(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Polyurethane Rubber Pushers, Threaded Type (E-USSM16)
- Volume Discount
Part Number
Configured Part Number is shown.
E-USSM16
Product Overview
Mainly used for flexible workpiece fixation scenarios. The polyurethane section at the front end provides a flexible clamping force. At the same time, it is also widely used as a stopper.
Dimensional Drawing
.jpg)
Material Specification
| Type | Pressing block | Metal core | ||
| Flat head type | Round |  Hardness |  Material | Material |
| E-USLH | E-USSH | Shore A90 | Ester-based Polyurethane | Stainless Steel |
| E-USLM | E-USSM | Shore A70 | Ester-based Polyurethane | |
| E-USLL | E-USSL | Shore A50 | ||
Specification Overview
| Type | Pressing block | Metal core | Outer Diameter D | ||
| Flat head type | Round | Hardness | Material | Material | |
| E-USLH | E-USSH | Shore A90 | Ester-based Polyurethane | Stainless Steel | 6 to 36 |
| E-USLM | E-USSM | Shore A70 | Ester-based Polyurethane | ||
| E-USLL | E-USSL | Shore A50 | |||
Polyurethane is thermally bonded to the metal core.Polyurethane may discolor over time but there is no effect on properties.Features of ether-based polyurethane: It excels in repeat use and shock-absorbing properties, andcan be used for applications such as mechanical stoppers.Ester-based polyurethane: Its features are similar to those of ether-based polyurethane, but with better abrasionresistance. However, do not use it in high humidity or in water. This will cause hydrolysis of Polyurethane.Specification Table
| Part Number | L | M x pitch | (SR1) | (R2) | m | ℓ1 | ℓ2 | f | W | ||
 Type |  D | (Coarse Thread) | |||||||||
| 6 | 10 | M3×0.5 | 6 | 1 | 4.5 | 5 | 4 | 1 | 5 | ||
| Flat head type | Round | 8 | 12 | M4×0.7 | 8 | 6 | 7 | ||||
| E-USLH | E-USSH | 10 | 15 | M5×0.8 | 10 | 7 | 8 | ||||
| E-USLM | E-USSM | 12 | 16 | M6×1.0 | 12 | 2 | 10 | 1.5 | 10 | ||
| E-USLL | E-USSL | 16 | 20 | M8×1.25 | 16 | 12 | 6 | 5 | 2 | 14 | |
| 20 | 25 | M10×1.5 | 20 | 3 | 14 | 8 | 6 | 17 | |||
| 25 | 30 | M16 × 2.0 | 25 | 18 | 10 | 8 | 3 | 22 | |||
Polyurethane rubber may discolor over time, but this does not affect the material's properties. Polyurethane rubber is thermally bonded to the metal core.■Product Weight
| Type | D | Weight (g) Reference Value |
| E-USLH E-USLL E-USLM | 6 | 2 |
| 8 | 3 | |
| 10 | 6 | |
| 12 | 10 | |
| 16 | 20 | |
| 20 | 40 | |
| 25 | 94 | |
| E-USSH E-USSL E-USSM | 6 | 2 |
| 8 | 3 | |
| 10 | 6 | |
| 12 | 10 | |
| 16 | 20 | |
| 20 | 39 | |
| 25 | 93 |
Product Features
Feature 1: Polyurethane maintains excellent mechanical strength while providing elasticity. When clamping workpieces with relatively soft surfaces, it is less likely to leave indentations or even damage the surface of the workpiece.
Feature 2: Polyurethane is sintered onto the surface of the metal core, which provides higher polyurethane adhesion compared to press-fit or bonded products, making it more suitable for use scenarios with more complex force directions.
Feature 3: Urethane sintered products are less likely to transmit vibration and sound.
Feature 4: Polyurethane has low dust generation, and since it does not contain carbon, it is a material that is not prone to color transfer. (*Natural color only)
Feature 5: Multiple hardness options available for different usage scenarios.
Permissible hardness range: ±5
This series only includes Shore A hardness 30, 50, 70, 90
Feature 2: Polyurethane is sintered onto the surface of the metal core, which provides higher polyurethane adhesion compared to press-fit or bonded products, making it more suitable for use scenarios with more complex force directions.
Feature 3: Urethane sintered products are less likely to transmit vibration and sound.
Feature 4: Polyurethane has low dust generation, and since it does not contain carbon, it is a material that is not prone to color transfer. (*Natural color only)
Feature 5: Multiple hardness options available for different usage scenarios.
| Hardness | Equivalent to |
| Shore A95 | Golf Ball |
| Shore A90 | Baseball |
| Shore A70 | Softball |
| Shore A50 | Eraser |
| Shore A30 | Bicycle Inner Tube |
| Shore A15 | Konjac Jelly |
Permissible hardness range: ±5This series only includes Shore A hardness 30, 50, 70, 90■ Reference: Bending Test for Products of Various Hardness
■ Test Conditions
Apply a 5N load (tension) using a force gauge
| Material | Standard urethane |
| Thickness | 5 mm |
| Width | 30 mm |
| Length | 40 mm |
Apply a 5N load (tension) using a force gaugePrecautions
(1) When using ester-based polyurethane, please do not use it in high humidity or in water. This results in hydrolysis of urethane.
(2) About urethane discoloring
Urethane will darken its color by absorbing UV rays or illuminating light. This phenomenon is called yellowing. But it does not affect its physical properties, please fully understand when using it.
(3) Hydrolysis characteristics of urethane
If urethane is used for a long time in a moist or humid environment, it will be hydrolyzed and deteriorated.
It is recommended to manage the temperature and humidity of the warehouse and operating environment in areas with high humidity to extend the service life of the product.
(2) About urethane discoloring
Urethane will darken its color by absorbing UV rays or illuminating light. This phenomenon is called yellowing. But it does not affect its physical properties, please fully understand when using it.
| New urethane | Yellowed urethane |
 |  |
(3) Hydrolysis characteristics of urethane
If urethane is used for a long time in a moist or humid environment, it will be hydrolyzed and deteriorated.
It is recommended to manage the temperature and humidity of the warehouse and operating environment in areas with high humidity to extend the service life of the product.
(4) Changes in Product Condition After Hydrolysis
· Polyurethane surface becomes sticky
· Irreversible marks are left when pressed lightly with a fingernail
· Polyurethane hardness decreases
· Polyurethane dries and cracks, easily disintegrating into powder
· Polyurethane surface becomes sticky
· Irreversible marks are left when pressed lightly with a fingernail
· Polyurethane hardness decreases
· Polyurethane dries and cracks, easily disintegrating into powder
| Hydrolyzed urethane |
 |
(5) Urethane dimension change
Urethane dimension will change with the surrounding temperature, but the amount of change is not large, and it can be restored to its original dimension after a few hours at room temperature.
Urethane dimension will change with the surrounding temperature, but the amount of change is not large, and it can be restored to its original dimension after a few hours at room temperature.
Example of Use
| Example of Use | Role of Product | |||||||||||||||||||||||||||
 | Polyurethane pressing block connected to the cylinder, used as a limit stopper. | |||||||||||||||||||||||||||
Related Industries
Related Products
| Resin Collar Standard | Stopper bolt with urethane Straight type | Urethane molded bearing Inner wheel protruded For heavy load | ||
 |  |  | ||
| Representative Model: E-CLJJ10-16-20.0 | Representative Model: E-UST8-40 | Representative Model: E-UMRHW40 | ||
| Advantages: Optional inner and outer diameter and height, better price | Suitable for conveying heavy load workpieces, compact tip, usable in narrow spaces | Suitable for conveying heavy load workpieces |
Related Documents
About MISUMI Polyurethane, Rubber, and Sponge Properties Click 
Polyurethane · Rubber · Sponge Properties Table
About MISUMI Polyurethane and Rubber Material Selection ClickPolyurethane · Rubber Material Selection Table
Polyurethane · Rubber · Sponge Properties TableAbout MISUMI Polyurethane and Rubber Material Selection Click
Polyurethane · Rubber Material Selection TablePart Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Basic Information
| Shape | Threaded |
|---|
Please check the type/dimensions/specifications of the part E-USSM16 in the Polyurethane Rubber Pushers, Threaded Type series.
Specification/Dimensions
-
type
- E-USLH
- E-USLL
- E-USLM
- E-USSH
- E-USSL
- E-USSM
-
O.D. D(Ø)
-
Material
- Polyurethane
- Polyurethane
-
Hardness
- Shore A50
- Shore A70
- Shore A90
-
Tip Shape
- Flat head type
- Round
-
M x pitch
- M3×0.5
- M4×0.7
- M5×0.8
- M6×1.0
- M8×1.25
- M10×1.5
- M16 × 2.0
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 13 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| E-USLH20 |
| E-USLH25 |
| E-USLH6 |
| E-USSM20 |
| E-USSM25 |
| E-USSM6 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | O.D. D (Ø) | Material | Hardness | Tip Shape | M x pitch |
|---|---|---|---|---|---|---|---|---|---|
MYR 46.59 | 1 Piece(s) | Available | 5 Day(s) | 20 | [Polyurethane] Polyether Polyurethane | Shore A90 | Flat head type | M10×1.5 | |
MYR 54.29 | 1 Piece(s) | Available | 6 Day(s) | 25 | [Polyurethane] Polyether Polyurethane | Shore A90 | Flat head type | M16 × 2.0 | |
MYR 33.78 | 1 Piece(s) | Available | 6 Day(s) | 6 | [Polyurethane] Polyether Polyurethane | Shore A90 | Flat head type | M3×0.5 | |
MYR 46.39 | 1 Piece(s) | Available | 6 Day(s) | 20 | [Polyurethane] Ester-based polyurethane | Shore A70 | Round | M10×1.5 | |
MYR 53.95 | 1 Piece(s) | Available | 7 Day(s) | 25 | [Polyurethane] Ester-based polyurethane | Shore A70 | Round | M16 × 2.0 | |
MYR 33.75 | 1 Piece(s) | Available | 6 Day(s) | 6 | [Polyurethane] Ester-based polyurethane | Shore A70 | Round | M3×0.5 |
Additional Products in this Category
- Resin Pushers - Shape Selectable and L Configurable
- Large Diameter Pushers - Threaded Type
- Small Diameter Pushers - Tapped Type
- Urethane Rubber Pushers - Tapped Type
- Silicon Rubber Pushers / Fluororubber Pushers - Threaded Type
- Resin Pushers - Standard - Tapped Type
- Polyurethane Rubber Pushers, Tapped Type
- Polyurethane Rubber Pushers Small Dia, Threaded Type
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy