[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Linear Shafts Both End Stepped, Both End Tapped

MISUMI

MiSUMi Economy

MISUMI

This is an economy item, The price is cheaper than the MISUMI standard product.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers

Product Overview

The linear guide shaft is a high-precision shaft product that can be used in combination with linear bearings and other bushing-type products. It not only offers excellent wear resistance, but also provides a variety of additional processing options.

Dimensional Drawing

Introduction to MISUMI guide shafts with stepped ends and internal threads / stepped ends

Material Specifications

Type				Material	Hardness	Surface Treatment
Double stepped ends with internal thread type		Double stepped ends type
Standard Type		Standard Type
D Tolerance g7	D Tolerance f8	D Tolerance g7	D Tolerance f8
E-SFAH	-	E-SFAJ	-	45 or GCr15	High-frequency quenching For effective hardened layer depth, please click Surface Hardness Reference 45 or GCr15 55HRC~ SUS440C or equivalent high-hardness corrosion-resistant steel 53HRC or more	-
E-SSFAH	-	E-SSFAJ	-	SUS440C or equivalent high-hardness corrosion-resistant steel		-
E-PSFAH	-	E-PSFAJ	-	45 or GCr15		Hard chrome plating Plating hardness HV750~ Plating thickness above 3µ
E-PSSFAH	-	E-PSSFAJ	-	SUS440C or equivalent high-hardness corrosion-resistant steel
-	E-PSFGH	-	E-PSFGJ	45	-	Hard chrome plating Plating hardness: HV750~ Plating thickness: 10µ or more

The machined part at the shaft end (effective thread length + approx. 10 mm) may have reduced hardness due to the annealing effect of machining.

If rust prevention is required, please give priority to products with hard chrome plating Surface Treatment. Please click

Rust Prevention Methods

If used together with linear bearings, please choose products with high-frequency quenching.

Specifications Overview

■ Tolerance of section D

D	g7	f8
8	-0.005 -0.020	-0.013 -0.035
10
12	-0.006 -0.024	-0.016 -0.043
13
15
16
18
20	-0.007 -0.028	-0.020 -0.053
25
30
35	-0.009 -0.034	-
40
50

Alterations

Code

Spec.

LKC

Change L dimension tolerance
Ordering Code LKC

Not applicable when D-P ≤ 2. When using LKC, the unit specified for the L dimension can be 0.1 mm.

L<200 → L±0.03
200 ≤ L<500 → L±0.05
L ≥ 500 → L±0.1

Add a wrench slot at one location
Ordering Code SC5

SC = specified unit 1 mm

SC + ℓ₁ < L

SC = 0 or SC ≥ 1
Applicable conditions Applicable for D ≥ 8

Cannot be used together with WSC

D	W	ℓ₁
8	7	8
10	8	8
12	10	10
13	11
15	13

D	W	ℓ₁
16	14	10
20	17
25	22
30	27	15

WSC

Additional wrench slot machining at 2 locations
Ordering Code WSC12-X8
WSC, X = specified unit 1 mm

WSC + X + ℓ₁ × 2 ≤ L - 2

WSC(X) ≥ 0

Cannot be machined on the same plane

D	W	ℓ₁
8	7	8
10	8	8
12	10	10
13	11
15	13
16	14
18	16

D	W	ℓ₁
20	17	10
25	22	10
30	27	15
35	30	15
40	36	20
50	41	20

Additional flat machining at 1 location
Ordering Code FC10-E8
FC, E = specified unit 1 mm

D ≤ 30: FC ≤ 5×D,
D ≥ 35: FC ≤ 3×D

E=0 or E ≥ 2

Cannot be used together with WFC

D	h
8 to 16	1
20 to 40	2
50	3

WFC

Additional surface machining at 2 locations
Ordering Code WFC8-A8-E4
WFC, A, E = specified unit 1 mm

D ≤ 30: WFC ≤ 5×D,
D ≥ 35: WFC ≤ 3×D

A(E)=0 or A(E) ≥ 2

Cannot be machined on the same surface, cannot be used together with FC

D	h
8 to 16	1
20 to 40	2
50	3

Add one flat surface at a 90-degree position
Ordering Code RC10
Applicable conditions Applicable for D=10 to 30

Cannot be used together with WRC

WRC

Add flat machining at two 90-degree positions
Ordering Code WRC10-Y10
Applicable conditions Applicable for D=10 to 30

Cannot be used together with RC

Cannot be machined on the same plane

Change the effective length of the internal thread section to M×3.
Ordering Code MD6 (change M to MD)
Applicable conditions Applicable for D=12 to 30 and M=6 to 20

Internal threads on both end steps: MD×3.5+4+MD×3.5+4 ≤ L

Cannot be used together with KC or WKC

LFC
RFC

Additional flat machining on the stepped section
Ordering Code LFC10-A0
RFC10-E0

LFC(RFC)+A(E) ≤ F(T)

D-M ≥ 1

Cannot be machined on the same plane

P	H
6 to 18	1
20 to 40	2
41 or more	2

Add an additional keyway
Ordering Code KC10-G10

KC, G = specified unit 1 mm

b ≤ G ≤ 30, G ≤ L/3

L>500: 2 ≤ KC ≤ L/3
L<500: 2 ≤ KC ≤ 500

M×2<KC+F
Only applicable for D = 12, 16, 20, 25, 30

Internal thread section (M×2.5+4) is not applicable for this additional machining.

MISUMI linear guide shaft with retaining ring groove, steering shaft, linear shaft, chrome-plated rod

Shaft diameter	b		t		r
	Nominal dimension	Permissible tolerance (N9)	Nominal dimension	Permissible tolerance
12	4	0 -0.03	2.5	+0.1 0	0.08 to 0.16
16	5		3		0.16 to 0.25
20	6		3.5
25	8	0 -0.036	4	+0.2 0
30

When KC and WKC = 0, the keyway shape is as shown below.

When KC + G ≥ L, the keyway shape is as shown below.

WKC

Add two additional keyways
Ordering Code KC10-G10-WKC10-C8

KC, WKC, G, C = specified unit 1 mm

b ≤ G(C) ≤ 30, G(C) ≤ L/3

L > 500: 2 ≤ KC(WKC) ≤ L/3
L < 500: 2 ≤ KC(WKC) ≤ 500

G + C ≤ L/3

M × 2 < KC + F
Only applicable for D = 12, 16, 20, 25, 30

Cannot be machined on the same plane

Internal thread section (M × 2.5 + 4) is not applicable for this additional machining.

When selecting multiple additional machining operations, there must be a gap of at least 2 mm between machining locations.

Additional machining may result in reduced hardness. Please refer to

P.36

Specification Table

Part Number		Specified unit: 1 mm			M (Coarse thread) Select											(Y) Max.
Type	D	L	F·T	P	M (Coarse thread) Select											(Y) Max.
Standard Type Double stepped ends with internal thread type (D Tolerance g7) E-SFAH E-SSFAH E-PSFAH E-PSSFAH (D Tolerance f8) E-PSFGH Double stepped ends type (D Tolerance g7) E-SFAJ E-SSFAJ E-PSFAJ E-PSSFAJ (D Tolerance f8) E-PSFGJ	8	25–1096	8 ≤ D ≤ 30 2 ≤ F(T) ≤ P×5 D ≥ 35 2 ≤ F(T) ≤ P×4	3–6	3											1100
	10	25–1196		3–8	3	4	5									1200
	12	25–1396		3–10	3	4	5	6								1400
	13	25–1396		4–11	3	4	5	6	8							1400
	15	25–1396		4–13	3	4	5	6	8	10						1400
	16	25–1396		4–14	3	4	5	6	8	10						1400
	20	25–1396		5–17		4	5	6	8	10	12					1400
	25	25–1396		6–22		4	5	6	8	10	12	16				1400
	30	25–1496		8–27			5	6	8	10	12	16	20	24		1500
	35	25–1496		9–32			5	6	8	10	12	16	20			1500
	40	25–1496		11–37				6	8	10	12	16	20	24		1500
	50	25–1496		11–47				6	8	10	12	16	20	24	30	1500

Outer diameters 35, 40, and 50 are only available for E-PSFAH and E-PSFAJ specifications.

The P dimension must satisfy M+3 ≤ P.

When (M×2.5+4)×2 ≥ (Y), the thread bottom hole may penetrate through.

Product Features

Feature 1: Offers high-precision dimensional tolerances and is widely used in various precision equipment.
Feature 2: Uses bearing steel with excellent wear resistance (45 or GCr15) and SUS440C or equivalent high-hardness, corrosion-resistant steel, which undergo high-frequency quenching to enhance wear resistance while maintaining original toughness.
Feature 3: Various additional processing options are available to meet different usage environments.
Feature 4: Typically used in combination with linear bearing products, it provides excellent linear guidance. Compared to standard shaft and bushing structures, even during high-speed reciprocating motion, there is minimal wear.
Feature 5: Hard chrome plating is available as a Surface Treatment, offering excellent rust resistance. The coating hardness reaches HV750, so it will not be easily worn even when used with high-hardness workpieces.

Precautions

(2) Reduced hardness in machined areas
After quenching the base material, machining may cause reduced hardness due to annealing in the following areas:
- All external threads
- All steps
- Internal threads: When M ≥ D/2, double-hole internal threads, hard chrome-plated products made of SUS440C or equivalent high-hardness corrosion-resistant steel
- Additional machining of wrench slots (SC-WSC-SX)
- Additional machining of flat surfaces (FC-WFC)

Only the shaded area in section D is hard chrome plated.
Guide shaft double stepped internal thread type, double stepped bushing, MISUMI quality, Japanese imported stainless steel material

(3) Plating after Surface Treatment
After Surface Treatment of the base material, machining is performed, and the following areas are not plated:
- Groove areas
-External thread sections
-Internal thread sections
-Wrench slots, V-grooves, flat surfaces, and cut surfaces
-The inside of pipe-type guide shafts is not hard chrome plated and may rust.

Example of Use

Standard Linear Motion Mechanism	Functions of the Standard Linear Motion Mechanism (1) Using two guide shafts in parallel effectively prevents the workpiece from rotating. (2) Improves the accuracy of linear motion and load-bearing capacity. (3) High-speed reciprocating motion can be achieved through the combination of guide shafts and linear bearings. (4) Low running resistance, resulting in less wear on the corresponding workpiece.
Example Diagram


Actual Product Photo	Functions of Key Components in the Mechanism Linear guide shaft: Supports the workpiece and, when used with linear bearings, provides guiding functionality. For details, click Linear Guide Shaft Linear bushing: Uses a ball circulation structure to drive the workpiece along the guide shaft. Click for details Linear Bushing Guide shaft support: Supports and secures the guide shaft, effectively adjusts the shaft spacing, and improves the stability of the equipment. Click for details Guide Shaft Support Pusher: Serves as a limit, used to adjust the effective stroke of the mechanism Click for details Pusher

Application Industries

Medical	Semiconductors	Electronics and Electrical Appliances

Smartphones	Food	Automotive

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
E-PSFAH8-[25-996/1]-F[2-24/1]-P6-M3-T[2-24/1]
E-PSFAH10-[25-996/1]-F[2-32/1]-P[6-8/1]-M[3,4,5]-T[2-32/1]
E-PSFAH12-[25-1196/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-T[2-40/1]
E-PSFAH13-[25-1196/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-T[2-44/1]
E-PSFAH15-[25-1196/1]-F[2-52/1]-P[6-14/1]-M[3,4,5,6,8,10]-T[2-45/1]
E-PSFAH16-[25-1196/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-T[2-56/1]
E-PSFAH20-[25-1196/1]-F[2-68/1]-P[8-17/1]-M[4,5,6,8,10,12]-T[2-68/1]
E-PSFAH25-[25-1196/1]-F[2-88/1]-P[8-22/1]-M[4,5,6,8,10,12,16]-T[2-88/1]
E-PSFAH30-[25-1496/1]-F[2-108/1]-P[9-27/1]-M[5,6,8,10,12,16,20,24]-T[2-108/1]
E-PSFAH35-[25-1496/1]-F[2-128/1]-P[9-32/1]-M[5,6,8,10,12,16,20]-T[2-128/1]
E-PSFAH40-[25-1496/1]-F[2-148/1]-P[11-37/1]-M[6,8,10,12,16,20,24]-T[2-148/1]
E-PSFAH50-[25-1496/1]-F[2-188/1]-P[11-47/1]-M[6,8,10,12,16,20,24,30]-T[2-188/1]
E-PSFAJ8-[25-996/1]-F[2-24/1]-P6-T[2-24/1]
E-PSFAJ10-[25-996/1]-F[2-32/1]-P[6-8/1]-T[2-32/1]
E-PSFAJ12-[25-1196/1]-F[2-40/1]-P[6-10/1]-T[2-40/1]
E-PSFAJ13-[25-1196/1]-F[2-44/1]-P[6-11/1]-T[2-44/1]
E-PSFAJ15-[25-1196/1]-F[2-52/1]-P[6-13/1]-T[2-52/1]
E-PSFAJ16-[25-1196/1]-F[2-56/1]-P[6-14/1]-T[2-56/1]
E-PSFAJ20-[25-1196/1]-F[2-68/1]-P[8-17/1]-T[2-68/1]
E-PSFAJ25-[25-1196/1]-F[2-88/1]-P[8-22/1]-T[2-88/1]
E-PSFAJ30-[25-1496/1]-F[2-108/1]-P[9-27/1]-T[2-108/1]
E-PSFAJ35-[25-1496/1]-F[2-128/1]-P[9-32/1]-T[2-128/1]
E-PSFAJ40-[25-1496/1]-F[2-148/1]-P[11-37/1]-T[2-148/1]
E-PSFAJ50-[25-1496/1]-F[2-188/1]-P[11-47/1]-T[2-188/1]
E-PSSFAH8-[25-996/1]-F[2-24/1]-P6-M3-T[2-24/1]
E-PSSFAH10-[25-996/1]-F[2-32/1]-P[6-8/1]-M[3,4,5]-T[2-32/1]
E-PSSFAH12-[25-1196/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-T[2-40/1]
E-PSSFAH13-[25-1196/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-T[2-44/1]
E-PSSFAH15-[25-1196/1]-F[2-44/1]-P[6-13/1]-M[3,4,5,6,8,10]-T[2-44/1]
E-PSSFAH16-[25-1196/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-T[2-56/1]
E-PSSFAH20-[25-1196/1]-F[2-68/1]-P[8-17/1]-M[4,5,6,8,10,12]-T[2-68/1]
E-PSSFAH25-[25-1196/1]-F[2-88/1]-P[8-22/1]-M[4,5,6,8,10,12,16]-T[2-88/1]
E-PSSFAH30-[25-1496/1]-F[2-108/1]-P[9-27/1]-M[5,6,8,10,12,16,20,24]-T[2-108/1]
E-PSSFAJ8-[25-996/1]-F[2-24/1]-P6-T[2-24/1]
E-PSSFAJ10-[25-996/1]-F[2-32/1]-P[6-8/1]-T[2-32/1]
E-PSSFAJ12-[25-1196/1]-F[2-40/1]-P[6-10/1]-T[2-40/1]
E-PSSFAJ13-[25-1196/1]-F[2-44/1]-P[6-11/1]-T[2-44/1]
E-PSSFAJ15-[25-1196/1]-F[2-52/1]-P[6-13/1]-T[2-52/1]
E-PSSFAJ16-[25-1196/1]-F[2-56/1]-P[6-14/1]-T[2-56/1]
E-PSSFAJ20-[25-1196/1]-F[2-68/1]-P[8-17/1]-T[2-68/1]
E-PSSFAJ25-[25-1196/1]-F[2-88/1]-P[8-22/1]-T[2-88/1]
E-PSSFAJ30-[25-1496/1]-F[2-108/1]-P[9-27/1]-T[2-108/1]
E-SFAH8-[25-996/1]-F[2-24/1]-P6-M3-T[2-24/1]
E-SFAH10-[25-996/1]-F[2-32/1]-P[6-8/1]-M[3,4,5]-T[2-32/1]
E-SFAH12-[25-1196/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-T[2-40/1]
E-SFAH13-[25-1196/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-T[2-44/1]
E-SFAH15-[25-1196/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-T[2-52/1]
E-SFAH16-[25-1196/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-T[2-56/1]
E-SFAH20-[25-1196/1]-F[2-68/1]-P[8-17/1]-M[4,5,6,8,10,12]-T[2-68/1]
E-SFAH25-[25-1196/1]-F[2-88/1]-P[8-22/1]-M[4,5,6,8,10,12,16]-T[2-88/1]
E-SFAH30-[25-1496/1]-F[2-108/1]-P[9-27/1]-M[5,6,8,10,12,16,20,24]-T[2-108/1]
E-SFAJ8-[25-996/1]-F[2-24/1]-P6-T[2-24/1]
E-SFAJ10-[25-996/1]-F[2-32/1]-P[6-8/1]-T[2-32/1]
E-SFAJ12-[25-1196/1]-F[2-40/1]-P[6-10/1]-T[2-40/1]
E-SFAJ13-[25-1196/1]-F[2-44/1]-P[6-11/1]-T[2-44/1]
E-SFAJ15-[25-1196/1]-F[2-52/1]-P[6-13/1]-T[2-52/1]
E-SFAJ16-[25-1196/1]-F[2-56/1]-P[6-14/1]-T[2-56/1]
E-SFAJ20-[25-1196/1]-F[2-68/1]-P[8-17/1]-T[2-68/1]
E-SFAJ25-[25-1196/1]-F[2-88/1]-P[8-22/1]-T[2-88/1]
E-SFAJ30-[25-1496/1]-F[2-108/1]-P[9-27/1]-T[2-108/1]

Standard Unit Price	Minimum order quantity	Days to Ship	End Shape (Left)	End Shape (Right)	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	F (mm)	M (mm)	P (mm)	T (mm)
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	8	25 ～ 996	g7	2 ～ 24	3	6	2 ～ 24
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	10	25 ～ 996	g7	2 ～ 32	3 ～ 5	6 ～ 8	2 ～ 32
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	12	25 ～ 1196	g7	2 ～ 40	3 ～ 6	6 ～ 10	2 ～ 40
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	13	25 ～ 1196	g7	2 ～ 44	3 ～ 8	6 ～ 11	2 ～ 44
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	15	25 ～ 1196	g7	2 ～ 52	3 ～ 10	6 ～ 14	2 ～ 45
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	16	25 ～ 1196	g7	2 ～ 56	3 ～ 10	6 ～ 14	2 ～ 56
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	20	25 ～ 1196	g7	2 ～ 68	4 ～ 12	8 ～ 17	2 ～ 68
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	25	25 ～ 1196	g7	2 ～ 88	4 ～ 16	8 ～ 22	2 ～ 88
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	30	25 ～ 1496	g7	2 ～ 108	5 ～ 24	9 ～ 27	2 ～ 108
-	1 Piece(s)	10 Day(s)	Tapped	Tapped	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	35	25 ～ 1496	g7	2 ～ 128	5 ～ 20	9 ～ 32	2 ～ 128
-	1 Piece(s)	10 Day(s)	Tapped	Tapped	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	40	25 ～ 1496	g7	2 ～ 148	16 ～ 20	11 ～ 37	2 ～ 148
-	1 Piece(s)	10 Day(s)	Tapped	Tapped	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	50	25 ～ 1496	g7	2 ～ 188	16 ～ 20	11 ～ 47	2 ～ 188
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	8	25 ～ 996	g7	2 ～ 24	-	6	2 ～ 24
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	10	25 ～ 996	g7	2 ～ 32	-	6 ～ 8	2 ～ 32
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	12	25 ～ 1196	g7	2 ～ 40	-	6 ～ 10	2 ～ 40
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	13	25 ～ 1196	g7	2 ～ 44	-	6 ～ 11	2 ～ 44
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	15	25 ～ 1196	g7	2 ～ 52	-	6 ～ 13	2 ～ 52
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	16	25 ～ 1196	g7	2 ～ 56	-	6 ～ 14	2 ～ 56
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	20	25 ～ 1196	g7	2 ～ 68	-	8 ～ 17	2 ～ 68
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	25	25 ～ 1196	g7	2 ～ 88	-	8 ～ 22	2 ～ 88
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	30	25 ～ 1496	g7	2 ～ 108	-	9 ～ 27	2 ～ 108
-	1 Piece(s)	10 Day(s)	No Machining	No Machining	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	35	25 ～ 1496	g7	2 ～ 128	-	9 ～ 32	2 ～ 128
-	1 Piece(s)	10 Day(s)	No Machining	No Machining	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	40	25 ～ 1496	g7	2 ～ 148	-	11 ～ 37	2 ～ 148
-	1 Piece(s)	10 Day(s)	No Machining	No Machining	[Steel] S45C or GCr15	Induction Hardened	Hard Chrome Plating	50	25 ～ 1496	g7	2 ～ 188	-	11 ～ 47	2 ～ 188
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Stainless Steel] SUS440C or Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 996	g7	2 ～ 24	3	6	2 ～ 24
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Stainless Steel] SUS440C or Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 996	g7	2 ～ 32	3 ～ 5	6 ～ 8	2 ～ 32
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Stainless Steel] SUS440C or Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 1196	g7	2 ～ 40	3 ～ 6	6 ～ 10	2 ～ 40
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Stainless Steel] SUS440C or Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 1196	g7	2 ～ 44	3 ～ 8	6 ～ 11	2 ～ 44
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Stainless Steel] SUS440C or Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 1196	g7	2 ～ 44	3 ～ 10	6 ～ 13	2 ～ 44
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Stainless Steel] SUS440C or Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1196	g7	2 ～ 56	3 ～ 10	6 ～ 14	2 ～ 56
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Stainless Steel] SUS440C or Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1196	g7	2 ～ 68	4 ～ 12	8 ～ 17	2 ～ 68
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Stainless Steel] SUS440C or Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 1196	g7	2 ～ 88	4 ～ 16	8 ～ 22	2 ～ 88
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Stainless Steel] SUS440C or Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 1496	g7	2 ～ 108	5 ～ 24	9 ～ 27	2 ～ 108
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Stainless Steel] SUS440C or Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 996	g7	2 ～ 24	-	6	2 ～ 24
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Stainless Steel] SUS440C or Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 996	g7	2 ～ 32	-	6 ～ 8	2 ～ 32
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Stainless Steel] SUS440C or Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 1196	g7	2 ～ 40	-	6 ～ 10	2 ～ 40
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Stainless Steel] SUS440C or Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 1196	g7	2 ～ 44	-	6 ～ 11	2 ～ 44
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Stainless Steel] SUS440C or Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 1196	g7	2 ～ 52	-	6 ～ 13	2 ～ 52
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Stainless Steel] SUS440C or Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1196	g7	2 ～ 56	-	6 ～ 14	2 ～ 56
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Stainless Steel] SUS440C or Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1196	g7	2 ～ 68	-	8 ～ 17	2 ～ 68
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Stainless Steel] SUS440C or Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 1196	g7	2 ～ 88	-	8 ～ 22	2 ～ 88
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Stainless Steel] SUS440C or Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 1496	g7	2 ～ 108	-	9 ～ 27	2 ～ 108
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Steel] S45C or GCr15	Induction Hardened	Not Provided	8	25 ～ 996	g7	2 ～ 24	3	6	2 ～ 24
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Steel] S45C or GCr15	Induction Hardened	Not Provided	10	25 ～ 996	g7	2 ～ 32	3 ～ 5	6 ～ 8	2 ～ 32
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Steel] S45C or GCr15	Induction Hardened	Not Provided	12	25 ～ 1196	g7	2 ～ 40	3 ～ 6	6 ～ 10	2 ～ 40
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Steel] S45C or GCr15	Induction Hardened	Not Provided	13	25 ～ 1196	g7	2 ～ 44	3 ～ 8	6 ～ 11	2 ～ 44
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Steel] S45C or GCr15	Induction Hardened	Not Provided	15	25 ～ 1196	g7	2 ～ 52	3 ～ 10	6 ～ 13	2 ～ 52
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Steel] S45C or GCr15	Induction Hardened	Not Provided	16	25 ～ 1196	g7	2 ～ 56	3 ～ 10	6 ～ 14	2 ～ 56
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Steel] S45C or GCr15	Induction Hardened	Not Provided	20	25 ～ 1196	g7	2 ～ 68	4 ～ 12	8 ～ 17	2 ～ 68
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Steel] S45C or GCr15	Induction Hardened	Not Provided	25	25 ～ 1196	g7	2 ～ 88	4 ～ 16	8 ～ 22	2 ～ 88
-	1 Piece(s)	7 Day(s)	Tapped	Tapped	[Steel] S45C or GCr15	Induction Hardened	Not Provided	30	25 ～ 1496	g7	2 ～ 108	5 ～ 24	9 ～ 27	2 ～ 108
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Steel] S45C or GCr15	Induction Hardened	Not Provided	8	25 ～ 996	g7	2 ～ 24	-	6	2 ～ 24
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Steel] S45C or GCr15	Induction Hardened	Not Provided	10	25 ～ 996	g7	2 ～ 32	-	6 ～ 8	2 ～ 32
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Steel] S45C or GCr15	Induction Hardened	Not Provided	12	25 ～ 1196	g7	2 ～ 40	-	6 ～ 10	2 ～ 40
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Steel] S45C or GCr15	Induction Hardened	Not Provided	13	25 ～ 1196	g7	2 ～ 44	-	6 ～ 11	2 ～ 44
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Steel] S45C or GCr15	Induction Hardened	Not Provided	15	25 ～ 1196	g7	2 ～ 52	-	6 ～ 13	2 ～ 52
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Steel] S45C or GCr15	Induction Hardened	Not Provided	16	25 ～ 1196	g7	2 ～ 56	-	6 ～ 14	2 ～ 56
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Steel] S45C or GCr15	Induction Hardened	Not Provided	20	25 ～ 1196	g7	2 ～ 68	-	8 ～ 17	2 ～ 68
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Steel] S45C or GCr15	Induction Hardened	Not Provided	25	25 ～ 1196	g7	2 ～ 88	-	8 ～ 22	2 ～ 88
-	1 Piece(s)	7 Day(s)	No Machining	No Machining	[Steel] S45C or GCr15	Induction Hardened	Not Provided	30	25 ～ 1496	g7	2 ～ 108	-	9 ～ 27	2 ～ 108

Basic Information

Basic Shape	Both Ends Stepped	Shaft End Perpendicularity	Perpendicularity (0.2)	Precision	Standard
Fastening Tool Type	No

Configure

78 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

End Shape (Left)
- No Machining
- Tapped
Clear
End Shape (Right)
- No Machining
- Tapped
Clear
Material
- S45C
- Steel
  - S45C or GCr15
- Stainless Steel
  - SUS440C or Equivalent
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
Clear
Shaft Dia. D(Ø)
8

10

12

13

15

16

20

25

30

35

40

50
Clear
Length L(mm)
[25-1496/1mm Unit(s)]
Clear
F(mm)
[2-188/1mm Unit(s)]
Clear
M(mm)
3

4

5

6

8

10

12

16

20

24
Clear
P(mm)
6
[6-47/1mm Unit(s)]
Clear
T(mm)
[2-188/1mm Unit(s)]
Clear
type
- E-PSFAH
- E-PSFAJ
- E-PSFGH
- E-PSFGJ
- E-PSSFAH
- E-PSSFAJ
- E-SFAH
- E-SFAJ
- E-SSFAH
- E-SSFAJ
Clear
Shaft Fit Tolerance
f8

g7
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

7 Day(s) or Less

10 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Tech Support

: Technical Inquiry

Linear Bearing Standard Type, Straight Cylinder Type	Bearing Housing Assembly T Type	Retaining Ring Open Type

Representative model: LMU6	Representative model: BGHFS6000ZZ-30	Representative model: PSCS10-10
Advantages: High quality, low price, short lead time	Advantages: Complete range, high precision and high quality	Advantages: Supporting shaft products, complete range

How can we improve?

Linear Shafts Both End Stepped, Both End Tapped

Part Number

Basic Information

Configure

Specification/Dimensions

End Shape (Left)

End Shape (Right)

Material

Heat Treatment

Surface Treatment

Shaft Dia. D(Ø)

Length L(mm)

F(mm)

M(mm)

P(mm)

T(mm)

type

Shaft Fit Tolerance

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm