(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Indexing Plungers Standard, Fine Thread (E-LPXAS12)
Click this image to zoom it.
Move the mouse over the image to zoom
Part Number
Configured Part Number is shown.
E-LPXAS12
Product Overview
Indexing Plungers Standard, Fine Thread
·This series is MISUMI indexing plunger (economy series), which is also called indexing pin, spring draw pin, etc.
·Indexing plunger, also called indexing pin, spring draw pin, etc., is a locating pin that can be inserted and extracted manually.
·Due to the structural characteristics and design purpose of the indexing plunger, the main part under force is the pin head, which can be subjected to shear loads and bending loads.
The internal connecting rod and handle part can only be subjected to tension along the axial direction, not subjected to radial force, i.e., not to be pulled out obliquely, not pressing down and lifting up the handle when pulled out horizontally.
·This series is MISUMI indexing plunger (economy series), which is also called indexing pin, spring draw pin, etc.
·Indexing plunger, also called indexing pin, spring draw pin, etc., is a locating pin that can be inserted and extracted manually.
·Due to the structural characteristics and design purpose of the indexing plunger, the main part under force is the pin head, which can be subjected to shear loads and bending loads.
The internal connecting rod and handle part can only be subjected to tension along the axial direction, not subjected to radial force, i.e., not to be pulled out obliquely, not pressing down and lifting up the handle when pulled out horizontally.
Dimensional Drawing
Specification Table
Indexing Plungers Standard, Fine Thread
Material Specification
| Part Number | Thread Pitch (Fine) | B | S | D | L | L1 | L2 | L3 | L4 | SW1 | SW2 | Load (N) | ||
| Type | M | |||||||||||||
| min. | max. | |||||||||||||
| (Reset type) E-LPXAS E-LPXKS E-LSXPAS E-LSXPKS | 10 | 1 | 5 | 5 | 21 | 45 | 17 | 5 | 15 | 5 | 12 | 16 | 8 | 15 |
| 12 | 1.5 | 6 | 6 | 25 | 54 | 20 | 6 | 17 | 6 | 14 | 19 | 10.5 | 17 | |
| 16 | 1.5 | 8 | 8 | 31 | 69 | 26 | 8 | 23 | 8 | 19 | 24 | 15 | 23 | |
| (Self-locking type) E-LPXYAS E-LPXYKS E-LSXYAS E-LSXYKS | 10 | l | 5 | 5 | 21 | 51 | 17 | 5 | 15 | 5 | 12 | 16 | 9.5 | 18.5 |
| 12 | 1.5 | 6 | 6 | 25 | 61 | 20 | 6 | 17 | 6 | 14 | 19 | 11 | 21.5 | |
| 16 | 1.5 | 8 | 7 | 31 | 75.5 | 26 | 8 | 23 | 8 | 19 | 24 | 16.5 | 30.5 | |
Material Specification
| Thread | Type | Knob | Body | Pin | Spring | Nut | |||||
| Reset Type | Self-Locking Type |  Material | Material |  Surface Treatment | Material | Surface Treatment |  Hardness | Material | Material | Surface Treatment | |
| Fine Thread | E-LPXAS | E-LPXYAS | PA6 Plastics | 1215 | Black Oxide | S45C | Black Oxide | 45~55HRC | SUS304 | - | - |
| E-LPXKS | E-LPXYKS | S35C | Black Oxide | ||||||||
| E-LSXPAS | E-LSXYAS | SUS303 | - | SUS303 | - | - | - | ||||
| E-LSXPKS | E-LSXYKS | SUS303 | - | ||||||||
Product Features
·The indexing plunger is easy to operate: the tip head protrudes into position and is released by pulling the handle.
·The indexing plunger can be flexibly installed: Suitable for linear motion and rotary motion mechanisms with positioning requirements, the plunger can be installed using general threads, which facilitates assembly and disassembly.Suitable for fixture indexing, positioning, stop limit and other occasions.
·The indexing plunger can be flexibly installed: Suitable for linear motion and rotary motion mechanisms with positioning requirements, the plunger can be installed using general threads, which facilitates assembly and disassembly.Suitable for fixture indexing, positioning, stop limit and other occasions.
Usage Method
How to operate the reset type and self-locking type
•Reset type
1. The front end is usually protruding.
2. The front end retracts when the knob is pulled out.
3. If the knob is released, the front end will return to the protruding state through the action of the built-in spring force.
•Reset type
1. The front end is usually protruding.
2. The front end retracts when the knob is pulled out.
3. If the knob is released, the front end will return to the protruding state through the action of the built-in spring force.
•Self-locking type
1. The front end is usually protruding.
2. The front end retracts when the knob is pulled out.
3. If the front end is rotated by 90° while maintaining the pull-out state, the retraction state of the front end can be locked.
4. To release the locked state, simply rotate 90° while maintaining the pulled-out state.
5. If the knob is released, the front end will return to the protruding state through the action of the built-in spring force.
1. The front end is usually protruding.
2. The front end retracts when the knob is pulled out.
3. If the front end is rotated by 90° while maintaining the pull-out state, the retraction state of the front end can be locked.
4. To release the locked state, simply rotate 90° while maintaining the pulled-out state.
5. If the knob is released, the front end will return to the protruding state through the action of the built-in spring force.
| Part Number |
|---|
| E-LPXAS12 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Screw Dia. M (mm) | Tip Outer Dia. B (Ø) | Stroke (S) (mm) | Locking Mechanism | Body Material | Length L (mm) | Pin Material | Pin Surface Treatment | Main Body Surface Treatment | Accessories |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 21.42 | 1 Piece(s) | Available | 6 Day(s) | 12 | 6 | 6 | [Returning] Return type | [Steel] Steel | 54 | S45C | Black Oxide | Black Oxide Coating | Without Locknut |
Loading...
Basic Information
| Type (Details) | Standard Type | Mounting Method (Details) | Screw-In | Overall Length | Standard |
|---|---|---|---|---|---|
| All Stainless | Not Compliant | Tip Heat Treatment | Not Provided | Knob | Provided |
Please check the type/dimensions/specifications of the part E-LPXAS12 in the Indexing Plungers Standard, Fine Thread series.
Specification/Dimensions
-
type
- E-LPXAS
- E-LPXKS
- E-LPXYAS
- E-LPXYKS
- E-LSXPAS
- E-LSXPKS
- E-LSXYAS
- E-LSXYKS
-
Screw Dia. M(mm)
-
Tip Outer Dia. B(Ø)
-
Stroke (S)(mm)
-
Locking Mechanism
- Nose Lock
- Returning
- Nose Lock
-
Body Material
- Steel
- Stainless Steel
- Steel
-
Length L(mm)
-
Pin Material
- S45C
- Stainless Steel
-
Pin Surface Treatment
- Not Provided
- Black Oxide
-
Main Body Surface Treatment
-
Accessories
- With Locknut
- Without Locknut
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Why is there still shaking when positioning with a indexing plunger, is it a product defect?
- Answer: Hello, first of all, the product itself has a certain tolerance range, allowing a certain amount of shaking. Product defect is only suspected if the shaking exceeds the indicated tolerance. Secondly, since the positioning holes and threaded mounting holes matching the indexing plunger are subject to some machining error, always pay attention when designing.
- Question: Why is the rod inside the indexing plunger broken/bent?
- Answer: Hello, the main stress point of the indexing plunger/indexing pin is the head part of the pin, and the middle internal connecting rod and the tail knob can only be subjected to pulling force, but not to excessive radial force. Please refer to the precautions in the product information. Always move in the axial direction during the pull-out process.
- Question: What is the meaning of load min and max?
- Answer: The min. load represents the initial load, and the max. load represents the load at the maximum press-in limit of ball head.
Products like this...
| Part Number |
|---|
| E-LPXAS10 |
| E-LPXAS16 |
| E-LPXKS10 |
| E-LPXKS12 |
| E-LPXKS16 |
| E-LPXYAS10 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Screw Dia. M (mm) | Tip Outer Dia. B (Ø) | Stroke (S) (mm) | Locking Mechanism | Body Material | Length L (mm) | Pin Material | Pin Surface Treatment | Main Body Surface Treatment | Accessories |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 17.46 | 1 Piece(s) | Available | 6 Day(s) | 10 | 5 | 5 | [Returning] Return type | [Steel] Steel | 45 | S45C | Black Oxide | Black Oxide Coating | Without Locknut | |
MYR 30.98 | 1 Piece(s) | Available | 6 Day(s) | 16 | 8 | 8 | [Returning] Return type | [Steel] Steel | 66 | S45C | Black Oxide | Black Oxide Coating | Without Locknut | |
MYR 18.04 | 1 Piece(s) | Available | 6 Day(s) | 10 | 5 | 5 | [Returning] Return type | [Steel] Steel | 45 | S45C | Black Oxide | Black Oxide Coating | With Locknut | |
MYR 22.00 | 1 Piece(s) | Available | 6 Day(s) | 12 | 6 | 6 | [Returning] Return type | [Steel] Steel | 54 | S45C | Black Oxide | Black Oxide Coating | With Locknut | |
MYR 32.22 | 1 Piece(s) | Available | 6 Day(s) | 16 | 8 | 8 | [Returning] Return type | [Steel] Steel | 66 | S45C | Black Oxide | Black Oxide Coating | With Locknut | |
MYR 21.40 | 1 Piece(s) | Available | 6 Day(s) | 10 | 5 | 5 | [Nose Lock] Self-locking Type | [Steel] Steel | 51 | S45C | Black Oxide | Black Oxide Coating | Without Locknut |
Additional Products in this Category
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy