(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Cantilever Shafts Standard, Tapped End
MiSUMi Economy
- RoHS
Part Number
Configured Part Number is shown.
Product Overview
The cantilever pin can be used as the pivot point of rotary parts such as idlers. The pivot point is similar to the axis of a hinge, and the connected parts can make rotary movements.
Dimensional Drawing
Specifications Overview
| Type | d[Φ:mm] |  Equivalent Material |  Surface Treatment | |
| Thread Length Fixed | Thread Length Configurable | |||
| E-FXAB | E-FXNAB | 4~18 | General structural steel or carbon steel | Ferroferric Oxide Protective Film |
| E-PFXAB | E-PFXNAB | Electroless Nickel Plating | ||
| E-SFXAB | E-SFXNAB | Austenitic stainless steel | － | |
| E-PHFXAB | － | Tempered steel hardness HRC30～ | Electroless Nickel Plating | |
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel and with surface treatment of electroless nickel plating.Specification Table
| Part Number | Dg7 | 1mm increments | MA (Coarse Thread) Selection | H | W | M (Coarse Thread) | ||||
| Type | No. | Y | F | N | ||||||
| Thread Length Fixed E-FXAB E-PFXAB E-SFXAB E-PHFXAB Thread Length Configurable E-FXNAB E-PFXNAB E-SFXNAB | 6 | 6 | -0.004 -0.016 | 2~60 | 5~100 | 6~12 | 3 | 10 | 8 | M 6 |
| 6A | 14 | 12 | ||||||||
| 8 | 8 | -0.005 -0.020 | 8~16 | 4 | 12 | 10 | M 8 | |||
| 8A | 16 | 14 | ||||||||
| 10 | 10 | 10~20 | 4 5 6 | 15 | 13 | M10 | ||||
| 10A | 20 | 17 | ||||||||
| 12 | 12 | -0.006 -0.024 | 10~150 | 12~24 | 5 6 8 | 17 | 14 | M12 | ||
| 13 | 13 | 18 | 15 | |||||||
| 15 | 15 | 6 8 10 | 20 | 17 | ||||||
| 16 | 16 | 21 | 18 | |||||||
| 17 | 17 | 22 | 19 | |||||||
| 18 | 18 | 23 | 20 | |||||||
Table 1
| MA | Y＋F |
| M 3 | Y＋F≥11.5 |
| M 4 | Y＋F≥14.0 |
| M 5 | Y＋F≥16.2 |
| M 6 | Y＋F≥18.5 |
| M 8 | Y＋F≥23.5 |
| M10 | Y＋F≥28.5 |
| M12 | Y＋F≥35.5 |
| M16 | Y＋F≥45.0 |
| M20 | Y＋F≥55.0 |
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel and with surface treatment of electroless nickel plating.N is available for Thread Length Configurable Type only.Product Features
Feature 1: It has a tolerance of g7 and is used in conjunction with idlers, pulleys, sprockets, etc.
Feature 2: Available in various shapes. The product types include Threaded with Retaining Ring Groove type, Threaded Tapped End type, Inlay Threaded Threaded End type, Bolt Mounted Tapped End type, Flanged type, etc.
Feature 3: Products made of stainless steel (austenitic stainless steel) with excellent anti-rust performance and products with the surface treatment of electroless nickel plating are available for selection to solve the problem of rusting.
Feature 4: L Dimension Configurable type, freely selectable in 1mm increments to accommodate different use environments.
Feature 5: Thread length fixed type with relative low price is available.
Feature 2: Available in various shapes. The product types include Threaded with Retaining Ring Groove type, Threaded Tapped End type, Inlay Threaded Threaded End type, Bolt Mounted Tapped End type, Flanged type, etc.
Feature 3: Products made of stainless steel (austenitic stainless steel) with excellent anti-rust performance and products with the surface treatment of electroless nickel plating are available for selection to solve the problem of rusting.
Feature 4: L Dimension Configurable type, freely selectable in 1mm increments to accommodate different use environments.
Feature 5: Thread length fixed type with relative low price is available.
Precautions
①Anti-rust specification selection and maintenance
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel and with surface treatment of electroless nickel plating.
Products without surface treatment need to be applied antirust oil regularly for maintenance.
②For dimensions of male thread relief groove, refer to the Specification Table.
③For dimensions of MY, Y and F, refer to 【Table 1】 in the Specification Table.
If there are requirements for rust prevention, give priority to products made of austenitic stainless steel and with surface treatment of electroless nickel plating.
Products without surface treatment need to be applied antirust oil regularly for maintenance.
②For dimensions of male thread relief groove, refer to the Specification Table.
③For dimensions of MY, Y and F, refer to 【Table 1】 in the Specification Table.
Example of Use
Equipment Name:
Tape tension adjustment mechanism
Design purpose:
A mechanism that keeps tension constant by utilizing the smooth lifting and lowering motion of a linear guide to absorb the speed difference between unwinding side and winding side.
Parts Application Description:
Cantilever pin is used in conjunction with timing pulley to adjust the tape tensioning force.
For detailed information, click
Example of Use.
Tape tension adjustment mechanism
Design purpose:
A mechanism that keeps tension constant by utilizing the smooth lifting and lowering motion of a linear guide to absorb the speed difference between unwinding side and winding side.
Parts Application Description:
Cantilever pin is used in conjunction with timing pulley to adjust the tape tensioning force.
For detailed information, click
Example of Use.Application Industries
| Electronic & Electrical | Automotive | Lithium battery | ||
 |  |  | ||
| Robotics | Smart Phones | Semiconductor | ||
 |  |  |
Related Products
| Idlers Belt Backside Tensioning Type | Timing Pulleys T10 | Economy series Toothed Timing Belts | ||
 |  |  | ||
| Representative model: AFBD9-20 | Representative model: TTPA22T10150-A-P24 | Representative model: C-HTBN400S2M-40 | ||
| Advantages: stable quality, short delivery time, multiple specifications | Advantages: industry standard, short delivery time, multiple types | Advantages: rich variety of specifications, high cost performance. |
Related Documents
For anti-rust performance of metal materials and surface treatment, refer to Anti-Rust Performance
For applicable tightening torque for the bolts, refer toTightening Torque
For strength of bolt, refer toBolt Strength
Anti-Rust PerformanceFor applicable tightening torque for the bolts, refer to
Tightening TorqueFor strength of bolt, refer to
Bolt StrengthPart Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-FXAB6-[2-60/1]-F[5-100/1]-MA3 |
| E-FXAB6A-[2-60/1]-F[5-100/1]-MA3 |
| E-FXAB8-[2-60/1]-F[5-100/1]-MA4 |
| E-FXAB8A-[2-60/1]-F[5-100/1]-MA4 |
| E-FXAB10-[2-60/1]-F[5-100/1]-MA[4,5,6] |
| E-FXAB10A-[2-60/1]-F[5-100/1]-MA[4,5,6] |
| E-FXAB12-[2-60/1]-F[10-150/1]-MA[5,6,8] |
| E-FXAB13-[2-60/1]-F[10-150/1]-MA[5,6,8] |
| E-FXAB15-[2-60/1]-F[10-150/1]-MA[6,8,10] |
| E-FXAB16-[2-60/1]-F[10-150/1]-MA[6,8,10] |
| E-FXAB17-[2-60/1]-F[10-150/1]-MA[6,8,10] |
| E-FXAB18-[2-60/1]-F[10-150/1]-MA[6,8,10] |
| E-FXNAB6-[2-60/1]-F[5-100/1]-N[6-12/1]-MA3 |
| E-FXNAB6A-[2-60/1]-F[5-100/1]-N[6-12/1]-MA3 |
| E-FXNAB8-[2-60/1]-F[5-100/1]-N[8-16/1]-MA4 |
| E-FXNAB8A-[2-60/1]-F[5-100/1]-N[8-16/1]-MA4 |
| E-FXNAB10-[2-60/1]-F[5-100/1]-N[10-20/1]-MA[4,5,6] |
| E-FXNAB10A-[2-60/1]-F[5-100/1]-N[10-20/1]-MA[4,5,6] |
| E-FXNAB12-[2-60/1]-F[10-150/1]-N[12-24/1]-MA[5,6,8] |
| E-FXNAB15-[2-60/1]-F[10-150/1]-N[12-24/1]-MA[6,8,10] |
| E-PFXAB6-[2-60/1]-F[5-100/1]-MA3 |
| E-PFXAB6A-[2-60/1]-F[5-100/1]-MA3 |
| E-PFXAB8-[2-60/1]-F[5-100/1]-MA4 |
| E-PFXAB8A-[2-60/1]-F[5-100/1]-MA4 |
| E-PFXAB10-[2-60/1]-F[5-100/1]-MA[4,5,6] |
| E-PFXAB10A-[2-60/1]-F[5-100/1]-MA[4,5,6] |
| E-PFXAB12-[2-60/1]-F[10-150/1]-MA[5,6,8] |
| E-PFXAB13-[2-60/1]-F[10-150/1]-MA[5,6,8] |
| E-PFXAB15-[2-60/1]-F[10-150/1]-MA[6,8,10] |
| E-PFXAB16-[2-60/1]-F[10-150/1]-MA[6,8,10] |
| E-PFXAB17-[2-60/1]-F[10-150/1]-MA[6,8,10] |
| E-PFXAB18-[2-60/1]-F[10-150/1]-MA[6,8,10] |
| E-PFXNAB6-[2-60/1]-F[5-100/1]-N[6-12/1]-MA3 |
| E-PFXNAB6A-[2-60/1]-F[5-100/1]-N[6-12/1]-MA3 |
| E-PFXNAB8-[2-60/1]-F[5-100/1]-N[8-16/1]-MA4 |
| E-PFXNAB8A-[2-60/1]-F[5-100/1]-N[8-16/1]-MA4 |
| E-PFXNAB10-[2-60/1]-F[5-100/1]-N[10-20/1]-MA[4,5,6] |
| E-PFXNAB10A-[2-60/1]-F[5-100/1]-N[10-20/1]-MA[4,5,6] |
| E-PFXNAB12-[2-60/1]-F[10-150/1]-N[12-24/1]-MA[5,6,8] |
| E-PFXNAB15-[2-60/1]-F[10-150/1]-N[12-24/1]-MA[6,8,10] |
| E-PHFXAB6-[2-60/1]-F[5-100/1]-MA3 |
| E-PHFXAB6A-[2-60/1]-F[5-100/1]-MA3 |
| E-PHFXAB8-[2-60/1]-F[5-100/1]-MA4 |
| E-PHFXAB8A-[2-60/1]-F[5-100/1]-MA4 |
| E-PHFXAB10-[2-60/1]-F[5-100/1]-MA[4,5,6] |
| E-PHFXAB10A-[2-60/1]-F[5-100/1]-MA[4,5,6] |
| E-PHFXAB12-[2-60/1]-F[10-150/1]-MA[5,6,8] |
| E-PHFXAB13-[2-60/1]-F[10-150/1]-MA[5,6,8] |
| E-PHFXAB15-[2-60/1]-F[10-150/1]-MA[6,8,10] |
| E-PHFXAB16-[2-60/1]-F[10-150/1]-MA[6,8,10] |
| E-PHFXAB17-[2-60/1]-F[10-150/1]-MA[6,8,10] |
| E-PHFXAB18-[2-60/1]-F[10-150/1]-MA[6,8,10] |
| E-SFXAB6-[2-60/1]-F[5-100/1]-MA3 |
| E-SFXAB6A-[2-60/1]-F[5-100/1]-MA3 |
| E-SFXAB8-[2-60/1]-F[5-100/1]-MA4 |
| E-SFXAB8A-[2-60/1]-F[5-100/1]-MA4 |
| E-SFXAB10-[2-60/1]-F[5-100/1]-MA[4,5,6] |
| E-SFXAB10A-[2-60/1]-F[5-100/1]-MA[4,5,6] |
| E-SFXAB12-[2-60/1]-F[10-150/1]-MA[5,6,8] |
| E-SFXAB13-[2-60/1]-F[10-150/1]-MA[5,6,8] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Shaft Diameter (mm) (mm) | Material | Surface Treatment | Hardness | Thread Length N (mm) | Material | Thread Length Ordering Code | M (Coarse) | H Dimension (mm) | Thread Length N (mm) | Shaft Shoulder Dimension | Selects thread diameter [MA] | F (mm) | Y (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 6 | 10 | 9 | Standard | 3 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 6 | 14 | 9 | Widened | 3 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 8 | 12 | 12 | Standard | 4 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 8 | 16 | 12 | Widened | 4 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 10 | 15 | 15 | Standard | 4 ～ 6 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 10 | 20 | 15 | Widened | 4 ～ 6 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 12 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 12 | 17 | 18 | Standard | 5 ～ 8 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 13 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 12 | 18 | 18 | Standard | 5 ～ 8 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 12 | 20 | 18 | Standard | 6 ～ 10 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 16 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 12 | 21 | 18 | Standard | 6 ～ 10 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 17 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 12 | 22 | 18 | Standard | 6 ～ 10 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 18 | Steel | Black Oxide | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 12 | 23 | 18 | Standard | 6 ～ 10 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Black Oxide | Hardness Not Spec-designed | 6 ～ 12 | General structural steel or carbon steel | Thread Length Configurable | 6 | 10 | - | Standard | 3 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Black Oxide | Hardness Not Spec-designed | 6 ～ 12 | General structural steel or carbon steel | Thread Length Configurable | 6 | 14 | - | Widened | 3 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Black Oxide | Hardness Not Spec-designed | 8 ～ 16 | General structural steel or carbon steel | Thread Length Configurable | 8 | 12 | - | Standard | 4 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Black Oxide | Hardness Not Spec-designed | 8 ～ 16 | General structural steel or carbon steel | Thread Length Configurable | 8 | 16 | - | Widened | 4 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Black Oxide | Hardness Not Spec-designed | 10 ～ 20 | General structural steel or carbon steel | Thread Length Configurable | 10 | 15 | - | Standard | 4 ～ 6 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Black Oxide | Hardness Not Spec-designed | 10 ～ 20 | General structural steel or carbon steel | Thread Length Configurable | 10 | 20 | - | Widened | 4 ～ 6 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 12 | Steel | Black Oxide | Hardness Not Spec-designed | 12 ～ 24 | General structural steel or carbon steel | Thread Length Configurable | 12 | 17 | - | Standard | 5 ～ 8 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Steel | Black Oxide | Hardness Not Spec-designed | 12 ～ 24 | General structural steel or carbon steel | Thread Length Configurable | 12 | 20 | - | Standard | 6 ～ 10 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 6 | 10 | 9 | Standard | 3 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 6 | 14 | 9 | Widened | 3 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 8 | 12 | 12 | Standard | 4 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 8 | 16 | 12 | Widened | 4 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 10 | 15 | 15 | Standard | 4 ～ 6 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 10 | 20 | 15 | Widened | 4 ～ 6 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 12 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 12 | 17 | 18 | Standard | 5 ～ 8 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 13 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 12 | 18 | 18 | Standard | 5 ～ 8 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 12 | 20 | 18 | Standard | 6 ～ 10 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 16 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 12 | 21 | 18 | Standard | 6 ～ 10 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 17 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 12 | 22 | 18 | Standard | 6 ～ 10 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 18 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | - | General structural steel or carbon steel | Thread Length Selectable | 12 | 23 | 18 | Standard | 6 ～ 10 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 6 ～ 12 | General structural steel or carbon steel | Thread Length Configurable | 6 | 10 | - | Standard | 3 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 6 ～ 12 | General structural steel or carbon steel | Thread Length Configurable | 6 | 14 | - | Widened | 3 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 8 ～ 16 | General structural steel or carbon steel | Thread Length Configurable | 8 | 12 | - | Standard | 4 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 8 ～ 16 | General structural steel or carbon steel | Thread Length Configurable | 8 | 16 | - | Widened | 4 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 10 ～ 20 | General structural steel or carbon steel | Thread Length Configurable | 10 | 15 | - | Standard | 4 ～ 6 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 10 ～ 20 | General structural steel or carbon steel | Thread Length Configurable | 10 | 20 | - | Widened | 4 ～ 6 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 12 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 12 ～ 24 | General structural steel or carbon steel | Thread Length Configurable | 12 | 17 | - | Standard | 5 ～ 8 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Steel | Electroless Nickel Plating | Hardness Not Spec-designed | 12 ～ 24 | General structural steel or carbon steel | Thread Length Configurable | 12 | 20 | - | Standard | 6 ～ 10 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Electroless Nickel Plating | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 6 | 10 | 9 | Standard | 3 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Steel | Electroless Nickel Plating | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 6 | 14 | 9 | Widened | 3 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Electroless Nickel Plating | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 8 | 12 | 12 | Standard | 4 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Steel | Electroless Nickel Plating | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 8 | 16 | 12 | Widened | 4 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Electroless Nickel Plating | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 10 | 15 | 15 | Standard | 4 ～ 6 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Steel | Electroless Nickel Plating | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 10 | 20 | 15 | Widened | 4 ～ 6 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 12 | Steel | Electroless Nickel Plating | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 12 | 17 | 18 | Standard | 5 ～ 8 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 13 | Steel | Electroless Nickel Plating | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 12 | 18 | 18 | Standard | 5 ～ 8 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 15 | Steel | Electroless Nickel Plating | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 12 | 20 | 18 | Standard | 6 ～ 10 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 16 | Steel | Electroless Nickel Plating | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 12 | 21 | 18 | Standard | 6 ～ 10 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 17 | Steel | Electroless Nickel Plating | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 12 | 22 | 18 | Standard | 6 ～ 10 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 18 | Steel | Electroless Nickel Plating | Hardness Spec-designed | - | Tempered steel hardness HRC30～ | Thread Length Selectable | 12 | 23 | 18 | Standard | 6 ～ 10 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Stainless Steel | Not Provided | Hardness Not Spec-designed | - | Austenitic stainless steel | Thread Length Selectable | 6 | 10 | 9 | Standard | 3 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 6 | Stainless Steel | Not Provided | Hardness Not Spec-designed | - | Austenitic stainless steel | Thread Length Selectable | 6 | 14 | 9 | Widened | 3 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Stainless Steel | Not Provided | Hardness Not Spec-designed | - | Austenitic stainless steel | Thread Length Selectable | 8 | 12 | 12 | Standard | 4 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 8 | Stainless Steel | Not Provided | Hardness Not Spec-designed | - | Austenitic stainless steel | Thread Length Selectable | 8 | 16 | 12 | Widened | 4 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Stainless Steel | Not Provided | Hardness Not Spec-designed | - | Austenitic stainless steel | Thread Length Selectable | 10 | 15 | 15 | Standard | 4 ～ 6 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Stainless Steel | Not Provided | Hardness Not Spec-designed | - | Austenitic stainless steel | Thread Length Selectable | 10 | 20 | 15 | Widened | 4 ～ 6 | 5 ～ 100 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 12 | Stainless Steel | Not Provided | Hardness Not Spec-designed | - | Austenitic stainless steel | Thread Length Selectable | 12 | 17 | 18 | Standard | 5 ～ 8 | 10 ～ 150 | 2 ～ 60 | ||
- | 1 Piece(s) | 7 Day(s) | 13 | Stainless Steel | Not Provided | Hardness Not Spec-designed | - | Austenitic stainless steel | Thread Length Selectable | 12 | 18 | 18 | Standard | 5 ～ 8 | 10 ～ 150 | 2 ～ 60 |
Loading...
Basic Information
| Shaft Retaining Method | Threaded (Lock Nut) | Retainer Shape | Wrench Flats | Bearing Retaining Method | Tapped (Screw) |
|---|
Specification/Dimensions
-
Shaft Diameter (mm)(mm)
-
Material
- Steel
- Stainless Steel
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
-
Hardness
- Hardness Spec-designed
- Hardness Not Spec-designed
-
Thread Length N(mm)
-
Material
- Tempered steel hardness HRC30～
- Austenitic stainless steel
- General structural steel or carbon steel
-
Thread Length Ordering Code
- Thread Length Configurable
- Thread Length Selectable
-
M (Coarse)
- 6
- 8
- 10
- 12
-
H Dimension(mm)
-
Thread Length N(mm)
- 9
- 12
- 15
- 18
-
Shaft Shoulder Dimension
- Standard
- Widened
-
Selects thread diameter [MA]
-
F(mm)
-
Y(mm)
-
type
- E-FXAB
- E-FXNAB
- E-PFXAB
- E-PFXNAB
- E-PHFXAB
- E-SFXAB
- E-SFXNAB
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 7 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Cantilever Shafts - Threaded with Threaded Ends - Hex
- Cantilever Shafts - Piloted Thread with Tapped End - Standard
- Cantilever Shafts - Screw Mount with Threaded End - Standard
- Cantilever Shafts - Screw Mount with Retaining Ring Groove - Stepped
- Cantilever Shafts - Screw Mount with Tapped End - Stepped
- Cantilever Shafts - Shouldered - Screw Mount
- [Clean & Pack] Cantilever Shaft - Flanged, Lock Nut
- Cantilever Shaft Screw Mount, Tapped End
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy