(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Pivot Pins Shouldered, Hex Socket Head, Lock Nut
- RoHS
Part Number
Configured Part Number is shown.
Product Overview
The hinge pin can be used as the pivot point of various rotary connection mechanisms. The pivot point is similar to the axis of a hinge, and the connected parts can make rotary movements.
Dimensional Drawing
This type may have centering holes depending on dimensions.The dimension of the relief groove on the shoulder and neck is a reference value.For L Dimension, common cutting and machining tolerances (medium class) are used.E-CLBR, E-CLBRU, E-PCLBR and E-PCLBRU have identification grooves on the side in order to distinguish them from the hardened type.Specifications Overview
・Material Table
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel, hard-chrome plated products or those with surface treatment of electroless nickel plating.
E-SCLBRH, E-SCLBRHU, E-GSCLBR and E-GSCLBRU may be discolored due to hardening.
For U-Nut specifications, click 
U-Nut
| Type | D[Φ:mm] |  Equivalent Material |  Hardness |  Surface Treatment |  Accessory (1 pcs) | ||
| Standard Nut | U-Nut | Standard Nut | U-Nut | ||||
| E-CLBR | E-CLBRU | 4~25 | General structural steel or carbon steel | - | Ferroferric Oxide Protective Film | SWRCH | SS400 (UNUTK) |
| E-CLBRH | E-CLBRHU | HRC40～ | |||||
| E-PCLBR | E-PCLBRU | - | Electroless Nickel Plating | Austenitic stainless steel | Austenitic stainless steel (UNUTS) | ||
| E-PCLBRH | E-PCLBRHU | HRC40～ | |||||
| E-GCLBR | E-GCLBRU | Plating hardness 750HV～ | Hard Chrome Plated | SWRM | SS400(UNUTK) | ||
| E-SCLBR | E-SCLBRU | Austenitic stainless steel | - | - | Austenitic stainless steel | Austenitic stainless steel (UNUTS) | |
| E-SCLBRH | E-SCLBRHU | Martensitic stainless steel | HRC45～ | ||||
| E-GSCLBR | E-GSCLBRU | HRC45～ Plating hardness 750HV～ | Hard Chrome Plated | ||||
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel, hard-chrome plated products or those with surface treatment of electroless nickel plating.E-SCLBRH, E-SCLBRHU, E-GSCLBR and E-GSCLBRU may be discolored due to hardening.For U-Nut specifications, click 
U-NutSpecification Table
| Part Number |  L0.1mm increments | A | T | F | B | E | (u) | (n) | M (Coarse Thread) | Attached Nut | ||
 Type |  D | |||||||||||
| Standard Nut E-CLBR E-CLBRH E-PCLBR E-PCLBRH E-GCLBR E-SCLBR E-SCLBRH E-GSCLBR | U-Nut E-CLBRU E-CLBRHU E-PCLBRU E-PCLBRHU E-GCLBRU E-SCLBRU E-SCLBRHU E-GSCLBRU | 4 | 10.0～ 50.0 | 7 | 5 | 6 | 2.5 | 2 | 3.9 | 1.5 | M 3 | M 3×0.5 |
| 5 | 10.0～ 60.0 | 9 | 4.9 | M 4 | M 4×0.7 | |||||||
| 6 | 10.0~100.0 | 10 | 9 | 3 | 5.8 | M 5 | M 5×0.8 | |||||
| 8 | 10.0~100.0 | 13 | 5 | 3 | 7.8 | M 6 | M 6×1.0 | |||||
| 10 | 16 | 12 | 6 | 4 | 9.8 | M 8 | M 8×1.25 | |||||
| 12 | 10.0~150.0 | 18 | 16 | 11.8 | M10 | M10×1.5 | ||||||
| 13 | 20.0~150.0 | 24 | 18 | 12.8 | M12 | M12×1.75 | ||||||
| 14 | 8 | 5 | 13.8 | |||||||||
| 15 | 14.8 | |||||||||||
| 16 | 20.0~150.0 | 15.8 | ||||||||||
| 17 | 16.8 | |||||||||||
| 18 | 24 | 17.8 | ||||||||||
| 20 | 27 | 10 | 6 | 19.8 | M16 | M16×2.0 | ||||||
| 22 | 20.0~150.0 | 21.8 | ||||||||||
| 25 | 30 | 12 | 8 | 24.8 | ||||||||
E-SCLBRH, E-SCLBRHU, E-GSCLBR and E-GSCLBRU may be discolored due to hardening.| D Tolerance (g7) | |
| 4~6 | -0.004 -0.016 |
| 8・10 | -0.005 -0.020 |
| 12~18 | -0.006 -0.024 |
| 20~25 | -0.007 -0.028 |
Product Features
Feature 1: It has a tolerance of g7 and is used in conjunction with bearings.
Feature 2: Available in various shapes. The shapes include straight cotter pin type, straight retaining ring type, shouldered cotter pin type, shouldered retaining ring type, shouldered lock nut type, set screw type, shouldered set screw type, and both ends tapped type.
Feature 3: Products made of austenitic stainless steel with excellent anti-rust performance and products with the surface treatment of hard-chrome plating or electroless nickel plating are available for selection to solve the problem of rusting.
Feature 4: L Dimension Configurable type, freely selectable in 0.1mm increments to accommodate different use environments.
Feature 2: Available in various shapes. The shapes include straight cotter pin type, straight retaining ring type, shouldered cotter pin type, shouldered retaining ring type, shouldered lock nut type, set screw type, shouldered set screw type, and both ends tapped type.
Feature 3: Products made of austenitic stainless steel with excellent anti-rust performance and products with the surface treatment of hard-chrome plating or electroless nickel plating are available for selection to solve the problem of rusting.
Feature 4: L Dimension Configurable type, freely selectable in 0.1mm increments to accommodate different use environments.
Precautions
①Dg7 tolerance is limited to the L dimension range. Others are general tolerances.
②Anti-rust specification selection and maintenance.
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel, products with surface treatment of hard chrome plating or those with surface treatment of electroless nickel plating.
Products without surface treatment need to be applied antirust oil regularly for maintenance.
③This product comes with 1 nut, so take care to avoid missing upon receipt.
④Alteration is only applicable to the L dimension configurable type.
②Anti-rust specification selection and maintenance.
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel, products with surface treatment of hard chrome plating or those with surface treatment of electroless nickel plating.
Products without surface treatment need to be applied antirust oil regularly for maintenance.
③This product comes with 1 nut, so take care to avoid missing upon receipt.
④Alteration is only applicable to the L dimension configurable type.
Example of Use
Application Industries
| Electronic & Electrical | Automotive | Lithium battery | ||
 |  |  | ||
| Robotics | Smart Phones | Semiconductor | ||
 |  |  |
Related Products
| Adjustment Screw Components Hex Socket on Head | Single Bearing Type with Retaining Ring Embedded | Packed Gasket Ring Fixed/Gasket Ring | ||
 |  |  | ||
| Representative model: ANB8-40 | Representative model: BGRR6000ZZ | Representative model: PCIMR6-12-0.1 | ||
| Advantages: manual adjustment and positioning, optional length | Advantages: full range, high precision | Advantages: full range, high precision and high quality |
Related Documents
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-CLBR4-[10-50/0.1] |
| E-CLBR5-[10-60/0.1] |
| E-CLBR6-[10-100/0.1] |
| E-CLBR8-[10-100/0.1] |
| E-CLBR10-[10-100/0.1] |
| E-CLBR12-[10-150/0.1] |
| E-CLBR13-[20-150/0.1] |
| E-CLBR14-[20-150/0.1] |
| E-CLBR15-[20-150/0.1] |
| E-CLBR16-[20-150/0.1] |
| E-CLBR17-[20-150/0.1] |
| E-CLBR18-[20-150/0.1] |
| E-CLBR20-[20-150/0.1] |
| E-CLBR22-[20-150/0.1] |
| E-CLBR25-[20-150/0.1] |
| E-CLBRH4-[10-50/0.1] |
| E-CLBRH5-[10-60/0.1] |
| E-CLBRH6-[10-100/0.1] |
| E-CLBRH8-[10-100/0.1] |
| E-CLBRH10-[10-100/0.1] |
| E-CLBRH12-[10-150/0.1] |
| E-CLBRH13-[20-150/0.1] |
| E-CLBRH14-[20-150/0.1] |
| E-CLBRH15-[20-150/0.1] |
| E-CLBRH16-[20-150/0.1] |
| E-CLBRH17-[20-150/0.1] |
| E-CLBRH18-[20-150/0.1] |
| E-CLBRH20-[20-150/0.1] |
| E-CLBRH22-[20-150/0.1] |
| E-CLBRH25-[20-150/0.1] |
| E-CLBRHU5-[10-60/0.1] |
| E-CLBRHU6-[10-100/0.1] |
| E-CLBRHU8-[10-100/0.1] |
| E-CLBRHU10-[10-100/0.1] |
| E-CLBRHU12-[10-150/0.1] |
| E-CLBRHU13-[20-150/0.1] |
| E-CLBRHU14-[20-150/0.1] |
| E-CLBRHU15-[20-150/0.1] |
| E-CLBRHU16-[20-150/0.1] |
| E-CLBRHU17-[20-150/0.1] |
| E-CLBRHU18-[20-150/0.1] |
| E-CLBRHU20-[20-150/0.1] |
| E-CLBRHU22-[20-150/0.1] |
| E-CLBRHU25-[20-150/0.1] |
| E-CLBRU5-[10-60/0.1] |
| E-CLBRU6-[10-100/0.1] |
| E-CLBRU8-[10-100/0.1] |
| E-CLBRU10-[10-100/0.1] |
| E-CLBRU12-[10-150/0.1] |
| E-CLBRU13-[20-150/0.1] |
| E-CLBRU14-[20-150/0.1] |
| E-CLBRU15-[20-150/0.1] |
| E-CLBRU16-[20-150/0.1] |
| E-CLBRU17-[20-150/0.1] |
| E-CLBRU18-[20-150/0.1] |
| E-CLBRU20-[20-150/0.1] |
| E-CLBRU22-[20-150/0.1] |
| E-CLBRU25-[20-150/0.1] |
| E-GCLBR4-[10-50/0.1] |
| E-GCLBR5-[10-60/0.1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Shaft Dia. D (mm) | Material | Hardness | Surface Treatment | Material Detail | Accessories | L Dimension Tolerance (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 7 Day(s) | 4 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | Standard Nut | 10 ～ 50 | ||
- | 1 Piece(s) | 7 Day(s) | 5 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | Standard Nut | 10 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | Standard Nut | 10 ～ 100 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | Standard Nut | 10 ～ 100 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | Standard Nut | 10 ～ 100 | ||
- | 1 Piece(s) | 7 Day(s) | 12 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | Standard Nut | 10 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 13 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | Standard Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 14 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | Standard Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | Standard Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 16 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | Standard Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 17 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | Standard Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 18 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | Standard Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 20 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | Standard Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 22 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | Standard Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 25 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | Standard Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 4 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | Standard Nut | 10 ～ 50 | ||
- | 1 Piece(s) | 7 Day(s) | 5 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | Standard Nut | 10 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | Standard Nut | 10 ～ 100 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | Standard Nut | 10 ～ 100 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | Standard Nut | 10 ～ 100 | ||
- | 1 Piece(s) | 7 Day(s) | 12 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | Standard Nut | 10 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 13 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | Standard Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 14 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | Standard Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | Standard Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 16 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | Standard Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 17 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | Standard Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 18 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | Standard Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 20 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | Standard Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 22 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | Standard Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 25 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | Standard Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 5 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | U-Nut | 10 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | U-Nut | 10 ～ 100 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | U-Nut | 10 ～ 100 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | U-Nut | 10 ～ 100 | ||
- | 1 Piece(s) | 7 Day(s) | 12 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | U-Nut | 10 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 13 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | U-Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 14 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | U-Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | U-Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 16 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | U-Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 17 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | U-Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 18 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | U-Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 20 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | U-Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 22 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | U-Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 25 | Steel | Hardness Requirement | Black Oxide | General structural steel or carbon steel | U-Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 5 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | U-Nut | 10 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | U-Nut | 10 ～ 100 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | U-Nut | 10 ～ 100 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | U-Nut | 10 ～ 100 | ||
- | 1 Piece(s) | 7 Day(s) | 12 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | U-Nut | 10 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 13 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | U-Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 14 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | U-Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | U-Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 16 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | U-Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 17 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | U-Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 18 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | U-Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 20 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | U-Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 22 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | U-Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 25 | Steel | Not Spec-designed | Black Oxide | General structural steel or carbon steel | U-Nut | 20 ～ 150 | ||
- | 1 Piece(s) | 7 Day(s) | 4 | Steel | Hardness Requirement | Hard Chrome Plating | General structural steel or carbon steel | Standard Nut | 10 ～ 50 | ||
- | 1 Piece(s) | 7 Day(s) | 5 | Steel | Hardness Requirement | Hard Chrome Plating | General structural steel or carbon steel | Standard Nut | 10 ～ 60 |
Loading...
Basic Information
| Mounting Method | Nut (Threaded) | Basic Shape | Shouldered | D Tolerance Selection | g7 |
|---|---|---|---|---|---|
| Type | L configurable | Hex Socket | Provided |
Specification/Dimensions
-
Shaft Dia. D(mm)
-
Material
- Steel
- Stainless Steel
-
Hardness
- Not Spec-designed
- Hardness Requirement
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Hard Chrome Plating
-
Material Detail
-
Accessories
- Standard Nut
- U-Nut
-
L Dimension Tolerance(mm)
-
type
- E-CLBR
- E-CLBRH
- E-CLBRHU
- E-CLBRU
- E-GCLBR
- E-GCLBRU
- E-GSCLBR
- E-GSCLBRU
- E-PCLBR
- E-PCLBRH
- E-PCLBRHU
- E-PCLBRU
- E-SCLBR
- E-SCLBRH
- E-SCLBRHU
- E-SCLBRU
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 7 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Pivot Pins - Cotter Pins
- Pivot Pins - Both Ends Tapped
- Pivot Pins Straight, Cotter Pin
- Pivot Pins Shouldered, Lock Nut
- Pivot Pins Shouldered, Tapped
- Pivot Pins Shouldered, Hex Socket Head, Tapped
- Pivot Pins Shaft Diameter Tolerance Selectable
- RoHS Compliant Pivot Pin - L Dimension Configurable, Straight Retaining Ring Type [RoHS Compliant]
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy