(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Polyurethane Plate, Dimension Configuable
Part Number
Configured Part Number is shown.
Product Overview
Length and width, as well as hole processing, can be freely specified within the specification range. Both adhesive and non-adhesive types are available.
Dimensional Drawing
 | ■ Dimension Tolerance Table
| ■ Hole Machining Size Table |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Specification Overview
 A·B dimension configurable |  Material |  Hardness | Color | |
| Without Packing | With seal | |||
| E-UTSSN | E-UTSSNA | Polyether Polyurethane | Shore A95 | Natural |
| E-UTSHN | E-UTSHNA | Shore A90 | ||
| E-UTSM | E-UTSMA | Ester Urethane | Shore A70 | |
| E-UTSL | E-UTSLA | Shore A50 | ||
| E-UTSLL | E-UTSLLA | Shore A30 | ||
For products with adhesive type T4 or above, the adhesive tape may peel off due to its own weight. Please use for temporary fixing, or secure with bolts at the same time. When using the adhesive type, please make sure the mating part is clean, free of oil and dust, and flat. Polyurethane will yellow over time, but its properties will not change. Please be careful when using.■ Electrostatic Polyurethane Properties
| Volume Resistivity | 2.1 × 108Ω·cm |
| Surface Resistivity | 4.0 × 109Ω |
Other characteristics are the same as polyurethane of the same hardness.Hole Machining Conditions
| Through Hole |  | b1 Distance from hole to end face | 2.5 mm or more |
| b2 Distance from hole to end face | 5.0 mm or More | ||
| Counterbored Hole |  | b1 Distance from hole to end face | 2.5 mm or more |
| b2 Distance from hole to end face | 5.0 mm or More |
Alteration
Specification Table
■ A/B Dimension Specified Type - Standard Type
T (0.5) is only for E-UTSHN·E-UTSHNA
A ≥ B ≥ T
■ A/B Size Specification Type - Hole Machining Type
T (0.5) applies only to E-UTSHN and E-UTSHNA.
A ≥ B ≥ T
For the selection range of F dimension, when selecting type 1H, the following must be satisfied: d (d1)/2+2.5 ≤ F ≤ A—d (d1)/2-2.5; when selecting types 2H or 4H, the following must be satisfied: d (d1)+5 ≤ F ≤ A-d (d1)-5; when selecting types 3H or 6H, the following must be satisfied: d (d1)+5 ≤ F ≤ A/2-d (d1)/2-2.5
For the selection range of G dimension, when selecting types 1H, 2H, or 3H, the following must be satisfied: d (d1)/2+2.5 ≤ G ≤ B-d (d1)/2-2.5; when selecting types 4H or 6H, the following must be satisfied: d (d1)+5 ≤ G ≤ B-d (d1)-5 (select d for through hole, select d1 for counterbore)
| Part Number | Can be specified down to 1 mm increments | ||||
| Type |  T |  A |  B | ||
| Non-sealed type E-UTSSN E-UTSHN E-UTSM E-UTSL E-UTSLL | With Seal Type E-UTSSNA E-UTSHNA E-UTSMA E-UTSLA E-UTSLLA | (Shore A95) (Shore A90) (Shore A70) (Shore A50) (Shore A30) | (0.5) | 10 to 500 | 10 to 500 |
| 1 | |||||
| 2 | |||||
| 3 | |||||
| 4 | |||||
| 5 | |||||
| 6 | |||||
| 8 | |||||
| 10 | |||||
| 15 | |||||
| 20 | |||||
| 25 | |||||
| 30 | |||||
T (0.5) is only for E-UTSHN·E-UTSHNA A ≥ B ≥ T■ A/B Size Specification Type - Hole Machining Type
| Part Number | Specified unit: 1 mm (A ≥ B ≥ T) | Can be specified down to 0.5mm increments |  Bolt nominal diameter selection | ||||||||||||
| Type |  Nominal model | T | A | B |  F |  G | N (Through Hole) | Z (Counterbore) | |||||||
| Non-sealed type E-UTSSN E-UTSHN E-UTSM E-UTSL E-UTSLL | With Seal Type E-UTSSNA E-UTSHNA E-UTSMA E-UTSLA E-UTSLLA | (Shore A95) (Shore A90) (Shore A70) (Shore A50) (Shore A30) | 1H 2H 3H 4H 6H | (0.5) | 25 to 500 | 25 to 500 | 9 to 491 (Type 1H, 2H, 4H) 9 to 245 (3H, 6H type) | 5 to 495 (Type 1H, 2H, 3H) 9 to 491 (4H, 6H type) | 3 4 5 6 8 10 | - | |||||
| 1 | - | ||||||||||||||
| 2 | - | ||||||||||||||
| 3 | - | ||||||||||||||
| 4 | - | ||||||||||||||
| 5 | - | ||||||||||||||
| 6 | - | ||||||||||||||
| 8 | 3 | ||||||||||||||
| 10 | 3 | 4 | |||||||||||||
| 15 | 4 | 5 | 6 | 8 | |||||||||||
| 20 | 4 | 5 | 6 | 8 | |||||||||||
| 25 | 4 | 5 | 6 | 8 | 10 | ||||||||||
| 30 | 4 | 5 | 6 | 8 | 10 | ||||||||||
T (0.5) applies only to E-UTSHN and E-UTSHNA. A ≥ B ≥ T For the selection range of F dimension, when selecting type 1H, the following must be satisfied: d (d1)/2+2.5 ≤ F ≤ A—d (d1)/2-2.5; when selecting types 2H or 4H, the following must be satisfied: d (d1)+5 ≤ F ≤ A-d (d1)-5; when selecting types 3H or 6H, the following must be satisfied: d (d1)+5 ≤ F ≤ A/2-d (d1)/2-2.5 For the selection range of G dimension, when selecting types 1H, 2H, or 3H, the following must be satisfied: d (d1)/2+2.5 ≤ G ≤ B-d (d1)/2-2.5; when selecting types 4H or 6H, the following must be satisfied: d (d1)+5 ≤ G ≤ B-d (d1)-5 (select d for through hole, select d1 for counterbore)Product Features
Feature 1: Compared to rubber, polyurethane offers a wider range of hardness options and is softer and more elastic, allowing it to conform to curved workpiece surfaces.
Feature 2: Polyurethane has excellent mechanical strength and is often used as a mechanical stopper.
Feature 3: Less likely to transmit vibration and sound.
Feature 4: Polyurethane has low dust generation, and since it does not contain carbon, it is a material that is not prone to color transfer. (*Natural color only)
■ Hardness Table
Feature 2: Polyurethane has excellent mechanical strength and is often used as a mechanical stopper.
Feature 3: Less likely to transmit vibration and sound.
Feature 4: Polyurethane has low dust generation, and since it does not contain carbon, it is a material that is not prone to color transfer. (*Natural color only)
■ Hardness Table
| Shaw | A95 | A90 | A70 | A50 | A30 |
| Urethane | ● | ● | ● | ● | ● |
| Nitrile Rubber | × | × | ● | ● | × |
| Chloroprene | × | × | ● | × | × |
| EPDM Rubber | × | × | ● | × | × |
| Silicone Rubber | × | × | ● | ● | × |
| Fluororubber | × | × | ● | × | × |
| Butyl Rubber | × | × | ● | × | × |
Precautions
(1) About urethane discoloring
Urethane will darken its color by absorbing UV rays or illuminating light. This phenomenon is called yellowing. But it does not affect its physical properties, please fully understand when using it.
(2) Hydrolysis characteristics of urethane
If urethane is used for a long time in a moist or humid environment, it will be hydrolyzed and deteriorated.
It is recommended to manage the temperature and humidity of the warehouse and operating environment in areas with high humidity to extend the service life of the product.
Urethane will darken its color by absorbing UV rays or illuminating light. This phenomenon is called yellowing. But it does not affect its physical properties, please fully understand when using it.
| New urethane | Yellowed urethane |
 |  |
(2) Hydrolysis characteristics of urethane
If urethane is used for a long time in a moist or humid environment, it will be hydrolyzed and deteriorated.
It is recommended to manage the temperature and humidity of the warehouse and operating environment in areas with high humidity to extend the service life of the product.
(3) Changes in the state of the product after hydrolysis
· The polyurethane surface becomes sticky
· Irreversible marks are left when pressed lightly with a fingernail
· Polyurethane hardness decreases
· Polyurethane dries and cracks, easily disintegrating into powder
· The polyurethane surface becomes sticky
· Irreversible marks are left when pressed lightly with a fingernail
· Polyurethane hardness decreases
· Polyurethane dries and cracks, easily disintegrating into powder
| Hydrolyzed urethane |
 |
(4) Urethane dimension change
Urethane dimension will change with the surrounding temperature, but the amount of change is not large, and it can be restored to its original dimension after a few hours at room temperature.
Urethane dimension will change with the surrounding temperature, but the amount of change is not large, and it can be restored to its original dimension after a few hours at room temperature.
Example of Use
| Example of Use① | Role of Product |
■ Workpiece Receiving Box | Polyurethane is used as a stopper buffer to protect the workpiece. |
| Example of Use② | Role of Product |
■ Workpiece Fixture | Polyurethane with various hardness levels can be selected to increase or decrease clamping force. |
Application Industries
Related Products
| Formed Bearing Silicone/Polyurethane/Flat Type with External Thread | Urethane stopper bolt Shoulder type | Urethane washer | ||
 |  |  | ||
| Typical model: UMBH6-20 | Typical model: UST3-15 | Representative Model: URWL20-10-5 |
Related Documents
MISUMI Polyurethane, Rubber, and Sponge Characteristics Click Here
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-UTSHN1-[10-500/1]-[10-500/1] |
| E-UTSHN1H1-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN1H2-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN1H3-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN1H4-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN1H5-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN1H6-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN1H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN1H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z3 |
| E-UTSHN1H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN1H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[3,4] |
| E-UTSHN1H15-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN1H15-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[4,5,6,8] |
| E-UTSHN1H20-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN1H20-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[4,5,6,8] |
| E-UTSHN1H25-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN1H25-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[4,5,6,8,10] |
| E-UTSHN1H30-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN1H30-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[4,5,6,8,10] |
| E-UTSHN2-[10-500/1]-[10-500/1] |
| E-UTSHN2H1-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN2H2-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN2H3-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN2H4-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN2H5-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN2H6-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN2H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN2H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z3 |
| E-UTSHN2H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN2H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[3,4] |
| E-UTSHN2H15-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN2H15-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[4,5,6,8] |
| E-UTSHN2H20-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN2H20-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[4,5,6,8] |
| E-UTSHN2H25-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN2H25-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[4,5,6,8,10] |
| E-UTSHN2H30-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN2H30-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[4,5,6,8,10] |
| E-UTSHN3-[10-500/1]-[10-500/1] |
| E-UTSHN3H1-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN3H2-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN3H3-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN3H4-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN3H5-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN3H6-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN3H8-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN3H8-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-Z3 |
| E-UTSHN3H10-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN3H10-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-Z[3,4] |
| E-UTSHN3H15-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN3H15-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-Z[4,5,6,8] |
| E-UTSHN3H20-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN3H20-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-Z[4,5,6,8] |
| E-UTSHN3H25-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN3H25-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-Z[4,5,6,8,10] |
| E-UTSHN3H30-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN3H30-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-Z[4,5,6,8,10] |
| E-UTSHN4-[10-500/1]-[10-500/1] |
| E-UTSHN4H1-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[9-491/0.5]-N[3,4,5,6,8,10] |
| E-UTSHN4H2-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[9-491/0.5]-N[3,4,5,6,8,10] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Grade, Type | Width A (mm) | Thickness T (mm) | Length B (mm) | With or Without Adhesive | Hardness (Shore Hardness · Indicated Hardness · Indentation Hardness) | Hole machining | Counterbore Nominal Diameter [Z] | Through Hole Nominal Diameter [N] | F (mm) | G (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 10 ～ 500 | 1 | 10 ～ 500 | No Adhesive | Shore A90 | No hole machining | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 1 | 25 ～ 500 | No Adhesive | Shore A90 | 1H (1 hole) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 2 | 25 ～ 500 | No Adhesive | Shore A90 | 1H (1 hole) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 3 | 25 ～ 500 | No Adhesive | Shore A90 | 1H (1 hole) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 4 | 25 ～ 500 | No Adhesive | Shore A90 | 1H (1 hole) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 5 | 25 ～ 500 | No Adhesive | Shore A90 | 1H (1 hole) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 6 | 25 ～ 500 | No Adhesive | Shore A90 | 1H (1 hole) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 8 | 25 ～ 500 | No Adhesive | Shore A90 | 1H (1 hole) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 8 | 25 ～ 500 | No Adhesive | Shore A90 | 1H (1 hole) | 3 | - | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 10 | 25 ～ 500 | No Adhesive | Shore A90 | 1H (1 hole) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 10 | 25 ～ 500 | No Adhesive | Shore A90 | 1H (1 hole) | 3 ～ 4 | - | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 15 | 25 ～ 500 | No Adhesive | Shore A90 | 1H (1 hole) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 15 | 25 ～ 500 | No Adhesive | Shore A90 | 1H (1 hole) | 4 ～ 8 | - | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 20 | 25 ～ 500 | No Adhesive | Shore A90 | 1H (1 hole) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 20 | 25 ～ 500 | No Adhesive | Shore A90 | 1H (1 hole) | 4 ～ 8 | - | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 25 | 25 ～ 500 | No Adhesive | Shore A90 | 1H (1 hole) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 25 | 25 ～ 500 | No Adhesive | Shore A90 | 1H (1 hole) | 4 ～ 10 | - | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 30 | 25 ～ 500 | No Adhesive | Shore A90 | 1H (1 hole) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 30 | 25 ～ 500 | No Adhesive | Shore A90 | 1H (1 hole) | 4 ～ 10 | - | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 10 ～ 500 | 2 | 10 ～ 500 | No Adhesive | Shore A90 | No hole machining | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 1 | 25 ～ 500 | No Adhesive | Shore A90 | 2H (2 holes) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 2 | 25 ～ 500 | No Adhesive | Shore A90 | 2H (2 holes) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 3 | 25 ～ 500 | No Adhesive | Shore A90 | 2H (2 holes) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 4 | 25 ～ 500 | No Adhesive | Shore A90 | 2H (2 holes) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 5 | 25 ～ 500 | No Adhesive | Shore A90 | 2H (2 holes) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 6 | 25 ～ 500 | No Adhesive | Shore A90 | 2H (2 holes) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 8 | 25 ～ 500 | No Adhesive | Shore A90 | 2H (2 holes) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 8 | 25 ～ 500 | No Adhesive | Shore A90 | 2H (2 holes) | 3 | - | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 10 | 25 ～ 500 | No Adhesive | Shore A90 | 2H (2 holes) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 10 | 25 ～ 500 | No Adhesive | Shore A90 | 2H (2 holes) | 3 ～ 4 | - | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 15 | 25 ～ 500 | No Adhesive | Shore A90 | 2H (2 holes) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 15 | 25 ～ 500 | No Adhesive | Shore A90 | 2H (2 holes) | 4 ～ 8 | - | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 20 | 25 ～ 500 | No Adhesive | Shore A90 | 2H (2 holes) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 20 | 25 ～ 500 | No Adhesive | Shore A90 | 2H (2 holes) | 4 ～ 8 | - | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 25 | 25 ～ 500 | No Adhesive | Shore A90 | 2H (2 holes) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 25 | 25 ～ 500 | No Adhesive | Shore A90 | 2H (2 holes) | 4 ～ 10 | - | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 30 | 25 ～ 500 | No Adhesive | Shore A90 | 2H (2 holes) | - | 3 ～ 10 | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 30 | 25 ～ 500 | No Adhesive | Shore A90 | 2H (2 holes) | 4 ～ 10 | - | 9 ～ 491 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 10 ～ 500 | 3 | 10 ～ 500 | No Adhesive | Shore A90 | No hole machining | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 1 | 25 ～ 500 | No Adhesive | Shore A90 | 3H (3 Holes) | - | 3 ～ 10 | 9 ～ 245 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 2 | 25 ～ 500 | No Adhesive | Shore A90 | 3H (3 Holes) | - | 3 ～ 10 | 9 ～ 245 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 3 | 25 ～ 500 | No Adhesive | Shore A90 | 3H (3 Holes) | - | 3 ～ 10 | 9 ～ 245 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 4 | 25 ～ 500 | No Adhesive | Shore A90 | 3H (3 Holes) | - | 3 ～ 10 | 9 ～ 245 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 5 | 25 ～ 500 | No Adhesive | Shore A90 | 3H (3 Holes) | - | 3 ～ 10 | 9 ～ 245 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 6 | 25 ～ 500 | No Adhesive | Shore A90 | 3H (3 Holes) | - | 3 ～ 10 | 9 ～ 245 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 8 | 25 ～ 500 | No Adhesive | Shore A90 | 3H (3 Holes) | - | 3 ～ 10 | 9 ～ 245 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 8 | 25 ～ 500 | No Adhesive | Shore A90 | 3H (3 Holes) | 3 | - | 9 ～ 245 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 10 | 25 ～ 500 | No Adhesive | Shore A90 | 3H (3 Holes) | - | 3 ～ 10 | 9 ～ 245 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 10 | 25 ～ 500 | No Adhesive | Shore A90 | 3H (3 Holes) | 3 ～ 4 | - | 9 ～ 245 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 15 | 25 ～ 500 | No Adhesive | Shore A90 | 3H (3 Holes) | - | 3 ～ 10 | 9 ～ 245 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 15 | 25 ～ 500 | No Adhesive | Shore A90 | 3H (3 Holes) | 4 ～ 8 | - | 9 ～ 245 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 20 | 25 ～ 500 | No Adhesive | Shore A90 | 3H (3 Holes) | - | 3 ～ 10 | 9 ～ 245 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 20 | 25 ～ 500 | No Adhesive | Shore A90 | 3H (3 Holes) | 4 ～ 8 | - | 9 ～ 245 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 25 | 25 ～ 500 | No Adhesive | Shore A90 | 3H (3 Holes) | - | 3 ～ 10 | 9 ～ 245 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 25 | 25 ～ 500 | No Adhesive | Shore A90 | 3H (3 Holes) | 4 ～ 10 | - | 9 ～ 245 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 30 | 25 ～ 500 | No Adhesive | Shore A90 | 3H (3 Holes) | - | 3 ～ 10 | 9 ～ 245 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 30 | 25 ～ 500 | No Adhesive | Shore A90 | 3H (3 Holes) | 4 ～ 10 | - | 9 ～ 245 | 5 ～ 495 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 10 ～ 500 | 4 | 10 ～ 500 | No Adhesive | Shore A90 | No hole machining | - | - | - | - | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 1 | 25 ～ 500 | No Adhesive | Shore A90 | 4H (4 Holes) | - | 3 ～ 10 | 9 ～ 491 | 9 ～ 491 | ||
- | 1 Piece(s) | 6 Day(s) | [Standard Urethane] Ether-based urethane | 25 ～ 500 | 2 | 25 ～ 500 | No Adhesive | Shore A90 | 4H (4 Holes) | - | 3 ～ 10 | 9 ～ 491 | 9 ～ 491 |
Loading...
Basic Information
| Material | Urethane |
|---|
Specification/Dimensions
-
Grade, Type
- Standard Urethane
- Standard Urethane
-
Width A(mm)
-
Thickness T(mm)
-
Length B(mm)
-
With or Without Adhesive
- With Adhesive
- No Adhesive
-
Hardness (Shore Hardness · Indicated Hardness · Indentation Hardness)
- Shore A30
- Shore A50
- Shore A70
- Shore A90
- Shore A95
-
Hole machining
- 1H (1 hole)
- 2H (2 holes)
- 3H (3 Holes)
- 4H (4 Holes)
- 6H (6 holes)
- No hole machining
-
Counterbore Nominal Diameter [Z]
-
Through Hole Nominal Diameter [N]
-
F(mm)
-
G(mm)
-
type
- E-UTSHN
- E-UTSHN1H
- E-UTSHN2H
- E-UTSHN3H
- E-UTSHN4H
- E-UTSHN6H
- E-UTSHNA
- E-UTSHNA1H
- E-UTSHNA2H
- E-UTSHNA3H
- E-UTSHNA4H
- E-UTSHNA6H
- E-UTSL
- E-UTSL1H
- E-UTSL2H
- E-UTSL3H
- E-UTSL4H
- E-UTSL6H
- E-UTSLA
- E-UTSLA1H
- E-UTSLA2H
- E-UTSLA3H
- E-UTSLA4H
- E-UTSLA6H
- E-UTSLL
- E-UTSLL1H
- E-UTSLL2H
- E-UTSLL3H
- E-UTSLL4H
- E-UTSLL6H
- E-UTSLLA
- E-UTSLLA1H
- E-UTSLLA2H
- E-UTSLLA3H
- E-UTSLLA4H
- E-UTSLLA6H
- E-UTSM
- E-UTSM1H
- E-UTSM2H
- E-UTSM3H
- E-UTSM4H
- E-UTSM6H
- E-UTSMA
- E-UTSMA1H
- E-UTSMA2H
- E-UTSMA3H
- E-UTSMA4H
- E-UTSMA6H
- E-UTSSN
- E-UTSSN1H
- E-UTSSN2H
- E-UTSSN3H
- E-UTSSN4H
- E-UTSSN6H
- E-UTSSNA
- E-UTSSNA1H
- E-UTSSNA2H
- E-UTSSNA3H
- E-UTSSNA4H
- E-UTSSNA6H
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Highly Abrasion Resistant Sheets, Heat Resistant Urethane Sheets - Vulkollan® / Abrasion Resistant Urethane
- Heat Insulation Tapes - Temperature limit for seals is 80°C.
- Polyethylene Foam PE Light A-8
- NR Absorbent Pad, 20 mm Thick
- Filter
- Polyurethane (Adhesive-Backed)
- 5S Management Sheet
- Corrugated Urethane Absorbent Pad Sheet
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy