(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Loading

  • [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Linear Shafts One End Stepped and Tapped with Wrench Flats

Linear Shafts One End Stepped and Tapped with Wrench Flats

MISUMI

MiSUMi Economy

MISUMI

This is an economy item, The price is cheaper than the MISUMI standard product.

Part Number

Configured Part Number is shown.

Product Overview
The linear guide shaft is a high-precision shaft product that can be used in combination with linear bearings and other bushing-type products. It not only offers excellent wear resistance, but also provides a variety of additional processing options.
Dimensional Drawing
MISUMI guide shaft with stepped end, internal thread, and wrench slot type product introduction
Material Specifications
Type Material Hardness Surface TreatmentD (mm)L (mm)
Standard Type
D Tolerance g7
E-SFPG45 or GCr15High-frequency quenching
Effective hardened layer depth
Please click Surface Hardness Reference
45 or GCr15 55HRC~
SUS440C or equivalent high-hardness corrosion-resistant steel 53HRC or more		-8 to 3025 to 1498
E-SSFPGSUS440C or equivalent high-hardness corrosion-resistant steel
E-PSFPG45 or GCr15Hard chrome plating
Plating hardness HV750~
Plating thickness 3µ or more
E-PSSFPGSUS440C or equivalent high-hardness corrosion-resistant steel
The machined part at the shaft end (effective thread length + approx. 10 mm) may have reduced hardness due to the annealing effect of machining.
If rust prevention is required, please give priority to products with hard chrome plating Surface Treatment. Please click Rust Prevention Methods
If used together with linear bearings, please choose products with high-frequency quenching.
 
Specification Overview
■ Tolerance of section D
Dg7
8-0.005
-0.020
10
12-0.006
-0.024
13
15
16
18
20-0.007
-0.028
25
30
35-0.009
-0.034
40
50
Specification Table
Part NumberSpecified unit: 1 mmM (Coarse thread)
Select		Wrench Slot Size(Y)
Max.
TypeDLFPSCWℓ1
Standard Type
(D Tolerance g7)
E-SFPG
E-SSFPG
E-PSFPG
E-PSSFPG		825–10988 ≤ D ≤ 30
2 ≤ F ≤ P×5

D ≥ 35
2 ≤ F ≤ P×4		63          SC = specified unit 1 mm

SC +ℓ1 ≤ L
SC ≥ 0

Wrench slot details
>>See (PDF)		781100
1025–11986–8345        81200
1225–13986–103456       10101400
1325–13986–1134568      111400
1525–13986–133456810     131400
1625–13986–143456810     141400
2025–13987–17 45681012    171400
2525–13987–22 4568101216   221400
3025–14988–27  5681012162024 27151500
3525–14989–32  56810121620  301500
4025–149811–37   681012162024 36201500
5025–149811–47   68101216202430411500
Outer diameters 35, 40, and 50 are only available for E-PSFPG specifications.
Alterations
AlterationsCodeSpec.
MISUMI guide shaft with stepped end, internal thread, and wrench slot type product introductionLKCChange L dimension tolerance.
Ordering Code LKC
L<200 → L±0.03
When using LKC, the specified unit for the L dimension can be 0.1 mm
MISUMI guide shaft with stepped end, internal thread, and wrench slot type product introductionFCAdd surface machining at 1 location
Ordering Code FC10-E8
For FC, E = specified unit 1 mm
When D ≤ 30, FC ≤ 5×D
When D ≥ 35, FC ≤ 3 × D
E = 0 or E ≥ 2
Cannot be used together with WFC
Dh
8 to 161
20 to 302
MISUMI guide shaft with stepped end, internal thread, and wrench slot type product introductionWFCAdditional planar machining at 2 locations
Ordering Code WFC10-A8-E20
WFC, A, E = specified unit 1 mm
When D ≤ 30, WFC ≤ 5 × D
When D ≥ 35, WFC ≤ 3 × D
A(E) = 0 or A(E) ≥ 2
Cannot be machined on the same plane and cannot be used together with FC
Dh
8 to 161
20 to 302
　Misumi guide shaft, one end stepped with internal thread typeRCAdditional flat machining at one 90-degree position
Ordering Code RC10
Applicable conditions Applicable for D=10 to 30
RC = specified in 1 mm increments
RC + b1 ≤ L
RC ≥ 2
Cannot be used together with WRC
Db1h
1060.5
12–201
2510
3012
　Misumi guide shaft, one end stepped with internal thread typeWRCAdd flat machining at two 90-degree positions
Ordering Code WRC10-Y10
Applicable conditions Applicable for D=10 to 30
Cannot be used together with RC
Cannot be machined on the same plane
Db1h
1060.5
12–201
2510
3012
　MISUMI guide shaft with stepped end, internal thread, and wrench slot type product introductionSXAdd a second wrench slot machining.
Ordering Code SX15
SX = specified unit 1 mm
SC + SX + ℓ1 × 2 < L
SX ≥ 0
Applicable conditions Applicable for D ≥ 6, only available for types with wrench slots
Cannot be machined on the same plane, cannot be used together with WSC
DWℓ1
658
87
108
121010
1311
1513
1614
DWℓ1
181610
2017
2522
302715
3530
403620
5041
　MISUMI guide shaft with stepped end, internal thread, and wrench slot type product introductionLFCFlat machining on the stepped section
Ordering Code LFC10-A0
LFC ≤ F
D-M(N) ≥ 1
PH
6 to 181
20 to 402
41 or more2
　MISUMI guide shaft with stepped end, internal thread, and wrench slot type product introductionMDChange the effective length of the internal thread section to M×3.
Ordering Code MD6 (change M to MD)
Applicable conditions D = 12 to 30, and applicable for M = 6 to 20
Internal thread on one end: MD×3.5+4 ≤ L
KCKCAdd an additional keyway
Ordering Code KC10-G10
KC, G = specified unit 1 mm
b ≤ G ≤ 30, G ≤ L/3
L>500: 2 ≤ KC ≤ L/3
L<500: 2 ≤ KC ≤ 500
M×2<KC+F
Only applicable for D = 12, 16, 20, 25, 30
Internal thread section (M×2.5+4) is not applicable for this additional machining.		MISUMI linear guide shaft with retaining ring groove, steering shaft, linear shaft, chrome-plated rod
 
Shaft diameterbtr
Nominal dimensionPermissible tolerance (N9)Nominal dimensionPermissible tolerance
1240
-0.03		2.5+0.1
0		0.08 to 0.16
16530.16 to 0.25
2063.5
2580
-0.036		4+0.2
0
30

When KC and WKC = 0, the keyway shape is as shown below.
tu

When KC + G ≥ L, the keyway shape is as shown below.
tu
WKCWKCAdd two additional keyways
Ordering Code KC10-G10-WKC10-C8
KC, WKC, G, C = specified unit 1 mm
b ≤ G(C) ≤ 30, G(C) ≤ L/3
L > 500: 2 ≤ KC(WKC) ≤ L/3
L < 500: 2 ≤ KC(WKC) ≤ 500
G + C ≤ L/3
M×2 < KC + F
Only applicable for D = 12, 16, 20, 25, 30
Cannot be machined on the same plane
Internal thread section (M×2.5+4) is not applicable for this additional machining.
When selecting multiple additional machining operations, there must be a gap of at least 2 mm between the machined areas.
Additional machining may result in reduced hardness. Please refer to P.36
Product Features
Feature 1: Offers high-precision dimensional tolerances and is widely used in various precision equipment.
Feature 2: Uses bearing steel with excellent wear resistance (45 or GCr15) and SUS440C or equivalent high-hardness, corrosion-resistant steel, which undergo high-frequency quenching to enhance wear resistance while maintaining original toughness.
Feature 3: Various additional processing options are available to meet different usage environments.
Feature 4: Typically used in combination with linear bearing products, it provides excellent linear guidance. Compared to standard shaft and bushing structures, even during high-speed reciprocating motion, there is minimal wear.
Feature 5: Hard chrome plating is available as a Surface Treatment, offering excellent rust resistance. The coating hardness reaches HV750, so it will not be easily worn even when used with high-hardness workpieces.
Precautions
MISUMI high-precision guide shafts with stepped ends and internal threads / stepped ends selection catalog(2) Reduced hardness in machined areas
 After quenching the base material, machining may cause reduced hardness due to annealing in the following areas:
- All external threads
- All steps
- Internal threads: When M ≥ D/2, double-hole internal threads, and hard chrome plated products made of SUS440C or other high-hardness corrosion-resistant steels
- Additional machining of wrench slots (SC-WSC-SX)
- Additional machining of flat surfaces (FC-WFC)
- Additional machining of V-grooves (VC-WVC)
- Except for fully hardened types.
Only the shaded area in section D is hard chrome plated.
Guide shaft double stepped internal thread type, double stepped bushing, MISUMI quality, Japanese imported stainless steel material		(3) Plating after Surface Treatment
 After Surface Treatment of the base material, machining is performed, and the following areas are not plated:
- Groove areas
 -External thread sections
 -Internal thread sections
 -Wrench slots, V-grooves, flat surfaces, and cut surfaces
 -The inside of pipe-type guide shafts is not hard chrome plated and may rust.
Example of Use
Standard Linear Motion MechanismFunctions of the Standard Linear Motion Mechanism
(1) Using two guide shafts in parallel effectively prevents the workpiece from rotating.
(2) Improves the accuracy of linear motion and load-bearing capacity.
(3) High-speed reciprocating motion can be achieved through the combination of guide shafts and linear bearings.
(4) Low running resistance, resulting in less wear on the corresponding workpiece.
Example Diagram
MISUMI guide shafts with stepped ends and internal threads / stepped ends selection guide
  
Actual Product PhotoFunctions of Key Components in the Mechanism
Linear guide shaft: Supports the workpiece and, when used with linear bearings, provides guiding functionality.
For details, click Linear Guide Shaft

Linear bushing: Uses a ball circulation structure to drive the workpiece along the guide shaft.
Click for details Linear Bushing

Guide shaft support: Supports and secures the guide shaft, effectively adjusts the shaft spacing, and improves the stability of the equipment.
Click for details Guide Shaft Support

Pusher: Serves as a limit, used to adjust the effective stroke of the mechanism
Click for details Pusher
Factory direct sales: large images of MISUMI guide shafts with stepped ends and internal threads / stepped ends
Application Industries
Medical Semiconductors Electronics and Electrical Appliances
MISUMI high-frequency hardened shaft double stepped internal thread type, double stepped type selection manufacturer MISUMI guide shaft with stepped ends and internal threads, stepped ends type product details and introduction Factory direct sale sliding linear shaft with stepped ends and internal threads, stepped ends type, MISUMI model
Smartphones Food Automotive
Linear shaft hardened shaft with stepped ends and internal threads, stepped ends type, custom drawing dimensions Chrome-plated shaft with stepped ends and internal threads / stepped ends – dimension drawings Special supply of linear shafts with stepped ends and internal threads / stepped ends – bearing steel, stainless steel, complete model selection
Related Products
Linear Bearing Standard Type, Straight Cylinder Type Bearing Housing Assembly T Type Retaining Ring Open Type
Processing of stainless steel hardened chrome-plated shafts with stepped ends and internal threads / stepped ends Sales of MISUMI linear shafts with stepped ends and internal threads / stepped ends – introduction to MISUMI guide shafts Selection and design of linear guide shaft assemblies with stepped ends and internal threads / stepped ends
Representative model: LMU6 Representative model: BGHFS6000ZZ-30 Representative model: PSCS10-10
Advantages: High quality, low price, short lead time Advantages: Complete range, high precision and high quality Advantages: Supporting shaft products, complete range
Related Documents
Corrosion resistance of metal materials and Surface Treatments Click Corrosion Resistance Table

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
E-PSFPG8-[25-1098/1]-F[2-24/1]-P6-M3-SC[0-1090/1]
E-PSFPG10-[25-1198/1]-F[2-32/1]-P[6,​7,​8]-M[3,​4,​5]-SC[0-1190/1]
E-PSFPG12-[25-1398/1]-F[2-40/1]-P[6-10/1]-M[3,​4,​5,​6]-SC[0-1388/1]
E-PSFPG12-[25-1398/1]-F[2-40/1]-P[6-10/1]-MD6-SC[0-1388/1]
E-PSFPG13-[25-1398/1]-F[2-52/1]-P[6-11/1]-M[3,​4,​5,​6,​8]-SC[0-1388/1]
E-PSFPG13-[25-1398/1]-F[2-52/1]-P[6-11/1]-MD[6,​8]-SC[0-1388/1]
E-PSFPG15-[25-1398/1]-F[2-52/1]-P[6-13/1]-M[3,​4,​5,​6,​8,​10]-SC[0-1388/1]
E-PSFPG15-[25-1398/1]-F[2-52/1]-P[6-13/1]-MD[6,​8,​10]-SC[0-1388/1]
E-PSFPG16-[25-1398/1]-F[2-56/1]-P[6-14/1]-M[3,​4,​5,​6,​8,​10]-SC[0-1388/1]
E-PSFPG16-[25-1398/1]-F[2-56/1]-P[6-14/1]-MD[6,​8,​10]-SC[0-1388/1]
E-PSFPG20-[25-1398/1]-F[2-68/1]-P[7-17/1]-M[4,​5,​6,​8,​10,​12]-SC[0-1388/1]
E-PSFPG20-[25-1398/1]-F[2-68/1]-P[7-17/1]-MD[6,​8,​10,​12]-SC[0-1388/1]
E-PSFPG25-[25-1398/1]-F[2-88/1]-P[7-22/1]-M[4,​5,​6,​8,​10,​12,​16]-SC[0-1388/1]
E-PSFPG25-[25-1398/1]-F[2-88/1]-P[7-22/1]-MD[6,​8,​10,​12,​16]-SC[0-1388/1]
E-PSFPG30-[25-1498/1]-F[2-108/1]-P[9-27/1]-M[5,​6,​8,​10,​12,​16,​20,​24]-SC[0-1498/1]
E-PSFPG30-[25-1498/1]-F[2-108/1]-P[9-27/1]-MD[6,​8,​10,​12,​16,​20]-SC[0-1498/1]
E-PSFPG35-[25-1498/1]-F[2-128/1]-P[9-32/1]-M[5,​6,​8,​10,​12,​16,​20]-SC[0-1483/1]
E-PSFPG40-[25-1498/1]-F[2-148/1]-P[11-37/1]-M[6,​8,​10,​12,​16,​20,​24]-SC[0-1478/1]
E-PSFPG50-[25-1498/1]-F[2-188/1]-P[11-47/1]-M[6,​8,​10,​12,​16,​20,​24,​30]-SC[0-1478/1]
E-PSSFPG8-[25-1098/1]-F[2-24/1]-P6-M3-SC[0-1090/1]
E-PSSFPG10-[25-1198/1]-F[2-32/1]-P[6,​7,​8]-M[3,​4,​5]-SC[0-1190/1]
E-PSSFPG12-[25-1398/1]-F[2-40/1]-P[6-10/1]-M[3,​4,​5,​6]-SC[0-1388/1]
E-PSSFPG12-[25-1398/1]-F[2-40/1]-P[6-10/1]-MD6-SC[0-1388/1]
E-PSSFPG13-[25-1398/1]-F[2-52/1]-P[6-11/1]-M[3,​4,​5,​6,​8]-SC[0-1388/1]
E-PSSFPG13-[25-1398/1]-F[2-52/1]-P[6-11/1]-MD[6,​8]-SC[0-1388/1]
E-PSSFPG15-[25-1398/1]-F[2-52/1]-P[6-13/1]-M[3,​4,​5,​6,​8,​10]-SC[0-1388/1]
E-PSSFPG15-[25-1398/1]-F[2-52/1]-P[6-13/1]-MD[6,​8,​10]-SC[0-1388/1]
E-PSSFPG16-[25-1398/1]-F[2-56/1]-P[6-14/1]-M[3,​4,​5,​6,​8,​10]-SC[0-1388/1]
E-PSSFPG16-[25-1398/1]-F[2-56/1]-P[6-14/1]-MD[6,​8,​10]-SC[0-1388/1]
E-PSSFPG20-[25-1398/1]-F[2-68/1]-P[7-17/1]-M[4,​5,​6,​8,​10,​12]-SC[0-1388/1]
E-PSSFPG20-[25-1398/1]-F[2-68/1]-P[7-17/1]-MD[6,​8,​10,​12]-SC[0-1388/1]
E-PSSFPG25-[25-1398/1]-F[2-88/1]-P[7-22/1]-M[4,​5,​6,​8,​10,​12,​16]-SC[0-1388/1]
E-PSSFPG25-[25-1398/1]-F[2-88/1]-P[7-22/1]-MD[6,​8,​10,​12,​16]-SC[0-1388/1]
E-PSSFPG30-[25-1498/1]-F[2-108/1]-P[9-27/1]-M[5,​6,​8,​10,​12,​16,​20,​24]-SC[0-1498/1]
E-PSSFPG30-[25-1498/1]-F[2-108/1]-P[9-27/1]-MD[6,​8,​10,​12,​16,​20]-SC[0-1498/1]
E-SFPG8-[25-1098/1]-F[2-24/1]-P6-M3-SC[0-1090/1]
E-SFPG10-[25-1198/1]-F[2-32/1]-P[6,​7,​8]-M[3,​4,​5]-SC[0-1190/1]
E-SFPG12-[25-1398/1]-F[2-40/1]-P[6-10/1]-M[3,​4,​5,​6]-SC[0-1388/1]
E-SFPG12-[25-1398/1]-F[2-40/1]-P[6-10/1]-MD6-SC[0-1388/1]
E-SFPG13-[25-1398/1]-F[2-52/1]-P[6-11/1]-M[3,​4,​5,​6,​8]-SC[0-1388/1]
E-SFPG13-[25-1398/1]-F[2-52/1]-P[6-11/1]-MD[6,​8]-SC[0-1388/1]
E-SFPG15-[25-1398/1]-F[2-52/1]-P[6-13/1]-M[3,​4,​5,​6,​8,​10]-SC[0-1388/1]
E-SFPG15-[25-1398/1]-F[2-52/1]-P[6-13/1]-MD[6,​8,​10]-SC[0-1388/1]
E-SFPG16-[25-1398/1]-F[2-56/1]-P[6-14/1]-M[3,​4,​5,​6,​8,​10]-SC[0-1388/1]
E-SFPG16-[25-1398/1]-F[2-56/1]-P[6-14/1]-MD[6,​8,​10]-SC[0-1388/1]
E-SFPG20-[25-1398/1]-F[2-68/1]-P[7-17/1]-M[4,​5,​6,​8,​10,​12]-SC[0-1388/1]
E-SFPG20-[25-1398/1]-F[2-68/1]-P[7-17/1]-MD[6,​8,​10,​12]-SC[0-1388/1]
E-SFPG25-[25-1398/1]-F[2-88/1]-P[7-22/1]-M[4,​5,​6,​8,​10,​12,​16]-SC[0-1388/1]
E-SFPG25-[25-1398/1]-F[2-88/1]-P[7-22/1]-MD[6,​8,​10,​12,​16]-SC[0-1388/1]
E-SFPG30-[25-1498/1]-F[2-108/1]-P[9-27/1]-M[5,​6,​8,​10,​12,​16,​20,​24]-SC[0-1498/1]
E-SFPG30-[25-1498/1]-F[2-108/1]-P[9-27/1]-MD[6,​8,​10,​12,​16,​20]-SC[0-1498/1]
E-SSFPG8-[25-1098/1]-F[2-24/1]-P6-M3-SC[0-1090/1]
E-SSFPG10-[25-1198/1]-F[2-32/1]-P[6,​7,​8]-M[3,​4,​5]-SC[0-1190/1]
E-SSFPG12-[25-1398/1]-F[2-40/1]-P[6-10/1]-M[3,​4,​5,​6]-SC[0-1388/1]
E-SSFPG12-[25-1398/1]-F[2-40/1]-P[6-10/1]-MD6-SC[0-1388/1]
E-SSFPG13-[25-1398/1]-F[2-52/1]-P[6-11/1]-M[3,​4,​5,​6,​8]-SC[0-1388/1]
E-SSFPG13-[25-1398/1]-F[2-52/1]-P[6-11/1]-MD[6,​8]-SC[0-1388/1]
E-SSFPG15-[25-1398/1]-F[2-52/1]-P[6-13/1]-M[3,​4,​5,​6,​8,​10]-SC[0-1388/1]
E-SSFPG15-[25-1398/1]-F[2-52/1]-P[6-13/1]-MD[6,​8,​10]-SC[0-1388/1]
E-SSFPG16-[25-1398/1]-F[2-56/1]-P[6-14/1]-M[3,​4,​5,​6,​8,​10]-SC[0-1388/1]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipMaterial Surface Treatment Shaft Dia. D
(Ø) 		Length L
(mm) 		F
(mm) 		SC
(mm) 		M
(mm) 		Thread M (Coarse Thread)
(mm) 		P
(mm) 		MD

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Hard Chrome Plating825 ～ 10982 ～ 240 ～ 10903-6-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Hard Chrome Plating1025 ～ 11982 ～ 320 ～ 11903 ～ 456-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Hard Chrome Plating1225 ～ 13982 ～ 400 ～ 13883 ～ 456 ～ 10-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Hard Chrome Plating1225 ～ 13982 ～ 400 ～ 1388--6 ～ 106

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Hard Chrome Plating1325 ～ 13982 ～ 520 ～ 13883 ～ 456 ～ 11-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Hard Chrome Plating1325 ～ 13982 ～ 520 ～ 1388--6 ～ 116

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Hard Chrome Plating1525 ～ 13982 ～ 520 ～ 13883 ～ 456 ～ 13-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Hard Chrome Plating1525 ～ 13982 ～ 520 ～ 1388--6 ～ 136

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Hard Chrome Plating1625 ～ 13982 ～ 560 ～ 13883 ～ 456 ～ 14-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Hard Chrome Plating1625 ～ 13982 ～ 560 ～ 1388--6 ～ 146

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Hard Chrome Plating2025 ～ 13982 ～ 680 ～ 1388457 ～ 17-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Hard Chrome Plating2025 ～ 13982 ～ 680 ～ 1388--7 ～ 176

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Hard Chrome Plating2525 ～ 13982 ～ 880 ～ 13884 ～ 1657 ～ 22-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Hard Chrome Plating2525 ～ 13982 ～ 880 ～ 1388--7 ～ 226

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Hard Chrome Plating3025 ～ 14982 ～ 1080 ～ 1498-5 ～ 249 ～ 27-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Hard Chrome Plating3025 ～ 14982 ～ 1080 ～ 1498--9 ～ 276 ～ 20

-

1 Piece(s) 10 Day(s) [Steel] S45C or GCr15Hard Chrome Plating3525 ～ 14982 ～ 1280 ～ 1483165 ～ 209 ～ 32-

-

1 Piece(s) 10 Day(s) [Steel] S45C or GCr15Hard Chrome Plating4025 ～ 14982 ～ 1480 ～ 1478162011 ～ 37-

-

1 Piece(s) 10 Day(s) [Steel] S45C or GCr15Hard Chrome Plating5025 ～ 14982 ～ 1880 ～ 1478162011 ～ 47-

-

1 Piece(s) 7 Day(s) [Steel] S45CHard Chrome Plating825 ～ 10982 ～ 240 ～ 10903-6-

-

1 Piece(s) 7 Day(s) [Steel] S45CHard Chrome Plating1025 ～ 11982 ～ 320 ～ 11903 ～ 456-

-

1 Piece(s) 7 Day(s) [Steel] S45CHard Chrome Plating1225 ～ 13982 ～ 400 ～ 13883 ～ 456 ～ 10-

-

1 Piece(s) 7 Day(s) [Steel] S45CHard Chrome Plating1225 ～ 13982 ～ 400 ～ 1388--6 ～ 106

-

1 Piece(s) 7 Day(s) [Steel] S45CHard Chrome Plating1325 ～ 13982 ～ 520 ～ 13883 ～ 456 ～ 11-

-

1 Piece(s) 7 Day(s) [Steel] S45CHard Chrome Plating1325 ～ 13982 ～ 520 ～ 1388--6 ～ 116

-

1 Piece(s) 7 Day(s) [Steel] S45CHard Chrome Plating1525 ～ 13982 ～ 520 ～ 13883 ～ 456 ～ 13-

-

1 Piece(s) 7 Day(s) [Steel] S45CHard Chrome Plating1525 ～ 13982 ～ 520 ～ 1388--6 ～ 136

-

1 Piece(s) 7 Day(s) [Steel] S45CHard Chrome Plating1625 ～ 13982 ～ 560 ～ 13883 ～ 456 ～ 14-

-

1 Piece(s) 7 Day(s) [Steel] S45CHard Chrome Plating1625 ～ 13982 ～ 560 ～ 1388--6 ～ 146

-

1 Piece(s) 7 Day(s) [Steel] S45CHard Chrome Plating2025 ～ 13982 ～ 680 ～ 1388457 ～ 17-

-

1 Piece(s) 7 Day(s) [Steel] S45CHard Chrome Plating2025 ～ 13982 ～ 680 ～ 1388--7 ～ 176

-

1 Piece(s) 7 Day(s) [Steel] S45CHard Chrome Plating2525 ～ 13982 ～ 880 ～ 13884 ～ 1657 ～ 22-

-

1 Piece(s) 7 Day(s) [Steel] S45CHard Chrome Plating2525 ～ 13982 ～ 880 ～ 1388--7 ～ 226

-

1 Piece(s) 7 Day(s) [Stainless Steel] SUS440C or EquivalentHard Chrome Plating3025 ～ 14982 ～ 1080 ～ 1498-5 ～ 249 ～ 27-

-

1 Piece(s) 7 Day(s) [Stainless Steel] SUS440C or EquivalentHard Chrome Plating3025 ～ 14982 ～ 1080 ～ 1498--9 ～ 276 ～ 20

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Not Provided825 ～ 10982 ～ 240 ～ 10903-6-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Not Provided1025 ～ 11982 ～ 320 ～ 11903 ～ 456-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Not Provided1225 ～ 13982 ～ 400 ～ 13883 ～ 456 ～ 10-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Not Provided1225 ～ 13982 ～ 400 ～ 1388--6 ～ 106

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Not Provided1325 ～ 13982 ～ 520 ～ 13883 ～ 456 ～ 11-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Not Provided1325 ～ 13982 ～ 520 ～ 1388--6 ～ 116

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Not Provided1525 ～ 13982 ～ 520 ～ 13883 ～ 456 ～ 13-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Not Provided1525 ～ 13982 ～ 520 ～ 1388--6 ～ 136

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Not Provided1625 ～ 13982 ～ 560 ～ 13883 ～ 456 ～ 14-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Not Provided1625 ～ 13982 ～ 560 ～ 1388--6 ～ 146

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Not Provided2025 ～ 13982 ～ 680 ～ 1388457 ～ 17-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Not Provided2025 ～ 13982 ～ 680 ～ 1388--7 ～ 176

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Not Provided2525 ～ 13982 ～ 880 ～ 13884 ～ 1657 ～ 22-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Not Provided2525 ～ 13982 ～ 880 ～ 1388--7 ～ 226

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Not Provided3025 ～ 14982 ～ 1080 ～ 1498-5 ～ 249 ～ 27-

-

1 Piece(s) 7 Day(s) [Steel] S45C or GCr15Not Provided3025 ～ 14982 ～ 1080 ～ 1498--9 ～ 276 ～ 20

-

1 Piece(s) 7 Day(s) [Steel] S45CNot Provided825 ～ 10982 ～ 240 ～ 10903-6-

-

1 Piece(s) 7 Day(s) [Steel] S45CNot Provided1025 ～ 11982 ～ 320 ～ 11903 ～ 456-

-

1 Piece(s) 7 Day(s) [Steel] S45CNot Provided1225 ～ 13982 ～ 400 ～ 13883 ～ 456 ～ 10-

-

1 Piece(s) 7 Day(s) [Steel] S45CNot Provided1225 ～ 13982 ～ 400 ～ 1388--6 ～ 106

-

1 Piece(s) 7 Day(s) [Steel] S45CNot Provided1325 ～ 13982 ～ 520 ～ 13883 ～ 456 ～ 11-

-

1 Piece(s) 7 Day(s) [Steel] S45CNot Provided1325 ～ 13982 ～ 520 ～ 1388--6 ～ 116

-

1 Piece(s) 7 Day(s) [Steel] S45CNot Provided1525 ～ 13982 ～ 520 ～ 13883 ～ 456 ～ 13-

-

1 Piece(s) 7 Day(s) [Steel] S45CNot Provided1525 ～ 13982 ～ 520 ～ 1388--6 ～ 136

-

1 Piece(s) 7 Day(s) [Steel] S45CNot Provided1625 ～ 13982 ～ 560 ～ 13883 ～ 456 ～ 14-

Loading...

  1. 1
  2. 2
  3. Next >>

Basic Information

Basic Shape One End Stepped End Shape (Left) Tapped End Shape (Right) No Machining
Shaft End Perpendicularity Perpendicularity (0.2) Heat Treatment Induction Hardened Shaft Fit Tolerance g7
Precision Standard Fastening Tool Type No

Configure

Clear All

67 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Material

    • Steel
      • S45C
      • S45C or GCr15
    • Stainless Steel
      • SUS440C or Equivalent

    Clear

  • Surface Treatment

    • Not Provided
    • Hard Chrome Plating

    Clear

  • Shaft Dia. D(Ø)

    • 8
    • 10
    • 12
    • 13
    • 15
    • 16
    • 20
    • 25
    • 30
    • 35
    • 40
    • 50

    Clear

  • Length L(mm)

     [25-1498/1mm Unit(s)]

    Clear

  • F(mm)

     [2-188/1mm Unit(s)]

    Clear

  • SC(mm)

     [0-1498/1mm Unit(s)]

    Clear

  • M(mm)

    • 3
    • 4
    • 16

    Clear

  • Thread M (Coarse Thread)(mm)

    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20
    • 24

    Clear

  • P(mm)

    • 6

     [6-47/1mm Unit(s)]

    Clear

  • MD

    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Clear

  • type

    • E-PSFPG
    • E-PSSFPG
    • E-SFPG
    • E-SSFPG

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 7 Day(s) or Less
    • 10 Day(s) or Less

    Clear

Specify Alterations

Additional Products in this Category

Tech Support

Technical Inquiry

Payment Method

more
  • Credit Card
    • VISA
    • MasterCard
  • Bank Transfer
    • FPX
    • Interbank GIRO (IBG)

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm,    9am – 1pm(Sat) * Order cut-off time is 12pm

  • Tel: (60) 3 7890 6399
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.