(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Loading

  • [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Linear Shafts One End Threaded with Undercut, One End Tapped

Linear Shafts One End Threaded with Undercut, One End Tapped

MISUMI

MiSUMi Economy

MISUMI

This is an economy item, The price is cheaper than the MISUMI standard product.

Part Number

Configured Part Number is shown.

Product Overview
The linear guide shaft is a high-precision shaft product that can be used in combination with linear bearings and other bushing-type products. It not only offers excellent wear resistance, but also provides a variety of additional processing options.
Dimensional Drawing
MISUMI guide shaft with external thread on one end, internal thread with undercut groove on the other end – product introduction

■ Material Specifications
Type Material Hardness Surface Treatment
Standard Type
D Tolerance g7D Tolerance f8
E-SAFD-45 or GCr15High-frequency quenching
Effective hardened layer depth
Please click Surface Hardness Reference
45 or GCr15 55HRC~
SUS440C or equivalent high-hardness corrosion-resistant steel 53HRC or more		-
E-SSAFD-SUS440C or equivalent high-hardness corrosion-resistant steel
E-PSAFD-45 or GCr15Hard chrome plating
Plating hardness HV750~
Plating thickness 3µ or more
E-PSSAFD-SUS440C or equivalent high-hardness corrosion-resistant steel
-E-PSAGD45-Hard chrome plating
Plating hardness: HV750~
Plating thickness: 10µ or more
The machined part at the shaft end (effective thread length + approx. 10 mm) may have reduced hardness due to the annealing effect of machining.
If rust prevention is required, please give priority to products with hard chrome plating Surface Treatment.
If used in combination with linear bearings, please choose products with high-frequency quenching.
Alterations
AlterationsCodeSpec.
Misumi guide shaft, one end stepped with internal thread typeLKCChange L dimension tolerance.
Ordering Code LKC
Applicable conditions The maximum L dimension for precision type is 200
When using LKC, the specified unit for L dimension can be 0.1 mm
L<200 → L±0.03
200 ≤ L<500 → L±0.05
L ≥ 500 → L±0.1
　Introduction to MISUMI guide shaftsSCAdd a wrench slot at one location
Ordering Code SC5
SC = specified unit 1 mm
SC + ℓ1 < L
SC = 0 or SC ≥ 1
Applicable conditions Applicable for D ≥ 8
Cannot be used together with WSC
DWℓ1
878
108
121010
1311
1513
DWℓ1
161410
2017
2522
302715
Misumi guide shaft, one end stepped with internal thread typeWSCAdditional wrench slot machining at 2 locations
Ordering Code WSC12-X8
WSC, X = specified unit 1 mm
WSC + X + ℓ1 × 2 ≤ L - 2
WSC(X) ≥ 0
Cannot be machined on the same plane
DWℓ1
878
108
121010
1311
1513
1614
1816
DWℓ1
201710
2522
302715
3530
403620
5041
　Misumi guide shaft, one end stepped with internal thread typeFCAdditional flat machining at 1 location
Ordering Code FC10-E8
Applicable conditions Not applicable for precision type
FC, E = specified unit 1 mm
When D ≤ 30, FC ≤ 5×D
When D ≥ 35, FC ≤ 3×D
E = 0 or E ≥ 2
Cannot be used together with WFC
Dh
8 to 181
20 to 402
503
　Misumi guide shaft, one end stepped with internal thread typeWFCAdditional flat machining at 2 locations
Ordering Code WFC8-A8-E4
Applicable conditions Not applicable for precision type
WFC, A, E = specified unit 1 mm
When D ≤ 30, WFC ≤ 5 × D
When D ≥ 35, WFC ≤ 3 × D
A(E) = 0 or A(E) ≥ 2
Cannot be machined on the same plane, cannot be used together with FC
Dh
8 to 181
20 to 402
503
　Misumi guide shaft, one end stepped with internal thread typeRCAdd one flat surface at a 90-degree position
Ordering Code RC10
Applicable conditions Applicable for D=10 to 30
Not suitable for precision type
Cannot be used together with WRC
Db1h
1060.5
12–201
2510
3012
　Misumi guide shaft, one end stepped with internal thread typeWRCAdd two flat surfaces at 90-degree positions
Ordering Code WRC10-Y10
Applicable conditions Applicable for D=10 to 30
Not suitable for precision type
Cannot be used together with RC
Cannot be machined on the same plane
Db1h
1060.5
12–201
2510
3012
Misumi guide shaft, one end stepped with internal thread typeMMC
MMS		Change external thread to fine thread
Ordering Code MMC14
(Change M to MMC)
MMS14
(Change M to MMS)
DMMCMMS
834568           
10 456810      10   
12  5681012     1012  
13  5681012     10   
15  568101215    1012  
16  568101215    101214 
18  56810121517   10121418
20   681012151720  10121418
25    8101215172025 10121418
30    81012151720253010121418
35     1012151720253010121418
40      121517202530 121418
50       1517202530  1418
Pitch0.350.50.7511.51.251.5
Misumi guide shaft, one end stepped with internal thread typeNSCChange the internal thread to a fine thread
Ordering Code NSC14
(Change N to NSC)
Applicable conditions Applicable for D ≥ 12
DNSC
12, 138    
15, 16810   
1881012  
208101214 
25–35810121418
40 10121418
50  121418
Pitch11.31.5
Misumi guide shaft, one end stepped with internal thread typeNDChange to internal thread effective length × 3
Ordering Code ND6 (change N to ND)
Applicable conditions D = 10–30, and N = 6–20 are applicable
Internal thread on one end: ND × 3.5 + 4 ≤ L
When selecting multiple additional machining operations, there must be a gap of at least 2 mm between the machined areas.
Additional processing may result in reduced hardness.
Specification Table
Part NumberSpecified unit: 1 mmM (Coarse thread)
Select		N (Coarse thread)
Select		(Y)
Max.
TypeDLF
Standard Type
(D Tolerance g7)
E-SAFD
E-SSAFD
E-PSAFD
E-PSSAFD
(D Tolerance f8)
E-PSAGD		825 to 10955 ≤ F ≤ M × 356       345        1100
1025–1195568      3456       1200
1225 to 139556810     (3)4568      1400
1325–13955681012    (3)4568      1400
1525–13955681012    (3)456810     1400
1625–13955681012     456810     1400
2025–1395568101216    45681012    1400
2525–13955681012162024  4568101216   1400
3025 to 1495 681012162024    6810121620  1500
3525–1492   101216202430    810121620  1500
4040–1490    1216202430     1012162024 1500
5050–1490     16202430      12162024301500
Outer diameters 35, 40, and 50 are only available for E-PSAFD specifications.
For the N() dimension, only D Tolerance g7 is available.
 
D Tolerance
Dg7f8
8-0.005
-0.020		-0.013
-0.035
10
12-0.006
-0.024		-0.016
-0.043
13
15
16
18
20-0.007
-0.028		-0.020
-0.053
25
30
35-0.009
-0.034		-
40
50
Product Features
Feature 1: Offers high-precision dimensional tolerances and is widely used in various precision equipment.
Feature 2: Uses high-frequency quenching on superior wear-resistant bearing steel (45 or GCr15) and SUS440C or equivalent high-hardness corrosion-resistant steel, enhancing wear resistance while maintaining original toughness.
Feature 3: Various additional processing options are available to meet different usage environments.
Feature 4: Typically used in combination with linear bearing products, it provides excellent linear guidance. Compared to standard shaft and bushing structures, even during high-speed reciprocating motion, there is minimal wear.
Feature 5: Hard chrome plating is available as a Surface Treatment, offering excellent rust resistance. The coating hardness reaches HV750, so it will not be easily worn even when used with high-hardness workpieces.
Precautions
MISUMI high-precision guide shafts with stepped ends and internal threads / stepped ends selection catalog(2) Reduced hardness in machined areas
 After quenching the base material, machining may cause reduced hardness due to annealing in the following areas:
- All external threads
- All steps
- Internal threads: When M ≥ D/2, double-hole internal threads, and hard chrome plated products made of SUS440C or other high-hardness corrosion-resistant steels
- Additional machining of wrench slots (SC-WSC-SX)
- Additional machining of flat surfaces (FC-WFC)
- Additional machining of V-grooves (VC-WVC)
- Except for fully hardened types.
Only the shaded area in section D is hard chrome plated.
Guide shaft double stepped internal thread type, double stepped bushing, MISUMI quality, Japanese imported stainless steel material		(3) Plating after Surface Treatment
 After Surface Treatment of the base material, machining is performed, and the following areas are not plated:
- Groove areas
 -External thread sections
 -Internal thread sections
 -Wrench slots, V-grooves, flat surfaces, and cut surfaces
 -The inside of pipe-type guide shafts is not hard chrome plated and may rust.
Example of Use
Standard Linear Motion MechanismFunctions of the Standard Linear Motion Mechanism
(1) Using two guide shafts in parallel effectively prevents the workpiece from rotating.
(2) Improves the accuracy of linear motion and load-bearing capacity.
(3) High-speed reciprocating motion can be achieved through the combination of guide shafts and linear bearings.
(4) Low running resistance, resulting in less wear on the corresponding workpiece.
Example Diagram
MISUMI guide shafts with stepped ends and internal threads / stepped ends selection guide
  
Actual Product PhotoFunctions of Key Components in the Mechanism
Linear guide shaft: Supports the workpiece and, when used with linear bearings, provides guiding functionality.
For details, click Linear Guide Shaft

Linear bushing: Uses a ball circulation structure to drive the workpiece along the guide shaft.
Click for details Linear Bushing

Guide shaft support: Supports and secures the guide shaft, effectively adjusts the shaft spacing, and improves the stability of the equipment.
Click for details Guide Shaft Support

Pusher: Serves as a limit, used to adjust the effective stroke of the mechanism
Click for details Pusher
Factory direct sales: large images of MISUMI guide shafts with stepped ends and internal threads / stepped ends
Application Industries
Medical Semiconductors Electronics and Electrical Appliances
MISUMI high-frequency hardened shaft double stepped internal thread type, double stepped type selection manufacturer MISUMI guide shaft with stepped ends and internal threads, stepped ends type product details and introduction Factory direct sale sliding linear shaft with stepped ends and internal threads, stepped ends type, MISUMI model
Smartphones Food Automotive
Linear shaft hardened shaft with stepped ends and internal threads, stepped ends type, custom drawing dimensions Chrome-plated shaft with stepped ends and internal threads / stepped ends – dimension drawings Special supply of linear shafts with stepped ends and internal threads / stepped ends – bearing steel, stainless steel, complete model selection
Related Products
Linear Bearing Standard Type, Straight Cylinder Type Bearing Housing Assembly T Type Retaining Ring Open Type
Processing of stainless steel hardened chrome-plated shafts with stepped ends and internal threads / stepped ends Sales of MISUMI linear shafts with stepped ends and internal threads / stepped ends – introduction to MISUMI guide shafts Selection and design of linear guide shaft assemblies with stepped ends and internal threads / stepped ends
Representative model: LMU6 Representative model: BGHFS6000ZZ-30 Representative model: PSCS10-10
Advantages: High quality, low price, short lead time Advantages: Complete range, high precision and high quality Advantages: Supporting shaft products, complete range
Related Documents
Corrosion resistance of metal materials and Surface Treatments Click Corrosion Resistance Table

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. Next >>
Part Number
E-PSAFD8-[25-1095/1]-F[5-18/1]-M[5,​6]-N[3,​4,​5]
E-PSAFD8-[25-1095/1]-F[5-18/1]-MMC6-N[3,​4,​5]
E-PSAFD10-[25-1195/1]-F[5-24/1]-M[5,​6,​8]-N[3,​4,​5,​6]
E-PSAFD10-[25-1195/1]-F[5-24/1]-M[5,​6,​8]-ND6
E-PSAFD10-[25-1195/1]-F[5-24/1]-MMC[6,​8]-N[3,​4,​5,​6]
E-PSAFD10-[25-1195/1]-F[5-24/1]-MMC[6,​8]-ND6
E-PSAFD12-[25-1395/1]-F[5-30/1]-M[5,​6,​8,​10]-N[3,​4,​5,​6,​8]
E-PSAFD12-[25-1395/1]-F[5-30/1]-M[5,​6,​8,​10]-ND[6,​8]
E-PSAFD12-[25-1395/1]-F[5-30/1]-M[5,​6,​8,​10]-NSC8
E-PSAFD12-[25-1395/1]-F[5-30/1]-MMC[6,​8,​10]-N[3,​4,​5,​6,​8]
E-PSAFD12-[25-1395/1]-F[5-30/1]-MMC[6,​8,​10]-ND[6,​8]
E-PSAFD12-[25-1395/1]-F[5-30/1]-MMC[6,​8,​10]-NSC8
E-PSAFD12-[25-1395/1]-F[5-30/1]-MMS10-N[3,​4,​5,​6,​8]
E-PSAFD12-[25-1395/1]-F[5-30/1]-MMS10-ND[6,​8]
E-PSAFD12-[25-1395/1]-F[5-30/1]-MMS10-NSC8
E-PSAFD13-[25-1395/1]-F[5-36/1]-M[5,​6,​8,​10,​12]-N[3,​4,​5,​6,​8]
E-PSAFD13-[25-1395/1]-F[5-36/1]-M[5,​6,​8,​10,​12]-ND[6,​8]
E-PSAFD13-[25-1395/1]-F[5-36/1]-M[5,​6,​8,​10,​12]-NSC8
E-PSAFD13-[25-1395/1]-F[5-36/1]-MMC[6,​8,​10]-N[3,​4,​5,​6,​8]
E-PSAFD13-[25-1395/1]-F[5-36/1]-MMC[6,​8,​10]-ND[6,​8]
E-PSAFD13-[25-1395/1]-F[5-36/1]-MMC[6,​8,​10]-NSC8
E-PSAFD13-[25-1395/1]-F[5-36/1]-MMS10-N[3,​4,​5,​6,​8]
E-PSAFD13-[25-1395/1]-F[5-36/1]-MMS10-ND[6,​8]
E-PSAFD13-[25-1395/1]-F[5-36/1]-MMS10-NSC8
E-PSAFD15-[25-1395/1]-F[5-36/1]-M[5,​6,​8,​10,​12]-N[3,​4,​5,​6,​8,​10]
E-PSAFD15-[25-1395/1]-F[5-36/1]-M[5,​6,​8,​10,​12]-ND[6,​8,​10]
E-PSAFD15-[25-1395/1]-F[5-36/1]-M[5,​6,​8,​10,​12]-NSC[8,​10]
E-PSAFD15-[25-1395/1]-F[5-36/1]-MMC[6,​8,​10,​12]-N[3,​4,​5,​6,​8,​10]
E-PSAFD15-[25-1395/1]-F[5-36/1]-MMC[6,​8,​10,​12]-ND[6,​8,​10]
E-PSAFD15-[25-1395/1]-F[5-36/1]-MMC[6,​8,​10,​12]-NSC[8,​10]
E-PSAFD15-[25-1395/1]-F[5-36/1]-MMS[10,​12]-N[3,​4,​5,​6,​8,​10]
E-PSAFD15-[25-1395/1]-F[5-36/1]-MMS[10,​12]-ND[6,​8,​10]
E-PSAFD15-[25-1395/1]-F[5-36/1]-MMS[10,​12]-NSC[8,​10]
E-PSAFD16-[25-1395/1]-F[5-36/1]-M[5,​6,​8,​10,​12]-N[4,​5,​6,​8,​10]
E-PSAFD16-[25-1395/1]-F[5-36/1]-M[5,​6,​8,​10,​12]-ND[6,​8,​10]
E-PSAFD16-[25-1395/1]-F[5-36/1]-M[5,​6,​8,​10,​12]-NSC[8,​10]
E-PSAFD16-[25-1395/1]-F[5-36/1]-MMC[6,​8,​10,​12]-N[4,​5,​6,​8,​10]
E-PSAFD16-[25-1395/1]-F[5-36/1]-MMC[6,​8,​10,​12]-ND[6,​8,​10]
E-PSAFD16-[25-1395/1]-F[5-36/1]-MMC[6,​8,​10,​12]-NSC[8,​10]
E-PSAFD16-[25-1395/1]-F[5-36/1]-MMS[10,​12,​14]-N[4,​5,​6,​8,​10]
E-PSAFD16-[25-1395/1]-F[5-36/1]-MMS[10,​12,​14]-ND[6,​8,​10]
E-PSAFD16-[25-1395/1]-F[5-36/1]-MMS[10,​12,​14]-NSC[8,​10]
E-PSAFD20-[25-1395/1]-F[5-48/1]-M[5,​6,​8,​10,​12,​16]-N[4,​5,​6,​8,​10,​12]
E-PSAFD20-[25-1395/1]-F[5-48/1]-M[5,​6,​8,​10,​12,​16]-ND[6,​8,​10,​12]
E-PSAFD20-[25-1395/1]-F[5-48/1]-M[5,​6,​8,​10,​12,​16]-NSC[8,​10,​12,​14]
E-PSAFD20-[25-1395/1]-F[5-48/1]-MMC[6,​8,​10,​12,​15,​17]-N[4,​5,​6,​8,​10,​12]
E-PSAFD20-[25-1395/1]-F[5-48/1]-MMC[6,​8,​10,​12,​15,​17]-ND[6,​8,​10,​12]
E-PSAFD20-[25-1395/1]-F[5-48/1]-MMC[6,​8,​10,​12,​15,​17]-NSC[8,​10,​12,​14]
E-PSAFD20-[25-1395/1]-F[5-48/1]-MMS[10,​12,​14,​18]-N[4,​5,​6,​8,​10,​12]
E-PSAFD20-[25-1395/1]-F[5-48/1]-MMS[10,​12,​14,​18]-ND[6,​8,​10,​12]
E-PSAFD20-[25-1395/1]-F[5-48/1]-MMS[10,​12,​14,​18]-NSC[8,​10,​12,​14]
E-PSAFD25-[25-1395/1]-F[7-72/1]-M[5,​6,​8,​10,​12,​16,​20,​24]-N[4,​5,​6,​8,​10,​12,​16]
E-PSAFD25-[25-1395/1]-F[7-72/1]-M[5,​6,​8,​10,​12,​16,​20,​24]-ND[6,​8,​10,​12,​16]
E-PSAFD25-[25-1395/1]-F[7-72/1]-M[5,​6,​8,​10,​12,​16,​20,​24]-NSC[8,​10,​12,​14,​18]
E-PSAFD25-[25-1395/1]-F[7-72/1]-MMC[8,​10,​12,​15,​17,​20]-N[4,​5,​6,​8,​10,​12,​16]
E-PSAFD25-[25-1395/1]-F[7-72/1]-MMC[8,​10,​12,​15,​17,​20]-ND[6,​8,​10,​12,​16]
E-PSAFD25-[25-1395/1]-F[7-72/1]-MMC[8,​10,​12,​15,​17,​20]-NSC[8,​10,​12,​14,​18]
E-PSAFD25-[25-1395/1]-F[7-72/1]-MMS[10,​12,​14,​18]-N[4,​5,​6,​8,​10,​12,​16]
E-PSAFD25-[25-1395/1]-F[7-72/1]-MMS[10,​12,​14,​18]-ND[6,​8,​10,​12,​16]
E-PSAFD25-[25-1395/1]-F[7-72/1]-MMS[10,​12,​14,​18]-NSC[8,​10,​12,​14,​18]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipMaterial Heat Treatment Surface Treatment Shaft Dia. D
(Ø) 		Length L
(mm) 		Shaft Fit Tolerance F
(mm) 		Change internal thread to fine thread [NSC]
(mm) 		External Thread M (Coarse Thread)
(mm) 		Change external thread to fine thread [MMC]
(mm) 		Change external thread to fine thread [MMS]
(mm) 		Internal Thread N (Coarse Thread)
(mm) 		ND Female Thread M
(mm)

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating825 ～ 1095g75 ～ 18-6--3 ～ 4-5

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating825 ～ 1095g75 ～ 18--6-3 ～ 4--

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1025 ～ 1195g75 ～ 24-6 ～ 8--3 ～ 6-5

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1025 ～ 1195g75 ～ 24-6 ～ 8---65

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1025 ～ 1195g75 ～ 24--6 ～ 8-3 ～ 6--

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1025 ～ 1195g75 ～ 24--6 ～ 8--6-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1225 ～ 1395g75 ～ 30-6 ～ 8--3 ～ 6-5

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1225 ～ 1395g75 ～ 30-6 ～ 8---65

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1225 ～ 1395g75 ～ 3086 ～ 8----5

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1225 ～ 1395g75 ～ 30--6 ～ 8-3 ～ 6--

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1225 ～ 1395g75 ～ 30--6 ～ 8--6-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1225 ～ 1395g75 ～ 308-6 ～ 8----

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1225 ～ 1395g75 ～ 30---103 ～ 6--

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1225 ～ 1395g75 ～ 30---10-6-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1225 ～ 1395g75 ～ 308--10---

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1325 ～ 1395g75 ～ 36-6 ～ 8--3 ～ 6-5

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1325 ～ 1395g75 ～ 36-6 ～ 8---65

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1325 ～ 1395g75 ～ 3686 ～ 8----5

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1325 ～ 1395g75 ～ 36--6 ～ 8-3 ～ 6--

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1325 ～ 1395g75 ～ 36--6 ～ 8--6-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1325 ～ 1395g75 ～ 368-6 ～ 8----

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1325 ～ 1395g75 ～ 36---103 ～ 6--

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1325 ～ 1395g75 ～ 36---10-6-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1325 ～ 1395g75 ～ 368--10---

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1525 ～ 1395g75 ～ 36-6 ～ 8--3 ～ 6-5

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1525 ～ 1395g75 ～ 36-6 ～ 8---65

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1525 ～ 1395g75 ～ 3686 ～ 8----5

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1525 ～ 1395g75 ～ 36--6 ～ 8-3 ～ 6--

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1525 ～ 1395g75 ～ 36--6 ～ 8--6-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1525 ～ 1395g75 ～ 368-6 ～ 8----

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1525 ～ 1395g75 ～ 36---103 ～ 6--

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1525 ～ 1395g75 ～ 36---10-6-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1525 ～ 1395g75 ～ 368--10---

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1625 ～ 1395g75 ～ 36-6 ～ 8--4 ～ 6-5

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1625 ～ 1395g75 ～ 36-6 ～ 8---65

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1625 ～ 1395g75 ～ 3686 ～ 8----5

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1625 ～ 1395g75 ～ 36--6 ～ 8-4 ～ 6--

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1625 ～ 1395g75 ～ 36--6 ～ 8--6-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1625 ～ 1395g75 ～ 368-6 ～ 8----

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1625 ～ 1395g75 ～ 36---104 ～ 6--

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1625 ～ 1395g75 ～ 36---10-6-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating1625 ～ 1395g75 ～ 368--10---

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating2025 ～ 1395g75 ～ 48-6 ～ 8--4 ～ 6-5

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating2025 ～ 1395g75 ～ 48-6 ～ 8---65

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating2025 ～ 1395g75 ～ 4886 ～ 8----5

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating2025 ～ 1395g75 ～ 48--6 ～ 8-4 ～ 6--

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating2025 ～ 1395g75 ～ 48--6 ～ 8--6-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating2025 ～ 1395g75 ～ 488-6 ～ 8----

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating2025 ～ 1395g75 ～ 48---104 ～ 6--

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating2025 ～ 1395g75 ～ 48---10-6-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating2025 ～ 1395g75 ～ 488--10---

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating2525 ～ 1395g77 ～ 72-6 ～ 8--4 ～ 16-5 ～ 24

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating2525 ～ 1395g77 ～ 72-6 ～ 8---65 ～ 24

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating2525 ～ 1395g77 ～ 7286 ～ 8----5 ～ 24

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating2525 ～ 1395g77 ～ 72--8-4 ～ 16--

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating2525 ～ 1395g77 ～ 72--8--6-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating2525 ～ 1395g77 ～ 728-8----

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating2525 ～ 1395g77 ～ 72---104 ～ 16--

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating2525 ～ 1395g77 ～ 72---10-6-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Induction HardenedHard Chrome Plating2525 ～ 1395g77 ～ 728--10---

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. Next >>

Basic Information

Basic Shape Solid End Shape (Left) Threaded End Shape (Right) Tapped
Shaft End Perpendicularity Perpendicularity (0.2) Precision Standard Fastening Tool Type No

Configure

Clear All

210 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Heat Treatment

    • Not Provided
    • Induction Hardened

    Clear

  • Surface Treatment

    • Not Provided
    • Hard Chrome Plating

    Clear

  • Shaft Dia. D(Ø)

    • 8
    • 10
    • 12
    • 13
    • 15
    • 16
    • 20
    • 25
    • 30
    • 35
    • 40
    • 50

    Clear

  • Length L(mm)

     [25-1495/1mm Unit(s)]

    Clear

  • Shaft Fit Tolerance

    • f8
    • g7

    Clear

  • F(mm)

     [5-90/1mm Unit(s)]

    Clear

  • Change internal thread to fine thread [NSC](mm)

    • 8
    • 10
    • 12
    • 14
    • 18

    Clear

  • External Thread M (Coarse Thread)(mm)

    • 6
    • 8
    • 10
    • 12
    • 16
    • 20
    • 24

    Clear

  • Change external thread to fine thread [MMC](mm)

    • 6
    • 8
    • 10
    • 12
    • 15
    • 17
    • 20
    • 25

    Clear

  • Change external thread to fine thread [MMS](mm)

    • 10
    • 12
    • 14
    • 18

    Clear

  • Internal Thread N (Coarse Thread)(mm)

    • 3
    • 4
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Clear

  • ND

    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Clear

  • Female Thread M(mm)

    • 5
    • 20
    • 24

    Clear

  • type

    • E-PSAFD
    • E-PSAGD
    • E-PSSAFD
    • E-SAFD
    • E-SSAFD

    Clear

  • Material

    • Steel
      • S45C
      • S45C or GCr15
    • Stainless Steel
      • SUS440C or Equivalent

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 7 Day(s) or Less
    • 10 Day(s) or Less

    Clear

Specify Alterations

Additional Products in this Category

Tech Support

Technical Inquiry

Payment Method

more
  • Credit Card
    • VISA
    • MasterCard
  • Bank Transfer
    • FPX
    • Interbank GIRO (IBG)

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm,    9am – 1pm(Sat) * Order cut-off time is 12pm

  • Tel: (60) 3 7890 6399
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.