/1] |
| E-PSAFU8-[25-1090/1]-F[5-18/1]-MMC6-T[5-18/1]-N[5,6]-SC[0-782/1] |
| E-PSAFU8-[25-1090/1]-F[5-18/1]-MMC6-T[5-18/1]-NMC6-SC[0-782/1] |
| E-PSAFU10-[25-1190/1]-F[5-24/1]-M[5,6,8]-T[5-24/1]-N[5,6,8]-SC[0-782/1] |
| E-PSAFU10-[25-1190/1]-F[5-24/1]-M[5,6,8]-T[5-24/1]-NMC[6,8]-SC[0-782/1] |
| E-PSAFU10-[25-1190/1]-F[5-24/1]-MMC[6,8]-T[5-24/1]-N[5,6,8]-SC[0-782/1] |
| E-PSAFU10-[25-1190/1]-F[5-24/1]-MMC[6,8]-T[5-24/1]-NMC[6,8]-SC[0-782/1] |
| E-PSAFU12-[25-1390/1]-F[5-30/1]-M[5,6,8,10]-T[5-30/1]-N[5,6,8,10]-SC[0-980/1] |
| E-PSAFU12-[25-1390/1]-F[5-30/1]-M[5,6,8,10]-T[5-30/1]-NMC[6,8,10]-SC[0-980/1] |
| E-PSAFU12-[25-1390/1]-F[5-30/1]-M[5,6,8,10]-T[5-30/1]-NMS10-SC[0-980/1] |
| E-PSAFU12-[25-1390/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-N[5,6,8,10]-SC[0-980/1] |
| E-PSAFU12-[25-1390/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-NMC[6,8,10]-SC[0-980/1] |
| E-PSAFU12-[25-1390/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-NMS10-SC[0-980/1] |
| E-PSAFU12-[25-1390/1]-F[5-30/1]-MMS10-T[5-30/1]-N[5,6,8,10]-SC[0-980/1] |
| E-PSAFU12-[25-1390/1]-F[5-30/1]-MMS10-T[5-30/1]-NMC[6,8,10]-SC[0-980/1] |
| E-PSAFU12-[25-1390/1]-F[5-30/1]-MMS10-T[5-30/1]-NMS10-SC[0-980/1] |
| E-PSAFU13-[25-1390/1]-F[5-36/1]-M[5,6,8,10,12]-T[5-36/1]-N[5,6,8,10,12]-SC[0-980/1] |
| E-PSAFU13-[25-1390/1]-F[5-36/1]-M[5,6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]-SC[0-980/1] |
| E-PSAFU13-[25-1390/1]-F[5-36/1]-M[5,6,8,10,12]-T[5-36/1]-NMS10-SC[0-980/1] |
| E-PSAFU13-[25-1390/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-N[5,6,8,10,12]-SC[0-980/1] |
| E-PSAFU13-[25-1390/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]-SC[0-980/1] |
| E-PSAFU13-[25-1390/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMS10-SC[0-980/1] |
| E-PSAFU13-[25-1390/1]-F[5-36/1]-MMS10-T[5-36/1]-N[5,6,8,10,12]-SC[0-980/1] |
| E-PSAFU13-[25-1390/1]-F[5-36/1]-MMS10-T[5-36/1]-NMC[6,8,10,12]-SC[0-980/1] |
| E-PSAFU13-[25-1390/1]-F[5-36/1]-MMS10-T[5-36/1]-NMS10-SC[0-980/1] |
| E-PSAFU15-[25-1390/1]-F[5-36/1]-M[5,6,8,10,12]-T[5-36/1]-N[5,6,8,10,12]-SC[0-980/1] |
| E-PSAFU15-[25-1390/1]-F[5-36/1]-M[5,6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]-SC[0-980/1] |
| E-PSAFU15-[25-1390/1]-F[5-36/1]-M[5,6,8,10,12]-T[5-36/1]-NMS[10,12]-SC[0-980/1] |
| E-PSAFU15-[25-1390/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-N[5,6,8,10,12]-SC[0-980/1] |
| E-PSAFU15-[25-1390/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]-SC[0-980/1] |
| E-PSAFU15-[25-1390/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMS[10,12]-SC[0-980/1] |
| E-PSAFU15-[25-1390/1]-F[5-36/1]-MMS[10,12]-T[5-36/1]-N[5,6,8,10,12]-SC[0-980/1] |
| E-PSAFU15-[25-1390/1]-F[5-36/1]-MMS[10,12]-T[5-36/1]-NMC[6,8,10,12]-SC[0-980/1] |
| E-PSAFU15-[25-1390/1]-F[5-36/1]-MMS[10,12]-T[5-36/1]-NMS[10,12]-SC[0-980/1] |
| E-PSAFU16-[25-1390/1]-F[5-36/1]-M[5,6,8,10,12]-T[5-36/1]-N[5,6,8,10,12]-SC[0-1180/1] |
| E-PSAFU16-[25-1390/1]-F[5-36/1]-M[5,6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]-SC[0-1180/1] |
| E-PSAFU16-[25-1390/1]-F[5-36/1]-M[5,6,8,10,12]-T[5-36/1]-NMS[10,12,14]-SC[0-1180/1] |
| E-PSAFU16-[25-1390/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-N[5,6,8,10,12]-SC[0-1180/1] |
| E-PSAFU16-[25-1390/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]-SC[0-1180/1] |
| E-PSAFU16-[25-1390/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMS[10,12,14]-SC[0-1180/1] |
| E-PSAFU16-[25-1390/1]-F[5-36/1]-MMS[10,12,14]-T[5-36/1]-N[5,6,8,10,12]-SC[0-1180/1] |
| E-PSAFU16-[25-1390/1]-F[5-36/1]-MMS[10,12,14]-T[5-36/1]-NMC[6,8,10,12]-SC[0-1180/1] |
| E-PSAFU16-[25-1390/1]-F[5-36/1]-MMS[10,12,14]-T[5-36/1]-NMS[10,12,14]-SC[0-1180/1] |
| E-PSAFU20-[25-1390/1]-F[5-48/1]-M[5,6,8,10,12,16]-T[5-48/1]-N[5,6,8,10,12,16]-SC[0-1180/1] |
| E-PSAFU20-[25-1390/1]-F[5-48/1]-M[5,6,8,10,12,16]-T[5-48/1]-NMC[6,8,10,12,15,17]-SC[0-1180/1] |
| E-PSAFU20-[25-1390/1]-F[5-48/1]-M[5,6,8,10,12,16]-T[5-48/1]-NMS[10,12,14,18]-SC[0-1180/1] |
| E-PSAFU20-[25-1390/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-N[5,6,8,10,12,16]-SC[0-1180/1] |
| E-PSAFU20-[25-1390/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-NMC[6,8,10,12,15,17]-SC[0-1180/1] |
| E-PSAFU20-[25-1390/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-NMS[10,12,14,18]-SC[0-1180/1] |
| E-PSAFU20-[25-1390/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-N[5,6,8,10,12,16]-SC[0-1180/1] |
| E-PSAFU20-[25-1390/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-NMC[6,8,10,12,15,17]-SC[0-1180/1] |
| E-PSAFU20-[25-1390/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-NMS[10,12,14,18]-SC[0-1180/1] |
| E-PSAFU25-[25-1390/1]-F[5-72/1]-M[5,6,8,10,12,16,20,24]-T[5-72/1]-N[5,6,8,10,12,16,20,24]-SC[0-1180/1] |
| E-PSAFU25-[25-1390/1]-F[5-72/1]-M[5,6,8,10,12,16,20,24]-T[5-72/1]-NMC[8,10,12,15,17,20]-SC[0-1180/1] |
| E-PSAFU25-[25-1390/1]-F[5-72/1]-M[5,6,8,10,12,16,20,24]-T[5-72/1]-NMS[10,12,14,18]-SC[0-1180/1] |
| E-PSAFU25-[25-1390/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-T[5-72/1]-N[5,6,8,10,12,16,20,24]-SC[0-1180/1] |
| E-PSAFU25-[25-1390/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-T[5-72/1]-NMC[8,10,12,15,17,20]-SC[0-1180/1] |
| E-PSAFU25-[25-1390/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-T[5-72/1]-NMS[10,12,14,18]-SC[0-1180/1] |
| E-PSAFU25-[25-1390/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-N[5,6,8,10,12,16,20,24]-SC[0-1180/1] |
| E-PSAFU25-[25-1390/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-NMC[8,10,12,15,17,20]-SC[0-1180/1] |
| E-PSAFU25-[25-1390/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-NMS[10,12,14,18]-SC[0-1180/1] |
| E-PSAFU30-[25-1490/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-N[8,10,12,16,20,24]-SC[0-1490/1] |
| E-PSAFU30-[25-1490/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-NMC[8,10,12,15,17,20,25]-SC[0-1490/1] |
| E-PSAFU30-[25-1490/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-NMS[10,12,14,18]-SC[0-1490/1] |
| E-PSAFU30-[25-1490/1]-F[5-72/1]-MMC[8,10,12,15,17,20,25]-T[5-72/1]-N[8,10,12,16,20,24]-SC[0-1490/1] |
| E-PSAFU30-[25-1490/1]-F[5-72/1]-MMC[8,10,12,15,17,20,25]-T[5-72/1]-NMC[8,10,12,15,17,20,25]-SC[0-1490/1] |
| E-PSAFU30-[25-1490/1]-F[5-72/1]-MMC[8,10,12,15,17,20,25]-T[5-72/1]-NMS[10,12,14,18]-SC[0-1490/1] |
| E-PSAFU30-[25-1490/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-N[8,10,12,16,20,24]-SC[0-1490/1] |
| E-PSAFU30-[25-1490/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-NMC[8,10,12,15,17,20,25]-SC[0-1490/1] |
| E-PSAFU30-[25-1490/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-NMS[10,12,14,18]-SC[0-1490/1] |
| E-PSAFU35-[25-1490/1]-F[5-90/1]-M[10,12,16,20,24,30]-T[5-90/1]-N[10,12,16,20,24,30]-SC[0-1475/1] |
| E-PSAFU40-[25-1490/1]-F[5-90/1]-M[12,16,20,24,30]-T[5-90/1]-N[12,16,20,24,30]-SC[0-1470/1] |
| E-PSAFU50-[25-1490/1]-F[5-90/1]-M[16,20,24,30]-T[5-90/1]-N[16,20,24,30]-SC[0-1470/1] |
| E-PSAGU8-[25-1090/1]-F[5-18/1]-M[5,6]-T[5-18/1]-N[5,6]-SC[0-782/1] |
| E-PSAGU8-[25-1090/1]-F[5-18/1]-M[5,6]-T[5-18/1]-NMC6-SC[0-782/1] |
| E-PSAGU8-[25-1090/1]-F[5-18/1]-MMC6-T[5-18/1]-N[5,6]-SC[0-782/1] |
| E-PSAGU8-[25-1090/1]-F[5-18/1]-MMC6-T[5-18/1]-NMC6-SC[0-782/1] |
| E-PSAGU10-[25-1190/1]-F[5-24/1]-M[5,6,8]-T[5-24/1]-N[5,6,8]-SC[0-782/1] |
| E-PSAGU10-[25-1190/1]-F[5-24/1]-M[5,6,8]-T[5-24/1]-NMC[6,8]-SC[0-782/1] |
| E-PSAGU10-[25-1190/1]-F[5-24/1]-MMC[6,8]-T[5-24/1]-N[5,6,8]-SC[0-782/1] |
| E-PSAGU10-[25-1190/1]-F[5-24/1]-MMC[6,8]-T[5-24/1]-NMC[6,8]-SC[0-782/1] |
| E-PSAGU12-[25-1390/1]-F[5-30/1]-M[5,6,8,10]-T[5-30/1]-N[6,8,10]-SC[0-980/1] |
| E-PSAGU12-[25-1390/1]-F[5-30/1]-M[5,6,8,10]-T[5-30/1]-NMC[6,8,10]-SC[0-980/1] |
| E-PSAGU12-[25-1390/1]-F[5-30/1]-M[5,6,8,10]-T[5-30/1]-NMS10-SC[0-980/1] |
| E-PSAGU12-[25-1390/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-N[6,8,10]-SC[0-980/1] |
| E-PSAGU12-[25-1390/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-NMC[6,8,10]-SC[0-980/1] |
| E-PSAGU12-[25-1390/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-NMS10-SC[0-980/1] |
| E-PSAGU12-[25-1390/1]-F[5-30/1]-MMS10-T[5-30/1]-N[6,8,10]-SC[0-980/1] |
| E-PSAGU12-[25-1390/1]-F[5-30/1]-MMS10-T[5-30/1]-NMC[6,8,10]-SC[0-980/1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Material | Heat Treatment | Surface Treatment | Shaft Dia. D (Ø) | Length L (mm) | Shaft Fit Tolerance | F (mm) | SC (mm) | External Thread M (Coarse Thread) (mm) | Change external thread to fine thread [NMC] (mm) | Change external thread to fine thread [NMS] (mm) | Change external thread to fine thread [MMC] (mm) | Change external thread to fine thread [MMS] (mm) | T (mm) | External Thread N (Coarse Thread) (mm) | Female Thread M (mm) | Female Thread N (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 8 | 25 ～ 1090 | g7 | 5 ～ 18 | 0 ～ 782 | 6 | - | - | - | - | 5 ～ 18 | 6 | 5 | 5 | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 8 | 25 ～ 1090 | g7 | 5 ～ 18 | 0 ～ 782 | 6 | 6 | - | - | - | 5 ～ 18 | - | 5 | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 8 | 25 ～ 1090 | g7 | 5 ～ 18 | 0 ～ 782 | - | - | - | 6 | - | 5 ～ 18 | 6 | - | 5 | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 8 | 25 ～ 1090 | g7 | 5 ～ 18 | 0 ～ 782 | - | 6 | - | 6 | - | 5 ～ 18 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 10 | 25 ～ 1190 | g7 | 5 ～ 24 | 0 ～ 782 | 6 ～ 8 | - | - | - | - | 5 ～ 24 | 6 ～ 8 | 5 | 5 | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 10 | 25 ～ 1190 | g7 | 5 ～ 24 | 0 ～ 782 | 6 ～ 8 | 6 ～ 8 | - | - | - | 5 ～ 24 | - | 5 | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 10 | 25 ～ 1190 | g7 | 5 ～ 24 | 0 ～ 782 | - | - | - | 6 ～ 8 | - | 5 ～ 24 | 6 ～ 8 | - | 5 | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 10 | 25 ～ 1190 | g7 | 5 ～ 24 | 0 ～ 782 | - | 6 ～ 8 | - | 6 ～ 8 | - | 5 ～ 24 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 12 | 25 ～ 1390 | g7 | 5 ～ 30 | 0 ～ 980 | 6 ～ 8 | - | - | - | - | 5 ～ 30 | 6 ～ 8 | 5 | 5 | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 12 | 25 ～ 1390 | g7 | 5 ～ 30 | 0 ～ 980 | 6 ～ 8 | 6 ～ 8 | - | - | - | 5 ～ 30 | - | 5 | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 12 | 25 ～ 1390 | g7 | 5 ～ 30 | 0 ～ 980 | 6 ～ 8 | - | 10 | - | - | 5 ～ 30 | - | 5 | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 12 | 25 ～ 1390 | g7 | 5 ～ 30 | 0 ～ 980 | - | - | - | 6 ～ 8 | - | 5 ～ 30 | 6 ～ 8 | - | 5 | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 12 | 25 ～ 1390 | g7 | 5 ～ 30 | 0 ～ 980 | - | 6 ～ 8 | - | 6 ～ 8 | - | 5 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 12 | 25 ～ 1390 | g7 | 5 ～ 30 | 0 ～ 980 | - | - | 10 | 6 ～ 8 | - | 5 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 12 | 25 ～ 1390 | g7 | 5 ～ 30 | 0 ～ 980 | - | - | - | - | 10 | 5 ～ 30 | 6 ～ 8 | - | 5 | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 12 | 25 ～ 1390 | g7 | 5 ～ 30 | 0 ～ 980 | - | 6 ～ 8 | - | - | 10 | 5 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 12 | 25 ～ 1390 | g7 | 5 ～ 30 | 0 ～ 980 | - | - | 10 | - | 10 | 5 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 13 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 980 | 6 ～ 8 | - | - | - | - | 5 ～ 36 | 6 ～ 8 | 5 | 5 | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 13 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 980 | 6 ～ 8 | 6 ～ 8 | - | - | - | 5 ～ 36 | - | 5 | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 13 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 980 | 6 ～ 8 | - | 10 | - | - | 5 ～ 36 | - | 5 | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 13 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 980 | - | - | - | 6 ～ 8 | - | 5 ～ 36 | 6 ～ 8 | - | 5 | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 13 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 980 | - | 6 ～ 8 | - | 6 ～ 8 | - | 5 ～ 36 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 13 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 980 | - | - | 10 | 6 ～ 8 | - | 5 ～ 36 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 13 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 980 | - | - | - | - | 10 | 5 ～ 36 | 6 ～ 8 | - | 5 | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 13 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 980 | - | 6 ～ 8 | - | - | 10 | 5 ～ 36 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 13 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 980 | - | - | 10 | - | 10 | 5 ～ 36 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 15 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 980 | 6 ～ 8 | - | - | - | - | 5 ～ 36 | 6 ～ 8 | 5 | 5 | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 15 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 980 | 6 ～ 8 | 6 ～ 8 | - | - | - | 5 ～ 36 | - | 5 | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 15 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 980 | 6 ～ 8 | - | 10 | - | - | 5 ～ 36 | - | 5 | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 15 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 980 | - | - | - | 6 ～ 8 | - | 5 ～ 36 | 6 ～ 8 | - | 5 | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 15 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 980 | - | 6 ～ 8 | - | 6 ～ 8 | - | 5 ～ 36 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 15 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 980 | - | - | 10 | 6 ～ 8 | - | 5 ～ 36 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 15 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 980 | - | - | - | - | 10 | 5 ～ 36 | 6 ～ 8 | - | 5 | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 15 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 980 | - | 6 ～ 8 | - | - | 10 | 5 ～ 36 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 15 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 980 | - | - | 10 | - | 10 | 5 ～ 36 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 16 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 1180 | 6 ～ 8 | - | - | - | - | 5 ～ 36 | 6 ～ 8 | 5 | 5 | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 16 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 1180 | 6 ～ 8 | 6 ～ 8 | - | - | - | 5 ～ 36 | - | 5 | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 16 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 1180 | 6 ～ 8 | - | 10 | - | - | 5 ～ 36 | - | 5 | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 16 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 1180 | - | - | - | 6 ～ 8 | - | 5 ～ 36 | 6 ～ 8 | - | 5 | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 16 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 1180 | - | 6 ～ 8 | - | 6 ～ 8 | - | 5 ～ 36 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 16 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 1180 | - | - | 10 | 6 ～ 8 | - | 5 ～ 36 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 16 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 1180 | - | - | - | - | 10 | 5 ～ 36 | 6 ～ 8 | - | 5 | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 16 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 1180 | - | 6 ～ 8 | - | - | 10 | 5 ～ 36 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 16 | 25 ～ 1390 | g7 | 5 ～ 36 | 0 ～ 1180 | - | - | 10 | - | 10 | 5 ～ 36 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 20 | 25 ～ 1390 | g7 | 5 ～ 48 | 0 ～ 1180 | 6 ～ 8 | - | - | - | - | 5 ～ 48 | 6 ～ 8 | 5 | 5 | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 20 | 25 ～ 1390 | g7 | 5 ～ 48 | 0 ～ 1180 | 6 ～ 8 | 6 ～ 8 | - | - | - | 5 ～ 48 | - | 5 | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 20 | 25 ～ 1390 | g7 | 5 ～ 48 | 0 ～ 1180 | 6 ～ 8 | - | 10 | - | - | 5 ～ 48 | - | 5 | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 20 | 25 ～ 1390 | g7 | 5 ～ 48 | 0 ～ 1180 | - | - | - | 6 ～ 8 | - | 5 ～ 48 | 6 ～ 8 | - | 5 | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 20 | 25 ～ 1390 | g7 | 5 ～ 48 | 0 ～ 1180 | - | 6 ～ 8 | - | 6 ～ 8 | - | 5 ～ 48 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 20 | 25 ～ 1390 | g7 | 5 ～ 48 | 0 ～ 1180 | - | - | 10 | 6 ～ 8 | - | 5 ～ 48 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 20 | 25 ～ 1390 | g7 | 5 ～ 48 | 0 ～ 1180 | - | - | - | - | 10 | 5 ～ 48 | 6 ～ 8 | - | 5 | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 20 | 25 ～ 1390 | g7 | 5 ～ 48 | 0 ～ 1180 | - | 6 ～ 8 | - | - | 10 | 5 ～ 48 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 20 | 25 ～ 1390 | g7 | 5 ～ 48 | 0 ～ 1180 | - | - | 10 | - | 10 | 5 ～ 48 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 25 | 25 ～ 1390 | g7 | 5 ～ 72 | 0 ～ 1180 | 6 ～ 8 | - | - | - | - | 5 ～ 72 | 6 ～ 8 | 5 ～ 24 | 5 ～ 24 | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 25 | 25 ～ 1390 | g7 | 5 ～ 72 | 0 ～ 1180 | 6 ～ 8 | 8 | - | - | - | 5 ～ 72 | - | 5 ～ 24 | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 25 | 25 ～ 1390 | g7 | 5 ～ 72 | 0 ～ 1180 | 6 ～ 8 | - | 10 | - | - | 5 ～ 72 | - | 5 ～ 24 | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 25 | 25 ～ 1390 | g7 | 5 ～ 72 | 0 ～ 1180 | - | - | - | 8 | - | 5 ～ 72 | 6 ～ 8 | - | 5 ～ 24 | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 25 | 25 ～ 1390 | g7 | 5 ～ 72 | 0 ～ 1180 | - | 8 | - | 8 | - | 5 ～ 72 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 25 | 25 ～ 1390 | g7 | 5 ～ 72 | 0 ～ 1180 | - | - | 10 | 8 | - | 5 ～ 72 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 25 | 25 ～ 1390 | g7 | 5 ～ 72 | 0 ～ 1180 | - | - | - | - | 10 | 5 ～ 72 | 6 ～ 8 | - | 5 ～ 24 | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 25 | 25 ～ 1390 | g7 | 5 ～ 72 | 0 ～ 1180 | - | 8 | - | - | 10 | 5 ～ 72 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 25 | 25 ～ 1390 | g7 | 5 ～ 72 | 0 ～ 1180 | - | - | 10 | - | 10 | 5 ～ 72 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 30 | 25 ～ 1490 | g7 | 5 ～ 72 | 0 ～ 1490 | 8 ～ 24 | - | - | - | - | 5 ～ 72 | 8 ～ 24 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 30 | 25 ～ 1490 | g7 | 5 ～ 72 | 0 ～ 1490 | 8 ～ 24 | 8 ～ 25 | - | - | - | 5 ～ 72 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 30 | 25 ～ 1490 | g7 | 5 ～ 72 | 0 ～ 1490 | 8 ～ 24 | - | 10 ～ 18 | - | - | 5 ～ 72 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 30 | 25 ～ 1490 | g7 | 5 ～ 72 | 0 ～ 1490 | - | - | - | 8 ～ 25 | - | 5 ～ 72 | 8 ～ 24 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 30 | 25 ～ 1490 | g7 | 5 ～ 72 | 0 ～ 1490 | - | 8 ～ 25 | - | 8 ～ 25 | - | 5 ～ 72 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 30 | 25 ～ 1490 | g7 | 5 ～ 72 | 0 ～ 1490 | - | - | 10 ～ 18 | 8 ～ 25 | - | 5 ～ 72 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 30 | 25 ～ 1490 | g7 | 5 ～ 72 | 0 ～ 1490 | - | - | - | - | 10 ～ 18 | 5 ～ 72 | 8 ～ 24 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 30 | 25 ～ 1490 | g7 | 5 ～ 72 | 0 ～ 1490 | - | 8 ～ 25 | - | - | 10 ～ 18 | 5 ～ 72 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 30 | 25 ～ 1490 | g7 | 5 ～ 72 | 0 ～ 1490 | - | - | 10 ～ 18 | - | 10 ～ 18 | 5 ～ 72 | - | - | - | ||
- | 1 Piece(s) | 10 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 35 | 25 ～ 1490 | g7 | 5 ～ 90 | 0 ～ 1475 | - | - | - | - | - | 5 ～ 90 | - | 20 ～ 24 | 20 ～ 24 | ||
- | 1 Piece(s) | 10 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 40 | 25 ～ 1490 | g7 | 5 ～ 90 | 0 ～ 1470 | - | - | - | - | - | 5 ～ 90 | - | 20 ～ 24 | 20 ～ 24 | ||
- | 1 Piece(s) | 10 Day(s) | [Steel] S45C or GCr15 | Induction Hardened | Hard Chrome Plating | 50 | 25 ～ 1490 | g7 | 5 ～ 90 | 0 ～ 1470 | - | - | - | - | - | 5 ～ 90 | - | 20 ～ 24 | 20 ～ 24 | ||
- | 1 Piece(s) | 7 Day(s) | S45C | Not Provided | Hard Chrome Plating | 8 | 25 ～ 1090 | f8 | 5 ～ 18 | 0 ～ 782 | 6 | - | - | - | - | 5 ～ 18 | 6 | 5 | 5 | ||
- | 1 Piece(s) | 7 Day(s) | S45C | Not Provided | Hard Chrome Plating | 8 | 25 ～ 1090 | f8 | 5 ～ 18 | 0 ～ 782 | 6 | 6 | - | - | - | 5 ～ 18 | - | 5 | - | ||
- | 1 Piece(s) | 7 Day(s) | S45C | Not Provided | Hard Chrome Plating | 8 | 25 ～ 1090 | f8 | 5 ～ 18 | 0 ～ 782 | - | - | - | 6 | - | 5 ～ 18 | 6 | - | 5 | ||
- | 1 Piece(s) | 7 Day(s) | S45C | Not Provided | Hard Chrome Plating | 8 | 25 ～ 1090 | f8 | 5 ～ 18 | 0 ～ 782 | - | 6 | - | 6 | - | 5 ～ 18 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | S45C | Not Provided | Hard Chrome Plating | 10 | 25 ～ 1190 | f8 | 5 ～ 24 | 0 ～ 782 | 6 ～ 8 | - | - | - | - | 5 ～ 24 | 6 ～ 8 | 5 | 5 | ||
- | 1 Piece(s) | 7 Day(s) | S45C | Not Provided | Hard Chrome Plating | 10 | 25 ～ 1190 | f8 | 5 ～ 24 | 0 ～ 782 | 6 ～ 8 | 6 ～ 8 | - | - | - | 5 ～ 24 | - | 5 | - | ||
- | 1 Piece(s) | 7 Day(s) | S45C | Not Provided | Hard Chrome Plating | 10 | 25 ～ 1190 | f8 | 5 ～ 24 | 0 ～ 782 | - | - | - | 6 ～ 8 | - | 5 ～ 24 | 6 ～ 8 | - | 5 | ||
- | 1 Piece(s) | 7 Day(s) | S45C | Not Provided | Hard Chrome Plating | 10 | 25 ～ 1190 | f8 | 5 ～ 24 | 0 ～ 782 | - | 6 ～ 8 | - | 6 ～ 8 | - | 5 ～ 24 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | S45C | Not Provided | Hard Chrome Plating | 12 | 25 ～ 1390 | f8 | 5 ～ 30 | 0 ～ 980 | 6 ～ 8 | - | - | - | - | 5 ～ 30 | 6 ～ 8 | 5 | - | ||
- | 1 Piece(s) | 7 Day(s) | S45C | Not Provided | Hard Chrome Plating | 12 | 25 ～ 1390 | f8 | 5 ～ 30 | 0 ～ 980 | 6 ～ 8 | 6 ～ 8 | - | - | - | 5 ～ 30 | - | 5 | - | ||
- | 1 Piece(s) | 7 Day(s) | S45C | Not Provided | Hard Chrome Plating | 12 | 25 ～ 1390 | f8 | 5 ～ 30 | 0 ～ 980 | 6 ～ 8 | - | 10 | - | - | 5 ～ 30 | - | 5 | - | ||
- | 1 Piece(s) | 7 Day(s) | S45C | Not Provided | Hard Chrome Plating | 12 | 25 ～ 1390 | f8 | 5 ～ 30 | 0 ～ 980 | - | - | - | 6 ～ 8 | - | 5 ～ 30 | 6 ～ 8 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | S45C | Not Provided | Hard Chrome Plating | 12 | 25 ～ 1390 | f8 | 5 ～ 30 | 0 ～ 980 | - | 6 ～ 8 | - | 6 ～ 8 | - | 5 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | S45C | Not Provided | Hard Chrome Plating | 12 | 25 ～ 1390 | f8 | 5 ～ 30 | 0 ～ 980 | - | - | 10 | 6 ～ 8 | - | 5 ～ 30 | - | - | - | ||
- | 1 Piece(s) | 7 Day(s) | S45C | Not Provided | Hard Chrome Plating | 12 | 25 ～ 1390 | f8 | 5 ～ 30 | 0 ～ 980 | - | - | - | - | 10 | 5 ～ 30 | 6 ～ 8 | - | - | ||
- | 1 Piece(s) | 7 Day(s) | S45C | Not Provided | Hard Chrome Plating | 12 | 25 ～ 1390 | f8 | 5 ～ 30 | 0 ～ 980 | - | 6 ～ 8 | - | - | 10 | 5 ～ 30 | - | - | - |
Loading...
Basic Information
| Basic Shape | Solid | End Shape (Left) | Threaded | End Shape (Right) | Threaded |
|---|---|---|---|---|---|
| Shaft End Perpendicularity | Perpendicularity (0.2) | Precision | Standard | Fastening Tool Type | With Wrench Slot |
Specification/Dimensions
-
Material
- S45C
- Steel
- Stainless Steel
-
Heat Treatment
- Not Provided
- Induction Hardened
-
Surface Treatment
- Not Provided
- Hard Chrome Plating
-
Shaft Dia. D(Ø)
-
Length L(mm)
-
Shaft Fit Tolerance
-
F(mm)
-
SC(mm)
-
External Thread M (Coarse Thread)(mm)
-
Change external thread to fine thread [NMC](mm)
-
Change external thread to fine thread [NMS](mm)
-
Change external thread to fine thread [MMC](mm)
-
Change external thread to fine thread [MMS](mm)
-
T(mm)
-
External Thread N (Coarse Thread)(mm)
-
Female Thread M(mm)
-
Female Thread N(mm)
-
type
- E-PSAFU
- E-PSAGU
- E-PSSAFU
- E-SAFU
- E-SSAFU
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 7 Day(s) or Less
- 10 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- High Precision Linear Shafts - One End Stepped, Both Ends Tapped / One End Stepped, Both Ends Tapped with Wrench Flats
- Linear Shafts-One Ends Threaded
- Linear Shafts-Both Ends Threaded with Wrench Flats / Cross-Drilled Hole
- Shafts - Both Ends Tapped Hollow Shafts - Not applicable to Both Ends Tapped Hollow Shafts / Both Ends Tapped Hollow with Wrench Flats
- Linear Shaft Straight Type
- Linear Shafts Both Ends Tapped with Wrench Flats
- Linear Shafts Both End Stepped, Both End Tapped with Wrench Flats
- Tube Guide Shafts Straight Rod Type
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy