(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Loading

  • [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Timing Pulleys Aluminum Clear Anodized MXL

Timing Pulleys Aluminum Clear Anodized MXL
  • Economy
  • Volume Discount

MISUMI

MiSUMi Economy

MISUMI

  • RoHS

Part Number

Configured Part Number is shown.

Product Overview
Usually, timing pulleys and timing belts are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.
Dimensional Drawing
Dimension and Specification for MISUMI Timing Pulleys MXL
Specifications Overview
Part Number Material Surface Treatment
Belt Width 4.8mm
(3/16inch)		Belt Width 6.4mm
(1/4inch)		Belt Width 9.5mm
(3/8inch)		Belt Width 12.7mm
(1/2inch)		PulleyFlange
A: 6 W: 10 L: 16.5A: 7.5 W: 11.5 L: 18A: 11 W: 15 L: 22A: 14 W: 18 L: 25
E-ATP□□MXL019E-ATP□□MXL025E-ATP□□MXL037E-ATP□□MXL050Aluminum AlloyAluminum AlloyClear Anodized
The flange is riveted, and set screws are included for shaft bore specs. P or N.
Specification Table
Part NumberPulley
Shape		Shaft Bore
Specs.		Shaft Bore Specs. (1mm increments)P.D.O.D.DFE
TypeNumber of TeethType & Nominal Width
 

H

Round Hole

P

Threaded hole

N

Keyway Hole + Threaded Hole

dH7
Shape AShape B・KShape B・KShape AShape B
(Aluminum Alloy)
E-ATP
14MXL019
＊A ：6
＊W ：10
＊L ：16.5



MXL025
＊A ：7.5
＊W ：11.5
＊L ：18



MXL037
＊A ：11
＊W ：15
＊L ：22



MXL050
＊A ：14
＊W ：18
＊L ：25		A

K		H


P


N		3~43~43~4--9.068.5512126
153~43~43~49.70 9.19
163~53~53~510.359.8414148
173~53~53~511.0010.49
183~53~53~511.6411.14
193~53~53~512.2911.78
20A

B		3~73~63~5--12.9412.4391811
213~73~63~513.5813.07
223~73~63~514.2313.72
233~93~73~714.8814.37112013
243~93~73~815.5215.02
253~93~73~816.1715.66
263~103~83~916.8216.31122214
274~104~84~917.4616.96
284~104~84~918.1117.60
304~124~104~98-19.4018.90142516
324~124~104~9820.7020.19
344~124~104~9821.9921.48
365~145~125~108~11823.2922.78162818
385~145~125~108~12824.5824.07
405~165~145~108~138~1125.8725.36183020
425~165~145~108~138~1127.1726.66
445~195~165~148~168~1328.4627.95203223
465~195~165~148~168~1329.7529.24
485~215~185~168~178~1431.0530.54223525
505~215~185~188~178~1432.3431.84223525
605~285~245~208~238~1938.8138.30284432
725~365~265~228~318~2146.5746.06305240
Shaft Bore Dia. 9 is not available for Shaft Bore Specs. N.
Threaded holes are not included for Shape A with Shaft Bore Specs. N.
Shaft Bore Dia. 6.35, if falling within the selection range, can be selected for Shaft Bore Specs. H and P.
Shaft Bore Dia. 9 is not available for Shaft Bore Specs. N. Shaft Bore Dia. 4.5 and 6.35, if falling within the selection range, can be selected for Shaft Bore Specs. H and P.
Specify NK10 when New JIS Keyway Hole + Threaded Hole with shaft bore diameter of 10 and keyway width 4.0mm (height 1.8mm) is requested. >>Keyway Detailed Dimensional Drawing
Product Features
Feature 1: MXL specification timing pulleys, suitable for general torque transmission design and high speed conveyance design.
Feature 2: MXL specification timing pulleys provide great transmission accuracy and efficiency, making them suitable for high-precision transmission and conveyance designs.
Feature 3: MXL specification timing pulleys have a wide range of load and speed ratios, applicable to most mechanisms and equipment.
Feature 4: MISUMI timing pulleys satisfy industrial standards, enabling for a reliable purchase and simple equipment maintenance.
Feature 5: MISUMI timing pulleys are available in various materials and suitable for a wide range of design environments.
Feature 6: MISUMI timing pulleys are made with meticulous attention to detail, allowing customers to make purchases with more confidence.
Features of MISUMI Timing Belts XL timing pulley
①Well processed teeth→High processing accuracy
②Threaded hole deburred→Longer service life of timing belt
③Evenly press-fitted retainer→Firm retainer, not easy to fall off
④Beautiful tooth shape→Precisely engaged belt, with high concentricity
Usage Method
Usage Method Example DrawingUsage Method of Timing Wheel and Timing Belt
MISUMI Timing Belt Driving Example timing pulley①Driving (The driven wheel is driven by the driving wheel for transmission)
MISUMI Timing Pulley Linear Driving Example timing pulley②Linear driving (Reciprocating motion is carried out through the free-end toothed timing belt.)
Usage Method Example DrawingUsage Method of Timing Wheel and Timing Belt
MISUMI Timing Pulley Conveyance Example timing pulley③Conveyance (Plates are conveyed by two toothed timing belts)
MISUMI Timing Pulley Traction Transmission Example timing pulley④Traction transmission (Workpieces are clamped and transmitted by the belt)
Precautions
①For Shaft Bore Specs. P (round hole+threaded hole) or N, the attached set screws are shipped in the same package (may drop in the packaging bag).
②There is no threaded hole for Shaft Bore Specs. H (round hole).
③The surface treatment may not be performed inside the shaft hole.
④For keyway dimensions, refer to Keyway Detailed Dimension Table.
⑤For the N keyway hole, the position relation between keyway and tooth is not fixed.
Example of Use
Example drawing of a ball spline lifting & rotating mechanism designed using MISUMI timing pulley timing pulley
Equipment Name:
      Ball Spline Lifting & Rotating Mechanism
Purpose:
      Rotates the workpiece received from the previous process 90 degrees to lower it and transfers the workpiece to the next process.
Purpose of Timing Pulley:
      The transmission of the timing pulley changes the direction of the collet. (Applicable to timing pulleys with specifications MXL, XL, L and H)

For details, please clickBall Spline Lifting & Rotating Mechanism.
Application Industries
Semiconductor Automotive Smart Phones
MISUMI Timing Pulleys XL are applicable to the semiconductor industry timing pulley MISUMI Timing Pulleys XL are applicable to the automotive industry timing pulley MISUMI Timing Pulleys XL are applicable to the smart phone industry timing pulley
Medical Electronic & Electrical Robotics
MISUMI Timing Pulleys XL are applicable to the medical industry timing pulley MISUMI Timing Pulleys XL are applicable to the electronics and electrical appliances industry timing pulley MISUMI Timing Pulleys XL are applicable to the robotics industry timing pulley
Related Products
Idler Toothed Timing Belts XL Toothed Timing Belts
High Torque Timing Belts S2M, S3M, S5M and S8M Drawing Long Toothed Timing Belt, Polyurethane, Configurable Number of Teeth, Joint Processed Product Drawing Free-End Toothed Timing Belt Drawing
Representative model: AATF28XL031 Representative model: TBN128XL031 Representative model: C-TBN178XL031
Advantages: short delivery time, high quality Advantages: large inventory and shipment in 1 day Advantages: low price
Related Documents
Technical Data of Toothed Timing Belts and Timing Pulleys
①Data on the selection of timing pulleys and toothed timing belts, tensioning force, etc. (drive)
②Data on the selection of timing pulleys and toothed timing belts, tensioning force, etc. (transmission & conveyance)
③Main causes and countermeasures for the damage, breakage, abnormal noise of toothed timing belts
④Reference data on the replacement time of toothed timing belts
⑤Data on dimensional tolerance of timing pulleys

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
Part Number
E-ATP14MXL019-A-H[3,​4]
E-ATP14MXL019-K-H[3,​4]
E-ATP14MXL019-K-P4
E-ATP14MXL019-K-P[3,​4]
E-ATP14MXL025-A-H[3,​4]
E-ATP14MXL025-K-H[3,​4]
E-ATP14MXL025-K-P[3,​4]
E-ATP14MXL037-A-H[3,​4]
E-ATP14MXL037-K-H[3,​4]
E-ATP14MXL037-K-P[3,​4]
E-ATP14MXL050-A-H[3,​4]
E-ATP14MXL050-K-H[3,​4]
E-ATP14MXL050-K-P[3,​4]
E-ATP15MXL019-A-H[3,​4]
E-ATP15MXL019-K-H[3,​4]
E-ATP15MXL019-K-P4
E-ATP15MXL019-K-P[3,​4]
E-ATP15MXL025-A-H[3,​4]
E-ATP15MXL025-K-H[3,​4]
E-ATP15MXL025-K-P4
E-ATP15MXL025-K-P[3,​4]
E-ATP15MXL037-A-H[3,​4]
E-ATP15MXL037-K-H[3,​4]
E-ATP15MXL037-K-P[3,​4]
E-ATP15MXL050-A-H[3,​4]
E-ATP15MXL050-K-H[3,​4]
E-ATP15MXL050-K-P[3,​4]
E-ATP16MXL019-A-H[3-5/1]
E-ATP16MXL019-K-H[3,​4,​5]
E-ATP16MXL019-K-P5
E-ATP16MXL019-K-P[3,​4,​5]
E-ATP16MXL025-A-H[3-5/1]
E-ATP16MXL025-K-H[3,​4,​5]
E-ATP16MXL025-K-P4
E-ATP16MXL025-K-P5
E-ATP16MXL025-K-P[3,​4,​5]
E-ATP16MXL037-A-H[3-5/1]
E-ATP16MXL037-K-H[3,​4,​5]
E-ATP16MXL037-K-P[3,​4,​5]
E-ATP16MXL050-A-H[3-5/1]
E-ATP16MXL050-K-H[3,​4,​5]
E-ATP16MXL050-K-P[3,​4,​5]
E-ATP17MXL019-A-H[3-5/1]
E-ATP17MXL019-K-H[3,​4,​5]
E-ATP17MXL019-K-P[3,​4,​5]
E-ATP17MXL025-A-H[3-5/1]
E-ATP17MXL025-K-H[3,​4,​5]
E-ATP17MXL025-K-P[3,​4,​5]
E-ATP17MXL037-A-H[3-5/1]
E-ATP17MXL037-K-H[3,​4,​5]
E-ATP17MXL037-K-P[3,​4,​5]
E-ATP17MXL050-A-H[3-5/1]
E-ATP17MXL050-K-H[3,​4,​5]
E-ATP17MXL050-K-P[3,​4,​5]
E-ATP18MXL019-A-H[3-5/1]
E-ATP18MXL019-K-H[3,​4,​5]
E-ATP18MXL019-K-P[3,​4,​5]
E-ATP18MXL025-A-H[3-5/1]
E-ATP18MXL025-K-H[3,​4,​5]
E-ATP18MXL025-K-P5
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipBelt Width Used
(mm) 		Pulley Shape Shaft Bore Dia. d
(mm) 		Shaft Hole Shape Number of Teeth 轴孔规
(mm) 		Operating Belt Width
(inch) 		Shaft Bore Specs. (Round Hole+Threaded Hole) [P]
(mm) 		Shaft Bore Specs. (Round Hole) [H]
(mm) 		Shaft Bore Specs. (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]
(mm) 		Shaft Bore Specs. (New JIS Keyway Hole+Threaded Hole) [N]
(mm)

-

1 Piece(s) 7 Day(s) 4.8Shape A--14-0.19-3 ～ 4--

-

1 Piece(s) 7 Day(s) 4.8Shape K--14-0.19-3 ～ 4--

MYR 23.76

1 Piece(s)Available 7 Day(s) 4.8-4P140.19-----

-

1 Piece(s) 7 Day(s) 4.8Shape K--14-0.193 ～ 4---

-

1 Piece(s) 7 Day(s) 6.4Shape A--14-0.25-3 ～ 4--

-

1 Piece(s) 7 Day(s) 6.4Shape K--14-0.25-3 ～ 4--

-

1 Piece(s) 7 Day(s) 6.4Shape K--14-0.253 ～ 4---

-

1 Piece(s) 7 Day(s) 9.5Shape A--14-0.37-3 ～ 4--

-

1 Piece(s) 7 Day(s) 9.5Shape K--14-0.37-3 ～ 4--

-

1 Piece(s) 7 Day(s) 9.5Shape K--14-0.373 ～ 4---

-

1 Piece(s) 7 Day(s) 12.7Shape A--14-0.5-3 ～ 4--

-

1 Piece(s) 7 Day(s) 12.7Shape K--14-0.5-3 ～ 4--

-

1 Piece(s) 7 Day(s) 12.7Shape K--14-0.53 ～ 4---

-

1 Piece(s) 7 Day(s) 4.8Shape A--15-0.19-3 ～ 4--

-

1 Piece(s) 7 Day(s) 4.8Shape K--15-0.19-3 ～ 4--

MYR 25.18

1 Piece(s)Available 7 Day(s) 4.8-4P150.19-----

-

1 Piece(s) 7 Day(s) 4.8Shape K--15-0.193 ～ 4---

-

1 Piece(s) 7 Day(s) 6.4Shape A--15-0.25-3 ～ 4--

-

1 Piece(s) 7 Day(s) 6.4Shape K--15-0.25-3 ～ 4--

MYR 23.66

1 Piece(s)Available 7 Day(s) 6.4-4P150.25-----

-

1 Piece(s) 7 Day(s) 6.4Shape K--15-0.253 ～ 4---

-

1 Piece(s) 7 Day(s) 9.5Shape A--15-0.37-3 ～ 4--

-

1 Piece(s) 7 Day(s) 9.5Shape K--15-0.37-3 ～ 4--

-

1 Piece(s) 7 Day(s) 9.5Shape K--15-0.373 ～ 4---

-

1 Piece(s) 7 Day(s) 12.7Shape A--15-0.5-3 ～ 4--

-

1 Piece(s) 7 Day(s) 12.7Shape K--15-0.5-3 ～ 4--

-

1 Piece(s) 7 Day(s) 12.7Shape K--15-0.53 ～ 4---

-

1 Piece(s) 7 Day(s) 4.8Shape A--16-0.19-3 ～ 5--

-

1 Piece(s) 7 Day(s) 4.8Shape K--16-0.19-3 ～ 5--

MYR 20.58

1 Piece(s)Available 7 Day(s) 4.8-5P160.19-----

-

1 Piece(s) 7 Day(s) 4.8Shape K--16-0.193 ～ 5---

-

1 Piece(s) 7 Day(s) 6.4Shape A--16-0.25-3 ～ 5--

-

1 Piece(s) 7 Day(s) 6.4Shape K--16-0.25-3 ～ 5--

MYR 23.88

1 Piece(s)Available 7 Day(s) 6.4-4P160.25-----

MYR 34.36

1 Piece(s)Available 7 Day(s) 6.4-5P160.25-----

-

1 Piece(s) 7 Day(s) 6.4Shape K--16-0.253 ～ 5---

-

1 Piece(s) 7 Day(s) 9.5Shape A--16-0.37-3 ～ 5--

-

1 Piece(s) 7 Day(s) 9.5Shape K--16-0.37-3 ～ 5--

-

1 Piece(s) 7 Day(s) 9.5Shape K--16-0.373 ～ 5---

-

1 Piece(s) 7 Day(s) 12.7Shape A--16-0.5-3 ～ 5--

-

1 Piece(s) 7 Day(s) 12.7Shape K--16-0.5-3 ～ 5--

-

1 Piece(s) 7 Day(s) 12.7Shape K--16-0.53 ～ 5---

-

1 Piece(s) 7 Day(s) 4.8Shape A--17-0.19-3 ～ 5--

-

1 Piece(s) 7 Day(s) 4.8Shape K--17-0.19-3 ～ 5--

-

1 Piece(s) 7 Day(s) 4.8Shape K--17-0.193 ～ 5---

-

1 Piece(s) 7 Day(s) 6.4Shape A--17-0.25-3 ～ 5--

-

1 Piece(s) 7 Day(s) 6.4Shape K--17-0.25-3 ～ 5--

-

1 Piece(s) 7 Day(s) 6.4Shape K--17-0.253 ～ 5---

-

1 Piece(s) 7 Day(s) 9.5Shape A--17-0.37-3 ～ 5--

-

1 Piece(s) 7 Day(s) 9.5Shape K--17-0.37-3 ～ 5--

-

1 Piece(s) 7 Day(s) 9.5Shape K--17-0.373 ～ 5---

-

1 Piece(s) 7 Day(s) 12.7Shape A--17-0.5-3 ～ 5--

-

1 Piece(s) 7 Day(s) 12.7Shape K--17-0.5-3 ～ 5--

-

1 Piece(s) 7 Day(s) 12.7Shape K--17-0.53 ～ 5---

-

1 Piece(s) 7 Day(s) 4.8Shape A--18-0.19-3 ～ 5--

-

1 Piece(s) 7 Day(s) 4.8Shape K--18-0.19-3 ～ 5--

-

1 Piece(s) 7 Day(s) 4.8Shape K--18-0.193 ～ 5---

-

1 Piece(s) 7 Day(s) 6.4Shape A--18-0.25-3 ～ 5--

-

1 Piece(s) 7 Day(s) 6.4Shape K--18-0.25-3 ～ 5--

MYR 25.08

1 Piece(s)Available 7 Day(s) 6.4-5P180.25-----

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>

Basic Information

Type Timing Pulleys Belt Type MXL Material Aluminum Alloy
Surface Treatment Clear Anodize

Configure

Clear All

780 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Belt Width Used(mm)

    • 4.8
    • 6.4
    • 9.5
    • 12.7

    Clear

  • Pulley Shape

    • Shape A
    • Shape B
    • Shape K

    Clear

  • Shaft Bore Dia. d(mm)

    • 4
    • 5
    • 6
    • 6.35
    • 8

    Clear

  • Shaft Hole Shape

    • P

    Clear

  • Number of Teeth

    • 14
    • 15
    • 16
    • 17
    • 18
    • 19
    • 20
    • 21
    • 22
    • 23
    • 24
    • 25
    • 26
    • 27
    • 28
    • 30
    • 32
    • 34
    • 36
    • 38
    • 40
    • 42
    • 44
    • 46
    • 48
    • 50
    • 60
    • 72

    Clear

  • 轴孔规(mm)

    • 0.19
    • 0.25
    • 0.37

    Clear

  • Operating Belt Width(inch)

    • 0.19
    • 0.25
    • 0.37
    • 0.5

    Clear

  • Shaft Bore Specs. (Round Hole+Threaded Hole) [P](mm)

    • 3
    • 4
    • 4.5
    • 5
    • 6
    • 6.35
    • 7
    • 8
    • 12.7

     [3-22/1mm Unit(s)]

    Clear

  • Shaft Bore Specs. (Round Hole) [H](mm)

    • 3
    • 4
    • 4.5
    • 5
    • 6
    • 6.35
    • 7
    • 8
    • 12.7

     [3-36/1mm Unit(s)]

    Clear

  • Shaft Bore Specs. (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK](mm)

    • 10

    Clear

  • Shaft Bore Specs. (New JIS Keyway Hole+Threaded Hole) [N](mm)

    • 8
    • 10
    • 11
    • 12
    • 13
    • 14
    • 15
    • 16
    • 17

     [10-31/1mm Unit(s)]

    Clear

  • type

    • E-ATP□□MXL

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 7 Day(s) or Less

    Clear

Specify Alterations

Additional Products in this Category

Tech Support

Technical Inquiry

Payment Method

more
  • Credit Card
    • VISA
    • MasterCard
  • Bank Transfer
    • FPX
    • Interbank GIRO (IBG)

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm,    9am – 1pm(Sat) * Order cut-off time is 12pm

  • Tel: (60) 3 7890 6399
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.