(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Cantilever Shafts Standard, Retaining Ring Groove
MiSUMi Economy
- RoHS
Part Number
Configured Part Number is shown.
Product Overview
The cantilever pin can be used as the pivot point of rotary parts such as idlers. The pivot point is similar to the axis of a hinge, and the connected parts can make rotary movements.
Dimensional Drawing
Specifications Overview
| Type | D[Φ:mm] |  Equivalent Material |  Surface Treatment | |
| Thread Length Fixed | Thread Length Configurable | |||
| E-FXAA | E-FXNAA | 4~15 | General structural steel or carbon steel | Ferroferric Oxide Protective Film |
| E-PFXAA | E-PFXNAA | Electroless Nickel Plating | ||
| E-SFXAA | E-SFXNAA | Austenitic stainless steel | － | |
| E-HFXAA | － | Tempered steel hardness HRC30～ | Ferroferric Oxide Protective Film | |
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel and with surface treatment of electroless nickel plating.HFXAA is only applicable to D6, 8 and 10.Specification Table
| Part Number |  Dg7 | 1mm increments | H | W | M | d | m | n | |||||
 Type | No. |  Y |  F |  N | (Coarse Thread) | Reference Dimension | Tolerance | ||||||
| Thread Length Selectable E-FXAA E-PFXAA E-SFXAA E-HFXAA (D≥6) Thread Length Configurable E-FXNAA E-PFXNAA E-SFXNAA | 3 | 3 | -0.003 -0.012 | 2~30 | 3~50 | 3～ 6 | 7 | 5 | M 3 | 2 | ＋ 0.060 0 | 0.5 | 2 |
| 3A | 11 | 9 | |||||||||||
| 4 | 4 | -0.004 -0.016 | 4～ 8 | 8 | 6 | M 4 | 3 | 0.7 | |||||
| 4A | 12 | 10 | |||||||||||
| 5 | 5 | 5~10 | 9 | 7 | M 5 | 4 | ＋ 0.075 0 | ||||||
| 5A | 13 | 11 | |||||||||||
| 6 | 6 | 2~60 | 5~100 | 6~12 | 10 | 8 | M 6 | 5 | |||||
| 6A | 14 | 12 | |||||||||||
| 8 | 8 | -0.005 -0.020 | 8~16 | 12 | 10 | M 8 | 7 | ＋ 0.090 0 | 0.9 | 3 | |||
| 8A | 16 | 14 | |||||||||||
| 10 | 10 | 10~20 | 15 | 13 | M10 | 9.6 | 0 -0.09 | 1.15 | |||||
| 10A | 20 | 17 | |||||||||||
| 12 | 12 | -0.006 -0.024 | 10~150 | 12~24 | 17 | 14 | M12 | 11.5 | 0 -0.11 | 4 | |||
| 15 | 15 | 20 | 17 | 14.3 | |||||||||
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel and with surface treatment of electroless nickel plating.The dimension of wrench flats is 15 when Y≥17.N is available for Thread Length Configurable Type only.HFXAA is only applicable to D6, 8 and 10.Product Features
Feature 1: It has a tolerance of g7 and is used in conjunction with idlers, pulleys, sprockets, etc.
Feature 2: Available in various shapes. The product types include Threaded with Retaining Ring Groove type, Threaded Tapped End type, Inlay Threaded Threaded End type, Bolt Mounted Tapped End type, Flanged type, etc.
Feature 3: Products made of stainless steel (austenitic stainless steel) with excellent anti-rust performance and products with the surface treatment of electroless nickel plating are available for selection to solve the problem of rusting.
Feature 4: L Dimension Configurable type, freely selectable in 1mm increments to accommodate different use environments.
Feature 5: Thread length fixed type with relative low price is available.
Feature 2: Available in various shapes. The product types include Threaded with Retaining Ring Groove type, Threaded Tapped End type, Inlay Threaded Threaded End type, Bolt Mounted Tapped End type, Flanged type, etc.
Feature 3: Products made of stainless steel (austenitic stainless steel) with excellent anti-rust performance and products with the surface treatment of electroless nickel plating are available for selection to solve the problem of rusting.
Feature 4: L Dimension Configurable type, freely selectable in 1mm increments to accommodate different use environments.
Feature 5: Thread length fixed type with relative low price is available.
Precautions
①Anti-rust specification selection and maintenance
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel and with surface treatment of electroless nickel plating.
Products without surface treatment need to be applied antirust oil regularly for maintenance.
②For dimensions of male thread relief groove, refer to the Specification Table.
③This product has no accessory retaining ring. If you need a retaining ring, please select the alteration SET.
④The shapes, specifications and materials of matching retaining rings are as follows.
■Retaining ring shapes:
No.3~No.8(D=3~8): E-shaped retaining ring
No.10~No.15(D=10~15):C-shaped retaining ring
■Retaining ring specification: JIS nominal specifications For details, refer to
Retaining Ring Specifications
■Retaining ring materials:
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel and with surface treatment of electroless nickel plating.
Products without surface treatment need to be applied antirust oil regularly for maintenance.
②For dimensions of male thread relief groove, refer to the Specification Table.
③This product has no accessory retaining ring. If you need a retaining ring, please select the alteration SET.
④The shapes, specifications and materials of matching retaining rings are as follows.
■Retaining ring shapes:
No.3~No.8(D=3~8): E-shaped retaining ring
No.10~No.15(D=10~15):C-shaped retaining ring
■Retaining ring specification: JIS nominal specifications For details, refer to
Retaining Ring Specifications■Retaining ring materials:
| Cantilever Pin | Retaining Ring | ||
| Corresponding Material | Surface Treatment | Material | |
| General structural steel or carbon steel | Ferroferric Oxide Protective Film | Spring Steel | |
| Electroless Nickel Plating | SUS394—CSP | ||
| Austenitic stainless steel | - | ||
| SCM435 | Ferroferric Oxide Protective Film | Spring Steel | |
| Electroless Nickel Plating | SUS394—CSP | ||
Example of Use
Application Industries
| Electronic & Electrical | Automotive | Lithium battery | ||
 |  |  | ||
| Robotics | Smart Phones | Semiconductor | ||
 |  |  |
Related Products
| Idlers Belt Backside Tensioning Type | Timing Pulleys T10 | Economy series Toothed Timing Belts | ||
 |  |  | ||
| Representative model: AFBD9-20 | Representative model: TTPA22T10150-A-P24 | Representative model: C-HTBN400S2M-40 | ||
| Advantages: stable quality, short delivery time, multiple specifications. | Advantages: industry standard, short delivery time, multiple types. | Advantages: rich variety of specifications, high cost performance. |
Related Documents
For anti-rust performance and maintenance of metal materials and surface treatment, refer to Anti-Rust Performance
For applicable tightening torque for the bolts, refer toBolt Torque
For strength of bolt, refer toBolt Strength
Anti-Rust PerformanceFor applicable tightening torque for the bolts, refer to
Bolt TorqueFor strength of bolt, refer to
Bolt StrengthPart Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-FXAA3-[2-30/1]-F[3-50/1] |
| E-FXAA3A-[2-30/1]-F[3-50/1] |
| E-FXAA4-[2-30/1]-F[3-50/1] |
| E-FXAA4A-[2-30/1]-F[3-50/1] |
| E-FXAA5-[2-30/1]-F[3-50/1] |
| E-FXAA5A-[2-30/1]-F[3-50/1] |
| E-FXAA6-[2-60/1]-F[5-100/1] |
| E-FXAA6A-[2-60/1]-F[5-100/1] |
| E-FXAA8-[2-60/1]-F[5-100/1] |
| E-FXAA8A-[2-60/1]-F[5-100/1] |
| E-FXAA10-[2-60/1]-F[5-100/1] |
| E-FXAA10A-[2-60/1]-F[5-100/1] |
| E-FXAA12-[2-60/1]-F[10-150/1] |
| E-FXAA15-[2-60/1]-F[10-150/1] |
| E-FXNAA3-[2-30/1]-F[3-50/1]-N[3-6/1] |
| E-FXNAA3A-[2-30/1]-F[3-50/1]-N[3-6/1] |
| E-FXNAA4-[2-30/1]-F[3-50/1]-N[4-8/1] |
| E-FXNAA4A-[2-30/1]-F[3-50/1]-N[4-8/1] |
| E-FXNAA5-[2-30/1]-F[3-50/1]-N[5-10/1] |
| E-FXNAA5A-[2-30/1]-F[3-50/1]-N[5-10/1] |
| E-FXNAA6-[2-60/1]-F[5-100/1]-N[6-12/1] |
| E-FXNAA6A-[2-60/1]-F[5-100/1]-N[6-12/1] |
| E-FXNAA8-[2-60/1]-F[5-100/1]-N[8-16/1] |
| E-FXNAA8A-[2-60/1]-F[5-100/1]-N[8-16/1] |
| E-FXNAA10-[2-60/1]-F[5-100/1]-N[10-20/1] |
| E-FXNAA10A-[2-60/1]-F[5-100/1]-N[10-20/1] |
| E-FXNAA12-[2-60/1]-F[10-150/1]-N[12-24/1] |
| E-FXNAA15-[2-60/1]-F[10-150/1]-N[12-24/1] |
| E-HFXAA6-[2-60/1]-F[5-100/1] |
| E-HFXAA6A-[2-60/1]-F[5-100/1] |
| E-HFXAA8-[2-60/1]-F[5-100/1] |
| E-HFXAA8A-[2-60/1]-F[5-100/1] |
| E-HFXAA10-[2-60/1]-F[5-100/1] |
| E-HFXAA10A-[2-60/1]-F[5-100/1] |
| E-PFXAA3-[2-30/1]-F[3-50/1] |
| E-PFXAA3A-[2-30/1]-F[3-50/1] |
| E-PFXAA4-[2-30/1]-F[3-50/1] |
| E-PFXAA4A-[2-30/1]-F[3-50/1] |
| E-PFXAA5-[2-30/1]-F[3-50/1] |
| E-PFXAA5A-[2-30/1]-F[3-50/1] |
| E-PFXAA6-[2-60/1]-F[5-100/1] |
| E-PFXAA6A-[2-60/1]-F[5-100/1] |
| E-PFXAA8-[2-60/1]-F[5-100/1] |
| E-PFXAA8A-[2-60/1]-F[5-100/1] |
| E-PFXAA10-[2-60/1]-F[5-100/1] |
| E-PFXAA10A-[2-60/1]-F[5-100/1] |
| E-PFXAA12-[2-60/1]-F[10-150/1] |
| E-PFXAA15-[2-60/1]-F[10-150/1] |
| E-PFXNAA3-[2-30/1]-F[3-50/1]-N[3-6/1] |
| E-PFXNAA3A-[2-30/1]-F[3-50/1]-N[3-6/1] |
| E-PFXNAA4-[2-30/1]-F[3-50/1]-N[4-8/1] |
| E-PFXNAA4A-[2-30/1]-F[3-50/1]-N[4-8/1] |
| E-PFXNAA5-[2-30/1]-F[3-50/1]-N[5-10/1] |
| E-PFXNAA5A-[2-30/1]-F[3-50/1]-N[5-10/1] |
| E-PFXNAA6-[2-60/1]-F[5-100/1]-N[6-12/1] |
| E-PFXNAA6A-[2-60/1]-F[5-100/1]-N[6-12/1] |
| E-PFXNAA8-[2-60/1]-F[5-100/1]-N[8-16/1] |
| E-PFXNAA8A-[2-60/1]-F[5-100/1]-N[8-16/1] |
| E-PFXNAA10-[2-60/1]-F[5-100/1]-N[10-20/1] |
| E-PFXNAA10A-[2-60/1]-F[5-100/1]-N[10-20/1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Shaft Diameter (mm) (mm) | Material | Surface Treatment | Hardness | Thread Length N (mm) | Material | Thread Length Ordering Code | M (Coarse) | H Dimension (mm) | Thread Length N (mm) | Shaft Shoulder Dimension | F (mm) | Y (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 7 Day(s) | 3 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 3 | 7 | 4.5 | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 3 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 3 | 11 | 4.5 | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 4 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 4 | 8 | 6 | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 4 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 4 | 12 | 6 | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 5 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 5 | 9 | 7.5 | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 5 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 5 | 13 | 7.5 | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 6 | 10 | 9 | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 6 | 14 | 9 | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 8 | 12 | 12 | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 8 | 16 | 12 | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 10 | 15 | 15 | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 10 | 20 | 15 | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 12 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 12 | 17 | 18 | Standard | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 12 | 20 | 18 | Standard | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 3 | Steel | Black Oxide | Hardness Not Spec-designed | 3 ～ 6 | General structural steel or carbon steel | Thread Length Configurable | 3 | 7 | - | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 3 | Steel | Black Oxide | Hardness Not Spec-designed | 3 ～ 6 | General structural steel or carbon steel | Thread Length Configurable | 3 | 11 | - | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 4 | Steel | Black Oxide | Hardness Not Spec-designed | 4 ～ 8 | General structural steel or carbon steel | Thread Length Configurable | 4 | 8 | - | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 4 | Steel | Black Oxide | Hardness Not Spec-designed | 4 ～ 8 | General structural steel or carbon steel | Thread Length Configurable | 4 | 12 | - | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 5 | Steel | Black Oxide | Hardness Not Spec-designed | 5 ～ 10 | General structural steel or carbon steel | Thread Length Configurable | 5 | 9 | - | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 5 | Steel | Black Oxide | Hardness Not Spec-designed | 5 ～ 10 | General structural steel or carbon steel | Thread Length Configurable | 5 | 13 | - | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Black Oxide | Hardness Not Spec-designed | 6 ～ 12 | General structural steel or carbon steel | Thread Length Configurable | 6 | 10 | - | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Black Oxide | Hardness Not Spec-designed | 6 ～ 12 | General structural steel or carbon steel | Thread Length Configurable | 6 | 14 | - | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Black Oxide | Hardness Not Spec-designed | 8 ～ 16 | General structural steel or carbon steel | Thread Length Configurable | 8 | 12 | - | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Black Oxide | Hardness Not Spec-designed | 8 ～ 16 | General structural steel or carbon steel | Thread Length Configurable | 8 | 16 | - | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Black Oxide | Hardness Not Spec-designed | 10 ～ 20 | General structural steel or carbon steel | Thread Length Configurable | 10 | 15 | - | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Black Oxide | Hardness Not Spec-designed | 10 ～ 20 | General structural steel or carbon steel | Thread Length Configurable | 10 | 20 | - | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 12 | Steel | Black Oxide | Hardness Not Spec-designed | 12 ～ 24 | General structural steel or carbon steel | Thread Length Configurable | 12 | 17 | - | Standard | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Steel | Black Oxide | Hardness Not Spec-designed | 12 ～ 24 | General structural steel or carbon steel | Thread Length Configurable | 12 | 20 | - | Standard | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Black Oxide | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 6 | 10 | 9 | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Black Oxide | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 6 | 14 | 9 | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Black Oxide | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 8 | 12 | 12 | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Black Oxide | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 8 | 16 | 12 | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Black Oxide | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 10 | 15 | 15 | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Black Oxide | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 10 | 20 | 15 | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 3 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 3 | 7 | 4.5 | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 3 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 3 | 11 | 4.5 | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 4 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 4 | 8 | 6 | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 4 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 4 | 12 | 6 | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 5 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 5 | 9 | 7.5 | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 5 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 5 | 13 | 7.5 | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 6 | 10 | 9 | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 6 | 14 | 9 | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 8 | 12 | 12 | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 8 | 16 | 12 | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 10 | 15 | 15 | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 10 | 20 | 15 | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 12 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 12 | 17 | 18 | Standard | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 12 | 20 | 18 | Standard | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 3 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 3 ～ 6 | General structural steel or carbon steel | Thread Length Configurable | 3 | 7 | - | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 3 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 3 ～ 6 | General structural steel or carbon steel | Thread Length Configurable | 3 | 11 | - | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 4 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 4 ～ 8 | General structural steel or carbon steel | Thread Length Configurable | 4 | 8 | - | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 4 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 4 ～ 8 | General structural steel or carbon steel | Thread Length Configurable | 4 | 12 | - | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 5 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 5 ～ 10 | General structural steel or carbon steel | Thread Length Configurable | 5 | 9 | - | Standard | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 5 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 5 ～ 10 | General structural steel or carbon steel | Thread Length Configurable | 5 | 13 | - | Widened | 3 ～ 50 | 2 ～ 30 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 6 ～ 12 | General structural steel or carbon steel | Thread Length Configurable | 6 | 10 | - | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 6 ～ 12 | General structural steel or carbon steel | Thread Length Configurable | 6 | 14 | - | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 8 ～ 16 | General structural steel or carbon steel | Thread Length Configurable | 8 | 12 | - | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 8 ～ 16 | General structural steel or carbon steel | Thread Length Configurable | 8 | 16 | - | Widened | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 10 ～ 20 | General structural steel or carbon steel | Thread Length Configurable | 10 | 15 | - | Standard | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 10 ～ 20 | General structural steel or carbon steel | Thread Length Configurable | 10 | 20 | - | Widened | 5 ～ 100 | 2 ～ 60 |
Loading...
Basic Information
| Shaft Retaining Method | Threaded (Lock Nut) | Retainer Shape | Wrench Flats | Bearing Retaining Method | With Retaining Ring Grooves |
|---|
Specification/Dimensions
-
Shaft Diameter (mm)(mm)
-
Material
- Steel
- Stainless Steel
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
-
Hardness
- Hardness Spec-designed
- Hardness Not Spec-designed
-
Thread Length N(mm)
-
Material
- Tempered steel hardness HRC30～
- Austenitic stainless steel
- General structural steel or carbon steel
-
Thread Length Ordering Code
- Thread Length Configurable
- Thread Length Selectable
-
M (Coarse)
- 3
- 4
- 5
- 6
- 8
- 10
- 12
-
H Dimension(mm)
-
Thread Length N(mm)
- 4.5
- 6
- 7.5
- 9
- 12
- 15
- 18
-
Shaft Shoulder Dimension
- Standard
- Widened
-
F(mm)
-
Y(mm)
-
type
- E-FXAA
- E-FXNAA
- E-HFXAA
- E-PFXAA
- E-PFXNAA
- E-SFXAA
- E-SFXNAA
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 7 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Cantilever Shafts - Threaded with Retaining Ring Groove - Standard
- Cantilever Shafts - Threaded with Threaded End - Standard
- Cantilever Shafts - Piloted Thread with Threaded Ends - Standard
- Cantilever Shafts - Screw Mount with Threaded End - Hex
- Cantilever Shafts - Shouldered - Screw Mount
- [Clean & Pack] Cantilever Shaft - Threaded with Retaining Ring Groove, Standard
- Cantilever Shaft Screw Mount, Tapped End
- Cantilever Shaft Hex Head, Retaining Ring Groove
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy