(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Economy Metal Washer – Standard Grade, Selectable ID/OD Tolerance Type (Part Numbers)
Part Number
Configured Part Number is shown.
Product Overview
It is generally used as a component that is cushioned at the workpiece connector and plays a role of precise adjustment of the clearance on the cushioned part.
It can also be used to protect the surface of the connected part from being scratched by the nut and disperse the pressure generated by the nut on the connected part.
It can also be used to protect the surface of the connected part from being scratched by the nut and disperse the pressure generated by the nut on the connected part.
Dimensional Drawing
Material Table
・Material Specification table
| Part Number |  Material |  Surface Treatment | D (mm) | V (mm) | T (mm) | |
| Normal | Precision | |||||
| E-SWSC | E-SWMC | General structural steel or carbon steel | - | 5 to 60 | 3 to 58 | 1 to 10 |
| E-SWSB | E-SWMB | Black Oxide Film | ||||
| E-SWSM | E-SWMM | Electroless Nickel Plating | ||||
| E-SWSS | E-SWMS | SUS304 Equivalent | - | |||
Specification Table
■ D Tolerance Selection
| D |  D tolerance selection | |||
| G | H | N | X | |
| g6 | h7 | - | - | |
| 5.0 to 8.5 | - | - | - 0.1- 0.3 | 0- 0.2 |
| 9.0 to 10.0 | - 0.005 | 0 | ||
| - 0.014 | - 0.015 | |||
| 10.5 to 18.0 | - 0.006 | 0 | ||
| - 0.017 | - 0.018 | |||
| 18.5 to 30 | - 0.007 | 0 | ||
| - 0.020 | - 0.021 | |||
| 31 to 50 | - 0.009 | 0 | ||
| - 0.025 | - 0.025 | |||
| 51 to 60 | - 0.010 | 0 | ||
| - 0.029 | -0.030 | |||
■ V Tolerance Selection
| V | V Tolerance Selection | ||
| H | N | X | |
| H7 | - | - | |
| 3.0 | +0.010 | + 0.3 + 0.1 | +0.2 0 |
| 0 | |||
| 3.5 to 6.0 | +0.012 | ||
| 0 | |||
| 6.5 to 10.0 | +0.015 | ||
| 0 | |||
| 10.5 to 18.0 | +0.018 | ||
| 0 | |||
| 18.5 to 30.0 | +0.021 | ||
| 0 | |||
| 30.5 to 50.0 | +0.025 | ||
| 0 | |||
| 50.5 to 58.0 | +0.030 | ||
| 0 | |||
 Part Number |  D toleranceSelection |  V ToleranceSelect |  D |  VCan be specified down to 0.5mm increments |  TCan be specified down to 0.1 mm increments | |||||||||
| E-SWSC E-SWSB E-SWSM E-SWSS E-SWMC E-SWMB E-SWMM E-SWMS | G H N X | H N X | 5.0 to 10.0 Unit: 0.5 mm | 3.0 to 58.0 (V ≤ D—2)  See below | 1.0 to 2.9 | |||||||||
| 3.0 to 5.0 | ||||||||||||||
| 5.1 to 10.0 | ||||||||||||||
| 10.5 to 20.0 Unit: 0.5 mm | 1.0 to 2.9 | |||||||||||||
| 3.0 to 5.0 | ||||||||||||||
| 5.1 to 10.0 | ||||||||||||||
| 21 to 30 Unit: 1 mm | 1.0 to 2.9 | |||||||||||||
| 3.0 to 5.0 | ||||||||||||||
| 5.1 to 10.0 | ||||||||||||||
| 31-40 Unit: 1 mm | 1.0 to 2.9 | |||||||||||||
| 3.0 to 5.0 | ||||||||||||||
| 5.1 to 10.0 | ||||||||||||||
| 41-50 Unit: 1 mm | 1.0 to 2.9 | |||||||||||||
| 3.0 to 5.0 | ||||||||||||||
| 5.1 to 10.0 | ||||||||||||||
| 51-60 Unit: 1 mm | 1.0 to 2.9 | |||||||||||||
| 3.0 to 5.0 | ||||||||||||||
| 5.1 to 10.0 | ||||||||||||||
| SWSS Type T ≥ 3 | When D·V tolerance is set to G or H, it applies to D ≥ 9. At this time, the specified range of V is shown in the table below.
| |||||||||||||
Product Features
Feature 1: Wide range of options for inner and outer diameters and thickness; thickness can be specified in 0.1 mm increments.
Feature 2: High-precision products manufactured by cutting processes enable precise spatial adjustment.
Feature 3: Compared with standard washers, metal washers will not be dented after the connected part is screwed in due to the locking, and cause the bolts to loosen.
Feature 4: Compared with standard stamped washers, metal washers increase the friction with the mounting part, which can prevent loosening.
Feature 2: High-precision products manufactured by cutting processes enable precise spatial adjustment.
Feature 3: Compared with standard washers, metal washers will not be dented after the connected part is screwed in due to the locking, and cause the bolts to loosen.
Feature 4: Compared with standard stamped washers, metal washers increase the friction with the mounting part, which can prevent loosening.
Usage Method
Precautions
(1) When D ≤ 16, chamfer C is ≤ 0.2
When D ≥ 16.5, chamfer C is ≤ 0.5
(2) The metal washer is a turned product, not a stamped part.
(3) When the relative humidity of the operating environment is high and certain anti-rust ability is required, please choose products with electroless nickel plating surface treatment or stainless steel SUS3 series materials.
(4) When the operating environment requires certain abrasion resistance and hardness for metal washers, please give priority to metal washer quenched products.
When D ≥ 16.5, chamfer C is ≤ 0.5
(2) The metal washer is a turned product, not a stamped part.
(3) When the relative humidity of the operating environment is high and certain anti-rust ability is required, please choose products with electroless nickel plating surface treatment or stainless steel SUS3 series materials.
(4) When the operating environment requires certain abrasion resistance and hardness for metal washers, please give priority to metal washer quenched products.
Example of Use
Related Documents
Application Industries
| Smart phone | Electronic & Electrical Appliances | Lithium battery | ||
 |  |  | ||
| Automotive | Robotics | Medical | ||
 |  |  |
Related Products
| Ultra short head hex socket bolt | Adjustment Screw Components Hex Head Stud | Axle Pin Bolt | ||
 |  |  | ||
| Typical model: CBSA6-12 | Typical model: ANH4-20 | Typical model: DBTS6-3-10 | ||
| Advantages: space saving, sufficient stock | Advantages: Hardened tip, optional length | Advantages: Accurate positioning, high shaft precision |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-SWMS-XN-D[5-20/0.5]-V[3-58/0.5]-T[3.1-10/0.1] |
| E-SWMS-XN-D[21-60/1]-V[3-58/0.5]-T[3.1-10/0.1] |
| E-SWMS-XX-D[5-20/0.5]-V[3-58/0.5]-T[3.1-10/0.1] |
| E-SWMS-XX-D[21-60/1]-V[3-58/0.5]-T[3.1-10/0.1] |
| E-SWSB-GH-D[9-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-GH-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-GN-D[9-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-GN-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-GX-D[9-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-GX-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-HH-D[9-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-HH-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-HN-D[9-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-HN-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-HX-D[9-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-HX-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-NH-D[5-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-NH-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-NN-D[4-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-NN-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-NX-D[4-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-NX-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-XH-D[5-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-XH-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-XN-D[4-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-XN-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-XX-D[4-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSB-XX-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-GH-D[9-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-GH-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-GN-D[9-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-GN-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-GX-D[9-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-GX-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-HH-D[9-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-HH-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-HN-D[9-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-HN-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-HX-D[9-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-HX-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-NH-D[5-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-NH-D[21-60/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-NN-D[4-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-NN-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-NX-D[4-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-NX-D[21-60/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-XH-D[5-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-XH-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-XN-D[4-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-XN-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-XX-D[4-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSC-XX-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSM-GH-D[9-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSM-GH-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSM-GN-D[9-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSM-GN-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSM-GX-D[9-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSM-GX-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSM-HH-D[9-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSM-HH-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSM-HN-D[9-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSM-HN-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSM-HX-D[9-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSM-HX-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSM-NH-D[5-20/0.5]-V[3-58/0.5]-T[3-10/0.1] |
| E-SWSM-NH-D[21-50/1]-V[3-58/0.5]-T[3-10/0.1] |
| E-SWSM-NN-D[4-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSM-NN-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSM-NX-D[4-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSM-NX-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSM-XH-D[5-20/0.5]-V[3-90/0.5]-T[1-10/0.1] |
| E-SWSM-XH-D[21-60/1]-V[3-90/0.5]-T[1-10/0.1] |
| E-SWSM-XN-D[4-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSM-XN-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSM-XX-D[4-20/0.5]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSM-XX-D[21-50/1]-V[3-58/0.5]-T[1-10/0.1] |
| E-SWSS-GH-D[9-20/0.5]-V[3-58/0.5]-T[3-10/0.1] |
| E-SWSS-GH-D[21-40/1]-V[3-58/0.5]-T[3-10/0.1] |
| E-SWSS-GN-D[9-20/0.5]-V[3-58/0.5]-T[3-10/0.1] |
| E-SWSS-GN-D[21-40/1]-V[3-58/0.5]-T[3-10/0.1] |
| E-SWSS-GX-D[9-20/0.5]-V[3-58/0.5]-T[3-10/0.1] |
| E-SWSS-GX-D[21-40/1]-V[3-58/0.5]-T[3-10/0.1] |
| E-SWSS-HH-D[9-20/0.5]-V[3-58/0.5]-T[3-10/0.1] |
| E-SWSS-HH-D[21-40/1]-V[3-58/0.5]-T[3-10/0.1] |
| E-SWSS-HN-D[9-20/0.5]-V[3-58/0.5]-T[3-10/0.1] |
| E-SWSS-HN-D[21-40/1]-V[3-58/0.5]-T[3-10/0.1] |
| E-SWSS-HX-D[9-20/0.5]-V[3-58/0.5]-T[3-10/0.1] |
| E-SWSS-HX-D[21-40/1]-V[3-58/0.5]-T[3-10/0.1] |
| E-SWSS-NH-D[5-20/0.5]-V[3-58/0.5]-T[3-10/0.1] |
| E-SWSS-NH-D[21-40/1]-V[3-58/0.5]-T[3-10/0.1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Material | Surface Treatment | I.D. Tolerance | Thickness / Length Tolerance | O.D. Tolerance | Accuracy | Size Specified Method |
|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 7 Day(s) | [Stainless Steel] SUS304 Equivalent | Not Provided | +0.3~+0.1 | ±0.01 | 0~-0.2 | Precision Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Stainless Steel] SUS304 Equivalent | Not Provided | +0.3~+0.1 | ±0.01 | 0~-0.2 | Precision Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Stainless Steel] SUS304 Equivalent | Not Provided | +0.2~0 | ±0.01 | 0~-0.2 | Precision Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Stainless Steel] SUS304 Equivalent | Not Provided | +0.2~0 | ±0.01 | 0~-0.2 | Precision Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | H7 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | H7 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | +0.3~+0.1 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | +0.3~+0.1 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | +0.2~0 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | +0.2~0 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | H7 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | H7 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | +0.3~+0.1 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | +0.3~+0.1 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | +0.2~0 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | +0.2~0 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | H7 | ±0.1 | -0.1~-0.3 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | H7 | ±0.1 | -0.1~-0.3 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | +0.3~+0.1 | ±0.1 | -0.1~-0.3 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | +0.3~+0.1 | ±0.1 | -0.1~-0.3 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | +0.2~0 | ±0.1 | -0.1~-0.3 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | +0.2~0 | ±0.1 | -0.1~-0.3 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | H7 | ±0.1 | 0~-0.2 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | H7 | ±0.1 | 0~-0.2 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | +0.3~+0.1 | ±0.1 | 0~-0.2 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | +0.3~+0.1 | ±0.1 | 0~-0.2 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | +0.2~0 | ±0.1 | 0~-0.2 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Black Oxide | +0.2~0 | ±0.1 | 0~-0.2 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | H7 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | H7 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | +0.3~+0.1 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | +0.3~+0.1 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | +0.2~0 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | +0.2~0 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | H7 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | H7 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | +0.3~+0.1 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | +0.3~+0.1 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | +0.2~0 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | +0.2~0 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | H7 | ±0.1 | -0.1~-0.3 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | H7 | ±0.1 | -0.1~-0.3 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | +0.3~+0.1 | ±0.1 | -0.1~-0.3 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | +0.3~+0.1 | ±0.1 | -0.1~-0.3 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | +0.2~0 | ±0.1 | -0.1~-0.3 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | +0.2~0 | ±0.1 | -0.1~-0.3 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | H7 | ±0.1 | 0~-0.2 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | H7 | ±0.1 | 0~-0.2 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | +0.3~+0.1 | ±0.1 | 0~-0.2 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | +0.3~+0.1 | ±0.1 | 0~-0.2 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | +0.2~0 | ±0.1 | 0~-0.2 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Not Provided | +0.2~0 | ±0.1 | 0~-0.2 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | H7 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | H7 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | +0.3~+0.1 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | +0.3~+0.1 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | +0.2~0 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | +0.2~0 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | H7 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | H7 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | +0.3~+0.1 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | +0.3~+0.1 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | +0.2~0 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | +0.2~0 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | H7 | ±0.1 | -0.1~-0.3 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | H7 | ±0.1 | -0.1~-0.3 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | +0.3~+0.1 | ±0.1 | -0.1~-0.3 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | +0.3~+0.1 | ±0.1 | -0.1~-0.3 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | +0.2~0 | ±0.1 | -0.1~-0.3 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | +0.2~0 | ±0.1 | -0.1~-0.3 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | H7 | ±0.1 | 0~-0.2 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | H7 | ±0.1 | 0~-0.2 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | +0.3~+0.1 | ±0.1 | 0~-0.2 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | +0.3~+0.1 | ±0.1 | 0~-0.2 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | +0.2~0 | ±0.1 | 0~-0.2 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Steel] General Structural Steel or Carbon Steel | Electroless Nickel Plating | +0.2~0 | ±0.1 | 0~-0.2 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Stainless Steel] SUS304 Equivalent | Not Provided | H7 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Stainless Steel] SUS304 Equivalent | Not Provided | H7 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Stainless Steel] SUS304 Equivalent | Not Provided | +0.3~+0.1 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Stainless Steel] SUS304 Equivalent | Not Provided | +0.3~+0.1 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Stainless Steel] SUS304 Equivalent | Not Provided | +0.2~0 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Stainless Steel] SUS304 Equivalent | Not Provided | +0.2~0 | ±0.1 | g6 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Stainless Steel] SUS304 Equivalent | Not Provided | H7 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Stainless Steel] SUS304 Equivalent | Not Provided | H7 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Stainless Steel] SUS304 Equivalent | Not Provided | +0.3~+0.1 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Stainless Steel] SUS304 Equivalent | Not Provided | +0.3~+0.1 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Stainless Steel] SUS304 Equivalent | Not Provided | +0.2~0 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Stainless Steel] SUS304 Equivalent | Not Provided | +0.2~0 | ±0.1 | h7 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Stainless Steel] SUS304 Equivalent | Not Provided | H7 | ±0.1 | -0.1~-0.3 | Standard Grade | Custom dimensions | ||
- | 1 Piece(s) | 7 Day(s) | [Stainless Steel] SUS304 Equivalent | Not Provided | H7 | ±0.1 | -0.1~-0.3 | Standard Grade | Custom dimensions |
Loading...
Basic Information
| I.D. Shape | Straight | Unit of Purchase | Single Item | Hardness(HRC) | Without Quenching |
|---|
Specification/Dimensions
-
Material
- Steel
- Stainless Steel
- Steel
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
-
I.D. Tolerance
-
Thickness / Length Tolerance
-
O.D. Tolerance
-
Accuracy
- Precision Grade
- Standard Grade
-
Size Specified Method
-
type
- E-SWMB-GH
- E-SWMB-GN
- E-SWMB-GX
- E-SWMB-HH
- E-SWMB-HN
- E-SWMB-HX
- E-SWMB-NH
- E-SWMB-NN
- E-SWMB-NX
- E-SWMB-XH
- E-SWMB-XN
- E-SWMB-XX
- E-SWMC-GH
- E-SWMC-GN
- E-SWMC-GX
- E-SWMC-HH
- E-SWMC-HN
- E-SWMC-HX
- E-SWMC-NH
- E-SWMC-NN
- E-SWMC-NX
- E-SWMC-XH
- E-SWMC-XN
- E-SWMC-XX
- E-SWMM-GH
- E-SWMM-GN
- E-SWMM-GX
- E-SWMM-HH
- E-SWMM-HN
- E-SWMM-HX
- E-SWMM-NH
- E-SWMM-NN
- E-SWMM-NX
- E-SWMM-XH
- E-SWMM-XN
- E-SWMM-XX
- E-SWMS-GH
- E-SWMS-GN
- E-SWMS-GX
- E-SWMS-HH
- E-SWMS-HN
- E-SWMS-NH
- E-SWMS-NN
- E-SWMS-NX
- E-SWMS-XH
- E-SWMS-XN
- E-SWMS-XX
- E-SWSB-GH
- E-SWSB-GN
- E-SWSB-GX
- E-SWSB-HH
- E-SWSB-HN
- E-SWSB-HX
- E-SWSB-NH
- E-SWSB-NN
- E-SWSB-NX
- E-SWSB-XH
- E-SWSB-XN
- E-SWSB-XX
- E-SWSC-GH
- E-SWSC-GN
- E-SWSC-GX
- E-SWSC-HH
- E-SWSC-HN
- E-SWSC-HX
- E-SWSC-NH
- E-SWSC-NN
- E-SWSC-NX
- E-SWSC-XH
- E-SWSC-XN
- E-SWSC-XX
- E-SWSM-GH
- E-SWSM-GN
- E-SWSM-GX
- E-SWSM-HH
- E-SWSM-HN
- E-SWSM-HX
- E-SWSM-NH
- E-SWSM-NN
- E-SWSM-NX
- E-SWSM-XH
- E-SWSM-XN
- E-SWSM-XX
- E-SWSS-GH
- E-SWSS-GN
- E-SWSS-GX
- E-SWSS-HH
- E-SWSS-HN
- E-SWSS-HX
- E-SWSS-NH
- E-SWSS-NN
- E-SWSS-NX
- E-SWSS-XH
- E-SWSS-XN
- E-SWSS-XX
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 7 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy