[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

[Clean & Pack]MechaLock - Standard (SH-MLHS50)

Click this image to zoom it.

Move the mouse over the image to zoom

Volume Discount

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■Part Number for Clean & Pack Products

· Degreasing (Anti-rust single packing)	: Part Number SL-□□
· Precision cleaning (Degassing double packing)	: Part Number SH-□□
· Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-Rust Packing	Oil removal	General Environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision Cleaning	Degassing Double Packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing Double Packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

(i)Caution

See here for related information such as technical information on cleaning effects and other cleaned product lineups.
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Part Number

Configured Part Number is shown.

SH-MLHS50

Drawing/Specifications
3D Preview
Part Numbers
More Information

*The thread diameter of the removal screw hole is the same as that of the locking screw.

Type	Main Body	Screws	Cleaning Method
Type	[M] Material	[M] Material	Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-MLHS	SUS304	SUSXM7	Degreasing	General Environment	Anti-Rust Packing	General Environment
SH-MLHS	SUS304	SUSXM7	Precision Cleaning	Class 1,000	Degassing Double Packing	Class 10

[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pcs., they are packed in 1 package (incl. 20 pcs.).
[ ! ] See the details of degreasing, precision cleaning and electrolytic polishing shown at the bottom of the

specification table.

Specification Table

Part Number

SL-MLHS35

SH-MLHS20

Part Number		D	D₁	P.C.D.	L₂	L₃	T	T₂	Locking Screw
Type	d	D	D₁	P.C.D.	L₂	L₃	T	T₂	M × L	Quantity
SL-MLHS SH-MLHS (Stainless Steel)	5	16	18.5	11.7	13	8	1.8	1.2	M3 × 10	4
	6	19	21.5	14	14.3	9	2	1.3	M4 × 12
	8	21	23.5	15.4	14.6	9.3	2	1.3
	10	23	25.5	17.5	14.8	9.5
	11	24	26.5	18.4	15.8	9.5
	12	26	28.5	20.2	18	10.5	2.5	1.5	M4 × 15	6
	14	28	30.5	22.2	18	10.5
	15	29	31.5	23.2	19	11.5
	16	30	33	24.2	19.6	12		1.6
	17	31	33.5	25.2	20.1	12.5				8
	18	32	34.5	26.2
	19	33	35.5	27.2
	20	38	42	30.8	24.1	15.3	3	1.8	M5 × 18
	22	40	44	32.8	24.1	15.3
	24	42	46	34.8	25.1	16.3
	25	43	47	35.8	26.1	17.3
	28	46	50	38.8	26.6		3.5			10
	30	48	52	40.8	26.6
	32	50	54	42.8	27.6	18.3
	35	57	62	48.4	30	19.5	4	2	M6 × 20	8
	38	60	65	51.4	30.5	20				10
	40	62	67	53.4	31	20.5
	42	64	69	55.4	31	20.5
	45	67	72	58.4	31.5	21
	48	70	75	61.4	32	21	4.5			12
	50	72	77	63.4	32.5	21.5	4.5			14

Cleaning Process
· Degreasing (Part Number: SL-□□)

Working Environment: General environment
Hydrocarbon cleaningRo water cleaning		Wash with pure water after high-pressure water jet cleaning (Ro water)		Use Oil-free Compressor		Anti-rust single packing

· Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaningRo water cleaning		Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water)		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean benchin a Class 10 clean environment

· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning		Electrolytic polishing with an electrolytic polishing layeraccording to the material		Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water)		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean benchin a Class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

Packaging type may vary
depending on some products and sizes.

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-Rust Packing	Oil removal	General Environment	Regular assembly process
Degreasing	SL-□□	Anti-Rust Packing	Oil removal	General Environment	Post battery assembly process
Precision Cleaning	SH-□□	Degassing Double Packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing Double Packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
SH-MLHS50

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Shaft Bore Dia. d (Ø)	Hub Dia. D (Ø)	Max. Allowable Torque Range (N•m)	Max. Allowable Torque (N•m)	Allowable Thrust Load (kN)	Overall Length (mm)	Outer Dia. D1 (or D) (Ø)	Cleaning Method
	MYR 783.63	1 Piece(s)	Available	6 Day(s) or more	50	72	700.1~1000.0	754.3	30.11	32.5	77	Precision Cleaning

Specifications/Overview

■Allowable Load Applied to MechaLock
kgf = N × 0.101972

Type	MLM·MLMB				MLMP			MLHS			Mass (g)
d	Max. Allowable Torque (N⋅m)	Allowable Thrust Load (kN)	Screw Tightening Torque (N⋅m)		Max. Allowable Torque (N⋅m)	Allowable Thrust Load (kN)	Screw Tightening Torque (N⋅m)	Max. Allowable Torque (N⋅m)	Allowable Thrust Load (kN)	Screw Tightening Torque (N⋅m)
d	Max. Allowable Torque (N⋅m)	Allowable Thrust Load (kN)	MLM	MLMB	Max. Allowable Torque (N⋅m)	Allowable Thrust Load (kN)	Screw Tightening Torque (N⋅m)	Max. Allowable Torque (N⋅m)	Allowable Thrust Load (kN)	Screw Tightening Torque (N⋅m)
5	7	2.8	1.9	1.6	4.6	1.84	1.9	2.8	1.13	0.88	18
6	14	4.67	3.9	3.2	10.7	2.49	3.9	7.8	2.54	2.7	26
8	22	5.6			16.6	4.1		10.7	2.64		35
10	25	5.6			19.6	3.9		12.7	2.55		40
11	30	5.6			22.5	4		14.7	2.64		45
12	50	8.41			36.2	5.9		24.5	4.02		53
14	65	9.46			50.9	7.2		28.4			61
15	70	9.46			54.8	7.2		30.4			66
16	75	9.46			58.8	7.3		32.3			75
17	110	12.6			76.4	8.9		46.1	5.39		75
18	115	12.6			80.3			49			80
19	120	12.6			85.2			51.9			81
20	220	21.6	8.8	7.5	183	18.3	8.8	121.6	12.16	5.6	144
22	290	26			201	18.3		133.4	12.06		165
24	320	26			252	21		146.1	12.16		180
25	350	27.2			264	21.1		153	12.16		188
28	380	27			295	21.1		213.8	15.2		195
30	410	27			396	26.4		229.5	15.3		208
32	440	27			423	26.4		244.2	15.2		219
35	720	41.1	15.7	12.7	548	31.3	15.7	301.1	17.16	9.6	325
38	770	40.2			741	39		409	21.48		362
40	810	40.2			779	39		430.6			380
42	850	40.2			823	39.2		452.2			405
45	1200	52.9			882	39.2		484.6			435
48	1200	48.2			1117	46.5		620.9	25.8		460
50	1500	56.3			1362	54.4		754.3	30.11		485
55	1600	56.3			1512	55		-	-	-	520
60	1900	60.3			1768	58.9					560
65	2000	60.3			1915	58.9					610
70	3400	94.8	37.3	31	2920	83.6	37.3				845
75	3900	101.5		-	-	-	-				932
80	4100	101.5									1100
85	4400	101.5									1270

■Shaft / Hub Rigidity
kgf/mm² = MPa×0.101972

d	MLM·MLMB						MLMP						MLHS
	Shaft Side Surface Pressure Mpa	Hub Side Surface Pressure MPa	H Hub Minimum O.D.			Hub Machining Depth L₁	Shaft Side Surface Pressure Mpa	Hub Side Surface Pressure MPa	H Hub Minimum O.D.			Hub Machining Depth L₁	Shaft Side Surface Pressure Mpa	Hub Side Surface Pressure MPa	H Hub Minimum O.D.			Hub Machining Depth L₁
			Yield Point Stress of Hub Material (MPa)						Yield Point Stress of Hub Material (MPa)						Yield Point Stress of Hub Material (MPa)
			206	294	392				206	294	392				206	294	392
			FC350 SS400 S10C	FCD450 S35C	FCD600 S55C				SUS304 SS400 S10C	S35C	SUS403 S55C				SUS304 SS400 S10C	S35C	SUS403 S55C
5	249	81	25	22	20	13	217	51	21	20	19	13	175	42	20	19	18	13
6	318	102	33	28	25	14	258	59	26	24	23	14	251	58	26	24	22	14
8	239	107	38	31	28	15	244	92	35	29	27	15	196	62.6	28	26	25.5	15
10	186	96	39	33	30	16	192	77	35	31	29	16	153	55.9	29	27.5	27.5	16
11	170	92	39	34	31	16	174	73	36	31	30	16	139	53.6	30	28.5	28.5	16
12	233	115	49	40	36	17	239	91	43	36	33	17	191	67.1	35	32	30.5	17
14	225	120	55	44	39	17	204	84	44	38	35	17	164	62.3	36	34	32.5	17
15	186	106	52	43	39	18	205	90	47	40	37	18	136	55	37	34	33.5	18
16	166	98	51	43	39	18	193	87	48	41	38	18	121	50.9	38	35	35	18
17	197	121	61	49	43	19	205	97	53	44	40	19	144	63.1	40	37	36	19
18	186	118	62	49	44		166	93	54	45	41		136	61.2	40	37	36
19	177	114	62	50	45		184	91	55	46	42		129	59.2	42	39	38
20	234	139	87	64	56	23	213	97	64	54	49	23	165	69.8	51	47	44	23
22	256	159	112	74	62	23	193	92	65	56	51	23	150	66.3	53	49	46	23
24	217	142	98	72	62	24	121	105	74	61	56	24	128	59.2	54	50	48	24
25	216	137	96	72	62	25	212	102	75	62	57	25	122	54.5	54	51	49	25
28	192	127	95	74	65		212	107	82	68	61		136	63.7	60	55	53
30	179	122	95	75	67		198	102	86	69	63		127	61.1	62	57	55
32	156	110	91	75	67	26	192	103	87	73	66	26	110	55.4	63	59	57	26
35	204	138	129	95	83	28	207	105	100	83	75	28	107	51.4	72	67	67	28
38	178	125	122	95	84	28	208	110	109	89	80	28	119	59.5	79	73	70	28
40	164	118	119	95	85	29	202	110	113	92	83	29	110	56.2	80	74	72	29
42	156	114	120	97	87	29	192	106	114	94	85	29	105	54.4	82	76	74	29
45	186	140	154	113	98	30	184	104	117	97	88	30	95	50.8	85	79	77	30
48	159	123	140	110	97		206	118	135	108	96		107	58.4	91	84	81
50	173	136	160	119	104		202	119	140	111	99		116	64.6	97	88	84
55	158	127	159	123	108	31	185	106	137	113	102	31	-	-	-	-	-	-
60	150	125	166	130	115		176	104	143	119	108
65	139	118	167	134	119		163	98	146	124	113
70	187	152	250	172	147	34	206	119	188	150	133	34
75	187	155	272	238	155	34	-	-	-	-	-	-
80	166	142	250	225	157	35
85	157	135	246	224	161	35

■ Features
(1) With the pilot on flange of the inner ring, tightening of the locking screw presses the hub I.D.. This generates effect to control instability on the hub end face and O.D. (centering effect).
(2) Free phase adjustment and positioning.
(3) No hub movement in axial direction when tightened with locking screw.
(4) No backlash after tightening.

■Recommended Tolerance of Shaft and Hub / Roughness of Surface

Shaft O.D.	h7 (g6)	Ra 1.6 or less
Hub I.D.	H7	Ra 3.2 or less

Basic Information

Series	Standard Type	Body Material	SUS304	Centering Function	With Centering Function
Main Body Surface Treatment	None	Tightening Structure	Single Cone Type	Structure	Mechanical Type (Wedge Type)
Locking Screw Qty.	Multiple pcs.	Characteristics/Applications	Clean washed	Environmentally friendly	RoHS Compliant (10 Substances)

Please check the type/dimensions/specifications of the part SH-MLHS50 in the [Clean & Pack]MechaLock - Standard series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

type
- SH-MLHS
- SL-MLHS
Clear
Shaft Bore Dia. d(Ø)
5

6

8

10

11

12

14

15

16

17

18

19

20

22

24

25

28

30

32

35

38

40

42

45

48

50
Clear
Hub Dia. D(Ø)
16

19

21

23

24

26

28

29

30

31

32

33

38

40

42

43

46

48

50

57

60

62

64

67

70

72
Clear
Max. Allowable Torque Range(N•m)
2.0~20.0

20.1~50.0

50.1~70.0

100.1~150.0

150.1~200.0

200.1~300.0

300.1~500.0

500.1~700.0

700.1~1000.0
Clear
Max. Allowable Torque(N•m)
2.8

7.8

10.7

12.7

14.7

24.5

28.4

30.4

32.3

46.1

49

51.9

121.6

133.4

146.1

153

213.8

229.5

244.2

301.1

409

430.6

452.2

484.6

620.9

754.3
Clear
Overall Length(mm)
13

14.3

14.6

14.8

15.8

18

19

19.6

20.1

24.1

25.1

26.1

26.6

27.6

30

30.5

31

31.5

32

32.5
Clear
Outer Dia. D1 (or D)(Ø)
18.5

21.5

23.5

25.5

26.5

28.5

30.5

31.5

33

33.5

34.5

35.5

42

44

46

47

50

52

54

62

65

67

69

72

75

77
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
SH-MLHS14
SH-MLHS15
SH-MLHS16
SH-MLHS6
SH-MLHS8
SL-MLHS10

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Shaft Bore Dia. d (Ø)	Hub Dia. D (Ø)	Max. Allowable Torque Range (N•m)	Max. Allowable Torque (N•m)	Allowable Thrust Load (kN)	Overall Length (mm)	Outer Dia. D1 (or D) (Ø)	Cleaning Method
MYR 517.31	1 Piece(s)	Available	6 Day(s) or more	14	28	20.1~50.0	28.4	4.02	18	30.5	Precision Cleaning
MYR 539.62	1 Piece(s)	Available	6 Day(s) or more	15	29	20.1~50.0	30.4	4.02	19	31.5	Precision Cleaning
MYR 545.38	1 Piece(s)	Available	6 Day(s) or more	16	30	20.1~50.0	32.3	4.02	19.6	33	Precision Cleaning
MYR 541.15	1 Piece(s)	Available	6 Day(s) or more	6	19	2.0~20.0	7.8	2.54	14.3	21.5	Precision Cleaning
MYR 478.46	1 Piece(s)	Available	6 Day(s) or more	8	21	2.0~20.0	10.7	2.64	14.6	23.5	Precision Cleaning
MYR 428.46	1 Piece(s)	Available	6 Day(s) or more	10	23	2.0~20.0	12.7	2.55	14.8	25.5	Degreasing

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

[Clean & Pack]MechaLock - Standard (SH-MLHS50)

(i)Caution

Specification Table

Part Number

Specifications/Overview

Basic Information

Configure

Specification/Dimensions

type

Shaft Bore Dia. d(Ø)

Hub Dia. D(Ø)

Max. Allowable Torque Range(N•m)

Max. Allowable Torque(N•m)

Overall Length(mm)

Outer Dia. D1 (or D)(Ø)

Cleaning Method

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm