[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Pivot Pins Straight, Retaining Ring

MISUMI

MiSUMi Economy

MISUMI

RoHS

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers

Product Overview

The hinge pin can be used as the pivot point of various rotary connection mechanisms. The pivot point is similar to the axis of a hinge, and the connected parts can make rotary movements.

Dimensional Drawing

*Dg7 tolerance is limited to the L dimension part, and others are negative tolerances.

This type may have centering holes depending on dimensions.

E-CCG·E-PCCG have identification grooves on the side in order to distinguish them from the hardened type.

Specifications Overview

・Material Table

Type	Equivalent Material	Hardness	Surface Treatment	Accessories
L Dimension Configurable
E-CCG	General structural steel or carbon steel	-	Ferroferric Oxide Protective Film	2 Retaining Rings
E-CCGH		HRC40～
E-PCCG		-	Electroless Nickel Plating
E-PCCGH		HRC40～
E-GCCG		Plating hardness 750HV～	Hard Chrome Plated
E-SCCG	Austenitic stainless steel	-	-
E-SCCGH	Martensitic stainless steel	HRC45～
E-GSCCGH		HRC45～ Plating hardness 750HV～	Hard Chrome Plated

If there are requirements for rust prevention, give priority to products made of austenitic stainless steel, hard-chrome plated products or those with surface treatment of electroless nickel plating.

Specification Table

Part Number		L Selection	m		N	d
Type	D	L Dimension Configurable (0.1mm increments)		Tolerance			Tolerance
L Dimension Configurable E-CCG E-CCGH E-PCCG E-PCCGH E-GCCG E-SCCG E-SCCGH E-GSCCGH	2	5.0~30.0	0.5	+ 0.05 0	2	1.5	+ 0.06 0
	3	5.0~50.0				2
	4		0.7	+ 0.1 0		3
	5	10.0~60.0				4	+ 0.075 0
	6	10.0~100.0				5
	8		0.9		3	7	+ 0.09 0
	10	15.0~100.0	1.15	+ 0.14 0		9.6	0 - 0.09
	12	15.0~150.0			4	11.5	0 - 0.11
	13	25.0~150.0				12.4
	14					13.4
	15					14.3
	16	30.0~150.0				15.2
	17					16.2
	18		1.35			17
	20					19	0 - 0.21
	22					21
	25					23.9

E-SCLGHN may be discolored due to hardening.

For JIS engineering specifications of the supplied retaining ring, refer to

Retaining Ring Specifications

Accuracy Grade

D Tolerance (g7)
2・3	-0.002 -0.012
4~6	-0.004 -0.016
8・10	-0.005 -0.020
12~18	-0.006 -0.024
20~25	-0.007 -0.028

Product Features

Feature 1: It has a tolerance of g7 and is used in conjunction with bearings.
Feature 2: Available in various shapes. The shapes include straight cotter pin type, straight retaining ring type, shouldered cotter pin type, shouldered retaining ring type, shouldered lock nut type, set screw type, shouldered set screw type, and both ends tapped type.
Feature 3: Products made of stainless steel (austenitic stainless steel) with excellent anti-rust performance and products with the surface treatment of hard-chrome plating or electroless nickel plating are available for selection to solve the problem of rusting.
Feature 4: L Dimension Configurable type, freely selectable in 0.1mm increments to accommodate different use environments.
Feature 5: The L Dimension Fixed type is available at a relatively low price.

Precautions

①Dg7 tolerance is limited to the L dimension range. Others are general tolerances.
②Anti-rust specification selection and maintenance.
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel, products with surface treatment of hard chrome plating or those with surface treatment of electroless nickel plating.
Products without surface treatment need to be applied antirust oil regularly for maintenance.
③This product comes with 2 retaining rings, so take care to avoid missing upon receipt.
④Alteration is only applicable to the L dimension configurable type.

Example of Use

Hinge pin Straight retaining ring fixed type widely used

Application Industries

Electronic & Electrical	Automotive	Lithium battery

Robotics	Smart Phones	Semiconductor

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
E-CCG2-[5-30/0.1]
E-CCG3-[5-50/0.1]
E-CCG4-[5-50/0.1]
E-CCG5-[10-60/0.1]
E-CCG6-[10-100/0.1]
E-CCG8-[10-100/0.1]
E-CCG10-[15-100/0.1]
E-CCG12-[15-150/0.1]
E-CCG13-[25-150/0.1]
E-CCG14-[25-150/0.1]
E-CCG15-[25-150/0.1]
E-CCG16-[30-150/0.1]
E-CCG17-[30-150/0.1]
E-CCG18-[30-150/0.1]
E-CCG20-[30-150/0.1]
E-CCG22-[30-150/0.1]
E-CCG25-[30-150/0.1]
E-CCGH2-[5-30/0.1]
E-CCGH3-[5-50/0.1]
E-CCGH4-[5-50/0.1]
E-CCGH5-[10-60/0.1]
E-CCGH6-[10-100/0.1]
E-CCGH8-[10-100/0.1]
E-CCGH10-[15-100/0.1]
E-CCGH12-[15-150/0.1]
E-CCGH13-[25-150/0.1]
E-CCGH14-[25-150/0.1]
E-CCGH15-[25-150/0.1]
E-CCGH16-[30-150/0.1]
E-CCGH17-[30-150/0.1]
E-CCGH18-[30-150/0.1]
E-CCGH20-[30-150/0.1]
E-CCGH22-[30-150/0.1]
E-CCGH25-[30-150/0.1]
E-GCCG2-[5-30/0.1]
E-GCCG3-[5-50/0.1]
E-GCCG4-[5-50/0.1]
E-GCCG5-[10-60/0.1]
E-GCCG6-[10-100/0.1]
E-GCCG8-[10-100/0.1]
E-GCCG10-[15-100/0.1]
E-GCCG12-[15-150/0.1]
E-GCCG13-[25-150/0.1]
E-GCCG14-[25-150/0.1]
E-GCCG15-[25-150/0.1]
E-GCCG16-[30-150/0.1]
E-GCCG17-[30-150/0.1]
E-GCCG18-[30-150/0.1]
E-GCCG20-[30-150/0.1]
E-GCCG22-[30-150/0.1]
E-GCCG25-[30-150/0.1]
E-GSCCGH2-[5-30/0.1]
E-GSCCGH3-[5-50/0.1]
E-GSCCGH4-[5-50/0.1]
E-GSCCGH5-[10-60/0.1]
E-GSCCGH6-[10-100/0.1]
E-GSCCGH8-[10-100/0.1]
E-GSCCGH10-[15-100/0.1]
E-GSCCGH12-[15-150/0.1]
E-GSCCGH13-[25-150/0.1]

Standard Unit Price	Minimum order quantity	Days to Ship	Shaft Dia. D (mm)	Material	Hardness	Surface Treatment	Material Detail	L Dimension Tolerance (mm)
-	1 Piece(s)	7 Day(s)	2	Steel	Not Spec-designed	Black Oxide	General structural steel or carbon steel	5 ～ 30
-	1 Piece(s)	7 Day(s)	3	Steel	Not Spec-designed	Black Oxide	General structural steel or carbon steel	5 ～ 50
-	1 Piece(s)	7 Day(s)	4	Steel	Not Spec-designed	Black Oxide	General structural steel or carbon steel	5 ～ 50
-	1 Piece(s)	7 Day(s)	5	Steel	Not Spec-designed	Black Oxide	General structural steel or carbon steel	10 ～ 60
-	1 Piece(s)	7 Day(s)	6	Steel	Not Spec-designed	Black Oxide	General structural steel or carbon steel	10 ～ 100
-	1 Piece(s)	7 Day(s)	8	Steel	Not Spec-designed	Black Oxide	General structural steel or carbon steel	10 ～ 100
-	1 Piece(s)	7 Day(s)	10	Steel	Not Spec-designed	Black Oxide	General structural steel or carbon steel	15 ～ 100
-	1 Piece(s)	7 Day(s)	12	Steel	Not Spec-designed	Black Oxide	General structural steel or carbon steel	15 ～ 150
-	1 Piece(s)	7 Day(s)	13	Steel	Not Spec-designed	Black Oxide	General structural steel or carbon steel	25 ～ 150
-	1 Piece(s)	7 Day(s)	14	Steel	Not Spec-designed	Black Oxide	General structural steel or carbon steel	25 ～ 150
-	1 Piece(s)	7 Day(s)	15	Steel	Not Spec-designed	Black Oxide	General structural steel or carbon steel	25 ～ 150
-	1 Piece(s)	7 Day(s)	16	Steel	Not Spec-designed	Black Oxide	General structural steel or carbon steel	30 ～ 150
-	1 Piece(s)	7 Day(s)	17	Steel	Not Spec-designed	Black Oxide	General structural steel or carbon steel	30 ～ 150
-	1 Piece(s)	7 Day(s)	18	Steel	Not Spec-designed	Black Oxide	General structural steel or carbon steel	30 ～ 150
-	1 Piece(s)	7 Day(s)	20	Steel	Not Spec-designed	Black Oxide	General structural steel or carbon steel	30 ～ 150
-	1 Piece(s)	7 Day(s)	22	Steel	Not Spec-designed	Black Oxide	General structural steel or carbon steel	30 ～ 150
-	1 Piece(s)	7 Day(s)	25	Steel	Not Spec-designed	Black Oxide	General structural steel or carbon steel	30 ～ 150
-	1 Piece(s)	7 Day(s)	2	Steel	Hardness Requirement	Black Oxide	General structural steel or carbon steel	5 ～ 30
-	1 Piece(s)	7 Day(s)	3	Steel	Hardness Requirement	Black Oxide	General structural steel or carbon steel	5 ～ 50
-	1 Piece(s)	7 Day(s)	4	Steel	Hardness Requirement	Black Oxide	General structural steel or carbon steel	5 ～ 50
-	1 Piece(s)	7 Day(s)	5	Steel	Hardness Requirement	Black Oxide	General structural steel or carbon steel	10 ～ 60
-	1 Piece(s)	7 Day(s)	6	Steel	Hardness Requirement	Black Oxide	General structural steel or carbon steel	10 ～ 100
-	1 Piece(s)	7 Day(s)	8	Steel	Hardness Requirement	Black Oxide	General structural steel or carbon steel	10 ～ 100
-	1 Piece(s)	7 Day(s)	10	Steel	Hardness Requirement	Black Oxide	General structural steel or carbon steel	15 ～ 100
-	1 Piece(s)	7 Day(s)	12	Steel	Hardness Requirement	Black Oxide	General structural steel or carbon steel	15 ～ 150
-	1 Piece(s)	7 Day(s)	13	Steel	Hardness Requirement	Black Oxide	General structural steel or carbon steel	25 ～ 150
-	1 Piece(s)	7 Day(s)	14	Steel	Hardness Requirement	Black Oxide	General structural steel or carbon steel	25 ～ 150
-	1 Piece(s)	7 Day(s)	15	Steel	Hardness Requirement	Black Oxide	General structural steel or carbon steel	25 ～ 150
-	1 Piece(s)	7 Day(s)	16	Steel	Hardness Requirement	Black Oxide	General structural steel or carbon steel	30 ～ 150
-	1 Piece(s)	7 Day(s)	17	Steel	Hardness Requirement	Black Oxide	General structural steel or carbon steel	30 ～ 150
-	1 Piece(s)	7 Day(s)	18	Steel	Hardness Requirement	Black Oxide	General structural steel or carbon steel	30 ～ 150
-	1 Piece(s)	7 Day(s)	20	Steel	Hardness Requirement	Black Oxide	General structural steel or carbon steel	30 ～ 150
-	1 Piece(s)	7 Day(s)	22	Steel	Hardness Requirement	Black Oxide	General structural steel or carbon steel	30 ～ 150
-	1 Piece(s)	7 Day(s)	25	Steel	Hardness Requirement	Black Oxide	General structural steel or carbon steel	30 ～ 150
-	1 Piece(s)	7 Day(s)	2	Steel	Hardness Requirement	Hard Chrome Plating	General structural steel or carbon steel	5 ～ 30
-	1 Piece(s)	7 Day(s)	3	Steel	Hardness Requirement	Hard Chrome Plating	General structural steel or carbon steel	5 ～ 50
-	1 Piece(s)	7 Day(s)	4	Steel	Hardness Requirement	Hard Chrome Plating	General structural steel or carbon steel	5 ～ 50
-	1 Piece(s)	7 Day(s)	5	Steel	Hardness Requirement	Hard Chrome Plating	General structural steel or carbon steel	10 ～ 60
-	1 Piece(s)	7 Day(s)	6	Steel	Hardness Requirement	Hard Chrome Plating	General structural steel or carbon steel	10 ～ 100
-	1 Piece(s)	7 Day(s)	8	Steel	Hardness Requirement	Hard Chrome Plating	General structural steel or carbon steel	10 ～ 100
-	1 Piece(s)	7 Day(s)	10	Steel	Hardness Requirement	Hard Chrome Plating	General structural steel or carbon steel	15 ～ 100
-	1 Piece(s)	7 Day(s)	12	Steel	Hardness Requirement	Hard Chrome Plating	General structural steel or carbon steel	15 ～ 150
-	1 Piece(s)	7 Day(s)	13	Steel	Hardness Requirement	Hard Chrome Plating	General structural steel or carbon steel	25 ～ 150
-	1 Piece(s)	7 Day(s)	14	Steel	Hardness Requirement	Hard Chrome Plating	General structural steel or carbon steel	25 ～ 150
-	1 Piece(s)	7 Day(s)	15	Steel	Hardness Requirement	Hard Chrome Plating	General structural steel or carbon steel	25 ～ 150
-	1 Piece(s)	7 Day(s)	16	Steel	Hardness Requirement	Hard Chrome Plating	General structural steel or carbon steel	30 ～ 150
-	1 Piece(s)	7 Day(s)	17	Steel	Hardness Requirement	Hard Chrome Plating	General structural steel or carbon steel	30 ～ 150
-	1 Piece(s)	7 Day(s)	18	Steel	Hardness Requirement	Hard Chrome Plating	General structural steel or carbon steel	30 ～ 150
-	1 Piece(s)	7 Day(s)	20	Steel	Hardness Requirement	Hard Chrome Plating	General structural steel or carbon steel	30 ～ 150
-	1 Piece(s)	7 Day(s)	22	Steel	Hardness Requirement	Hard Chrome Plating	General structural steel or carbon steel	30 ～ 150
-	1 Piece(s)	7 Day(s)	25	Steel	Hardness Requirement	Hard Chrome Plating	General structural steel or carbon steel	30 ～ 150
-	1 Piece(s)	7 Day(s)	2	Stainless Steel	Hardness Requirement	Hard Chrome Plating	Martensite stainless steel	5 ～ 30
-	1 Piece(s)	7 Day(s)	3	Stainless Steel	Hardness Requirement	Hard Chrome Plating	Martensite stainless steel	5 ～ 50
-	1 Piece(s)	7 Day(s)	4	Stainless Steel	Hardness Requirement	Hard Chrome Plating	Martensite stainless steel	5 ～ 50
-	1 Piece(s)	7 Day(s)	5	Stainless Steel	Hardness Requirement	Hard Chrome Plating	Martensite stainless steel	10 ～ 60
-	1 Piece(s)	7 Day(s)	6	Stainless Steel	Hardness Requirement	Hard Chrome Plating	Martensite stainless steel	10 ～ 100
-	1 Piece(s)	7 Day(s)	8	Stainless Steel	Hardness Requirement	Hard Chrome Plating	Martensite stainless steel	10 ～ 100
-	1 Piece(s)	7 Day(s)	10	Stainless Steel	Hardness Requirement	Hard Chrome Plating	Martensite stainless steel	15 ～ 100
-	1 Piece(s)	7 Day(s)	12	Stainless Steel	Hardness Requirement	Hard Chrome Plating	Martensite stainless steel	15 ～ 150
-	1 Piece(s)	7 Day(s)	13	Stainless Steel	Hardness Requirement	Hard Chrome Plating	Martensite stainless steel	25 ～ 150

Basic Information

Mounting Method	Retaining Ring	Basic Shape	Straight	D Tolerance Selection	g7
Type	L configurable	Hex Socket	Not Provided

Configure

136 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Shaft Dia. D(mm)
2

3

4

5

6

8

10

12

13

14

15

16

17

18

20

22

25
Clear
Material
- Steel
- Stainless Steel
Clear
Hardness
- Not Spec-designed
- Hardness Requirement
Clear
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Hard Chrome Plating
Clear
Material Detail
Austenitic stainless steel

General structural steel or carbon steel

Martensite stainless steel
Clear
L Dimension Tolerance(mm)
[5-150/0.1mm Unit(s)]
Clear
type
- E-CCG
- E-CCGH
- E-GCCG
- E-GSCCGH
- E-PCCG
- E-PCCGH
- E-SCCG
- E-SCCGH
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

7 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Tech Support

: Technical Inquiry

Adjustment Screw Components Hex Socket on Head	Single Bearing Type with Retaining Ring Embedded	Packed Gasket Ring Fixed Gasket Ring

Representative model: ANB8-40	Representative model: BGRR6000ZZ	Representative model: PCIMR6-12-0.1
Advantages: manual adjustment and positioning, optional length	Advantages: full range, high precision	Advantages: full range, high precision and high quality

For anti-rust performance and maintenance of metal materials and surface treatment, click	Anti-Rust Performance Table
For JIS engineering specifications of the accessory retaining ring, click	Retaining Ring Specifications

How can we improve?

Pivot Pins Straight, Retaining Ring

Part Number

Basic Information

Configure

Specification/Dimensions

Shaft Dia. D(mm)

Material

Hardness

Surface Treatment

Material Detail

L Dimension Tolerance(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm