(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Simple Strut Clamps Equal Dia, Hole Perpendicular (E-ALKC6)
- Volume Discount
MiSUMi Economy
This is an economy item, The price is cheaper than the MISUMI standard product.
Part Number
Configured Part Number is shown.
E-ALKC6
Product Overview
Threaded holes can be machined on the pillar mounting clamp to enable vertical or parallel installation, allowing instruments to be mounted directly onto the pillar mounting clamp.
By using the post clamp, the height, width, and angle can be adjusted to fix it in a certain position.
By using the post clamp, the height, width, and angle can be adjusted to fix it in a certain position.
Dimensional Drawing
Specification Overview
・Material Specification table
■ Accessory Bolt Same Diameter Orthogonal Type
■ Accessory Bolt, Reducer Cross Type
If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating or those made of austenitic stainless steel SUS3 series. Please refer to 
here for antirust methods
| Type |  Material |  Surface Treatment |  Accessories | |
| Equal Diameter | Reducer | |||
| E-ALKC | E-ALNC | Aluminum | Black Anodized | Hexagon socket head bolt |
| E-ALKW | - | Clear Anodized | ||
■ Accessory Bolt Same Diameter Orthogonal Type
| D | Supplied Bolt | |
| 6 | M3-6 | 2 pcs |
| 8 | M3-8 | |
| 10 | M4-10 | |
| 12 | M4-12 | |
| 15 | M5-15 | |
■ Accessory Bolt, Reducer Cross Type
| D | D1 | Supplied Bolt | |
| 10 | 8 | M3-8·M4-10 | 1 pcs each |
| 12 | 10 | M3-10·M4-12 | |
| 15 | 12 | M4-12·M5-15 | |
If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating or those made of austenitic stainless steel SUS3 series. Please refer to 
here for antirust methodsSpecification Table
■ Same Diameter Perpendicular Type
■ Unequal Diameter Perpendicular Type
DH8·D1H8 tolerance and perpendicularity are the tolerances before slotting.
It is recommended to use g6 or f8 tolerances for mating shafts. Additionally, it is recommended to use an extended wrench when tightening.
| Part Number | B | L | L1 | L2 | r | P1 | P2 | m | Counterbored Hole Type | W | ||||
| Type | DH8 | d1 | d2 | f | ||||||||||
| E-ALKC E-ALKW | 6 | +0.022 0 | 10 | 29 | 10.5 | 8 | 5 | 6.5 | 6.5 | M3 | 6.5 | 3.5 | 3.5 | 1 |
| 8 | +0.022 0 | 12 | 32 | 11 | 10 | 6 | 7 | 7 | ||||||
| 10 | 16 | 39 | 13.5 | 12 | 8 | 8.5 | 8.5 | M4 | 8 | 4.5 | 4.5 | 1.5 | ||
| 12 | +0.027 0 | 18 | 43 | 14 | 15 | 9 | 9 | 9 | ||||||
| 15 | 22 | 54 | 18 | 18 | 11 | 11.5 | 11.5 | M5 | 9.5 | 5.5 | 5.5 | |||
■ Unequal Diameter Perpendicular Type
| Part Number | D1H8 | B | B1 | L | L1 | L2 | r | r1 | P1 | P2 | m | Counterbored Hole Type | W | m1 | Counterbored Hole Type | W1 | |||||||
| Type | DH8 | d1 | d2 | f | d3 | d4 | f1 | ||||||||||||||||
| E-ALNC | 10 | +0.022 0 | 8 | +0.022 0 | 16 | 12 | 36.5 | 13.5 | 12 | 6 | 8 | 8.5 | 7 | M4 | 8 | 4.5 | 4.5 | 1.5 | M3 | 6.5 | 3.5 | 3.5 | 1 |
| 12 | +0.027 0 | 10 | 18 | 14 | 39.5 | 14 | 14 | 7 | 9 | 9 | 7.5 | M4 | 8 | 4.5 | 4.5 | 1.5 | M3 | 6.5 | 3.5 | 3.5 | 1.5 | ||
| 15 | 12 | +0.027 0 | 22 | 18 | 48.5 | 18 | 16 | 9 | 11 | 11.5 | 9 | M5 | 9.5 | 5.5 | 5.5 | 1.5 | M4 | 8 | 4.5 | 4.5 | 1.5 | ||
DH8·D1H8 tolerance and perpendicularity are the tolerances before slotting.It is recommended to use g6 or f8 tolerances for mating shafts. Additionally, it is recommended to use an extended wrench when tightening.Product Features
Feature 1: MISUMI brand pillar fixing clamps provide ultra-high locking force with high precision, securing the pillar firmly to prevent rotation or loosening.
Feature 2: This model of support fixing clamp allows for free adjustment in the vertical direction (height) and horizontal direction (detection position), making on-site adjustment easy.
Feature 3: The material of this model's support fixing clamp is A6061, which has excellent corrosion resistance, and its surface is anodized for an attractive appearance.
Feature 2: This model of support fixing clamp allows for free adjustment in the vertical direction (height) and horizontal direction (detection position), making on-site adjustment easy.
Feature 3: The material of this model's support fixing clamp is A6061, which has excellent corrosion resistance, and its surface is anodized for an attractive appearance.
Usage Method
Precautions
1. When tightening, it is recommended to use an extended wrench.
2. If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating or those made of austenitic stainless steel SUS3 series. For rust prevention methods, please refer tohere
3. The shaft hole tolerance is H8. It is recommended to use a shaft or pillar with g6 or f8 tolerance.
2. If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating or those made of austenitic stainless steel SUS3 series. For rust prevention methods, please refer to
here3. The shaft hole tolerance is H8. It is recommended to use a shaft or pillar with g6 or f8 tolerance.
Example of Use
■ Organization Name
Direction Determination Mechanism.
■ Mechanism Function
Changes the direction of the workpiece.
Can be freely adjusted along the X, Y, and Z directions.
Determine the orientation of the workpiece using a vision sensor.
Images can also be processed.
■ Function of the Support Fixing Clamp
The support fixing clamp is used together with the mounting base, allowing free adjustment and enabling the direction of the workpiece to be determined by a vision sensor.
For detailed information, please clickDirection Judging Mechanism
Direction Determination Mechanism.
■ Mechanism Function
Changes the direction of the workpiece.
Can be freely adjusted along the X, Y, and Z directions.
Determine the orientation of the workpiece using a vision sensor.
Images can also be processed.
■ Function of the Support Fixing Clamp
The support fixing clamp is used together with the mounting base, allowing free adjustment and enabling the direction of the workpiece to be determined by a vision sensor.
For detailed information, please click
Direction Judging MechanismApplication Industries
| Smart phone | Electronic & Electrical Appliances | Lithium battery | ||
 |  |  | ||
| Automotive | Robotics | Medical | ||
 |  |  |
Related Products
| Mounting Base, Medium Precision / Round Flange Type | (Economy series) Shaft support T-type lightweight space-saving slit | (Economy series) Post for tension spring Groove type Male thread type | ||
 |  |  | ||
| Typical model: C-CSTNH10-90 | Typical model: C-SHA10 | Typical model: C-BSPO6-25 |
Related Documents
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Basic Information
| Material | A6063 | Type | Perpendicular | Post Shape | Round Flange Type |
|---|
Please check the type/dimensions/specifications of the part E-ALKC6 in the Simple Strut Clamps Equal Dia, Hole Perpendicular series.
Specification/Dimensions
-
Post Dia. 2(mm)
-
type
- E-ALKC
- E-ALKW
- E-ALNC
-
Post Dia.(mm)
-
Combined-Post Dia.
- Equal Dia.
- Unequal Dia.
-
Surface Treatment
- Clear Anodizing
- Black Anodizing
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| E-ALKC10 |
| E-ALKC12 |
| E-ALKC15 |
| E-ALKC8 |
| E-ALKW10 |
| E-ALKW12 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Post Dia. (mm) | Combined-Post Dia. | Surface Treatment | Post Dia. 2 (mm) |
|---|---|---|---|---|---|---|---|---|
MYR 40.92 | 1 Piece(s) | Available | 6 Day(s) | 10 | Equal Dia. | Black Anodizing | - | |
MYR 48.03 | 1 Piece(s) | Available | 6 Day(s) | 12 | Equal Dia. | Black Anodizing | - | |
MYR 51.01 | 1 Piece(s) | Available | 6 Day(s) | 15 | Equal Dia. | Black Anodizing | - | |
MYR 33.47 | 1 Piece(s) | Available | 6 Day(s) | 8 | Equal Dia. | Black Anodizing | - | |
MYR 38.25 | 1 Piece(s) | Available | 6 Day(s) | 10 | Equal Dia. | Clear Anodizing | - | |
MYR 43.05 | 1 Piece(s) | Available | 6 Day(s) | 12 | Equal Dia. | Clear Anodizing | - |
Additional Products in this Category
- Strut Clamps - Unequal Dia., Perpendicular Configuration, Hole Pitch Selectable
- [Clean & Pack]Strut Clamps - Equal Dia., Perpendicular Configuration / Reversed
- [Clean & Pack]Strut Clamps - Square / Round Hole, Rotation
- T Type Clamp for Connecting Clamps (CC60TC)
- Round Pipe Joint, Same Diameter Hole Model, 45° Diagonal Mount Support
- Round Pipe Joint Same-Diameter Hole Type with 90° Cross Hole (2 Point Top- and-Bottom Fastening)
- Round Pipe Joint Same-Diameter Hole Type 2-Split, 2 Parallel Shaft Holes
- MARU-PIJON, Same Diameter Hole Type Two- Split Cross, ø6 to ø20
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy