(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Shaft Supports Flanged Mount - Thickened type - Standard Sleeves/Long Sleeves (E-STHCN8)
- Volume Discount
MiSUMi Economy
This is an economy item, The price is cheaper than the MISUMI standard product.
Part Number
Configured Part Number is shown.
E-STHCN8
Product Overview
The shaft support can support and fix the shaft and also bear a certain load.
Dimensional Drawing
Specification Table
■Material Specification Table
If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating.
Hex socket bolts are not included. If bolts are required, please refer to the additional machining options at the bottom of the specifications table.
When the fixed plate has low strength or is relatively thin, it is recommended to use the mounting hole screw type.
■ Dimension Specification Table
The long guide type is only applicable to D sizes marked with an * symbol.
| Part Number | Round Flange | Both Surfaces Cut Flange |  Material |  Surface Treatment |
| Standard | E-STHRBN | E-STHCBN | Structural steel or carbon steel are generally used | Black Oxide |
| E-STHRN | E-STHCN | Electroless Nickel Plating | ||
| Long Guide Type | E-STHRBNL | E-STHCBNL | Structural steel or carbon steel are generally used | Black Oxide |
| E-STHRNL | E-STHCNL | Electroless Nickel Plating |
If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating.Hex socket bolts are not included. If bolts are required, please refer to the additional machining options at the bottom of the specifications table.When the fixed plate has low strength or is relatively thin, it is recommended to use the mounting hole screw type.■ Dimension Specification Table
| Part Number | Sleeve Thickness (N) | L | L1 | D1 | H | T | ℓ | ℓ1 | M (Coarse Thread) | P | W | P1 | F | d1 | ||||
| Type | DH8 | |||||||||||||||||
| Standard | 8 | +0.022 0 | 3.5 | 16 | - | 15 | 32 | 5 | 10 | - | M3 | 25 | 15 | 25 | - | 3.5 | ||
| Round Flange | Both Surfaces Cut Flange | 10 | 5 | 20 | 20 | 38 | 12 | M3 | 30 | 20 | 30 | 4.5 | ||||||
| E-STHRBN | E-STHCBN | * 12 | +0.027 0 | 24 | 30 | 22 | 40 | 6 | 15 | 15 | M4 | 32 | 25 | 28 | 16 | |||
| E-STHRN | E-STHCN | 15 | 5.5 | 30 | - | 26 | 48 | 18 | - | 38 | 29 | 32 | 18 | 5.5 | ||||
| *16 | 6 | 32 | 48 | 28 | 50 | 19 | 16 | 40 | 32 | 33 | 22 | |||||||
| *20 | +0.033 0 | 7.5 | 35 | 63 | 8 | 20 | M5 | 50 | 40 | 42 | 25 | 6.6 | ||||||
| * 25 | 38 | 57 | 40 | 68 | 23 | 19 | 55 | 45 | 45 | 30 | ||||||||
| Long Guide Type (only D size with *1 symbol) | *30 | 45 | 73 | 10 | 24 | M6 | 60 | 50 | 48 | 35 | ||||||||
| E-STHRBNL | E-STHCBNL | * 35 | +0.039 0 | 10 | 50 | 75 | 55 | 89 | 30 | 25 | 72 | 61 | 58 | 42 | 9 | |||
| E-STHRNL | E-STHCNL | *40 | 15 | 70 | 104 | 12 | M8 | 87 | 76 | 68 | 54 | |||||||
| * 50 | 80 | 114 | 97 | 86 | 73 | 64 | ||||||||||||
The long guide type is only applicable to D sizes marked with an * symbol.Product Features
Feature 1: After surface treatment, the inner diameter tolerance of the guide shaft support can still meet the H8 tolerance. When used together with the g7 tolerance guide shaft, the fit is worry-free.
Feature 2: For installation environments where the fixed plate has low strength (such as aluminum alloy) or is too thin for thread processing, we recommend using the threaded mounting hole type of standard guide shaft support for quick installation.
Feature 3: Compared to the standard type, the long guide type has a longer fitting section with the guide shaft, resulting in significantly improved retention and support.
Feature 4: the gap of the installation hole (through hole) can be used for fine adjustment, and the on-site positioning can be realized.
Feature 5: Vertical accuracy can reach 0.02, suitable for precise positioning and easy installation.
Feature 6: Various flange shapes are available, including round, square, and compact flange types; choosing the compact flange type enables space-saving designs.
Feature 2: For installation environments where the fixed plate has low strength (such as aluminum alloy) or is too thin for thread processing, we recommend using the threaded mounting hole type of standard guide shaft support for quick installation.
Feature 3: Compared to the standard type, the long guide type has a longer fitting section with the guide shaft, resulting in significantly improved retention and support.
Feature 4: the gap of the installation hole (through hole) can be used for fine adjustment, and the on-site positioning can be realized.
Feature 5: Vertical accuracy can reach 0.02, suitable for precise positioning and easy installation.
Feature 6: Various flange shapes are available, including round, square, and compact flange types; choosing the compact flange type enables space-saving designs.
Precautions
When locking the guide shaft with a set screw type guide shaft support, the locking action of the set screw may damage the guide shaft.
Slit shaft support can be connected without damaging the shaft.
Slit shaft support can be connected without damaging the shaft.
Example of Use
Equipment Name:
Simple Manual Characteristic Inspection Mechanism
Key Points of Mechanism Design:
Manual inspection fixture for electrical characteristics, suitable for small batch production. Pull out the workpiece guide rail and move it to the fixed inspection position after placing the workpiece. Use the operating lever to control the lifting and lowering of the inspection device to check the electrical characteristics of the workpiece.
Function of shaft supports:
shaft supports are used to fix the inspection mechanism for easy disassembly, and related mechanisms can be reused.
For more information, please click Simple Manual Feature Inspection Mechanism.
Simple Manual Characteristic Inspection Mechanism
Key Points of Mechanism Design:
Manual inspection fixture for electrical characteristics, suitable for small batch production. Pull out the workpiece guide rail and move it to the fixed inspection position after placing the workpiece. Use the operating lever to control the lifting and lowering of the inspection device to check the electrical characteristics of the workpiece.
Function of shaft supports:
shaft supports are used to fix the inspection mechanism for easy disassembly, and related mechanisms can be reused.
For more information, please click Simple Manual Feature Inspection Mechanism.
Related Products
| Guide shaft Straight bar type | Linear bearing with flange Single liner standard | Post Clamp | ||
 |  |  | ||
| Typical model: SFJ6-100 | Typical model: LHFC8 | Typical model: KDST20 |
Related Documents
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Basic Information
| Shape | Flanged Type | Shaft Securing Method | Set Screw | Material | General structural steel or carbon steel |
|---|---|---|---|---|---|
| Type | Machined Product | Thickness | Wide | Dowel Hole | N/A |
| Clamp Lever | N/A |
Please check the type/dimensions/specifications of the part E-STHCN8 in the Shaft Supports Flanged Mount - Thickened type - Standard Sleeves/Long Sleeves series.
Specification/Dimensions
-
type
- E-STHCBN
- E-STHCBNL
- E-STHCN
- E-STHCNL
- E-STHRBN
- E-STHRBNL
- E-STHRN
- E-STHRNL
-
Hole Dia. D(Ø)
-
Surface Treatment
- Black Oxide
- Electroless Nickel Plating
-
Flange Shape/Type
- Standard
- Long Sleeve
-
Flange Shape
- Compact Flanged
- Round Flanged
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| E-STHCBN16 |
| E-STHCBN20 |
| E-STHCBN25 |
| E-STHCNL12 |
| E-STHCNL16 |
| E-STHCNL20 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Hole Dia. D (Ø) | Surface Treatment | Flange Shape/Type | Flange Shape |
|---|---|---|---|---|---|---|---|---|
MYR 58.78 | 1 Piece(s) | Available | 6 Day(s) | 16 | Black Oxide | Standard | Compact Flanged | |
MYR 59.45 | 1 Piece(s) | Available | 6 Day(s) | 20 | Black Oxide | Standard | Compact Flanged | |
MYR 65.27 | 1 Piece(s) | Available | 6 Day(s) | 25 | Black Oxide | Standard | Compact Flanged | |
MYR 52.85 | 1 Piece(s) | Available | 6 Day(s) | 12 | Electroless Nickel Plating | Long Sleeve | Compact Flanged | |
MYR 63.76 | 1 Piece(s) | Available | 6 Day(s) | 16 | Electroless Nickel Plating | Long Sleeve | Compact Flanged | |
MYR 71.23 | 1 Piece(s) | Available | 6 Day(s) | 20 | Electroless Nickel Plating | Long Sleeve | Compact Flanged |
Additional Products in this Category
- Shaft Supports - Flanged Slit (Cast Type) - Long Sleeve
- Shaft Supports Flanged Mount - Standard - Standard Through/Tapped Mounting Holes / Long Sleeve
- Shaft Supports Flanged Mount - Standard - With Dowel Holes
- Shaft Supports Flanged Mount - Compact Standard / Compact Long Sleeve
- Shaft Supports Compact Type (Machined) - Set Screw
- Shaft Supports Bottom Mount Set Screw (Machined) - Wide
- Shaft Supports T-Shaped with Side Slit
- Shaft Support, SHF Series (Aluminum)
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy