(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Loading

  • [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Polyurethane Plate, Electrical Conductive Type

Polyurethane Plate, Electrical Conductive Type

MISUMI

MiSUMi Economy

MISUMI

Part Number

Configured Part Number is shown.

 
Product Overview
 
Polyurethane pads prevent workpieces from being scratched or cracked during fastening; they also provide excellent cushioning and vibration damping for impact parts, and are effective in vibration prevention.
Depending on different operating conditions, a wide variety of products are available, including options such as ultra wear-resistant, high wear-resistant, and heat-resistant polyurethane pads.
 
Dimensional Drawing
 
MISUMI Polyurethane Square Pad URETHANE SHEETS ADHESIVE FOR URETHANE
 
Specifications Overview
 
A·B dimension configurable Material HardnessColor
Non-adhesive type
E-UTSHNEAntistatic
Urethane		Shore A90Grey
E-UTSMEShore A70
E-UTSLEShore A50
For products with adhesive type T4 or above, the adhesive tape may peel off due to its own weight. Please use for temporary fixing, or secure with bolts at the same time.
Polyurethane will turn yellow over time, but its properties will not change. Please be careful when using.
■ Precision Reference
T Tolerance
TTolerance
0.5±0.2
1 to 4±0.3
5 to 10±0.4
15 to 30±0.5

A·B Tolerance
A·BTolerance
200 or Less±0.5
201 to 300±1.0
301 to 400±1.2
401 to 500±1.5
 
Specification Table
 
■ A, B Dimension Specification Type - Standard Type -
Part NumberCan be specified down to 1 mm increments
TypeTAB
E-UTSHNE
E-UTSME
E-UTSLE		(Electrostatic Type Shore A90)
(Electrostatic Type Shore A70)
(Electrostatic Type Shore A50)		110~50010~500
2
3
4
5
6
8
10
15
20
25
30
A ≥ B ≥ T

■ A/B Size Specification Type - Hole Machining Type -
Part NumberSpecified unit: 1 mm (A ≥ B ≥ T)Can be specified down to 0.5mm incrementsBolt nominal diameter selection
TypeNominal modelTABFGN (Through Hole)Z (Counterbore)
E-UTSHNE
E-UTSME
E-UTSLE		(Electrostatic Type Shore A90)
(Electrostatic Type Shore A70)
(Electrostatic Type Shore A50)		1H

2H

3H

4H

6H		125~50025~5009~491

(1H·2H·4H Type)

9~245

(3H·6H Type)		5~495

(1H·2H·3H Type)

9~491

(4H·6H Type)		3
4
5
6
8
10		-
2-
3-
4-
5-
6-
83     
1034    
15 4568 
20 4568 
25 456810
30 456810
When selecting the 1H type, the F dimension must satisfy: d (d1)/2 + 2.5 ≤ F ≤ A - d (d1)/2 - 2.5. When selecting the 2H or 4H type, it must satisfy: d (d1) + 5 ≤ F ≤ A - d (d1) - 5. When selecting the 3H or 6H type, it must satisfy: d (d1) + 5 ≤ F ≤ A/2 - d (d1)/2 - 2.5.
When selecting types 1H, 2H, or 3H, the specified range for G dimension must satisfy: d (d1)/2+2.5 ≤ G ≤ B-d (d1)/2-2.5. When selecting types 4H or 6H, it must satisfy d (d1)+5 ≤ G ≤ B-d (d1)-5. (When d is selected as through hole, and d1 is selected as counterbore)
 
Product Features
 
Feature 1: Polyurethane offers a wider range of hardness options compared to rubber, is softer and more elastic, and also has a certain degree of airtightness.
Feature 2: Urethane has excellent mechanical strength and is more widely used to prevent scars and cracks when brittle objects such as glass and acrylic are fastened.
Feature 3: Not easily transmits vibration or sound, and when used with fastening screws, it can provide a certain degree of cushioning effect during fastening.
Feature 4: Polyurethane has low dust generation, and since it does not contain carbon, it is a material that is not prone to color transfer. (*Natural color only)
Feature 5: A wide variety of products are available to suit different operating conditions.

■ Hardness Table
ShawA95A90A70A50A30
Urethane●●●●●
Nitrile Rubber××●●×
Chloroprene××●××
EPDM Rubber××●××
Silicone Rubber××●●×
Fluororubber××●××
Butyl Rubber××●××
 
Precautions
 
(1) For T4 or higher products with adhesive, the adhesive tape may peel off due to its own weight. Please use for temporary fixing, or use together with bolt fixing.
(2) MISUMI's Shore A: Used for the hardness of polyurethane and rubber materials. Values measured with the Type A Durometer rebound hardness tester according to the new JIS standard K6253 are indicated as "Shore A70". The higher the value, the greater the hardness.
(3) Polyurethane will yellow over time, but its properties will not change.
 
Example of Use
 
Example of UseRole of Product
Detailed example of MISUMI positioning and fastening mechanismUse polyurethane pads at the front end of the clamp to prevent fasteners from being scratched or cracked
While adjusting the height, it also reduces vibration during workpiece operation.
 
Application Industries
 
Electronic Automotive
Widely used in the manufacture of electronic appliances and other electronic products, with high acceptance SHAFTS FOR URETHANE MOLD BEARING Widely used in automotive industry, industrial fields such as automobiles, automotive manufacturing ENGINEERING PLUSES
Smart phone Semiconductor
Widely used in smart phone and other fields popular among the public GUIDE ROLLERS Widely used in semiconductor industry, semiconductor field and semiconductor equipment, well received CONVEYOR ROLLERS PRESS WHEELS WITH BEARINGS TYPE
 
Related Products
 
Resin Collar Standard Stopper bolt with urethane Straight type Urethane molded bearing Inner wheel protruded For heavy load
Specific specifications and parameters of resin collar Stopper bolt with urethane Straight type Specifications and parameters Urethane molded bearing Inner wheel protruded For heavy load Concrete specifications and parameters
Representative Model: CLJJ10-16-20.0 Representative Model: UST8-40 Representative Model: UMRHW40
Advantages: Optional inner and outer diameter and height, better price Suitable for conveying heavy load workpieces, compact tip, usable in narrow spaces Suitable for conveying heavy load workpieces
 
Related Documents
 
MISUMI Polyurethane, Rubber, and Sponge Characteristics Click Here.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
Part Number
E-UTSHNE1-[10-500/1]-[10-500/1]
E-UTSHNE1H1-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE1H2-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE1H3-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE1H4-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE1H5-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE1H6-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE1H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE1H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z3
E-UTSHNE1H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE1H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[3,​4]
E-UTSHNE1H15-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE1H15-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[4,​5,​6,​8]
E-UTSHNE1H20-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE1H20-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[4,​5,​6,​8]
E-UTSHNE1H25-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE1H25-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[4,​5,​6,​8,​10]
E-UTSHNE1H30-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE1H30-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[4,​5,​6,​8,​10]
E-UTSHNE2-[10-500/1]-[10-500/1]
E-UTSHNE2H1-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE2H2-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE2H3-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE2H4-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE2H5-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE2H6-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE2H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE2H8-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z3
E-UTSHNE2H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE2H10-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[3,​4]
E-UTSHNE2H15-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE2H15-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[4,​5,​6,​8]
E-UTSHNE2H20-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE2H20-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[4,​5,​6,​8]
E-UTSHNE2H25-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE2H25-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[4,​5,​6,​8,​10]
E-UTSHNE2H30-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE2H30-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[5-495/0.5]-Z[4,​5,​6,​8,​10]
E-UTSHNE3-[10-500/1]-[10-500/1]
E-UTSHNE3H1-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE3H2-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE3H3-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE3H4-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE3H5-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE3H6-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE3H8-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE3H8-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-Z3
E-UTSHNE3H10-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE3H10-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-Z[3,​4]
E-UTSHNE3H15-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE3H15-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-Z[4,​5,​6,​8]
E-UTSHNE3H20-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE3H20-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-Z[4,​5,​6,​8]
E-UTSHNE3H25-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE3H25-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-Z[4,​5,​6,​8,​10]
E-UTSHNE3H30-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE3H30-[25-500/1]-[25-500/1]-F[9-245/0.5]-G[5-495/0.5]-Z[4,​5,​6,​8,​10]
E-UTSHNE4-[10-500/1]-[10-500/1]
E-UTSHNE4H1-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
E-UTSHNE4H2-[25-500/1]-[25-500/1]-F[9-491/0.5]-G[9-491/0.5]-N[3,​4,​5,​6,​8,​10]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipWidth A
(mm) 		Thickness T
(mm) 		Length B
(mm) 		Hardness (Shore Hardness · Indicated Hardness · Indentation Hardness) Hole machining Counterbore Nominal Diameter [Z] G
(mm) 		F
(mm) 		Through Hole Nominal Diameter [N]

-

1 Piece(s) 6 Day(s) 10 ～ 500110 ～ 500Shore A90No hole machining----

-

1 Piece(s) 6 Day(s) 25 ～ 500125 ～ 500Shore A901H (1 hole)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 500225 ～ 500Shore A901H (1 hole)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 500325 ～ 500Shore A901H (1 hole)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 500425 ～ 500Shore A901H (1 hole)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 500525 ～ 500Shore A901H (1 hole)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 500625 ～ 500Shore A901H (1 hole)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 500825 ～ 500Shore A901H (1 hole)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 500825 ～ 500Shore A901H (1 hole)15 ～ 4959 ～ 491-

-

1 Piece(s) 6 Day(s) 25 ～ 5001025 ～ 500Shore A901H (1 hole)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 5001025 ～ 500Shore A901H (1 hole)1 ～ 45 ～ 4959 ～ 491-

-

1 Piece(s) 6 Day(s) 25 ～ 5001525 ～ 500Shore A901H (1 hole)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 5001525 ～ 500Shore A901H (1 hole)1 ～ 85 ～ 4959 ～ 491-

-

1 Piece(s) 6 Day(s) 25 ～ 5002025 ～ 500Shore A901H (1 hole)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 5002025 ～ 500Shore A901H (1 hole)1 ～ 85 ～ 4959 ～ 491-

-

1 Piece(s) 6 Day(s) 25 ～ 5002525 ～ 500Shore A901H (1 hole)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 5002525 ～ 500Shore A901H (1 hole)1 ～ 105 ～ 4959 ～ 491-

-

1 Piece(s) 6 Day(s) 25 ～ 5003025 ～ 500Shore A901H (1 hole)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 5003025 ～ 500Shore A901H (1 hole)1 ～ 105 ～ 4959 ～ 491-

-

1 Piece(s) 6 Day(s) 10 ～ 500210 ～ 500Shore A90No hole machining----

-

1 Piece(s) 6 Day(s) 25 ～ 500125 ～ 500Shore A902H (2 holes)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 500225 ～ 500Shore A902H (2 holes)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 500325 ～ 500Shore A902H (2 holes)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 500425 ～ 500Shore A902H (2 holes)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 500525 ～ 500Shore A902H (2 holes)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 500625 ～ 500Shore A902H (2 holes)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 500825 ～ 500Shore A902H (2 holes)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 500825 ～ 500Shore A902H (2 holes)15 ～ 4959 ～ 491-

-

1 Piece(s) 6 Day(s) 25 ～ 5001025 ～ 500Shore A902H (2 holes)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 5001025 ～ 500Shore A902H (2 holes)1 ～ 45 ～ 4959 ～ 491-

-

1 Piece(s) 6 Day(s) 25 ～ 5001525 ～ 500Shore A902H (2 holes)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 5001525 ～ 500Shore A902H (2 holes)1 ～ 85 ～ 4959 ～ 491-

-

1 Piece(s) 6 Day(s) 25 ～ 5002025 ～ 500Shore A902H (2 holes)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 5002025 ～ 500Shore A902H (2 holes)1 ～ 85 ～ 4959 ～ 491-

-

1 Piece(s) 6 Day(s) 25 ～ 5002525 ～ 500Shore A902H (2 holes)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 5002525 ～ 500Shore A902H (2 holes)1 ～ 105 ～ 4959 ～ 491-

-

1 Piece(s) 6 Day(s) 25 ～ 5003025 ～ 500Shore A902H (2 holes)-5 ～ 4959 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 5003025 ～ 500Shore A902H (2 holes)1 ～ 105 ～ 4959 ～ 491-

-

1 Piece(s) 6 Day(s) 10 ～ 500310 ～ 500Shore A90No hole machining----

-

1 Piece(s) 6 Day(s) 25 ～ 500125 ～ 500Shore A903H (3 Holes)-5 ～ 4959 ～ 2452 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 500225 ～ 500Shore A903H (3 Holes)-5 ～ 4959 ～ 2452 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 500325 ～ 500Shore A903H (3 Holes)-5 ～ 4959 ～ 2452 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 500425 ～ 500Shore A903H (3 Holes)-5 ～ 4959 ～ 2452 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 500525 ～ 500Shore A903H (3 Holes)-5 ～ 4959 ～ 2452 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 500625 ～ 500Shore A903H (3 Holes)-5 ～ 4959 ～ 2452 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 500825 ～ 500Shore A903H (3 Holes)-5 ～ 4959 ～ 2452 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 500825 ～ 500Shore A903H (3 Holes)15 ～ 4959 ～ 245-

-

1 Piece(s) 6 Day(s) 25 ～ 5001025 ～ 500Shore A903H (3 Holes)-5 ～ 4959 ～ 2452 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 5001025 ～ 500Shore A903H (3 Holes)1 ～ 45 ～ 4959 ～ 245-

-

1 Piece(s) 6 Day(s) 25 ～ 5001525 ～ 500Shore A903H (3 Holes)-5 ～ 4959 ～ 2452 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 5001525 ～ 500Shore A903H (3 Holes)1 ～ 85 ～ 4959 ～ 245-

-

1 Piece(s) 6 Day(s) 25 ～ 5002025 ～ 500Shore A903H (3 Holes)-5 ～ 4959 ～ 2452 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 5002025 ～ 500Shore A903H (3 Holes)1 ～ 85 ～ 4959 ～ 245-

-

1 Piece(s) 6 Day(s) 25 ～ 5002525 ～ 500Shore A903H (3 Holes)-5 ～ 4959 ～ 2452 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 5002525 ～ 500Shore A903H (3 Holes)1 ～ 105 ～ 4959 ～ 245-

-

1 Piece(s) 6 Day(s) 25 ～ 5003025 ～ 500Shore A903H (3 Holes)-5 ～ 4959 ～ 2452 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 5003025 ～ 500Shore A903H (3 Holes)1 ～ 105 ～ 4959 ～ 245-

-

1 Piece(s) 6 Day(s) 10 ～ 500410 ～ 500Shore A90No hole machining----

-

1 Piece(s) 6 Day(s) 25 ～ 500125 ～ 500Shore A904H (4 Holes)-9 ～ 4919 ～ 4912 ～ 10

-

1 Piece(s) 6 Day(s) 25 ～ 500225 ～ 500Shore A904H (4 Holes)-9 ～ 4919 ～ 4912 ～ 10

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>

Basic Information

Material Urethane With or Without Adhesive No Adhesive

Configure

Clear All

306 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Width A(mm)

     [10-500/1mm Unit(s)]

    Clear

  • Thickness T(mm)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 15
    • 20
    • 25
    • 30

    Clear

  • Length B(mm)

     [10-500/1mm Unit(s)]

    Clear

  • Hardness (Shore Hardness · Indicated Hardness · Indentation Hardness)

    • Shore A50
    • Shore A70
    • Shore A90

    Clear

  • Hole machining

    • 1H (1 hole)
    • 2H (2 holes)
    • 3H (3 Holes)
    • 4H (4 Holes)
    • 6H (6 holes)
    • No hole machining

    Clear

  • Counterbore Nominal Diameter [Z]

    • 1
    • 4
    • 5
    • 6
    • 8
    • 10

    Clear

  • G(mm)

     [5-495/0.5mm Unit(s)]

    Clear

  • F(mm)

     [9-491/0.5mm Unit(s)]

    Clear

  • Through Hole Nominal Diameter [N]

    • 2
    • 4
    • 5
    • 6
    • 8
    • 10

    Clear

  • type

    • E-UTSHNE
    • E-UTSHNE1H
    • E-UTSHNE2H
    • E-UTSHNE3H
    • E-UTSHNE4H
    • E-UTSHNE6H
    • E-UTSLE
    • E-UTSLE1H
    • E-UTSLE2H
    • E-UTSLE3H
    • E-UTSLE4H
    • E-UTSLE6H
    • E-UTSME
    • E-UTSME1H
    • E-UTSME2H
    • E-UTSME3H
    • E-UTSME4H
    • E-UTSME6H

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 6 Day(s) or Less

    Clear

Specify Alterations

Additional Products in this Category

Tech Support

Technical Inquiry

Payment Method

more
  • Credit Card
    • VISA
    • MasterCard
  • Bank Transfer
    • FPX
    • Interbank GIRO (IBG)

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm,    9am – 1pm(Sat) * Order cut-off time is 12pm

  • Tel: (60) 3 7890 6399
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.